Final Cut Pro X share fails with QuickTime Error -50

Hello!
I'm facing a very annoying issue when trying to share my project from Final Cut Pro X. It used to work perfectly fine but now I'm getting consistently "QuickTime Error -50" after FCPX exported about 10% of my project. This can be reproduced with other project as well - one time I was able to export by restarting my machine but not anymore.
My configuration is a Mac Pro early 2008 with a ATI Radeon 5770. The only recent change I did to my config was to upgrade my old graphic cards to the Radeon 5770: do you think this can be the cause of this error?
Thanks for any help,
Jean

I am also expriencing the same error. Tried every solution listed so far:
1. Switch off background rendering. Trash render files. Don't render. Export.
2. copying the project within Final Cut Pro into another project
3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
What's going on?

Similar Messages

  • Final cut pro problem when exporting with quicktime movie

    Hello!
    I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
    keyfram 10
    bitrate 6000
    faster encode
    size 1920x1080 HD 16:9
    its not a problem the movie works fine all the way.
    But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
    If you have an e-mail i can send you just the part where this happening.
    Please help me!
    Thanks Gabriel

    I am also expriencing the same error. Tried every solution listed so far:
    1. Switch off background rendering. Trash render files. Don't render. Export.
    2. copying the project within Final Cut Pro into another project
    3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
    Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
    What's going on?

  • Final Cut Pro X crashes constantly with unique error.

    Just opening FCPX 10.0.6 on my Mac Pro (OS X 10.8.2) makes it crash. From the event log, here's the only error that pops up (and it's the same one that's crashed on me 20 times today.)
    Crashed Thread:  47  com.apple.helium-render-queue-exec-unit-gpu
    Even after a wipe and reinstallation of OS X and FCPX on the Mac Pro, I still get this crash and the app is unusable.
    It's a Mac Pro 4,1 with an ATI Radeon HD 4870 card (the same card it came with).
    Any ideas? Thanks in advance!
    EDIT: I have NO third-party plugins. This is a straight FCPX install, nothing else is on the box.

    I have this same exact crash - except mine happens about 20% of the time when I adjust any parameter (ie opacity or a plugin ) of a clip that is playing IF any currently playing clip has a motion effect applied to it. Any motion effect - even ones I created.
    Happens on OS X 10.8.3 on two different macbook pros! - one from late 2011 and one from early 2008. On the new machine I have also installed a brand new 10.8.2 system on an external drive with only FCPX installed and also get this crash when booted from that.
    Lack of RAM should not cause a crash - just slow things down - but no lack here - 2008 mbp has 6GB and new mpb has 16GB.
    Otherwise these machines are rock solid. I use (or have used) them extensively for performing music/interactive video on stage where everything must work… or else.
    On the 2011 machine I forced the use of the integrated graphics for FCPX instead of the real graphics card. Also got the crash then.
    I tried with clips imported from a panasonic GH2 and from my iPod Touch. Both caused crashes, so its probably not my video clips.
    I did not have this problem in OS X 10.6.8, which i was on until a few weeks ago.
    Tried running the trial of Digital Rebellion's Pro Maintenance Tools - here's the output:
    Motion Effect
    This crash appears to have been caused by a Motion Effect.
    Suggested Actions
    Use Housekeeper to run a Comprehensive clean.
    Remove third party filters from clips, or use Plugin Manager to disable them completely.
    Relevant Line
    2 com.apple.Motion.effect 0x000000010c41fd05 -[FFMotionEffect newImageAtTime:duration:withInputStream:context:downstreamPT:channelOffset:roi: ] + 885
    Report generated by Crash Analyzer in Pro Maintenance Tools
    So I ran their comprehensive clean. Didn't help. But then again how could it? - a new totally clean system exhibited the problem.
    I can't think of any common thread behind all the machine/OS combinations besides:
    OS X 10.8.2 or 3
    FCP X 10.0.7
    Unfortunately I think i just trashed my zip copy of the last verision of FCP X to test, which i tend to keep around for a while when a new version comes out, but as 10.0.7 was fine on 10.6.8 which I was running until recently, I trashed 10.0.6. Is there any way to get older version of software from the app store?
    Thoughts? Sounds like a genuine bug to me - the amount of different configurations it happens in. I don't know why everyone isn't having/complaining about this problem.

  • HT3775 I am downloading a Final Cut Pro x project directly to Quicktime.  The movie will not play, stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

    I am downloading a Final Cut Pro x project directly to Quicktime.  The movie will not play stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

    Wow. Okay...
    I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
    My only comment would be re: your computer specs:
    BJReis wrote:
    .  This may be due to somewhat older equipment:
    GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
    To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
    4GB is right on the edge, IMHO. 16G is ideal.
    I wish you luck, hang in there, and standby for more help.

  • If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store

  • Final cut pro x dvd menu with personal backgrounds and music?

    is it possible to create with Final cut pro x dvd menu with personal backgrounds and music?

    THANKS Tom!  I miss my NERO... ;-)  ... At least personal background... Can you burn the DVD then directly from final cut or do I need another program to burn...? Cheers...

  • Will final cut Pro 7.0 work with ATI Raedon X1600

    Will Final Cut Pro 7.0 work with a ATI Raedon X1600 Graphics Card

    If you want to check other applications for compatability:
    http://roaringapps.com/apps:table

  • I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    This is quite an open suggestion, but here are some ideas which might get you started.  There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary.  I have only worked with Sony XDCAM which seems pretty good to me.  File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter.  The Sony XDCAM EX3 can produce results well up to broadcast quality.
    As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card.  Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7.    It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor.   But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
    A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to). 
    This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
    Hope this helps a bit.
    Jonathan

  • Final Cut Pro does not work with Yosemite. Can it be fixed?

    Final Cut Pro does not work with Yosemite. Can it be fixed?

    Hi Tom, I don't know if you can help me.
    I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message  "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
    HELP.
    Jada.

  • When I export from the timeline in Final Cut Pro HD, I get a general error message

    When I export from the timeline in Final Cut Pro HD, I get a general error message and the export quits. Any ideas on a fix?

    Also, if I remember correctly, Final Cut Pro HD was version 4.5. Is this what you are running?
    If so, what version of OSX and Quicktime are you running?
    x

  • HT4775 Final cut pro tab share does not work with mountain lion V10.8

    I have upgraded to mountain lion and since  than the tab share in final cut pro X is not working anymore.
    Any suggestions???  Thanks

    Trash preferences and repair permissions in Disk Utility.
    If that doesn't free Share up I'd drag app to trash, reinstall it and run repair permissions again.
    Good luck.
    Russ
    BTW, not that it matters a lot, but this is the Compressor forum.

  • HT4682 Does anybody know if Final Cut Pro X is compatible with, or equipped to receive input from MovieBox DV?

    I borrowed a MovieBox DV (by Pinnacle Systems) to try to digitize analog video from my Super 8 video camera cassettes onto my new iMac. I followed the MovieBox instructions to connect the analog video camera to the MovieBox DV and then onto my iMac. I opened first Final Cut Pro X and tried to import the digitized video, but my iMac does not seem to be recognizing or receiving the digitized input from the MovieBox DV.
    Does anybody have any suggestion on how to make this digitization work?
    Thanks,
    Novice1965

    FCP X needs a source with timecode, which means that you probably need some other tool to ingest your footage.
    Quicktime Player can probably do it (File->New Movie Recording).

  • HT201109 Final Cut Pro 10.1 crashes with Motion 5.1 custom Scrolling text and Graphics titles

    Dec 29, 2013 1:33 PM 
    found out why Final Cut 10.1 won't load my custom titles without crashing. When scrolling text in Motion 5.1 if you ad a graphic to scroll with the text Final Cut 10.1 will crash. If I remove the graphic in Motion and then load it into Final Cut 10.1 it will work.
    So Graphics and scrolling do not work. The graphics are .jpg, .png, .tiff, .psd. I don't know how to fix it. Hopefully someone out there does.
    Dave
    Final Cut Pro X, OS X Mavericks (10.9.1), 2.8 GHz Intel Core i7 & 16 GB Ram 
    Final Cut Pro Quit Unexpectedly
    Process:         Final Cut Pro [4123]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.1 (238755)
    Build Info:      ProEditor-23875005025000000~5
    App Item ID:     424389933
    App External ID: 223682791
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [175]
    Responsible:     Final Cut Pro [4123]
    User ID:         501
    Date/Time:       2013-12-28 12:37:04.233 -0500
    OS Version:      Mac OS X 10.9.1 (13B42)
    Report Version:  11
    Anonymous UUID:  E080EF73-4EC7-F729-7343-2C37817936C6

    Thanks Tom for the advice. I have four external hard disks, all of them formatted with Mac OS Extended Journaled. On all devices (2TB) I have more than half free space. They are connected either with Thunderbolt or USB3 cables. Different manufactures:  LaCie, Toshiba, WD and Samsung. I face the same crash problem if I connect a UBS drive 16GB or a any other device to the USB ports including the Sony Video camera connected with a USB1 cable. Same problem on ALL my computers! To work properly, I have to disconnect all USB devices and work only with internal hard disks. I also tried to format the MacbookPro (erasing the partitions with a new installation) but I have the same problem. I really lost hope...

  • Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?

    I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?

    Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.

  • Hi Just got a iMac A1418.21.5 I am looking for some advice on what Final Cut pro would work well with it? many thanks

    Hi Just got a iMac A1418.21.5 I am looking for some advice on what Final Cut Pro  series would work well with this set up ? regards

    How much Ram? Final Cut Pro X is the only version curently developed and is available on the App Store.

Maybe you are looking for