Final Cut Pro X = Skeet Shooting with $300

If you haven't already purchased FCPX and would like to know the effect it has once you've purchased it,
take 3 $100 bills, crumbled them into a ball, throw them up in the air and skeet shoot them into pieces.

LOL

Similar Messages

  • If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If I own a Macbook pro and an iMac can I have final cut pro downloaded to both with one purchase?

    If you purchase Final Cut Pro X at the Mac App Store, you can install it in all your Macs free of charge as many times as you want. The same applies for all the applications you purchase at the Mac App Store

  • Final cut pro x dvd menu with personal backgrounds and music?

    is it possible to create with Final cut pro x dvd menu with personal backgrounds and music?

    THANKS Tom!  I miss my NERO... ;-)  ... At least personal background... Can you burn the DVD then directly from final cut or do I need another program to burn...? Cheers...

  • Will final cut Pro 7.0 work with ATI Raedon X1600

    Will Final Cut Pro 7.0 work with a ATI Raedon X1600 Graphics Card

    If you want to check other applications for compatability:
    http://roaringapps.com/apps:table

  • I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera.  Can anyone suggest the best camera (in the 5-10,000 dollar range) ?  What hardware and software should I include in the package?

    This is quite an open suggestion, but here are some ideas which might get you started.  There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary.  I have only worked with Sony XDCAM which seems pretty good to me.  File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter.  The Sony XDCAM EX3 can produce results well up to broadcast quality.
    As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card.  Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7.    It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor.   But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
    A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to). 
    This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
    Hope this helps a bit.
    Jonathan

  • Final Cut Pro does not work with Yosemite. Can it be fixed?

    Final Cut Pro does not work with Yosemite. Can it be fixed?

    Hi Tom, I don't know if you can help me.
    I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message  "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
    HELP.
    Jada.

  • HT201109 Final Cut Pro 10.1 crashes with Motion 5.1 custom Scrolling text and Graphics titles

    Dec 29, 2013 1:33 PM 
    found out why Final Cut 10.1 won't load my custom titles without crashing. When scrolling text in Motion 5.1 if you ad a graphic to scroll with the text Final Cut 10.1 will crash. If I remove the graphic in Motion and then load it into Final Cut 10.1 it will work.
    So Graphics and scrolling do not work. The graphics are .jpg, .png, .tiff, .psd. I don't know how to fix it. Hopefully someone out there does.
    Dave
    Final Cut Pro X, OS X Mavericks (10.9.1), 2.8 GHz Intel Core i7 & 16 GB Ram 
    Final Cut Pro Quit Unexpectedly
    Process:         Final Cut Pro [4123]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.1 (238755)
    Build Info:      ProEditor-23875005025000000~5
    App Item ID:     424389933
    App External ID: 223682791
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [175]
    Responsible:     Final Cut Pro [4123]
    User ID:         501
    Date/Time:       2013-12-28 12:37:04.233 -0500
    OS Version:      Mac OS X 10.9.1 (13B42)
    Report Version:  11
    Anonymous UUID:  E080EF73-4EC7-F729-7343-2C37817936C6

    Thanks Tom for the advice. I have four external hard disks, all of them formatted with Mac OS Extended Journaled. On all devices (2TB) I have more than half free space. They are connected either with Thunderbolt or USB3 cables. Different manufactures:  LaCie, Toshiba, WD and Samsung. I face the same crash problem if I connect a UBS drive 16GB or a any other device to the USB ports including the Sony Video camera connected with a USB1 cable. Same problem on ALL my computers! To work properly, I have to disconnect all USB devices and work only with internal hard disks. I also tried to format the MacbookPro (erasing the partitions with a new installation) but I have the same problem. I really lost hope...

  • Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?

    I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?

    Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.

  • Final Cut Pro X share fails with QuickTime Error -50

    Hello!
    I'm facing a very annoying issue when trying to share my project from Final Cut Pro X. It used to work perfectly fine but now I'm getting consistently "QuickTime Error -50" after FCPX exported about 10% of my project. This can be reproduced with other project as well - one time I was able to export by restarting my machine but not anymore.
    My configuration is a Mac Pro early 2008 with a ATI Radeon 5770. The only recent change I did to my config was to upgrade my old graphic cards to the Radeon 5770: do you think this can be the cause of this error?
    Thanks for any help,
    Jean

    I am also expriencing the same error. Tried every solution listed so far:
    1. Switch off background rendering. Trash render files. Don't render. Export.
    2. copying the project within Final Cut Pro into another project
    3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
    Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
    What's going on?

  • Hi Just got a iMac A1418.21.5 I am looking for some advice on what Final Cut pro would work well with it? many thanks

    Hi Just got a iMac A1418.21.5 I am looking for some advice on what Final Cut Pro  series would work well with this set up ? regards

    How much Ram? Final Cut Pro X is the only version curently developed and is available on the App Store.

  • Can you use the Logickeyboard Final Cut Pro X Shortcut Keyboard with Final Cut Express 4?

    I'm just wondering if the Logickeyboard Final Cut Pro X Shortcut Keyboard can be used with Final Cut Express 4???

    If you mean are the shortcuts the same:
    No they are not.
    Al

  • Final cut pro problem when exporting with quicktime movie

    Hello!
    I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
    keyfram 10
    bitrate 6000
    faster encode
    size 1920x1080 HD 16:9
    its not a problem the movie works fine all the way.
    But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
    If you have an e-mail i can send you just the part where this happening.
    Please help me!
    Thanks Gabriel

    I am also expriencing the same error. Tried every solution listed so far:
    1. Switch off background rendering. Trash render files. Don't render. Export.
    2. copying the project within Final Cut Pro into another project
    3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
    Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
    What's going on?

  • HT4682 Does anybody know if Final Cut Pro X is compatible with, or equipped to receive input from MovieBox DV?

    I borrowed a MovieBox DV (by Pinnacle Systems) to try to digitize analog video from my Super 8 video camera cassettes onto my new iMac. I followed the MovieBox instructions to connect the analog video camera to the MovieBox DV and then onto my iMac. I opened first Final Cut Pro X and tried to import the digitized video, but my iMac does not seem to be recognizing or receiving the digitized input from the MovieBox DV.
    Does anybody have any suggestion on how to make this digitization work?
    Thanks,
    Novice1965

    FCP X needs a source with timecode, which means that you probably need some other tool to ingest your footage.
    Quicktime Player can probably do it (File->New Movie Recording).

  • Final Cut Pro 5.x compatible with Leopard?

    Sorry if this has been asked loads of times but I could not find the posts here.
    Does anyone know if Final Cut Pro 5.x and DVD Studio Pro 4.x are compatible with Leopard?
    Thanks,
    Rob

    I don't know what terms you ** SEARCHED **
    But the list referenced above (click on the term searched) has quite a few.
    If you work with FCP/ Logic/ ProTools, etc in any professional capacity, you may want to wait until the fallout settles. This is especially true if you use 3rd party cards & drivers. Otherwise, get a new drive and install everything from scratch.
    x

  • How to install Final Cut Pro on 2 computers with a multiple user license

    Our church purchased a multiple user copy of Final Cut Pro, and the music minister who bought it downloaded it onto his computer.  I need to get a copy onto my computer - but he doesn't know what I need to do to get a copy onto mine.  Do I have to have him log into ITunes on my computer to download it  - or is there just a file that downloaded onto his that I can get - or what?  I have seen some discussion of their being certificates for using it that he should have received - but he doesn't remember if he has anything.  Any assistance here would be appreciated - in the Final Cut Pro site it is very unclear.  Thanks in advance.

    I don't know what the procedure is to download it from Apple but you can speed things up by simply copying the FCP X  app across to your computer using either a hard drive or memory stick.

Maybe you are looking for