Final Cut Pro X stabilization not exporting like preview

Most up to date version of FCP X with Snow Leapord.
Project using 1080 AVCHD (optimised as ProRes). Some shot are very shaky and required stabilization. Looks great in the preview viewer. But, when the movie was exported, the stabilized shots looked out of phase (not sure if that's the correct way to describe it). You can see multiple impressions of the subject vibrating around. Or another way to say may be, it looks as if each frame is overlapping in the wrong place. So instead of a nice smooth shot, it looks as if I'm making a special effect.
On other projects I don't see the same problem even though media is the same.
Any ideas? Thanks!

Some people have had trouble with getting Create Disk to kick in after the encoding is finished. However, the typical error is a DSP Publishing message.
But try a fix that has worked for others: in the export window>settimgs, click the Add button (Background) then cancel.
Russ

Similar Messages

Final Cut Pro X will not export my project - error 1

Hello everyone,
So Final Cut is giving me a hard time. I have a project about 15mins long that I would like to export as a master file and it just doesn't want to work. When I first finished and tried to export, I was using verison 10.0.8. I would select master file for the export and it would just sit there, stuck on 0%. I then realized that I needed to update. I updated to 10.0.9 and tried to do the same thing again - no luck. Next, I closed final cut and trashed preferences. I then opened up and tried exporting again, same thing happened, stuck on 0%. Then I closed again and trashed preferences again. I opened final cut, turned off background rendering, and trashed project render files and event render files (as was suggested in another discussion for export problems). After doing that, I again tried to export - still nothing. At this point of course, I had trashed the render files, so I figured I should just let the project render again. I turned background rendering back on and opened my project - now it would not render! It was stuck on 0%! Okay so I closed and reopened again. I first tried to copy my whole project into a new project and try letting it render that way - nope, didn't work. So I closed and opened again. I turned off background rendering and started a new project. I pasted just a section of my video into the new project and manually rendered that section, which worked. So I pasted the rest of the video (in chunks) into the new project, manually rendering chunk by chunk. Finally I had my whole project again, and the whole thing was rendered. I tried exporting again and got the error 1 message, "The operation could not be completed because an error occurred when creating frame 373 (error -1).". This is my current state of affairs, and its driving me crazy. I just want to export my project!
Please help....Thanks

Thank you. I found it now. This is a location where I did not expect this. I tried to do this using the GUI elements controlling how clips are displayed in the time line. I also was looking for a context menu item on the clip. I did not expect it in the preferences.

Final Cut Pro X will not export Audio

Everything looks / works fine on the timeline. However, when exporting there is no audio. When trying to export audio only, I receive Quicktime Error 0. This just started happening in the last couple days. I've had it since it came out and haven't changed anything in the settings, etc. I'm clueless. I have a project that took me a couple days to put together. I've had to capture the audio using iShowU and then sync it up in Premier Pro - not a good workflow at all. Anyone have any suggestions?

Well - I was slightly wrong. I was zooming in on the timeline to do some screen captures and there actually was a cross disolve I couldn't see when zoomed out to the full timeline. So, I'd heard people having issues where dissolves are so I removed it. Sure enough everything plays (and exports) fine. However, I go to re-add the disolve and the sound again shuts off right at that point on export. Any solutions to that problem?

How do you import final cut pro projects into imovie? (like you create a pr

How do you import final cut pro projects into imovie?
(like you create a project in final cut but i want to save it, and import it into imovie..

Hi -
Mr. Ross is right, there is no direct way to export your project with all it's elements into iMovie.
If, on the other hand, you have a completed sequence in FCP that you want to export as a finished element, then import into iMovie for you to re-edit or apply titles, music, etc. you would:
In FCP:
Click on the Sequence Icon you want to export in your browser.
Go to the menu File > Export > Quicktime Movie. Give your movie a name a navigate to where you want it stored. Make sure you choose Settings: Current Settings and have the Make Movie Self Contained checked. Click Save.
Close FCP and open iMovie.
In iMovie:
Go to the menu File > Import > Movies and navigate to the movie you just exported from FCP. Choose if you want your movie imported in it's original size, etc.
Click Import. Your movie will be imported into iMovie.
Note that using this method only gives you only the elements that made up your FCP sequence, so this may not give you the flexibility you need.
Hope this helps.
MtD

Send to - Final Cut Pro XML data not seeing my Color render

Sup folks,
As always I did some lurking on these boards and consulted the manual about this issue.
Nada.
I've rendered my shots. They were all queued. They were all rendered.
When I use the Send to -> Final Cut Pro command I get the "not all your clips were rendered" warning. I click yes to see what I will get.
FCP imports the XML data and I get nothing. All of the clips in my FCP timeline generated through the Send to -> Final Cut Pro command are all of my original media prior to my color workflow. Not my graded Color renders.
I did move my renders from a local drive to an external because of data capacity. After doing so I did update my Media, Render and Project paths to the new location of my media.
I thought that would fix my problem. It didnt.
So again: my issue is that even with my shots all rendered correctly (i checked them in QT) the XML being sent to FCP through the Send to -> Final Cut Pro command is not hooking up with my renders.
Deadline tomorrow.
As always,thanks for your time

I did move my renders from a local drive to an external because of data capacity. After doing so I did >update my Media, Render and Project paths to the new location of my media.
If I'm following the sequence correctly, you rendered your material to a local drive. Then you moved it, changed the paths (in COLOR), and then tried to "Send to... FCP". Is this correct? If so, doomed to failure. In your case, you may have even moved an empty folder.
There is an ironclad and non-negotiable series of events in rendering and initiating the roundtrip. Many users regard this as a "bug". One of the first things that a user should always do is set up all the target paths before even doing the first grade. But it is essential that the target render path be set up PRIOR to loading the Render Queue. COLOR creates the receiving folder at that time, and that is where the media will go no matter what you do after the RenderQueue is loaded. Change the path, change the format... change whatever you want... the deal has been done, and all will be ignored. However, once the media is rendered and you choose Send To... FCP, then the original XML that FCP sent will be modified by COLOR and passed back to Final Cut. COLOR does NOT,repeat, NOT generate EDLs, XMLs, or any of that stuff. It only modifies original lists. That you modified the Media, Render and Project paths (probably only in the User Preferences tab) is meaningless once the project has been rendered. The Render path for this individual project is determined in the Project Settings pane, along with the render dimensions and format. However, COLOR will observe a path change AFTER the render, and edits the XML re-export to try to find the media in the newly named directory. Of course, your media is actually elsewhere, and you get a blank sequence.
Lastly, make sure that you SAVE the project after renders, to retain the "rendered" clip status -- or COLOR won't remember any of this.
jPo

Final cut pro x dissolves not working

Final Cut Pro X, dissolves not working, When I use Ribbon, Heart ect, they showup on the video flickering, will not allow me to render the video, any help would be greatly appreciated.

Sorry. That should be what's the media? What are the project properties?

Final Cut Pro X Image Sequence Export missing frames per second option?

I am using the trial version of Final Cut Pro X. I can export an image sequence but it will only allow me to do so at 30 frames per second -every single frame!
So a 10 min movie takes half an hour to export 20,000+ frames that no one on earth has time to look thru.
In my old Final Cut Express I was able to choose 1 or 2 frames per second, which was just right.
What am I missing?
Do I need to buy Quicktime Pro or Compressor to allow me to export image sequences without exporting every frame?
Why would Apple even have an image sequence export if it only allows you to export every frame, or it that only in the trial version?
Thank you

I found a free option for you, if you don't already have Compressor 4.
In FCPX create your movie. Then SHARE as a Master File.
Get MPEG Streamclip, which is a free app available here.
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
Drag your Master File into MPEG Streamclip.
In MPEG Streamclip, select FILE/EXPORT TO OTHER FORMATS.
In FORMAT: choose IMAGE SEQUENCE
In OPTIONS, choose your frame rate.

Final Cut Pro x how to export OMF?

Final Cut Pro x how to export OMF?

As far as I understand, FCPX doesn't support OMF exports, unless something has changed recently. There are some workarounds that you can do, see this post. It looks a little cumbersome though. Hope that helps you further.

Final Cut Pro Problem playing and exporting

I am having problem playing and exporting in final cut pro. I made an animation in maya and used batch render to render a folder of images then imported the folder to final cut pro but it doesn’t play properly in the video window or even when I exported to quicktime. Do u know why?
Please give me your response asap.
Thank you very much!

As the link that Russ posted describes, use quicktime player to open the image sequence and then do a save. Bringing in an image sequence directly into fcp will cause extreme performance problems in my experience.
Describe the setting (pixel dimensions, color space, etc) of the original files. One important question is whether there is an alpha channel associated with the files. You may want to change the codec when you do the save in quicktime player to something more fcp friendly like one of the flavors of prores.

Ilife Sound Effects and Final Cut Pro Sounds are not appearing in Final Cut Pro X anymore!?

Hello,
I am new to the app Final Cut Pro X. And recently when I have gone into the Music and Sound Folder in final cut pro the option for Ilife Sound Effects and FCPX Sound Effects do not appear. I have read other forums and they have said to drag the sound files into FCPX but that isn't even a option. It onlt has iTunes options, please reply back someone this is stressing me out. I don't know if it is because of Mavericks or whatever but it is driving me insane and I need help!
This is what it looks like .

This is a known issue in FCP X 10.1 and you will find many posts about it in the forum just do a search. Several solutions have worked for different users. Try the following:
1. Open and close GarageBand then relaunch FCP
2. Open and close iPhoto then relaunch FCP
3. Close and reopen FCP
4. Trash FCP preferences then relaunch FCP
Any one of these may work. Just try them in any order. Be aware the problem may recur.

Final Cut Pro Quitting Unexpectedly When Exporting Video

Currently running Final Cut Pro version 6.0.6. Never really had a problem with anything. I am trying to export a video I edited of a show which is around 2hr. 30mins. In the past, I've exported this type of file and never had any problems, just took a little bit of time. Currently trying to export at the size of 1280x720 and when I do, Final Cut begins to export, gives me an estimated time, gets to about 9% and then quits. No reason why? I have never had this before on any of my machines. I currently have about 50GB of hardrive space free, so I am really not sure why. Any ideas or suggestions would be appreciated.
-Matthew

and you can export sections til you find the problem clip.
You might also try creating a new sequence with the same settings, and copy everything from the problem sequence. This will sometimes resolve this kind of issue.
Message was edited by: Michael Grenadier

Help! Final Cut Pro unexpectedly quits during export.

This couldn't have happened at a worse time. I'm desperate to make a deadline and every time I try export using final cut pro OR compressor the program will unexpectedly quit in the middle of it. It usually happens within 10 minutes of a 40 minute export. I'm just doing a standard quicktime export of an 80 minute long movie. It was working fine only a few days ago. Anyone have any ideas what this might be? We've tried all the normal things, restarting, using final cut rescue, etc.
Not sure what else to say. We are in a huge time crunch and we can't even get it off of the computer and on to another one.
If you need any more info please ask.

Hey thanks for your help! Yes I have tried exporting a self contained movie but everytime it just quits on me. I've tried about 15 times so far. if it is a corrupt render file is there something I can do about that? Ive been trying to render it to the full render in final cut as well before an export but after about 5 minutes final cut quits. So now it quits when I render AND when I export. So ive been going through and rendering 3 minutes at a time, maybe that will help. I dunno.
thank you again,
Adam

Final Cut Pro X is neither exporting nor rendering!

Friends,
I finished working a project (film trailer), which is having a duration of 03 minutes.
I already exported the project and uploaded it in the websites.
But now again after a while when I tried to export the same project, its not getting exported.
Final Cut Pro gets Quit always.
I duplicated the project, deleted all the render files and did it again. But the same result.
My other projects are getting exported and no big issues with rendering.
The aspect ratio of the project I'm working is 2048*872 @ 24fps.
Shot on red, converted it using RED Cine X Pro to Apple Pro res 4444.
Is there any way to solve this issue?

When I had a renderproblem, not exactly as yours, I turned off the background render. Then I marked first clip on timeline and used Modify/Render Selection or the short key ctrl-R. If that worked I rendered next clip until .in my case, I found a clip that caused the trouble. Perhaps you should test that. Then I replaced the clip fresh and all worked fine.

Final cut pro HD 2 not working with new updates

recently purchased a new imac. Most of my old programs were not supported. I updated to 10.9 from 10.5. Now, all the programs are running except Final Cut pro HD 2. I get a message sayin"power pc applications are no longer supported" Any suggestions? I read in an old discussion (from 2011) that I might need to download Rosetta?

MichelPM wrote:
... or you maybe able to run your version of Final Cut under virtualization software.
I do not know which version of FCP the OP is using as I do not recognize his designation of Final Cut Pro HD 2.
However, last weekend I attempted to install Final Cut Studio 2 (Final Cut Pro 6) into Snow Leopard installed in Parallels, as a test. It failed!
Final Cut's installer suggested the following problems: not enough VRAM - 64 needed; 0 present (even though Parallels is set for more than the minimum required VRAM); and a missing video card.
I attempted to work around this problem by using Pacifist to install FCS2, which worked, as far as the installation was completed. However, when I attemped to run FCS2, a dialog box came up with indicated that same two problems and then it quit.

Final Cut Pro 2nd monitor not working properly?

Been here before a long time ago, can't remember how it was resolved.
Working in a new edit suite, FCP Studio. Two new Samsung monitors (not my choice). I want one to be my playback monitor.
I set:
Final Cut Pro > Audio/Video Settings
> Digital Cinema Desktop Full Screen
> View > External Video > All Frames
But all I'm getting is a black frame on the 2nd monitor.
They've also got one of those very flat alluminum keyboards ... where F12 becomes a sound control. I'd love to know how I can change the function key to work as an FCP action / 2nd monitor toggling on and off.
That's two questions. Would be most appreciative of an answer for either.
Ben

Hey Andy,
I did the first half of your suggestion, but not the second half. Heading down to the studio this morning ... set up in a tiny white chapel looking out across the silvery North Atlantic ... and will try the second half of your suggestion. Will also see if there are two graphics cards installed in the Mac Pro. Will also check out the Window > Arrange in FCP (something I should have checked first off).
I talked to a filmmaker who previously worked on the system, only to discover he never uses the second monitor as a full screen, but rather as a large 'bin'. Interesting.
If worse comes to worse and I can't solve it I suspect I could size the canvas window to super large and drag it over to the second monitor.
Will post back when I've tried the latest suggestions ...
Thanks you mucho guys,
Ben

Final Cut Pro X stabilization not exporting like preview

Similar Messages

Maybe you are looking for