Final Cut Pro X stürzt beim Rendern ab

Hi liebe Community,
habe seit kurzem ein Problem beim Rendern von Filmdateien bei Final Cut Pro X.
Wenn ich die Arbeit kurz ruhen lasse und FCP mit Rendern beginnt, hängt es sich jedes Mal auf und beendet sich.
Wenn ich das Programm nicht rendern lasse, läuft es ganz normal.
Genügend Speicherplatz auf der Festplatte ist vorhanden, auch der Arbeitsspeicher dürfte mit 16 GB groß genug sein.
Das Problem besteht entweder seit der letzten Systemaktualisierung oder seit ich ein paar Projektdateien und Ereignisse auf eine externe Festplatte gezogen habe (damit Final Cut nicht so vollgestopft ist).
Man muss sagen, dass das aktuelle Projekt relativ aufwendig ist, mit viel Animation und Schriften etc., sodass viel zu rendern ist. Es ist auch nur das eine Projekt, die anderen lassen sich problemlos rendern.
Was kann ich mit dem Projekt jetzt machen? Ich muss es immer wieder wiedergeben können, um zu sehen, was ich da so fabriziere...
Danke für eure Unterstützung!

Thank you so much!
I did exactly what you told me but at first it didn't solve my problem. I needed the whole project to be rendered and when I did it again FCP crashed. So I tried again: 1. deleted all render files 2. deleted the render files of all final cut events too (just to try if it helped) 3. startet rendering the project clip by clip -> marked a few clips of the project and rendered them until the whole project was fully rendered.
And now it works!
I don't know why but maybe it was too much to render for the application??
At least I know now how to solve the problem. Thank you for your help!
It's a very extensive (hope this is the right description) project so I am going to leave the background rendering turned off. Hopefully I can complete the project without further problems...

Similar Messages

  • Premiere Pro CS6 stürzt beim rendern ab.

    Hallo,
    mein premiere pro stürzt jedes mal beim rendern ab.
    ich versuche eine 1080p komposition zu rendern, hat auch bisher immer funktioniert.
    die letzten 10 mal allerdings auf einmal nicht mehr.
    ich habe die cache bereinigt, ccleaner über den pc laufen lassen, trotzdem jedes mal bei ca 60%.
    Alle clips sind ok und vorhanden. in der vorschau läuft der film einwandfrei durch.
    was tun?
    system:
    Pheonom X6 1100 3,5GHz
    Win 7 64bit
    8Gb RAM
    GTX 660 3Gb
    System läuft auf einer SSD, keine Probleme damit.

    Klingt, als wäre eine Quelldatei beschädigt. Das muss im Projekt selbst nicht zwingend auffallen, da wahrnehmungsbedingt (menschliches Holzauge und -ohr) kleinere Störungen in der Menge untergehen sowie rein technisch bedingt bestimmte Teile von Clips nie wirklich angezeigt werden. Gut möglich, dass du den beschädigten Teil am letzten Frame einer Blende oder so hast. Das kann auch durch einen Systemabsturz oder normale Festplattenfragmentierung passieren, auch wenn zuvor alles in ordnung war. Unabhängig davon müßte man natürlich auch mal die genauen Exporteinstellungen wissen. Durchaus möglich, dass du irgendeine kleine Einstellung geändert hast und z.B. bei 2-Pass VBR Kodierung einfach dein temp Ordner so rammelvoll wird, dass nix mehr geht...
    Mylenium

  • Mini-Dvi to Video out from Final Cut Pro working

    Thanx Everybody for posting reply for my post regarding running video out to external TV from Final Cut Pro in MacBook.
    It's working fine.

    @ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
    @ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
    My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • How to use Final Cut Pro with multiple user accounts?

    Hi,
    I want to use Final Cut Pro on a clean user account. How do I set it up? How can I access my old FCP library and still work on it from multiple users?
    Also, I want my DropBox account to back-up my media. Any tips?

    I use external drives as backup. But I don't trust them. And in case of fire or what ever...It is of no use...
    But I agree on your comment about DropBox. It would have been the perfect solution though.
    What else is there?
    I have a 2TB HD but these projects are huge and still growing - so I have to move my projects to several external drives. So maybe I should just work directly from external drives and skip the partition of the computers main drive? I am thinking of the disadvantage of reducing the total storage of the disk.

  • What's wrong with my Final Cut Pro 7.03?

    What's wrong with my Final Cut Pro 7.03?
    I have just started up a new project.
    Every time I try to ad a clip in top of each other a "general error" shows up. The sequence viewer turned red and it displays that I have to close and reopen the window to restore.
    The only "new thing" I do - is the use/brand of camera.
    Now I use the canon D5 mark 3 for my project (before D5 mark 2)
    What's wrong??? Do I need to update my Final Cut Pro 7.0.3 And how do I do this???
    Final Cut Pro 7, Mac OS X (10.6.8)

    Did you use Log & Import?  Or did you at least convert the D5 files before importing?  FCP doesn't work with those files natively.
    -DH

  • How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

    How do I get a folder to open up in Final Cut Pro version 6.  I'm on a MAC OS X Version 10.6.8.  The movie folders I imported on my desktop from a Lacie Rugged Triple external hard drive.   When I try to import the folder a pop up comes up that says, "ERROR: No translatin templates matching the selected XML file were found.  Unable to import this file."   When I try and drag the folder into Final Cut a pop up comes up that reads "Please choose a translation document file".  What should I do or what am I not doing? 
    Cliff

    YYou should ask this question on the Final Cut Studio forum.

  • How do I capture HDV in Final Cut Pro 6.0.6 from a Sony HDR-CX360?

    Hi. I recently upgraded to a Sony HDR-CX360 Camera. I've been importing off of Firewire with my older cameras. Now I face only being able to import with USB. It is not recognizing the camera. How do I import with this kind of camera and Final Cut Pro 6.0.6.? It works fine with iMovie.

    Hi,
    There are a couple of things I would do in your position .. first off make sure the camera is turned on and connected BEFORE I start FCP. another would be to run up system profiler and have a look in FireWire - and see (obviously with the camera connected) is it listed in there .. If not in effect the MAC is not seeing the camera and Failing that if it is a six pin on the camera connect to a six pin port .. I had issues with a Camera (Canon XHA1s) which the MAC Pro FireWire (8 pin) would not list the camera until I installed an two port 6 pin FireWire card .. It works every time now. Hope you get it sorted ..
    Jim

  • Can not get Final Cut pro to capture HD footage from Canon HV10

    Ive had soo much trouble with no success, in trying to get footage from my HD camera into Fina cut Pro HD 4.5. I can get normal dv footage when i cahnge the setting s on the camera, and Final cut pro, but HD is not been possible so far.If any one can inform me of anything, is it possible at all to capture from my camera in HD, do i need Final Cut Pro 5? Do i need pluggins? Anything!! I want to capture HD quality!
    Powerbook G4   Mac OS X (10.4.9)   1.5GB MEMORY

    You need to list the camera you are using, the settings you shot on and the settings on your sequence (easy set up etc)

  • Export Final Cut Pro 7 project to open in FCP 6?

    Is there any way to open a final cut pro 7 project in final cut 6?
    We have a bunch of older Macs that won't run FCP7, but we use for training but our hope was to upgrade the newer machines to the new Final Cut Studio, but it would be great if we could create something on the newer machines, that we could transfer to the older ones.
    We tried XML export, but it didn't look like it included filters and such, so we are wondering if there is any other way?
    Regards,
    Karl M. Moberg

    Nope. no other way.
    Shane

  • How do I connect my DSLR camera to Final Cut Pro's Camera Import?

    I recently purchased a Canon EOS Rebel T3i. I am trying to get it to record directly into Final Cut Pro, but I can't figure out how.
    It does not have a FireWire port, just a USB and HDMI output. I'm thinking it's going to need to output to the HDMI port and have some sort of interface between the Mac and the HDMI cable, but I would prefer to record directly using the USB cable.
    I was wondering if anyone knows how to do this and/or has done it before. Any help is greatly appreciated.
    Thanks!
    Zane

    I haven't got a DSLR but I think they probably import like most AVCHD camcorders.
    You connect it with a USB cable and switch it on.
    You then set FCP X to import the video clips.

  • Final Cut Pro 6 on Mac OS Snow Leopard installation problem HELP!!!

    After 2 - 3 hours of installing all 10 FCS 2.0 discs and Software Updates, I can't seem to launch Final Cut Pro 6.0.6. I get *"...software maybe damaged or not installed.."* So I removed all of them and only custom-installed Final Cut Pro 6.0.6. It works with no problem!!! Then I custom-installed Soundtrack, Motion, DVD Studio Pro etc..., I can't launch Final Cut Pro 6.0.6. again! What the **** is going on? I get that "damaged" warning and Final Cut Pro icon is replaced by missing application icon.
    My Mac Pro also has _Pro Tools 8 LE_ with _003 Mixer Rack connect to USB_. That's it. No other application. You think this is maybe causing the problem?
    Anyone having similar problem?

    https://discussions.apple.com/docs/DOC-2494
    Carbon Copy Cloner is pretty simple to use.  If you have any questions, post back or read the documentation.  As I said in the user tip, test your clone after you make it to be sure it is bootable and your apps work.

  • Comparing video quality of AVCHD BluRay discs using Final Cut Pro Share vs Compressor

    Up front, I will admit to being a newbie when it comes to using Final Cut Studio 3 and would appreciate some feedback from the Apple forum experts.
    I have spent a lot of time trying to determine how to achieve an optimum group of Compressor 3.5.2 settings so that the playback video quality of an AVCHD BluRay disc is equal to or better than one created by using the simpler auto settings of FCPro Share, version 7.0.2.
    When using Compressor’s auto/default maximum settings, I experienced the same error message reported in:
    Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5
    https://discussions.apple.com/message/12073794#12073794
    I have since made some Compressor AVCHD Discs with smaller bit rate settings and compared video quality with a single FCP Share AVCHD disc.  Both seem to be equal in providing a very good video when viewed on my new Panasonic DMP BDT 310 BluRay player. However, the Compressor AVCHD discs show some motion artifacts not present with the FCPro Share version, especially when scrolling text or when objects are moving through the field of view, and visible artifacts are seen from a stationary chain link fence and other lattice work in the background of the video sample.
    My sample video used for the comparisons between Compressor and FCP Share discs is a 21 minute duration home movie, originally captured from a mini DV, Canon HV30 1080i camcorder using ProRes HQ encoding(1440x1080), and dragged into FC Pro 7.0.2 timeline where 10 chapter markers have been inserted. 
    To create an AVCHD disc using FCPro Share, Markers are used to set the IN and OUT points, Select IN to OUT from the timeline, pull down File Menu Share, Select Create BluRay from options in pop out Share pane, and designate output device along with picture files for Background, Logo, and Title options. When these are completed, click on Export.  My 21-minute video required almost two hours for encoding including about 10 minutes for burning. This accomplished on an iMac 3.06 GHz Intel Core 2 Duo.
    To prepare this same 21-minute video for use with Compressor, I again Select IN to Out from the FCPro timeline, but this time use File Export as a QuickTime Self Contained movie including Chapter markers. Then Open Compressor, choose Create BluRay from Template pane, right click on the down arrow in the Batch window and load the QT self contained movie file. From there I went to the Inspector window and tried various combinations of bit rate settings along with Frame Encoder options such as Better or Best motion parameter controls.
    I have tried the following combinations of Bit rate settings along with varying Frame Encoder controls and burned an AVCHD disc for each example:
    Example A
    Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings OFF. Approximately 4 hours to encode although the time remaining estimator indicated a larger value of ~7 hours; not an accurate estimator at all. 
    Example B
    Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motionadaptive)” settings. Approximately 4 hours to encode, not the 13 hours that were estimated.
    Conclusion: Comparing A & B Compressor versions, Disc B showed some improvements in reducing motion artifacts over Disc A.
    Example C
    Compressor set to 13 Mbps Average and 15 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. DeInterlace was checked. Unknown hours to encode; about 8 hours done overnight..
    Conclusion: Disc C showed some minor improvements reducing motion artifacts over Disc B
    Example D
    Compressor Auto settings,i.e., 15 Mbps Average and 17 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. Approximately 12 hours to encode, done overnight. Inserted disc next morning after the overnight encoding was completed, and a few minutes later an error message pane appeared that the maximum bit rate had been exceeded.  This message was consistent with the Apple posted thread referenced above. Unfortunately the long overnight encoding was wasted.
    It seemed to me that the best Compressor settings for suppressing the motion artifacts were displayed by the disc burned in Example C, i.e.,  13/15 Ave/Max Mbps with“Better” Motion settings in the Frame Encoder.
    However, when this disc was compared to the AVCHD Disc burned using the FCPro Share, the latter still seemed much better. I do not know what the auto bit rate values are as set in FC Pro, but for me, the quality is quite good AND the motion artifacts are significantly reduced, especially evident with the scrolling text.
    Sorry about this long post, but I thought the detail would be necessary for the experts, and maybe helpful to others trying to get started in this BluRay arena.  Did I misuse Compressor?  I think the sample video exported as a self contained QT movie was the right thing to do?  Not sure where I went wrong.
    Thanks in advance for Feedback and Recommendations.  For now, I’m going to stay with the simpler process using Final Cut Pro Share function.
    BoBo

    Thank You, Brad, for responding;  glad to hear I'm not the only one having similar Compressor issues.  
    You may have hit on something.  Perhaps Compressor's use of H.264 encoding was the reason for my motion artifacts?  And perhaps Final Cut Pro Share retains the 1440x1080 quality as it burns the AVCHD BluRay disc?
    I had Toast 10 for less than 30 days a couple of years ago, and was lucky to get a refund.
    What version of Toast do you have?  Wondering if new Toast 11 has improved previous bugs, especially upgrading its Chapter text, pictures, music.  I would go back to Toast if it came close to mirroring DVD Studio Pro, or even iDVD capabilities.
    Thanks,
    BoBo

  • HT201109 Final Cut Pro 10.1 crashes with Motion 5.1 custom Scrolling text and Graphics titles

    Dec 29, 2013 1:33 PM 
    found out why Final Cut 10.1 won't load my custom titles without crashing. When scrolling text in Motion 5.1 if you ad a graphic to scroll with the text Final Cut 10.1 will crash. If I remove the graphic in Motion and then load it into Final Cut 10.1 it will work.
    So Graphics and scrolling do not work. The graphics are .jpg, .png, .tiff, .psd. I don't know how to fix it. Hopefully someone out there does.
    Dave
    Final Cut Pro X, OS X Mavericks (10.9.1), 2.8 GHz Intel Core i7 & 16 GB Ram 
    Final Cut Pro Quit Unexpectedly
    Process:         Final Cut Pro [4123]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.1 (238755)
    Build Info:      ProEditor-23875005025000000~5
    App Item ID:     424389933
    App External ID: 223682791
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [175]
    Responsible:     Final Cut Pro [4123]
    User ID:         501
    Date/Time:       2013-12-28 12:37:04.233 -0500
    OS Version:      Mac OS X 10.9.1 (13B42)
    Report Version:  11
    Anonymous UUID:  E080EF73-4EC7-F729-7343-2C37817936C6

    Thanks Tom for the advice. I have four external hard disks, all of them formatted with Mac OS Extended Journaled. On all devices (2TB) I have more than half free space. They are connected either with Thunderbolt or USB3 cables. Different manufactures:  LaCie, Toshiba, WD and Samsung. I face the same crash problem if I connect a UBS drive 16GB or a any other device to the USB ports including the Sony Video camera connected with a USB1 cable. Same problem on ALL my computers! To work properly, I have to disconnect all USB devices and work only with internal hard disks. I also tried to format the MacbookPro (erasing the partitions with a new installation) but I have the same problem. I really lost hope...

  • Final cut pro crashing with slide show photos

    I am working with a large slide show - a few movie clips, but mostly still images from Aperture.  The photos were shot wtih a Nikon D300 in Raw, not that I think that matters much at all.
    Becasue this is a slide show I am working wth short durations for the images - usually 3:14.  Most of the transitions are simply cross dissolve, but some are more complex.
    I am getting again and again crashes - or the spinning color circle going to oblivion and requiring a Force Quit. 
    Either can happen when adding new material, moving arround existing material, or trying to reset durations, add text, different transitions, or working wth the Ken Burns options.  Sometimes it also happens when resizing the time line zoom level.   This marvelous feature seems the most consistent way of trashing the application so I tend to leave it alone.
    I may be able to work for an hour or only a few minutes.  Sometimes deleting and re-adding an image seems to help, but that may not be true - most of the time it's just simply random.   The system has 14 Gig Ram and I am using iCleanMemory now to see how much is in play.  A crash / freeze may occur with a lot or a little - usually looks like I have about 8.9 Gig in play for normal use of Final Cut and no clear change when it crashes / freezes.
    Clearly the images are compatible - they are from Aperture and there is no consistency in always the same image being the issue.  
    Below is the first part of the error report dump. 
    Hoping someone has an idea for how to overcome this.
    Appreciate the thoughts.
    Cheers -
    Dan
    Process:         Final Cut Pro [1012]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0 (179114)
    Build Info:      ProEditor-179110400~1
    App Item ID:     424389933
    App External ID: 3491984
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [202]
    Date/Time:       2011-08-17 17:57:45.775 -0600
    OS Version:      Mac OS X 10.7.1 (11B26)
    Report Version:  9
    Interval Since Last Report:          50891 sec
    Crashes Since Last Report:           1
    Per-App Interval Since Last Report:  2401 sec
    Per-App Crashes Since Last Report:   1
    Anonymous UUID:                      D1C2721F-974C-4845-BFD9-2EA572309772
    Crashed Thread:  17  CVDisplayLink
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x000000010371ed40
    VM Regions Near 0x10371ed40:
        IOKit                  00000001036ff000-0000000103700000 [    4K] rw-/rw- SM=ALI 
    --> MALLOC_TINY            0000000103700000-0000000103800000 [ 1024K] rw-/rwx SM=COW 
        MALLOC_SMALL           0000000103800000-0000000103885000 [  532K] rw-/rwx SM=ZER 
    Application Specific Information:
    objc[1012]: garbage collection is OFF

    Well, I filmed many of those videos in HDV (the 2x2 wall, the 5x5 wall and some of the 10x10 wall). Plus I converted the whole project to HDV because it is the way I displayed it (thru camera to Plasma TV's) and I wanted the HD space to work with and since part of my videos were HDV I figured that would be best.
    Of course the DV footage is not so good quality, but when made very small for that big screen it looks fine I think. Yeah the AIC codec is great but it takes 4 times as much room, but you think that would work better hey?
    I just don't want Final Cut crashing like that. I don't care if it can't play it back in real time or it takes 10 seconds to display 1 frame.
    I have not used motion....would it work for what I did. Remember I used over 100 discreet video streams I had. I don't want to replicate the same layer...you get the drift.
    Did you see it in youtubes HD? What did you think of the quality?

Maybe you are looking for