Final Cut Pro X to iDVD

Is there a way to export video from final cut so that iDVD won't render it for the second time. Because it is very inconvenient to wait an hour and a half for final cut to render a video and than one more hour for iDVD to rerender it.
Thank You.

ok. Than is there a way to export video from final cut in the most quick way?

Similar Messages

  • I export from final cut pro 7 to idvd everything comes out fuzzy on the dvd

    I film using a canon fs10. I edit in final cut pro 7, then export to quicktime format, then I burn the dvd using idvd. But the final product always comes out blurry and fuzzy. I can't see what I am doing wrong. Is it because I am not filming in HD?

    Using iMovie, for one, is capturing your files to a codec other than one FCP wants to work with. You would be better off dragging and dropping the files from the camera to a folder on an external drive and converting the footage with MPEG Streamclip to whatever codec you want to work in.
    Using iDVD to compress and author the dvd takes away any control you have over the compression settings for the project.
    You'd be well off getting a FCP training book from someplace like Peachpit Press, or a training dvd from someone here or out there who produces them.

  • Can I export from Final Cut Pro X to iDVD?

    Switched to FCP X because iMovie was breaking down. Question: can I export my finished project to iDVD?

    1920x1080, 29.97fps, Stereo, 48kHZ
    Is that all you might need to know? If not, just me know. I'm not sure how to find out any more info. Sorry, I'm not too tech savvy.
    Thanks.

  • Final Cut Pro 7 Quicktime Codecs?

    I found that Final Cut Studio 7 does not work properly in Mavericks OS X 10.9. FCP crashes, and iDVD doesn't burn. So I created a partition on my Mac Hard Drive and installed Snow Leopard 10.6.8 on the 2nd partition so that I could continue to use Final Cut Pro 7 and iDVD. I then installed Final Cut Studio, updated it, and my computer will not open HDV 1080p30 quicktime files. The files worked before updating to Mavericks, and they worked in Mavericks, but they don't in my new partition. Apple said that in the past you could download these codecs from Apple but they no longer have them. Does anyone have any suggestions? Thanks a bunch!
    Dan

    I have run all the updates on 10.6.8 partition. I may try reinstalling FCP 7.
    Thats good to know that FCP 7 does work on 10.9 for you. Its possible that my disk it faulty and the software just pushes it too hard in the new OS.
    I was having one other problem with FCP 7 that I solved and would like to share. I was having trouble with the "Share to DVD" function. The files would process, but when I would insert a blank DVD, it said "The disc cannot be created because another application is using the drive." If anyone else has this problem, just go to system preferences, click "CD's & DVD's," and change "When you insert a blank DVD," to Open Finder. The DVD burned fine after that.
    I never had trouble with FCP on 10.6.8 in the past but FCP 7 in 10.9 may be asking more from my hardware, and I think that is why its crashing. Until I can get that fixed, I am going to try installing FCP 7 again in my partition. If that doesn't work, any codec solution would be appreciated. Thanks X for the response!
    Dan

  • If i edit in final cut pro x, how can i create a dvd

    What is the best DVD creator to download to create DVDs  from movies edited in Final Cut Pro X?

    iDVD gets my top vote - it is no longer available from Apple, but still part of the retail iLife 09 or 11 versions available from online resellers. It offers customizable menus/themes which will give your creation a professional look. It encodes/authors and you can burn directly from it.
    Second is Roxio Toast (no customizable menus, but many other features and an excellent burn software).
    I've tried DVD creator and found it to be too simplistic. Then there is Burn (free) - it burns.
    I use iDVD to "create" and Toast to burn.

  • How do I achieve a high quality PAL SD DVD from Final Cut Pro?

    From a PMW-EX1 camera file edited in Final Cut Pro I am unable to produce a high quality PAL SD DVD using compressor and DVD Studio Pro (tried multiple combinations).
    Using Final cut pro and Magic iDVD I can achieve a high quality SD DVD with no changes in export.But am limited to the iDVD restrictions.
    From discussions it appears using compressor and DVD Studio pro it is not achievable, it is very frustrating that the Apple product you have to buy is not as efficient as the free one?
    If not possible then how do I access the encoded file from IDVD?
    My Final cut pro sequence settings:
    General - Aspect ratio: HDTV 1080i (16:9) 1920x1080, square and upper(Odd)
    Quicktime video settings compressor: xdcam ex 1080i50 (35 mb/s vbr)
    I

    iDVD does everything automatically for you. With DVDSP and Compressor, all steps must be done correctly. The trade off is that you achieve better quality using Compressor over iDVD.
    1. First thing to do is export your sequence as an uncompressed interlaced 25i 720 x 576 16x9 Anamorphic QT.
    2. Determine your optimal bitrate by using a bitrate calculator. Here's a good one. Remember you need to account for all video on the disc, including motion menus.
    http://www.videohelp.com/calc.htm
    3. Bring your down converted QT into Compressor and use the manual settings set your bitrate. Also encode out a Dolby digital AC3 file. These files take up less bandwidth than uncompressed audio. Also remember to match your upper fiiled dominate filed order as well in Compressor. This must be consistent throughout the export and encoding stages.
    4. bring your encoded video and audio files into DVDSP and author

  • Burning a video from Final Cut Pro using iDVD

    When I export and save my video from Final Cut Pro to a folder (export->Using Quick Time Conversion). When I do that there are several different videos that are saved in my folder (ie-Kelly Michelle; Kelly Michelle-av1; Kelly Michelle-av2; Kelly Michelle-av3; Kelly Michelle-av4; Kelly Michelle-av5).
    iDVD is the program I need to use, I do not have any other programs. Therefore, I import the file to iDVD and once everything is ready in iDVD I try to burn the dvd. However, in the last stages of burning a window pops up and says that "an error was found during the burning process". It does not tell me what kind of an error it is. Does anyone have any advice or a step by step process that I need to do in order to burn my dvd successfully.

    The simplest way to prepare a video for iDVD is to *Export/Quicktime Movie* (NOT Using Quicktime Conversion), select Current Settings, Audio and Video and, depending on your needs, other 2 options:
    o- +Make Movie Self-Contained+ is preferred to have an independent movie (you can move the exported file, you can continue editing your FCP project before burning the exported version, etc.) but requires more disk space and more time for exporting.
    o- +Chapter Markers+ (NOT All Chapters) must be selected if you created Chapter Markers in FCP (markers in the timeline, not the clip, and clicked the Add Chapter Marker button in the marker dialog).
    The resulting .mov file (whether self-contained or reference) may be easily imported to iDVD.
    Piero

  • 16:9 Export trick from Final Cut Pro to iDVD

    If this is posted, I have not seen it. I have spent years trying to get a decent photo quality video on my widescreen tv without peoples faces looking like 4 pixel blocks. I think I have found a pretty decent result.
    This is for Photo Slide shows only. (If you are going to mix widescreen video with photos, you must have the video in the timeline before you change the sequence to Anamorphic.)
    Create my widescreen project in Final Cut Pro
    (Photos have already been custom cropped (16x9) and reduced to 960 px in height before importing. iPhoto does this easily)
    Sequence settings in FCP: Use the default settings just check anamorphic. Also, best compressor for photos seems to be DVCPRO.
    When project is ready to export, Export to Quicktime Movie
    Setting: Custom (the Sequence Editor pops up)
    In the Aspect Ratio drop menu select "HDTV 720p (16:9) This will change the aspect ratio to 1280x720. All other settings should match your sequence settings.
    Export
    Open the movie in QT Pro. Select the Video Track in the Movie Properties
    Check Preserve Aspect Ratio
    Change the Height to 480 (the width should automatically change to 853)
    Close the movie and save changes.
    (This step really does make photos clearer)
    iDVD will read this as widescreen and create descent non pixelated SD quality on your Widescreen TV.
    If you have a better way to do this, or can get better quality than this achieves, I would be interested to know.
    Profe

    Hey Mish.
    I use 960 px because it is double the minimum 480. That allows me to use zoom animation or crop further without losing quality. I guess I would not have to go as high as 960 but its a number easy to remember.
    As for your questions about my methods. I am one of those Final Cut Users that really does not understand how things work. I am just good at using it to create my movies. So what you say is Greek to me. Also, for some reason, I do not have Compressor application that so many people talk about in the forums. I just got so fed up with the crappy result I got with just exporting with the same settings as the sequence. The result was pitiful. If you think of a better result using different sequence or export settings, I'll try it.
    I do a Highlights DVD project once a year. It's about 2 hours long (photos and video) and this method has given me the best ever result. It's my last year doing it so I don't want to invest in any software. My buddy would also tell me to use DVDSP and I've used it a couple of times but there is so much to it that I always forget what to do. So I have to "play nice" with iDVD
    Profe

  • 16:9 movie exported from Final Cut Pro X showing up as 4:3 movie in iDVD

    I have exported a movie from Final Cut Pro X in 16:9 and when I open it in iDVD (also in 16:9 mode) it shows up as a 4:3 video.

    SD video?
      http://www.fcpbook.com/Video9.html

  • IMovie to iDVD or Final Cut Pro to DVD studio pro "Better output"

    I recorded some family videos onto a computer with a WinTV pci board.
    Converted the MPEG2 to DV/DVCPro NTSC on my Mac with MPEG stremeclip.
    Used quicktime to divide the tapes/clips where we had switched recordings.
    Now i was going to use final cut pro but i am starting to like imovie 09.
    I want to take the clips and add simple fades mostly cross dissolve fade to black and just nothing something not noticeable. Then once I have combined the events reasonably. I want to put them onto DVD.
    Say our christmas videos
    One DVD with each year christmas event.
    And one for someone's birthdays through the years.
    If you need me to elaborate ill try harder.
    So should I use Final Cut Pro then have DVD studio make the DVDs Or iMovie 09 and iDVD 09. Which would have the best looking output.
    Oh by the way how can i remove the static feedback from the recordings I don't care which application i need tell me which one.
    If someone needs an example of the main sound i don't want ill post one.
    Note: I will be posting this in the Final Cut Pro forms as well.

    Since you have both, you should run both and see if you see a difference.
    I would expect that a $1,400 product would outperform a $20 product (= 1/4 of iLife).
    But the question is, How much better? and is it worth the extra effort to you? Only you can decide that.
    Another option for you to consider is you can edit in iMovie and export your project to Final Cut Pro in XML. Might be the best of both worlds.
    Message was edited by: AppleMan1958

  • Final Cut Pro to iDVD

    I am using Final Cut Pro to edit video which I am then burning to disk using iDVD. What is the best compression format to use in my settings H.264, DV/PRO NTSC, or some other? I have been using DV?pro NTSC but it seems to take a long time to encode a disk.

    Well, iDVD expects a DV file. If you are using some other format within FCP, I would edit in the native format (IE, if using DVPro 50, some version of uncompressed etc) and then export out of FC as a QT DV movie. This might take a little time if you are going from a higher quality codec down to DV. If you started with DV, this won't take much time at all unless you are making the movie self-contained. iDVD takes your DV QT file and compresses it to the MPEG 2 format for DVD playback. The compression stage takes quite a bit of time and is very processor intensive. On my old G4 iMac 800, a 90 minute segment could take up to 12-16 hours to compress. Duals will compress much quicker.
    Mike

  • TS1233 How do I get chapter markers for iDVD from Final Cut Pro X?

    It seems like a tremendous short-coming that Final Cut Pro X doesn't allow for chapter markers that can be used in iDVD or DVD Pro. Surely there is some way to get used-defined markers from Final Cut Pro X or at least re-define the Final Cut Pro X markers in the DVD authoring applications. Does anyone know how to do this?

    I have decided to say that my problem is solved by the work-a-rounds that have been submitted. I STILL don't like the fact tha Apple has decided that DVD's are a thing of the past and therefore (chapter) markers are of no use. That may be true is the publishing world of YouTube, Vimeo, etc. but it certainly NOT true for many of us advanced hobbyists that still like distribution on DVD's to our friends or a more localized (private) community -- especially to those who are not computer literate. If Apple wants to exclude us from their customer base, I suggest that base will become even smaller than their competitors who still have chapter markers in their products. I'll get off my soapbox now. . .

  • IDVD Refuses To Recognize 15:9 NTSC Anamorphic from Final Cut Pro

    I read the following article on getting iDVD to recognize an anamorphic 16:9 video from Final Cut Pro:
    http://support.apple.com/kb/TS2179
    My movie says it is in 16:9 anamorphic in QuickTime Pro, and the window is sized properly, but when I drop the movie into an iDVD project, it comes in 4:3, even though I selected a 16:9 iDVD theme to start with.
    Anyone have any ideas as to why iDVD is ignoring my movie's aspect ratio?

    I found out that I had to choose "Anamorphic" for the timeline in Final Cut Pro to fix the problem.

  • How do I burn an iMovie to a CD without iDVD or Final Cut Pro?

    iMovie Problems
    I have iMovie for my iPad.  Recently, I made a three minute or so long video, but when I attempt to copy it to iTunes, it does not show up in Home Sharing.  This is really frustrating me because everyone is saying I need iDVD or Final Cut Pro, but I don't have a Mac, I have a Windows computer.  It says, "sending project to iTunes" but nothing shows up.  Both my dad and I are really getting frustrated, and this is really not what I had in mind when I wanted to "bond" with my dad on Fathers' Day.  Please, anything helps.

    Videos in the camera roll will be imported using whatever program windows uses to import photos from a camera.
    It should be wherever windows puts photos /videos imported from cameras.
    It won't be in iTunes.

  • I need to burn a Final Cut pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn one just using Final Cut Pro? and can I go through IDVD?

    I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!

    I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!

Maybe you are looking for