Final Cut Pro4.5 and Leopard

I bought an iMacG5 2.8Intel Core 2 Duo, 2.8GH, with installed OS Leopard. As I startet the installation of Final Cut Pro 4.5 (first with fire wire cable from my old iMac (OS Tiger) it appeared a notice saying
" Fault of configuration
for this software you need certain hardware ore software, which is missing.
AGP-Grafikkarte !! "
Now I installed FCP directly from the FCP-discs. But the same notice appeared. Besides I installed all updates available. My question: does FCP 4.5 not work under OS10.5.1 ? Do I need a newer version of FCP? Who can help me.

Hi Florita,
Welcome to the forum!
FCP 4.5 on an intel Mac running Leopard?
I'm afraid that's not a good plan!
4.5 is not designed for newer Mac and OS.
The forum is full of helpful threads about this topic.
I just pass you one link:
http://discussions.apple.com/thread.jspa?messageID=5960983&#5960983
You can find more by using the search tool on the right
hand side of the forum page.
Good luck,
Gogi

Similar Messages

Final cut studio and leopard

i need to know if final cut 5 (final cut studio) will run with leopard os x

While I think that Leopard is a fine new OS, and I love it, I CANNOT RECOMMEND that you install it on a Production machine. There are just too many reports of issues, and really, Leopard adds nothing to the Final Cut Suite. New versions of the OS are notorious for not working with everything...and currently it DOES NOT work with many Adobe products. There are also many third party devices that may need to be checked into, like ATTO cards, eSATA cards, Firewire cards, capture cards....many many things.
If you have a good working machine, stick with Tiger. The new OS is nice and slick, but has YET to get a clean bill of health for any version of Final Cut Studio.
Shane

Subject: Final Cut Studio and Leopard

Has anyone in this forum worked with any version of Studio after installing MacOS 10.5?

Walt:
Check these * Threads about 10.5 in FCP Forum *.
Hope that helps !
Alberto

Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

My existing movies are all the following types straight from FinalCut
Apple Intermediate Codec, 1920 × 1080, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
This particular movie is 6.66 Gb
The new Quicktime player in OS Mavericks converts these to the following format:
Apple ProRes 422, 1920 x 1080
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
And a movie size of 6.48 Gb
Please, please can someone tell me why?

Someone help please!! half of final cut motion and soundtrack not working

Please help ! after i had to re-install my tiger after a leopard crash, my final cut soundtrack and motion bounce once in the dock, and then nothing happens. Everything else works fine. updated the latest updates too!. cannot re-install apps all greyed out. content disks where stolen so re-install is not a option. Please help. Final cut studio 2 half working? I'm a student and my project is due last week. Please help!

You need to re-install. I don't see any way around it. If you've altered the OS, you need a complete re-install.
Patrick

I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am

I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
Thank you

Assuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
Regarding FCE, there is no way to download & install the product. You need an original FCE install disk and your FCE serial number.
Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store.

Final Cut, Quicktime, and Pro Tools conflicts

Hi there,
I'm working on a "situation" I recently encountered, and wonder if anybody else has had this problem.
I'm trying to upgrade Pro Tools LE to version 6.9.2 with the install discs that were sent to me from Digidesign, and it's wreaking havoc with Final Cut Pro and Quicktime.
Initially when I installed the upgrade, I was running OSX 10.4.2, FCP 5.0.3 and QT 7.0.2. The Pro Tools upgrade worked fine, as did FCP when I launched it, but Quicktime wouldn't launch- spinning beachball forevermore.
So after doing all the basics- trashing pref's and render files, repairing permissions, etc.- and finding QT still wouldn't work, I tried upgrading to QT 7.0.3.
Once I did that, QT still wouldn't work, and Final Cut Pro would no longer launch. It just hung on the application startup screen, at no particular point each time.
I then upgraded to FCP 5.0.4, and as well OS 10.4.3. No luck. I installed the Pro Application Support updates 2005-02 1.0, and 3.1, and still no luck.
Since there is not yet a downgrade from QT 7.0.3 to 7.0.2, I ran the 7.0.2 to 7.0.1 installer, and downgraded to QT 7.0.1. QT still wouldn't launch, and FCP still hung on launch but this time it hung at the point where it was loading audio filters.
I tried removing the audio filters from their folders to see if it would launch then, but that didn't work. At this point, the only thing I could think to do was to uninstall Pro Tools altogether (safe uninstall, not clean uninstall) and this is what finally brought Quicktime and Final Cut back to life. Great, because I use FCP and QT everday, but I no longer have the use of Pro Tools.
Throughout this process I made sure to diligenty repair permissions, trash prefs, and restart whenever I made a change.
So I'm not sure at this point how to get Pro Tools LE 6.9.2, Final Cut Pro 5.0.4, and Quicktime (any version above 7.0) to work harmoniously, and I'm unable to spare any more troubleshooting time for a week or so because there are of course, projects due.
Has anybody else encountered these oddities?
Thanks a lot,
Joni

Hi, Joni C
I'm Bump,
I'm having the same trouble, I have FCP I'm running it on a G5 power Mac dual 2.5 ghz with 2.5 gb of memory, my os is 10.4.4. I also have Quicktime pro 7.0.3 and I have Pro Tools LE 7.0, every time I try to use FCP it starts and about five sec. later it shuts back down. I also have a Universal Audio UAD pci card that runs audio plugins and I also have fxpansion program it converts my vst & Au plugins to rtas for pro tools le. IBefore I installed FCP I wiped my hard drive and re installed a fresh version of tiger 10.4 and then I installed FCP studio, then Pro Tools, then all plugin and kept checking to make sure every thing was working correctly and then the U audio stuff with the Vst to rtas wrapper and it all was working fine. I even did the full final cut tutorial still worked fine. Yesterday out of no where final cut just stop working and still all the other programs work fine like dvd studios, soundtrack, motion, pro tools. If you can shead any light on this I would be very greatful
Bump

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please?

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!

You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
Make sure show edit overlays is turned on in the Canvas view popup.

I have been creating a film on Final Cut Express and half of my film has disappeared- what can I do to retrieve it back!?

I have been creating a film on Final Cut Express and half of my film has disappeared! What can I do to retrieve it?! Furthermore, command Z doesn't appear to be working! Any help would be much appreciated!

Check the capture/scratch disc to make sure the media is still there. If it isn't your hard drive may be going bad. If it is, then you may have inadvertently cut part of the video from the Timeline or deleted it from the Browser.
As for the Command z issue, see how many levels of undo you have set in FCE preferences. Also keep in mind that Command z will not work if you close the project and reopen it.
-DH

I tried downloading Final Cut ProX but my computer said that "this computer cant download Final Cut ProX" and i dont know why?

i tried downloading Final Cut ProX but my computer said that "this computer cant download Final Cut ProX" and i dont know why?

Is your iMac still really on OS X 10.2 Jaguar?
Could you supply more accurate info about your Mac.
What Mac do you have?
To find out info about your system,
Click on the Apple symbol in the upper left of the OS X main menu bar. A drop down menu appears.
Click About this Mac. A smaller popup window appears. This gives you basic info like what version of OS X your iMac is running, the speed of your iMac's CPU and how much RAM is installed.
Click on the button that says More Info.
A larger window appears giving you a complete overview of your iMac's hardware specs.
Highlight all of this info and copy/paste all of this into another reply to this post, editing out your iMac's serial number before actually posting the reply.
This will tell us everything about your iMac so we may begin to help with your iMac issues.
Final Cut Pro X System Requirements.
OS X v10.9.2 or later
4GB of RAM (8GB recommended for 4K)
OpenCL-capable graphics cardor Intel HD Graphics 3000 or later
256MB of VRAM (1GB recommended for 4K)
3.5GB of disk space

Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?

Hello:
Just today, I was working on a Mac system that does not have any of the applications that I would have expected to need to have installed in order to do more than just decompress movie files compressed with Apple ProRes 422.
I was expecting to have to install Final Cut Studio 3, Final Cut Pro X, Compressor 4, and/or QuickTime 7 with the QuickTime Pro key; however, none of those applications are installed and I am able to create custom QuickTime Apple Pro Res422 Sequences in Premiere Pro as well as export using Apple ProRes 422. After Effects and Adobe Media Encoder also show all the Apple ProRes variations.
Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422? Is it something happening on the OS or QuickTime level that would affect CC or CS6 in the same way?
I've done a web search, but haven't really come up with anything other than older articles about needing to have FCP installed (and I typically work on systems with Final Cut Studio 3 installed as well as CS6, CC, or CC 2014). If more detailed information is available, it would be great to be able to read up on it.
The system is a 21.5-inch iMac running Mac OS X 10.8.5, QuickTime Player 10.2, and Adobe Premiere Pro CC 2014 (8.0.0 - I know an update is available for PrPro, but it's not my system to make that change).
Thanks in advance,
Warren Heaton

Hi Emil:
I use ProRes all the time as well, but I have Final Cut Studio on my workstations.
I had not come across MindPower009's YouTube video. That explains how ProRes could be showing up without FCP or Compressor.
So, the answer to my question would be, "No, CC 2014 does not eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422; however, if you are willing to be in violation Apple's terms of use, you can install the ProRes codecs anyway."
Even though MindPower009's YouTube video comments claim "FREE and LEGAL", it's clear from both the Apple download page and the ProRes codecs installer that Apple expects you to own at least one of their applications.
Thanks again for the link!
-Warren

Final cut pro and compressor

I have a FCP project that I have been working on for a year and have made DVD's from through compressor. Suddenly when I open compressor it states that there are no files associated with this project.
Another user suggested I trash the preferences, but am loath to do this incase it makes things worse as I'm not very clued up on some of the systems functions.
Please help
CB

If you've been on the project for more than a year, it must be legacy Final Cut Pro and not FCP X.
This is the FCP X forum - you should ask this question in the Final Cut Studio forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io
Andy

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one to no avail.

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one. I found Final Cut now loads but each of the backups and files in the previous 3 versions won't load. I've worked on the project for 3 weeks. Im suprised the backup files won't load either!?! I've only rendered 1 low res version. I am thinking I will have to rebuild the project in Final Cut 7. That is simply too risky to have all my back ups not load up!!

I'm a little confused by this?
Final cut now opens if launch older projects. But if I actually click on the project it crashes. Im not sure what you mean by events? I've moved them from the events folder.
but when I open up and of the projects the FInal Cut opens but then wont load the project even with no events in the FInal Cut Events folder.

Final Cut loading and running extremely slow...

Hi, I posted about this a few days ago but in my usual panic (work to do!) I didn't make it clear, basically, here's the problem...
I recently had problems with FCP and generally all apps on my machine, when they loaded there was a slight pause when the icon bounced on the dock and I came across all sorts of errors, especially in FCP.
So, I backed up the two internal hard disks, formatted them both, then Raided them as one and put all the information back from the backup.
Since then everything's been working fine, I installed a new fresh copy of Final Cut Studio and I've done a few jobs.
Since finishing my last job last week (which happened to be working with MP4 files, I'm not sure if this is relevant), every time I load FCP now the icon struggles to bounce and it runs extremely slow, even if it's loading a new, blank project. From my last post, someone suggested I delete the render files from the MP4 project, I did so but still no luck.
I've run Disk Utility, Disk Warrior, no hope.
All other apps are fine but when I run FCP it slows the whole machine down, takes forever to force quit and restart until it's back to normal.
Next step is to re-install Final Cut Studio but even if this works, I'd like to have an idea why this has happened??? I've never had problems like this with my mac before.
Thanks, hope this is clear and not too much!
Alex

I recently had problems with FCP and generally all apps on my machine, when they loaded there was
a slight pause when the icon bounced on the dock and I came across all sorts of errors, especially in
FCP. So, I backed up the two internal hard disks, formatted them both, then Raided them as one and
put all the information back from the backup.
It would have been much better to find the problem than to just move it around.
All you have done is create a RAID where none was needed. When you moved your clone back to the RAId, you only moved all of the original problems to a new drive.
You are probably looking at a complete scorched earth-style reformat and reinstallation of everything from scratch since you've done so much damage.
There were a couple of things to try before you made the RAID but they would have been found by asking some questions and searching in the Mac OS10 forums.
bogiesan

Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized, 0 access denied, 1 unknown. How do I solve this problem? The video is on my desktop it's an mpg.

Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized. 0 access denied, 1 unknown. How do I solve this problem? The video is on my desktop and it's an mpg file. Please help me

Get a copy of MPEG Streamclip and convert your MPG file to QuickTime/Apple Intermediate Codec (AIC). In FCE, select one of the setups that uses AIC that best matches your clip (say, 1920x1080i60). Create a new sequence, then import the converted file.
Note that if your MPG file is actually MPEG2 you will also need the QuickTime MPEG2 Component in addition to MPEG Streamclip.
What was the source of the MPG file? How about if you open it in QuickTime, then do Window > Show Movie Inspector. Tell us what it says for codec/compression, frame size & frame rate.

When you "Send Movie to Final Cut Pro" and you cancel Rendering and how

I am moving from iMovie to Final Cut Pro and have multiple movies to send to Final Cut Pro. I would like to cancel the rendering in FCP until I actuall need it.

Uncheck Background Render:
Al

Final Cut Pro4.5 and Leopard

Similar Messages

Maybe you are looking for