Final Cut Server and Filters in the browser window

Hi
we have an issue with a client where they have put some filters in their browser and this is causing problems uploading them to FCSvr.
This doesn't happen to every final cut pro project even though they all have filters in the browser
Has anyone else had any issues with this and are there any ways to make sure all CP projects upload correctly?
thank you

What specific problems are you encountering?

Similar Messages

  • Final Cut Server and Compressor / Qmaster serial conflict

    On my Final Cut Server machine, i have Final Cut Server version 1.1.1. On my Mac Pro i have Final Cut Studio 7. I have installed Compressor and Qmaster on my Final Cut Server from the Final Cut Pro DVD, so i can use Qmaster (the version of Qmaster must match exactly on all machines). But the two serials conflict, Final Cut Server will not start due to the following problem:
    "Either the current serial number is not valid or there is another server using the same serial number.
    Check the serial number and then stop and start the server using the Final Cut Server Preferences panel."
    Of course both serials is completely legit. Is it really true that i either need to downgrade Compressor and Qmaster (FCS will work, but Qmaster will not) or buy FCS 1.5? I have paid lots of money for this setup already, it can't be true that i am forced to update to 1.5.
    Please Apple, a solution?

    I have a similar case. Maybe someone knows how to solve it:
    We installed Final Cut Server and on the same MacPro we installed Final Cut Studio.
    After a while we dedicated this machine to Final Cut server and used the Final Cut Studio license on another nachine.
    Now, if I want to change or add a transcode setting in the compressor, I'm getting the error message: 'conflicting serialnumber' or something like it.
    So compressor thinks it's still part of th FinalCutStudio installation. But I don't quite understand, because Final Cut Server has its own compressor, isn't it?
    How can I solve this without loosing the custom transcode settings I've made in compressor.

  • Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one to no avail.

    Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one. I found Final Cut now loads but each of the backups and files in the previous 3 versions won't load. I've worked on the project for 3 weeks. Im suprised the backup files won't load either!?! I've only rendered 1 low res version. I am thinking I will have to rebuild the project in Final Cut 7. That is simply too risky to have all my back ups not load up!!

    I'm a little confused by this?
    Final cut now opens if launch older projects. But if I actually click on the project it crashes. Im not sure what you mean by events? I've moved them from the events folder.
    but when I open up and of the projects the FInal Cut opens but then wont load the project even with no events in the FInal Cut Events folder.

  • When I have the downloads window open and I close the browser window, how can I get the browser to open the homepage the next time I start it while the download window is still open?

    When I have the downloads window open and I close the browser window, the next time I reopen the browser while the downloads are still going, it returns me to the last page I was on. All previous versions of Firefox would return me to my homepage which I would prefer. Please let me know if this is possible.

    When you re-open Firefox and choose Restore Session, by default it picks up your most-recently-open window, and the other windows should then show up in Recently Closed Windows.
    The Firefox add-on Session Manager lets you manage how many closed windows and closed tabs are saved, in case it's not enough.

  • My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID.  I have tried to copy and paste in the browser window, but that doesn't work either.

    My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID.  I have tried to copy and paste in the browser window, but that doesn't work either.

    Have you tried accessing the email from another computer, device, email client or web browser?

  • Final Cut Server and iPad !!!???

    Is there a new to use FCS Client on an iPad !???

    Actually - there is. We here at factorial are just finishing developing one.
    It is called ClipTouch and it is a native iPad application that connects to an unmodified Final Cut Server (requires the latest version). It is designed as a review and approval tool for video clips. It allows searching of assets, viewing of proxies (supporting real timecode), changing of standard metadata (including status), browsing and adding timecode annotations, and archive and restore.
    We are currently in beta testing and are still looking for some testers.
    If you are interested, please get in touch with us via: [email protected]
    Please also include a brief description about where this application would be used/tested by you and what your interest in it is.
    Thanks!

  • Final Cut Server and FileMaker Pro

    Has anyone tried to import FileMaker Pro data into Final Cut Server? I have an FMP database with photos, video and audio files that I'd like to export to Final Cut Server along with the meta data and I'd be interested to hear if anyone has any experience with this.

    It needs to be filled with RAM, and when running Pro Apps, in the faster graphics processor mode. Mail, etc. will likely run fine along side them. I'd not play games when rendering though.
    When they don't run, they don't affect anything but disk space 60 gigs for it all including Templates... RAM is the key to running multiple apps on any given Mac.
    Nice Mac too. I just saw one the other day for the first time. I love that new trackpad the most. It's likely a lot faster than my 2.3 laptop, and I can run all the apps at the same time no problem with it. But ya need to fill up the RAM. I like that it's so green.
    Jerry

  • Final Cut Server and Mountain Lion

    Ok, so I have been trying to get Final Cut Server to work on Mountain Lion Server, and I have been so far following the path that has been set forth here...
    http://krypted.com/mac-os-x/installing-final-cut-server-on-lion-mountain-lion-se rver/
    I have gotten through all of the steps except for the last one, which is concerning the "0000_any_80_.conf" file. My problem is, that this file doesn't exist at all on my system. In my /etc/apache2 folder there is no /etc/apache2/sites folder. I don't know what the junk is up with that. Neither the folder or the .conf file exist. I don't know if I'm just stupid or what. Don't know much about setting up apache. But in my Server app, "Websites" is up and running. Final Cut Server is even up and running in the System Preferences. I just have no way to download the client app. Has anyone else had this problem?

    And the file
    /etc/apache2/httpd.conf
    In mountain Lion is
    /Library/Server/Web/Config/apache2/httpd_server_app.conf

  • Final Cut Server and Laptops

    We are about to deploy FCS but have a number of editors that work off of their laptops.
    I know my editors can look at FCS, but how do they retrieve the information that is stored on the SAN? Are they connected into the SAN through some sort of afp or something?

    The clients are connected with the Final Cut Server service, running on a machine which can look at both local/network storages and the SAN. That means, by checking out/caching files, the server application (the user interface you can see) provides you with the files - transfered via the connection you have choosen for your laptop (LAN, WLAN etc.)
    To sum it up, it's like that.
    SAN Storage -> Mac with Final Cut Server service running <- Client, connected via LAN/WLAN (AFP, SMB whatever...)

  • Final Cut Server and FCE

    Just wondering if Final Cut Server works with Final Cut Express and if it does are there any issues?

    This is something I would also like to know before integrate server with out network.
    Thank you!

  • Final Cut Server and Panasonic P2 MXF

    It is odd that in today's announcement, tech specs and PDF, there is no mention of MXF, P2 or Panasonic cameras. The specs do say it will read XML, but that doesn't mean it will read, display and play the P2 MXF files without import-and-conversion to QuickTime movies first. You would think the Final Cut team would be specific about this.

    As far as I know there is really no MXF integration right now. Should be working in some way with the really new MXF for QuickTime component (MXF4QT), but I have not yet tested it. Björn Adamski just wrote an article about the new plug in, you can find it in the FKT magazine (German, no online version available). It allows to open and play MXF files natively just like any other QuickTime clip. It works system wide, also in CoverFlow.
    Developers website: www.hamburgproaudio.de (right now no really infos, only for the windows tools.) or www.mxf4mac.com
    I am wondering how it works in real life with FCS.
    Marc

  • Red Footage and Final Cut Server

    Aloha gang-
    I am still testing FCS in our studio and enjoy many of the features in this product. I love being able to search for footage and pull it into my FCP project with no waiting (using edit-in-place). But I am looking for some advice and knowledge regarding Red Footage.
    My scenerio is this:
    We render all our red footage to offline files that we will use in the post production process. I want to tag all those files with appropriate metadata so our edit team can search and retrieve files as they need it. But with red there are 7 files (in our workflow) that correspond to the same thing. Basically there is the original R3D file which can not be used in FCP, there are the 4 quicktime proxies that the camera generates and live in the same folder as the R3D, and these are the files I want to get back to after the production is through and archived. There is the offline quicktime we generate to edit with which we need to tag. There is a log and transfer quicktime we can log and transfer all this data to FCS (but it doubles the data size so I am not looking to use this one and edit performance is okay at best), and finally there is the folder that the 4 proxies and original red file live in.
    All of these files should be search able by the same metadata. Imagine the shot is of a blue bird. When I type blue bird I would want all of these files to show up (obviously I could limit my search so I only get the version I need for what I am doing i.e. offline, proxie, etc. I have made metadata lookups for this so this is not the challenge.)
    The challenge is I only want to log 1 of these files and have the metadata applied to all of them. They all have almost identical names. The offline, R3D, and folder file have the exact same name. The proxies are identical but with _F, _H, _M, and _P behind them. For the catalog process I only want to transcode proxies for the _M (The _F, _H take way too long and the proxies look the same as _M and the _P is too small
    I could make them a bundle but that does not help too much as the offline lives in a different place as the footage.
    Any ideas would be greatful. My easiest solution is to tag the files twice, once for the production and once for the archive, but this seems like a waste of time that I could have a computer do instead
    P.S. anyone successful in getting the metadata out of the red file, I see the red metadata set, and have it in place, but can not get it to show anything no matter which file I upload.
    Any ideas, or help would be great
    mahalo
    scott

    Thank you for your replies. I guess my question is not really answered because of the conundrum associated with red footage
    But my workflow to get through this will be as follows: (In case anyone is interested)
    Set a scan to bring in the offline quicktimes as they are rendered and have someone tag them with meaningful tags to help us search during the production. I will send those to archive when we are done.
    After the project is completed and the files are removed from Final Cut Server I will set a scan to import all the _M files (they transcode faster and quality is not an issue since it is making proxies) and tag them as best I can for the long haul (archive) I can either leave the media on the drive or back it up, depending on the immediate use of the files. This works very well if the media is still there as I can just drag the _M into Clipfinder and render the shot I need as I need it.
    I am storing these clips in folders labeled CC_LTOXXX (where XXX is the number for the LTO tape which increases by one for each tape I use. When I import them into Final Cut Server from the LTO folder I have a direct line to which LTO tape the file lives on. It's not easy to get the files back (so with files used frequently I will also keep a copy on an external drive I can just plug in) from an LTO, but it is doable.
    If anyone has an easy way to pull a list of files from an LTO tape that would be great, and even better if it could be a list Final Cut Server made, or if Final Cut Server could just pull the files. My LTO is a network drive so I would have to access it through an IP address, but if I could do that I would be golden.
    Anyway I know this will all evolve and this is just where I am right now, any ideas would be appreciated.
    Mahalo
    scott

  • Final Cut Server - XDCAM metadata not appaering in the asset

    Hi Apple community,
    I would like to seek some guidance and help from you guys.
    For Final Cut Server, I wonder why the XDCAM files was unable to show it's metadata for Codec Information as shown below:
    Unlike Prores422, It shows perfectlfy fine:
    Please advice,
    Thanks a lot.
    More Power.
    Monching16

    Hi Apple community,
    I would like to seek some guidance and help from you guys.
    For Final Cut Server, I wonder why the XDCAM files was unable to show it's metadata for Codec Information as shown below:
    Unlike Prores422, It shows perfectlfy fine:
    Please advice,
    Thanks a lot.
    More Power.
    Monching16

  • Final Cut Server (FCSvr) missing the Edit Proxies Device in the Advanced Administration Pane.

    Final Cut Server (FCSvr) missing the Edit Proxies Device in the Advanced Administration Pane.
    If for any reason an Admin has mistakenly or purposely deleted the Edit Proxies device
    from the FCSvr Java Admin, and you'd like to restore connective to it following the instructions below.
    Note verify these symptoms, open the FCSvr Java Admin, Go to Preferences and the Proxies Pane and inspect
    If the field and drop down for Edit Proxies is missing please backup your FCSvr DB manually and following the steps below to restore connectivity.
    1. From the Terminal from the following command
              cd /Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/MacOS/
    2. Next run the following command
               ./fcsvr_client getmd --xml /prefs/0 > ~/Desktop/prefs0.xml
    This will output a XML file containing the Final Cut Server Global Preferences to the Desktop folder of the currently logged in user.
    3. Using for favorite XML Text Editor (mine is TextMate) open the file that was output
    4. Notice the XML element and attribute values between lines 29 and 31
      <value id="PROXY_CLIP_EDIT_DEVICE">
       <address>/dev/3</address>
      </value>
    5. From the command line run the following command to determine the Device ID for you Edit Proxies device
    ./fcsvr_client search /dev
    You should get an output similar to what's below.
    Address        DEVICE_NAME                   DEVICE_TYPE                  
    /dev/20        Edit Proxies                  contentbase                  
    /dev/9         MEDIA                         filesystem                        
    /dev/1         Proxies                       contentbase                  
    /dev/2         Version                       contentbase 
    Record the new Device id for the Edit Proxies device.
    6. Open up the file /Desktop/prefs0.xml and XML attribute in line 29
       <address>/dev/20</address>
    to the value of the Edit Proxies from step 6.
    7. Save the /Desktop/prefs0.xml
    8. From the command line run the following command
    sudo ./fcsvr_client setmd /prefs/0 --xml  ~/Desktop/prefs0.xml
    enter you admin password if prompted.
    9. Close and reopen the FCSvr Java Admin, Go to Preferences and Proxies and inspect
    The field and dropdown should reappear.
    If for some reason this didn't work, feel free to contact me offline.
    Nicholas Stokes
    [email protected]

    H.264 is a puzzling choice of codec for edit proxies. H.264 is not an edit-friendly codec since it is a complex long-GOP structure and will require a ton of rendering just to play back the timeline. ProRES 422 Proxy would be a much better choice for editing. I'm afraid I can't account for the differences between Compressor and FCServer in this case, but my gut tells me the non-I-frame codec you are trying to use for edit proxies might have something to do with it. Maybe for an edit-proxy workflow to operate properly on the server-side the codec must be I-frame? Is there any reason you do not want to use ProRES 422 Proxy? They are about 1/3 the footprint of 720p24 DVCPRO-HD, which is already very efficient. For that frame rate and frame size they would be roughly half the heft of good ol' DV25.
    So my answer to all three questions would be to try ProRES 422 Proxy for your edit proxies and see if everything lines up.

  • I can't fix the issue on Final Cut Server,

    I tried to fix this issue, I don't have this program anymore, but it is continued appearing the error on my laptop.
    "Final Cut Server cannot start without a valid serial number. Please enter your serial number in the server's Final Cut Server System Preferences panel."
    For your information, I deleted this program few years ago, It is really annoying me, "Popup" Check the picture ( Below)
    I would appreciate, if you resolve my problem thanks!

    Did you try using the tool from Digital Rebellion?
    http://www.digitalrebellion.com/fcsremover/
    It is supposed to removed Final Cut Server and Final Cut Studio.

Maybe you are looking for

  • [IntegratedWLS with JDev11g]: ADauthenticator required SSL/TSL exception ?

    hi i already have AD authentication provider and it was work fine before and list users and group today when i try show users and group from console i get this exception error and cannot connect to list get users i dont change any configuration or at

  • Crashes in photoshop and nik

    I'm crashing when I try to open a NIK tool or using a brush tool in photoshop. Help?

  • Photos does not handle AVI movies

    iPhoto permitted the import of AVI movies from a "deer cam" SDcard. Plug the chip in and iPhoto asked to import all items on the SDcard, just like photos. Double click on an AVI movie and I could watch the 30 sec clips with no problem. I do have the

  • FTP set-up to new PC

    I am to get a new PC and I wonder if I could migrate all the FTP set-ups that I have on old PC with Dreamweaver MX 2002 (I have about 20 FTP set-ups). My help desk support said that they are to reinstall DW using CDs meaning that I would have to re-s

  • BP-account Creation Date ?

    Hi, Could someone please tell me where can I find the field which will tell me when a BP-account has been created ie date ?