Final Cut Studio 2 and iMac with iGMA 950 Graphics

is it possible install final cut studio 2 on iMacs with GMA 950 Graphics card?
thx

Comments on the matter here:
http://forum.insanelymac.com/lofiversion/index.php/t41959.html

Similar Messages

  • Final cut studio and leopard

    i need to know if final cut 5 (final cut studio) will run with leopard os x

    While I think that Leopard is a fine new OS, and I love it, I CANNOT RECOMMEND that you install it on a Production machine. There are just too many reports of issues, and really, Leopard adds nothing to the Final Cut Suite. New versions of the OS are notorious for not working with everything...and currently it DOES NOT work with many Adobe products. There are also many third party devices that may need to be checked into, like ATTO cards, eSATA cards, Firewire cards, capture cards....many many things.
    If you have a good working machine, stick with Tiger. The new OS is nice and slick, but has YET to get a clean bill of health for any version of Final Cut Studio.
    Shane

  • Is there a difference between final cut studio and final cut studio upgrade

    i wish to buy final cut studio and was going to buy from the apple store but they recently stopped selling i have found on amazon two final cut studios one call final cut studio and the other called final cut studio upgrade the upgrade one is cheaper so this makes me think is this just like an expansion and do i need the original but both have the same pictures, descriptions and specs so are they the same thing just with different names or what? please help

    Final Cut Studio is the full install...where the UPGRADE means that it requires you to have a previous version.  It is cheaper because it only works if you have a previous version.

  • Final Cut Studio 7 compatible with OSX 10.9.5

    Is Final Cut Studio 7 compatible with OS X 10.9.5. when starting install dvd it says that can't open package

    Here is your answer for FCP7
    http://provideocoalition.com/ssimmons/story/installing-and-editing-with-final-cu t-pro-7-on-a-new-macbook-pro-with-yosem
    Lycka till !
    Mvh
    Hans

  • Final Cut Studio install - Trouble with DVDSP 4 Preferences & Burn / menus

    Hi there. I recently upgraded my dual G5 to Tiger and upgraded my FCP 4.5 & DVDSP 2 by installing a full version of Final Cut Studio.
    Final Cut is working fine. DVDSP is not. It opens fine, however when I choose to open the Preferences to setup format (PAL) and encoding prefs, etc - I do not get a dialogue box. If I try the shortcut, I see the menu bar light, but again no dialogue box.
    I tired to build a new project with compressor encoded mpeg2 & aiff streams and found that Burn / Build & Format are greyed out in the menu. I know that the file types are fine as I have used them before without any issues. I checked to see that the correct serial number is for FC Studio and it is. I have also ran all of the updates.
    I also find that Compressor is often a little buggy. Sometimes works fine, other times crashes.
    Anyone have any ideas?
    I really do not want to reformat by reinstalling Tiger fresh. I am thinking about trying to delete all of Final Cut Studio and the older FCP & DVDSP apps on my machine.
    I would really appriciate some advice beofre I get myself into any mess!
    Thanks for reading!!

    Hello. Many thanks to everyone that tried to help me.
    My problem has now been solved by the same post in the DVDSP forum. Here is the post that solved all of my problems.
    http://www.apple.com/support/downloads proapplicationsupport31macosx104.html
    Even though the software update appeared as if I was completely up to date, the ProAppRuntime.dmg solved all of my issues. Thanks David S.!!!
    ==========================================
    David S.
    Posts: 2,565
    From: Inland Northwest
    Registered: Aug 26, 2004
    Re: DVDSP 4 install from F Cut Studio / Preferences not opening / HELP
    Posted: Mar 3, 2006 12:48 PM in response to: Spacegirlmelc
    Reply Email
    http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html
    G5 2.5G 4.0 RAM Mac OS X (10.4.3) Radeon ATI X800 Video Card 256 MBs RAM
    =============================================
    From: The Netherlands
    Registered: Mar 3, 2006
    Re: DVDSP 4 install from F Cut Studio / Preferences not opening / HELP
    Posted: Mar 6, 2006 1:19 AM in response to: David S.
    Reply Email
    I would like to say BIG THANK YOU to David S.!!! I DL'ed & installed the update you mentioned. After a restart, DVDSP 4 is now working fine. The update resolved my preference & burning & building issues. I am very HAPPY to have a reprive from a fresh install.
    Dual G5 Mac OS X (10.4.5)

  • Exporting scoring markers in Final Cut Studio and importing to Logic Pro

    I want to export my scoring markers with the movie in Final Cut Studio and see them as markers in Logic Pro 7.2.x. I need to use the markers as "hit points" to calculate my tempos and effectively lay out my score based upon the action in the picture. I'm exporting the Final Cut Studio project to a Quicktime movie and choosing audio and video + "scoring markers". Thanks for your help.
    TG

    Don't bother rendering a movie out of LiveType, simply save the project file and import it into FCP.
    LiveType outputs in the Animation codec only, so you will always have to render. Using the project file has another advantage -right clicking and choosing "Open in Editor" will drop you back into LiveType where you can quickly make adjustments, save and return to FCP with the changes in place.
    To set project properties, you can use the Place Background Movie function in LiveType. Drop a short clip in and it will automatically adjust the properties to match. You can delete it once you have the settings. If you have Anamorphic video, you will still need to adjust the pixel aspect ratio -exact settings depend on the format, you haven't told us that yet.
    Again, depending on the format, you might have to set the Anamorphic flag in FCP's Item Properties for the LiveType file.
    When you view the FCP export in QuickTime Player 7 (not QuickTime Player X) make sure that the High Quality Playback preference is selected.
    Typefaces in video:
    Avoid using small, thin, delicate and Serif typefaces. They never work well.
    A well known example of a Serif font is Times, which you should avoid at all costs in any case -it makes it look like you made the titles in MS Word. Stick with San Serifs with clear, bold strokes. Helvetica is a popular example of a San Serif.
    If your titles are white, reduce the brightness to around 90%. Apply a shadow or border to distinguish them from the background. While it might sound counter productive, applying a tiny amount of blur can help too.
    One more thing: Don't put your email address in the body of your post. The forums are open to anyone who wants to read them and by extension, web bots. They will harvest the address and bombard it with spam. We don't do personal email on the forums anyway -we share information amongst all users.

  • Does Final Cut Studio 2 work with Lion?

    Does Final Cut Studio 2 work with Lion?

    As Final Cut Studio consists of several applications, either go to your System Profiler under Apple menu -> About This Mac -> More Info, and select Applications to determine which applications are PowerPC, or visit this website and check the version info of each application to see what works and what doesn't:
    http://roaringapps.com/apps:table

  • Final cut studio and space

    i see that final cut studio and all the content within takes up a lot of space...can the various templates and content from motion, live type etc be installed on a separate external drive? and if so the pros and cons?
    thanks

    Templates and libraries (such as for Motion, DVD Studio Pro, Soundtrack Pro, Livetype, etc.) can be installed to an external drive during the install process. We do that for laptop installations.
    It's best to always keep the applications in the Applications folder according to Pro support, but you can move the libraries anywhere you want or not install them at all.
    If you do move them manually you can go into each application's preferences and set the location for the moved content. It won't harm them at all.

  • Final cut studio and macbook pro

    hi i have final cut studio 2 currently installed on my imac, and it kinda slows my general use of the computer
    i bought a new macbook pro (the new one with aluminum casing), but its only the base, and i have not upgraded it in any way, so it is as it comes
    and basically i was wondering, if i installed the entire final cut studio 2 (and aperture), how would it affect the general speed of the machine when doing other general tasks not FCS related:
    a) while FCS is running
    and b) while it is not running
    i also want to run games off of my MBP so i really dont want to compromise speed

    It needs to be filled with RAM, and when running Pro Apps, in the faster graphics processor mode. Mail, etc. will likely run fine along side them. I'd not play games when rendering though.
    When they don't run, they don't affect anything but disk space 60 gigs for it all including Templates... RAM is the key to running multiple apps on any given Mac.
    Nice Mac too. I just saw one the other day for the first time. I love that new trackpad the most. It's likely a lot faster than my 2.3 laptop, and I can run all the apps at the same time no problem with it. But ya need to fill up the RAM. I like that it's so green.
    Jerry

  • Final Cut Studio and Final Cut Studio 2

    At work, we have a Mac Pro running Final Cut Studio (original) and recently acquired a G5 and would like to purchase Studio 2 for it. Are Studio 2 projects compatible in any way with Final Cut Studio? Are there any compatibility packs for this?

    FCP projects are not backwards compatible so a project created in FCP 6 will not work on FCP 5.
    The workaround is using [XML exports|http://developer.apple.com/appleapplications/fcpxml.html].
    G.

  • Trying to install final cut studio and not recognizing serial number

    I am upgrading from final cut pro 5.1.4 with final cut studio 2. When I enter the studio 2
    serial number it asks me for my original serial number from 5.1.4 and it tells me it's not
    a valid serial number. I have checked over and over with my manual and the serial number
    on the software in the computer and it still says the same thing.
    Please help me thank you.

    Well we are not together anymore but he was my boyfriend at that time. He was trying to do something really nice without realizing many things about purchasing something like this.
    Actually, I have 2 serial numbers one for DVD Studio Pro 3 academic and one for final cut pro HD Academic Su. Is that what I am looking for ?

  • How is final cut studio 7 working with lion

    I am still in snow leapard, 10.6.8 and useing Final Cut Studio 7 and Logic 9, i have been considering moving to  Lion and looking for some feed back on the compatability of FCP7 and Logic 9 with LION, for the past few months the word on the street has been mixed, it is now mid jan 2012 is there any clear info on the compatablity of these programs with lion?

    What are the benefits you perceive in moving from SL to Lion? Some people report FCS problems and others don't.
    If you do move, clone your systems drive…just in case.
    Good luck.
    Russ

  • Final cut studio and mavericks

    Is there a version of Final Cut Studio (I only need Finaul Cut Pto (and essential software to make it work) which will function with Mavericks?
    I am too old to change again how to do things and unfortunately I need some software which only works with the latest systems.
    Many of my plug in require vast ampunt of money to work with The new FinalCut, and frankly I don't like the video editing philosophy behind it. Is my opnion but it plays a role in my request,
    I hope someone will give me some hints. Else I need to switch from one Disk in my Mac Pro with Snow Leopard to the other with Mavericks ... and is a great waste of time.
    Thanks to everyone if there is a suggestion, and super thanks to the ones who will not suggest me why don't I learn the great new things, In that case the reply is here: I edited all my life with flatbed mechanical hardware: we had up to 7 screens to choose our takes from. I moved happily to digital, but editing is about giving tempo to the best take, and later to work on sound and effects. at 70 I learned already whatever I need to learn and I do not want to look at any manual anymore.
    Thanks

    There are copious amount of posts explainging this in depth in the discussion, its asked a number of times each day. So rather than add to the confusion, read the replies from the guys who are long time FCP 7 users and are running Mavericks and when you have a specific question, post back.

  • Final Cut Studio and Flash Macromedia 8

    Hello everybody,
    I would like to know if I can export swf files from Flash 8 (For MAC) to Final Cut Studio in order to convert them to Video files such as *.avi, *.mpg and to modify them. On Flash we can publish a flash file as quicktime file, but several effects included in Flash 8 are not available. We can to export it as AVI, but just from Windows, from Mac is not available, anybody knows why?
    For this reason, I have:
    1) to publish a flash file as SWF
    2) to convert the file from SWF to AVI (with a program like Magic SWF2AVI (from Windows))
    3) and it will be ready to work with it on Mac with Final Cut Studio.
    If anybody knows how can I simplify it? and how can I work with Final cut from a Flash file using just a MAC?
    Thanks a lot!
    G5 Mac OS X (10.3.9)
    G5   Mac OS X (10.3.9)  

    Yes. It is possible for you to create a *.avi if you have the source *.fla file. In Flash File menu > Export > Export Movie and in that you can choose avi, move, jpg sequence or anything like that. You need to ensure the *.fla file is created with right settings interms of Frames per second etc that is relevant to the settings you need it in FCP. Guess that is what you wanted !!!
    Power MAC G5 Quad   Mac OS X (10.4)   Decklink HD Extreme

  • Error installing Final Cut Studio and iLife on Leopard

    When I upgraded to Leopard, I decided to entirely wipe my boot drive since I was experiencing problems with certain applications (ie: Final Cut Pro) in Tiger. Therefore I've been re-installing all of my applications in Leopard. I've been having some problems though, when I try to install Final Cut Studio, I get this message after a while of it trying to install the Apple Soundtrack Pro loops disc:
    http://salsunproductions.com/misc/fcsinstallproblem.jpg
    I also get a similar error when trying to install iLife 06.
    The strange thing is that I am able to run the Applications fine with the exception that all my Final Cut Studio applications don't remember their serial number and my name/organization. I get this message every time I boot up a Final Cut Studio Application (this is the original Final Cut Studio, PPC)
    http://salsunproductions.com/misc/fcssnbootup.jpg
    Message was edited by: salilsundresh

    As for the registration problem:
    http://discussions.apple.com/thread.jspa?messageID=4582284&#4582284
    As for the disc install, if you're sure you're disc isn't just scratched, then I guess there's nothing to do but wait for 10.5.1 and see what happens.

Maybe you are looking for

  • Pages 5: Spacing between bullets (not line spacing)

    How can I control the spacing between bullets? 1. I clearly see how to control the spacing around a bullet relevant to its text. That's not what I'm referring to. 2. I clearly see how to set line spacing. That's not what I'm referring to. What I'd li

  • How to retain hyperlinks converting word 2011 to .pdf and Adobe PDF

    I'm having this issue with saving a MS Word 2011 doc.  Hyperlinks are NOT preserved.  Seems unrelated to any browser version.  I'm on OSX 10.7.4.  Have tried the 'built-in' "Save as PDF" option under the PRINT GUI, also tried the "Save as Adobe PDF",

  • My rumor thread.

    If you want a Verizon Trophy, the best way to get one (maybe the only way)  is to drive around New Jersey behind delivery trucks. Both the ebayclassified and craigslist Trophys seem to have fallen off trucks in Jersey http://centralnj.ebayclassifieds

  • Photoshop does not want to print in color anymore

    Since last Friday Photoshop does not want to print in color anymore. I am working with a Mac OS X 10.7 and a Canon Pixma printer. When printing from the web the printer prints in color, but when I try to print a picture from Photoshop CC the picture

  • Real-time feedback system

    My experimental setup (labview is being used to drive it) is as follows: 1. Give the physical system a random move -> 2. Acquire data using PXI-5124 digitizer -> 3. Perform some calculation on the data acquired -> 4. Accept/ reject the move based on