Final Cut Studio 2 and Macbook (not Pro)

Curious to know if anyone has any experience running Final Cut Studio 2 on a non-pro Macbook. Can Macbook handle Final Cut Pro alright? Is video memory an issue?
Thanks,
Mbs

For the record, Motion will run on a MacBook. It's just that some of the features aren't supported, and will produce incorrect results. So I wouldn't rely on it.
Final Cut, however, works perfectly. No problems at all.

Similar Messages

Final cut studio and macbook pro

hi i have final cut studio 2 currently installed on my imac, and it kinda slows my general use of the computer
i bought a new macbook pro (the new one with aluminum casing), but its only the base, and i have not upgraded it in any way, so it is as it comes
and basically i was wondering, if i installed the entire final cut studio 2 (and aperture), how would it affect the general speed of the machine when doing other general tasks not FCS related:
a) while FCS is running
and b) while it is not running
i also want to run games off of my MBP so i really dont want to compromise speed

It needs to be filled with RAM, and when running Pro Apps, in the faster graphics processor mode. Mail, etc. will likely run fine along side them. I'd not play games when rendering though.
When they don't run, they don't affect anything but disk space 60 gigs for it all including Templates... RAM is the key to running multiple apps on any given Mac.
Nice Mac too. I just saw one the other day for the first time. I love that new trackpad the most. It's likely a lot faster than my 2.3 laptop, and I can run all the apps at the same time no problem with it. But ya need to fill up the RAM. I like that it's so green.
Jerry

Final cut studio and Mac Book Pro ?

A simple question .... how does the complete suite FCS Universal works in a MAC BOOK PRO ?
if necessary the configuration will rise to the top (17", 3GB ram etc......)
Thanx L.

ps: Sorry for my rusty english!
Wait til you hear my Italian. Wait...I don't speak Italian. Wait til you hear my Spanish...2 years of high school and 3 of college and the best I can do is ask for another beer, and ask where the bathroom is.
At least they are two useful phrases.
Your English is fine.
Shane

Exporting scoring markers in Final Cut Studio and importing to Logic Pro

I want to export my scoring markers with the movie in Final Cut Studio and see them as markers in Logic Pro 7.2.x. I need to use the markers as "hit points" to calculate my tempos and effectively lay out my score based upon the action in the picture. I'm exporting the Final Cut Studio project to a Quicktime movie and choosing audio and video + "scoring markers". Thanks for your help.
TG

Don't bother rendering a movie out of LiveType, simply save the project file and import it into FCP.
LiveType outputs in the Animation codec only, so you will always have to render. Using the project file has another advantage -right clicking and choosing "Open in Editor" will drop you back into LiveType where you can quickly make adjustments, save and return to FCP with the changes in place.
To set project properties, you can use the Place Background Movie function in LiveType. Drop a short clip in and it will automatically adjust the properties to match. You can delete it once you have the settings. If you have Anamorphic video, you will still need to adjust the pixel aspect ratio -exact settings depend on the format, you haven't told us that yet.
Again, depending on the format, you might have to set the Anamorphic flag in FCP's Item Properties for the LiveType file.
When you view the FCP export in QuickTime Player 7 (not QuickTime Player X) make sure that the High Quality Playback preference is selected.
Typefaces in video:
Avoid using small, thin, delicate and Serif typefaces. They never work well.
A well known example of a Serif font is Times, which you should avoid at all costs in any case -it makes it look like you made the titles in MS Word. Stick with San Serifs with clear, bold strokes. Helvetica is a popular example of a San Serif.
If your titles are white, reduce the brightness to around 90%. Apply a shadow or border to distinguish them from the background. While it might sound counter productive, applying a tiny amount of blur can help too.
One more thing: Don't put your email address in the body of your post. The forums are open to anyone who wants to read them and by extension, web bots. They will harvest the address and bombard it with spam. We don't do personal email on the forums anyway -we share information amongst all users.

Final Cut Studio Vs Adobe Premiere Pro CS5.

What are the best reasons for purchasing Final Cut Studio over Adobe Premiere Pro CS5?
Thanks!

Hi friends i'ven reading your coments and my conclusions are CS5 is faster and has the same features and quality than FCP, i like to ask to Studio X if you know more FCP and you are a pro why? with facts because if i have to buy or say to a friend or client go and use one or another with real facts.
Example FCP has better color calibration, better final quality, more features or so.
Another curious thing is that jhon 1 in 2 said is better AVCHD compatibility or handle these are to consistent points that i can undertand as a normal person.
I can understand a point if you can say me why FCP is better with examples because i know much of hardware but a little of this software, i can give a big point to a software tha can use mi machine at full capacity because if i spend 10K$ in a computer i'd like a blazing fast one, if not is better to spend only 2.5K$ and wait the same amount of time for the same results.
Sorry for my english i'm not from USA so my vocabulary is short.

Final cut studio and space

i see that final cut studio and all the content within takes up a lot of space...can the various templates and content from motion, live type etc be installed on a separate external drive? and if so the pros and cons?
thanks

Templates and libraries (such as for Motion, DVD Studio Pro, Soundtrack Pro, Livetype, etc.) can be installed to an external drive during the install process. We do that for laptop installations.
It's best to always keep the applications in the Applications folder according to Pro support, but you can move the libraries anywhere you want or not install them at all.
If you do move them manually you can go into each application's preferences and set the location for the moved content. It won't harm them at all.

Is there a difference between final cut studio and final cut studio upgrade

i wish to buy final cut studio and was going to buy from the apple store but they recently stopped selling i have found on amazon two final cut studios one call final cut studio and the other called final cut studio upgrade the upgrade one is cheaper so this makes me think is this just like an expansion and do i need the original but both have the same pictures, descriptions and specs so are they the same thing just with different names or what? please help

Final Cut Studio is the full install...where the UPGRADE means that it requires you to have a previous version. It is cheaper because it only works if you have a previous version.

Final CUt Studio 2 will not run on my Mac Pro & Macbook Pros simultaneously

I was under the impression that the licensing contract for FCPS2 allowed for the software to be installed and run on a desktop and a portable machine simultaneously. Am I wrong? I purchased Final Cut Studio 2 legally, and have installed it on my Mac Pro and my Macbook Pro, but if I try to open one of the FCS apps while one is running on the other computer, I get a protection error message and have to shut down the app. Does anyone know a workaround to this other than shutting off airport on one of the machines?

I was under the impression that the licensing contract for FCPS2 allowed for the software to be installed and run on a desktop and a portable machine simultaneously. Am I wrong?
Yes, you are wrong.
The license allows for the installation of a copy on each machine but they can not run simultaneously. The intention is to allow users to work with a laptp while away from the main editing machine. If you need the capability running two copies at the same time, buy another copy.
Good luck,
x

Final Cut Studio on MacBook Pro

Will all Final Cut Studio 2 programs and features run efficiently on a new MacBook Pro 13"? If not, what MacBook Pro would be the cheapest to run it on?

Greetings,
I just upgraded to a new 3.06 GHz 17 inch MacBookPro with 4 GB of RAM from the previous generation 17 inch MacBookPro with a 2.33 GHz processor. I have noticed a tremendous increase in performance and ability to render and export with ease and alacrity.
Having said that, my general question is: Does anyone have any general advice for hardware/ video setup configurations? I am very well versed with iMovie (ha!), and now I am seriously trying to graduate to Final Cut Studio. I have made a few clips and played around with various transitions, filters, etc, but does anyone have advice for what settings I should be using?
Oh yeah, I have a Sony AVCHD Camcorder (HDR-CX7)... I am not a fan of the CMOS chip, but nonetheless, it is what I have at the moment.
Any feedback will be appreciated.
Cheers.

Trying to install final cut studio and not recognizing serial number

I am upgrading from final cut pro 5.1.4 with final cut studio 2. When I enter the studio 2
serial number it asks me for my original serial number from 5.1.4 and it tells me it's not
a valid serial number. I have checked over and over with my manual and the serial number
on the software in the computer and it still says the same thing.
Please help me thank you.

Well we are not together anymore but he was my boyfriend at that time. He was trying to do something really nice without realizing many things about purchasing something like this.
Actually, I have 2 serial numbers one for DVD Studio Pro 3 academic and one for final cut pro HD Academic Su. Is that what I am looking for ?

Final Cut Studio on MacBook?

Hi,
I have been told that I cannot use Final Cut Studio or FC Pro on my MacBook (2008, the one before the aluminum one 2.4GHz, 2GB Memory, 160 HD) because it is not powerful enough and that only a MacBook Pro can handle the software. Surely this can't be true? If it is, what can I do to increase my Hard Drive for it to be powerful enough? Something external? And, is increasing the Hard Drive the only thing needed if I wanted to use this software?
Thanks

esiders wrote:
I wouldn't try to use Final Cut on the white MacBook. You may be able to get it to work, but it would probably be very slow.
Remember, though you have 2GBs of RAM, the MacBook never has 2GBs available. The white MacBooks only have a 2GB capacity (you can't upgrade the RAM)
You can try it, but it may be slow.
The references about RAM aren't entirely true.
The early MacBooks (Core Duo) have an official cap of 2GB of RAM.
The first Core 2 Duo MacBooks have an Apple-supported cap of 2GB, but can use 3GB.
The late 2007 MacBook & later have an Apple-supported cap of 4GB, but users have reported success with up to 6GB.
The OP's machine can easily support additional RAM. However, due to the requirements for FCP, upgrading the RAM won't help in getting that program working. The machine is physically incompatible (wrong type of graphics processor) and the only way to deal with that is to buy a different machine.
~Lyssa

Final Cut Studio and OS 10.5 problems

Since upgrading to Leopard on my G5, DVD Studio Pro, Soundtrack Pro and Motion have not been working properly. DVD Studio Pro opens but none of the program-specific pulldown menus appear at the top of the screen. DVD Studio Pro, File, Edit Project, Arrange, etc. pulldowns are simply missing. In addition, all other pulldown menus in the program (e.g., First Play, Background, Overlay File, etc. appear but do not function. Soundtrack Pro and Motion also have the missing menu bar items, but I haven't had time to see if other functions are also affected. Final Cut Pro appears to be working normally.
Fortunately (and a bit mysteriously), I have the same programs on my Macbook Pro and they seem to have been unaffected by the transition to 10.5. I had upgraded that system first and everything seemed to go pretty smoothly, so I decided to upgrade the G5 as well.
I've trashed preferences files to no effect and was hoping to find a solution short of reinstalling all of Final Cut Studio or, worse, the OS. Any suggestions or reports of a similar nature would be appreciated. Thanks.

ill just add what I am experiencing to see if anyone can help. I have no problem with drop down menus or DVD studio pro. I am using the FCP 4.5 however.
Here is my deal.
I've got issus with Leopard - perhaps with everyone else on here. Specifically. I am trying to make m2v of my FCP project. I first attempted to send it to compressor with the response from compressor being "no background processing able" This happened once before a long time ago and I have NO idea how to correct that. I installed complete new software on another drive and the same thing happened. Is FCP 4.5 not compatible with OSX10.5?
Also I tried going through quicktime conversion but I could not select mpeg2 compression. WHAT HAPPENED TO THAT when I installed 10.5 - any idea how to restore that?
If that wasn't bad enough. I went to titanuium toast 7.1.2 and tried burning a FCP DV file just to test. I get the message Mac OS error- cant burn!!!
HELP!!!!! How can I get compressor to work, or quicktime mpeg2 compression plugin back to confiugre through FCP, or just burn in toast?
Thanks!!!!!

How can Install Final Cut Studio in my Mac Pro Early 2009 ??

I have Final Cut Studio 7 NOT installed yet and Mac Pro Early 2009 with OSX 10.9.5. I have Final Cut Pro X Version 10.1.4 installed. Can I installed Final Cut Studio here together with FCPX ?? Maybe not. What is the best way to install FCP Studio??
Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ?? 10.6, 10.7, 10.8, 10.9 ??
Thanks for any help I can get
Alberto Marban

Here is the Best Practice Guidelines from Apple:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
MtD

Final Cut Studio and Final Cut Studio 2

At work, we have a Mac Pro running Final Cut Studio (original) and recently acquired a G5 and would like to purchase Studio 2 for it. Are Studio 2 projects compatible in any way with Final Cut Studio? Are there any compatibility packs for this?

FCP projects are not backwards compatible so a project created in FCP 6 will not work on FCP 5.
The workaround is using [XML exports|http://developer.apple.com/appleapplications/fcpxml.html].
G.

Installation of Final Cut Studio on new Mac Pro

Hello all,
I have just purchased a new Mac Pro, and am preparing to install Final Cut Studio upgrade. The wrinkle for me is that I have Final Cut Pro 3.02 installed on an old G4 Power Mac. I have two video projects on the old computer, also backed up on external drives, that I want to be able to edit on the new computer.
I am planning to install my old FCP software on my new Mac Pro, then install the FCS upgrade software. Is there anything I should know or do before doing this to make sure that I will not have any trouble either 1) installing Final Cut Studio upgrade, or 2) accessing my old FCP files.
Many thanks in advance for your wisdom and assistance.

I've successfully installed Final Cut Studio. Thanks, David, for the installation tip.
Now I am holding my breath that I will not have any trouble copying scratch files for my most important projects to my second hard drive, or opening these projects on my new computer.

Final Cut Studio 2 and Macbook (not Pro)

Similar Messages

Maybe you are looking for