Final Cut Studio 2- Color problem on Mavericks

Hello,
I've a little issue with Color from FCS 2 on Mavericks.
during playback or correction preview flashing- in FCP and others evyrything is OK, only in Color is that dysplay preview issue- any ideas?

Read further down the page:
Application-Specific Requirements
Motion
* The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
* ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
* ATI Mobility Radeon 9700 or 9600
* NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
* For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
Color
* The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
* ATI Mobility Radeon X1600
* ATI Radeon X1600
* NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
* A display with 1680-by-1050 resolution or higher
* A three-button mouse for full functionality
All the original poster has to do is buy a new graphics card, that's it.

Similar Messages

  • Will Final Cut Studio 3 work with OSX Mavericks?

    Hi,
    Does anyone know if Final Cut Studio 3 will work with the New OSX Mavericks when it's released this fall?
    Thanks in advance

    If you have the snow leopard install disk, you can do a custom install and just install rosetta. 
    One person on this forum, says there are serious issues with this workflow and links to another method.
    https://discussions.apple.com/message/22029476#22029476
    I've done it a few times without any issues, and I haven't seen any definitive reports detailing the problems with this. 
    Doing a complete clean install is the much safer way to have a dependable system.  Here's a user tip on OS and FCP installation
    https://discussions.apple.com/docs/DOC-2861
    I'd also recommend creating a bootable clone of your startup drive before doing any os upgrades or application installations or upgrades.  That way if things go south, you can easily return to the previous working system.
    https://discussions.apple.com/docs/DOC-2494

  • Final Cut Studio 3 installation problem

    Working on my Mac Pro 1,1 and I'm habing rouble re-installing Final Cut Studio 3 on it. 
    Here's the background:  I've hesiated updating the OS beyond 10.5 so that I could keep using a legacy copy of ProTools LE.  Recently, I decided to add a new hard drive to one of the open bays so that I could have a 10.7.5 startup disc for most applications, and I could simply rebppt in 10.5 when I need to.  everything went smootly until I tried to re-install FCS-3. 
    The installation keeps hanging up whenever I try to install any components that need content (i.e. DVD Studio Pro, Sound Track, etc...).  As a test, I did an install of just FCP (and default Compressor) and that seemed to be OK.  Once installed, I thought I'd try to add one compnent at a time - so I started with DVD Studio Pro. 
    Just as had happed when I tried to do a full install, it failed.  I got an error message that
    "the installer encountered a problem and that I needed to contact the software manufacturer"
    So far, I've tried with both DVD Studio Pro and Sound Track with the same result.  It seems to go through the entire process of copying over files on the content disc before it fails.  On the DVD-SP as soon as it ejects the one (and only) content disc, I get the error.  On SoundTrack, it seems to take all the data from disc 1 (of 3) then it askes for disc 2.  As soon as i put it in and it tries to read it, the the install fails and I get the same error as I listed above. 
    Anybody have am idea of what might be happening?
    Thanks,
    Steve

    Have a look in disc utility and see how your drive is formatted.
    It should be Mac OS extended.
    DM

  • Final Cut studio 2.0.1 sur Mavericks

    I have Final cut studio 2.O.1 installed sur un iMac system OSX.5.8 and I want to install it on a MacBookPro with OS 1.9.2 (Mavericks).
    Is it possible ?

    It will not install directly. You will have to find a work around (plenty of them posted here on the forum.)
    Here is one:
    https://discussions.apple.com/thread/5977104?tstart=0
    x

  • Final cut studio 2 upgrade problems

    i recently purchased the upgrade from final cut studio to final cut studio 2. after entering the upgrade serial number it prompts me for the original serial number. after entering this in, it says number invalid. both copies are store bought and i have tried every variation of the numbers, ie. upper case lower case. i've tried calling the store from which i bought the products but they keep referring me to my installation manual.. please help!!!

    There are two upgrade paths.
    One from FCS1 and the other from individual applications.
    The latter is more expensive.
    Which did you buy and from what original purchase? If you got the wrong one, it won't upgrade.

  • Final Cut Studio 2(Color) and AGP graphics cards

    So I have ordered FCS 2 for my business(Videography with HDV cameras).
    I am on the 2.0 Ghz G5 with dual processors and a 23' Apple Cinema Display.
    The computer came with the ATI 9600 Pro Radeon card.
    All the technical requirements for Color are PCI slotted busses. So it looks like I am at a dead end if I wish to use Color??? (Some people said that the AGP x800XT might work ok, but this is not verified, and who knows what the performance would be anyway).
    A new computer is the only practical solution?

    Read further down the page:
    Application-Specific Requirements
    Motion
    * The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
    * ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
    * ATI Mobility Radeon 9700 or 9600
    * NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
    * For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
    Color
    * The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
    * ATI Mobility Radeon X1600
    * ATI Radeon X1600
    * NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
    * A display with 1680-by-1050 resolution or higher
    * A three-button mouse for full functionality
    All the original poster has to do is buy a new graphics card, that's it.

  • Final Cut Studio 2: Import Problem

    Hello all,
    I am new to these discussion boards, but have been having some troubles with my FCS2 software. I just had my computer serviced by Apple and it came back reformatted. So I install all of my FCS2 programs etc. and it seems now that none of my import features work. I have tried in both color and FCP, I can drag and drop clips but when I go to File>import on either program it does nothing...
    If anyone knows what I could do it would be very appreciated.
    Thanks in advance,
    Joe

    Nothing what so ever, its as if I didnt even click it. Before I had my computer re-formatted it only did it in color. Now it has happened to FCP6 as well... It isnt too big due to the fact I can drag and drop but at the same time its a tediouc hassle to have to give into with such an advanced program.

  • Final Cut Studio 3 - Registration Problems

    Hello,
    I have just installed FCS 3 on my MacBook Pro. When i booted FCP up this morning the registration page popped up but the 'Register Now' Tab is shaded out no matter what i do. Has anyone come across this problem before?
    Also is it ok to install on my MacPro also?
    Thanks

    Sorry, i feel such a fool, yes the 'Region' section wasn't filled in....
    Sorted, many thanks

  • Final Cut Studio install problems

    Well I was thrilled to get Final Cut Studio 2, but cannot get the thing installed. Looking to do a 100% uninstall so I can start fresh
    I have the following disks:
    1. Final Cut Studio
    2. DVD Studio
    3. Livetype1
    4. Livetype2
    5. Motion
    On my first install everything went as planned and it asked me for serial number. I made it thru the first disk with no problems, and the 2nd one installed for awhile, but suddenly stopped. A message popped up saying to put the Final Cut Studio disk back in. When I did that it failed. So I followed these steps:
    Delete the User Preferences
    You can resolve many issues by restoring Final Cut Pro back to its original settings. This will not impact your project files, but you should verify your Scratch Disk location setting after doing this. To reset your Final Cut Pro user preference settings to their original state, do the following:
    In the Finder, go to ~/Library/Preferences—the tilde (~) represents your Home folder.
    Remove the "com.apple.finalcutpro.plist" file from the Preferences folder.
    Remove the "Final Cut Pro User Data" folder from the Preferences folder.
    Remove receipts and reinstall Final Cut Pro
    Another approach you might consider is reinstalling Final Cut Pro. To do this effectively, you need to remove the application and its receipts, then install Final Cut Pro and use Software Update to install additional updates. You don't have to remove everything that was installed with Final Cut Pro. Follow the steps below to completely reinstall a fresh copy of Final Cut Pro. Note: Make sure that you have your installation discs and serial number handy before starting this.
    Open the Applications folder.
    Drag the Final Cut Pro application to the Trash.
    Go to /Library/Receipts.
    In the Receipts folder, select the "FinalCutPro.pkg" file.
    Choose View > as List to view the contents in a list.
    Click the Date Modified column header so you can easily see all of the receipts that were installed at the same time as Final Cut Pro.
    Drag the FinalCutPro.pkg receipt to the Trash, as well as any other items that have the same modification date within 3 minutes of the FinalCutPro.pkg's modification date.
    Click the Name column header to sort the list alphabetically.
    Drag any other receipts whose names begin with "Final Cut Pro" to the Trash.
    Insert your Final Cut Pro installation disc and install Final Cut Pro.
    When finished, use Software Update (under the Apple menu) to update your software to the latest version.
    I started a fresh install, but noticed it never asked me again for my serial number. I was skeptical, but the installation went on and I made it all the way to the last disk, but when I put the Motion disk in the computer seemed to struggle to read the disk and eventually asked for the FCP disk to be put back in which resulted in another error.
    I have tried several times since then to get this thing installed but keep failing. I worry about how it never asks me for a serial number. Are there some files that I am not deleting?
    I have also tried to install one disk at a time and installing without Content.
    Using a brand new Imac

    Not sure if this is related but I've upgraded from FCS 1 to FCS 2 and all went well. I've now started to install all the various application media and Motion fails around 75% through the installation. I've tried to do a disk image of the disk but again that fails approx. 75% of the way through with the error "I/O error"
    Tried the Soundtrack Pro media this morning and got through the first disk and again about 75% through disk 2 the installation failed.
    Maybe Apple has bought a job lot of 'cheap' DVD's to save some money? I'll pop into an Apple store and see what they have to say!
    HVXuser

  • Could I follow the color correction in final cut studio with an imac with 128mg vram?

    Hello:
    Could I follow the color correction in final cut studio lessons(peachpit book) with an imac with 128mg vram? or I need a powerfull card.
    Thanks s lot.

    Yes, you can do the lessons.

  • What is the benefit of "Enable Final Cut Studio color compatibility" in QT?

    Hi(Bonjour)!
    What is the benefit of "Enabling Final Cut Studio " in Quicktime player?
    I'm used to calibrate my monitor to a less bright gamma, suitale for monitoring video content.
    So does the +color compatibility option+ can give me more precision when I color correct my movies?
    Michel Boissonneault

    It does the same thing. The only difference is that the pref is active only when the QT player is active. So the gamma is not effected in other parts of the system.

  • Problems installing Final Cut Studio on my new Macbook Pro

    I just got my new 17 inch Macbook Pro, and am trying to install Final Cut Studio 3.  It installed just fine, and accepted the serial number.  The problem is that every time I open the application, I have to reenter the serial number.  Once I do that, it runs fine, but the next time, I have to reenter the info again.  Anyone have an idea of how to fix this?
    Rob Krampf

    do some searching here.  I remember other people having this problem.  You might also try repairing permissions on your startup drive, deleting your fcp preferences
    https://discussions.apple.com/docs/DOC-2491
    And creating a new account in system preferences:  accounts.

  • Problems exporting HD timeline in older Final Cut Studio HD

    I've been working on an older version of Final Cut Studio HD. I had originally offlined the footage so I could edit it, and I finished onlining the footage with the original HD footage. The aspect ratio of the project and the footage is 1920 x 1080, and the codec of most of the footage and the timeline was set to H.264. The only problem is, now that it's onlined, it refused to render any of the transitions. It gives me some kind of codec error. I have also tried exporting the timeline as a Quicktime Movie, but it always fails at somepoint in the process. I have tried exporting Quicktime Conversion, and it failed too. The only way I was able to get it to output was to change the codec of the timeline and in Quicktime Conversion, but this provided a subpar quality file. I understand that I'm using and older version of Final Cut Pro on an older system, but I'm trying to find work arounds to this issue that will allow me to output a quality full HD file. Any help is appreciated.

    DVCPRO HD 1080i60
    Choose it. Set your Field Dominance to None.
    Gaaaah! That's what I get for trying to save myself some typing.
    Now get on with it. Start editing

  • Enable Final Cut Studio color compatibility

    I was wondering who has this function available in the QuickTime player preferences. If you go to QuickTime>Preferences do you see a checkbox for this as the last item in the General prefs panel?
    What I'm trying to find out is if this is available to FCE4 users, or whether it requires you to have the QuickTime pro player or FCS. If you have both the current versions of both FCE and FCS you should certainly have it, but I'm curious if you have only FCE4 if it's available.
    Thanks very much.

    Hi
    Please tell more (or I'm not clever enough to get it)
    Enable Final Cut Studio color compatibility
    In QuickTime Player 7.6 (Mac OS X.4.11)
    Under Preferences there are three symbols in my version
    General/Full Sceen/Record
    And I can't find anything alike here
    Nor under the title QuickTime-preferences
    which opens System-preferences and the QuickTime menu
    Still nothing as FCS color compatibility.
    Am I looking in wrong direktion ?
    Yours Bengt W

  • Problem Installing Final Cut Studio

    I am trying to load Final Cut Studio on my Mac Pro Tower and it told me that i need to have an Intel processor. How do I fix this problem?

    Understand that running the final cut apps on a g5 is not supported. The PPC architecture of the G5 is quite different than that of an intel machine.
    x

Maybe you are looking for