Final cut studio 2 on a new macbook?

How do I install final cut studio 2 on a new macbook pro? The installer won't start, giving the message PowerPC is no longer supported...
I do want to be able to install my own copy of the program...

Read this: Having trouble installing FinalCut 6 on MacBookPro version 10.7

Similar Messages

Final Cut Studio 2 and New Macbooks with Nvidia graphics

Do the new Macbooks announced today (10/14/2008) meet the minimum system requirements for running Final Cut Studio 2?

Lecturing? Really? Not hardly, but I'll answer your query as succinctly as possible.
Will the new Macbook run Final Cut Studio 2? I will wager that FCP will operate, DVD SP will operate and Soundtrack Pro will operate. I highly doubt Color will operate and am not sure about Motion due to the graphics card.
That should answer your question. To "lecture" some more, where will you have media stored and how will you get media, any sort of media into these applications?
As far as graphics and video are concerned, that distinction has been met above. I'm sure the Macbook will operate Photoshop with no problem.
But again, why not check the minimum tech specs for yourself?

Problems installing Final Cut Studio on my new Macbook Pro

I just got my new 17 inch Macbook Pro, and am trying to install Final Cut Studio 3. It installed just fine, and accepted the serial number. The problem is that every time I open the application, I have to reenter the serial number. Once I do that, it runs fine, but the next time, I have to reenter the info again. Anyone have an idea of how to fix this?
Rob Krampf

do some searching here. I remember other people having this problem. You might also try repairing permissions on your startup drive, deleting your fcp preferences
https://discussions.apple.com/docs/DOC-2491
And creating a new account in system preferences: accounts.

Final Cut Studio & Motion on new Macbook

I read some reports that people couldn't install/run FCS and especially Motion on their Macbook.
I just got my new core duo 2, 2Gz, 2Gb ram model and installed the universal upgrade without any problem, nothing special needed doing at all.
And motion seems to work ok (just tried loading some templates and they worked fine) although I'm sure it would get chuggy with more complicated sequences. I saw 17 fps when one of them was running in the preview window. Good enough for me to learn it.
And FCP works much nicer than on my 1Ghz G4 Powerbook, but I noticed the waveform still takes a while to draw (perhaps that is always going to happen). The screen is high res enough for the FCP layout to look nice and not too tiny/squashed.
I haven't used any of them that much so I will report more when I have put them through their paces.
Anyone else got any experiences to share ?
Macbook2 2Ghz 2Gb Mac OS X (10.4.8)

Yeah, this update is bizarre.
Plus, I was really hoping the new machines would have ATI cards in them since Motion has been crap with the NVIDIA ones. Also, what the heck is up with the glossy only screen?
So much for pro I was really excited for the possibilities of these notebooks too.

Final Cut Studio 2 on new MacBook Pro 15"

Is this configuration enough to run FCS2 on one of the new (June 2009) MacBook Pro 15"?
-2.53GHz Intel Core 2 Duo
-8GB 1066MHz DDR3 SDRAM - 2x4GB
-500GB Serial ATA Drive @ 7200 rpm
-SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
-MacBook Pro 15-inch Glossy Widescreen Display
If so, do I need the 8GB RAM or could I stick with the new standard of 4GB? I don't plan on working with HDV too much, but I may need to edit a few clips of it. Other than that, everything will be standard DV or miniDV.
Thanks.

Yes, these specs will satisfy FCS2, with some exceptions (notably, Color requires a 17" screen). Here is the full list of requirements:
http://www.apple.com/finalcutstudio/specs/
8GB is way overkill for HDV (it's moot at present anyways, as FCP can only utilize 4GB), and WAY overkill for DV.
500GB is enough HD space, but you'll get better performance and reliability with an external HD rather than working with media on your system drive.

Final Cut Studio compatible with new Macbooks Nvidia 9400 chip?

Hi!
First post here. I plan on finally getting what I always needed; a Mac. But MBPs
are a little too expensive for my wallet. I read in the FCS specs that it is not compatible with integrated Intel graphic processors, but I wonder if it applies to newer MB graphics (Nvidia 9400)? Anybody here uses it on their MBs? Does it runs flawlessly?
Thank you

Can't expand the capabilities of a MBP? That's just plain wrong, Nick. Sure the options are limited, but they do exist. First: firewire - buy an adapter so you can use FW400 devices on your FW800 connection. Second: If your capture device is FW400, you can capture to USB2 with some success. I agree that you don't want to use USB2 for editing, though. Your best bet for capture drive is estata, which you can adapt. You have to buy an esata card for the slot.
Or you could buy one of the new flashy Mac Pros that just came out today. That's probably what I'm going to do. You have more options for expansion than you will with a MBP. If you are going with a MBP, put in a little extra for the 7200rpm drive!
http://forums.creativecow.net/thread/8/1024403#1024403

Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

Update the software. There is no reason to run a two year old version.
Russ

Is it possible to install Final Cut Studio 2 with a MacBook 2.1 GHz 13.3in?

I just purchased a new MacBook and Final Cut Studio, but my computer won't let me install FCP 6. I think it is a graphics card problem. Is there something I can purchase or download to make it compatible, or do I need to replace computer or use an older version of FCP?
Thanks
Tara

Hi Tara,
welcome to the forums,
I beleive your MacBook comes with an integrated graphics processor.
Unfortunately FCP requires a separate graphics card see minimum specs in the link below:
http://www.apple.com/finalcutstudio/specs.html
Perhaps you can replace your MB with a MBPro as the latter is perfect for FCP6.
Best,
G.

Final Cut Studio 2 on a MacBook

Hi!
I am thinking about getting a MacBook and want to know if FinalCut Studio 2 will run on it. I know its not recommended but will it run on a MacBook 2.2GHz with Leopard?
If not can I export movies I work on at a mac lab in Final Cut Studio to Final Cut Express?
Thanks,
Brian

I ran Final Cut Pro on a powerbook G4, no probs, and I cannot se how a newer machine should not be able to do the same.
I don't think that the entire suite wil run, but FCP will I am sure.
Anyway found this:
http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=43717
These are rendering benchmarks, and I'm sure that with 5 video tracks, and 6 audio tracks you don't just drag 10 minutes of video 50 frames without it lacking a bit on the screen.
MORTEN BETA

Cant install final cut studio on my new mac

hello everybody,
i recently bought a new MacBook Pro ( best 15" model available only because of final cut!). I had final cut (7) on my old MacBook. I synchronized the 2 computers but a i had to reinstall view programs (Aperture, Adobe…- it worked normally).
Here comes the thing. I tried to reinstall final cut studio. It didn't work. I downloaded an uninstaller. It didn't work. I searched the whole library for files that are still there and may block the reinstallation. There were some but after deleting them it still didn't work either.
The error is not known or at least not shown. The installation program just tells me that an error occurred.
My feelings are a mixture of dosserpointment and anger, because this program was the main reason why i bought my 3.000€ mac!
Pleease help me… You are my last chance… any hint could help me

Syncing could be the issue because of licensing or the installer thinking there is some sort of licensing conflict. If Digital Rebellion's FCS unistaller isn't doing the job you only have a few options.
1) Removing everything manually - This can be done but it isn't for the novice.
2) Complete reinstall(presuming you have all of your discs) - Make a disc image of your HD to another drive and then do a clean install. A clean install would be recommended even if you were just upgrading from FCS2 to 3.

Final cut studio 2 on new imac 24'' 2.8 GHz

Hi,
I am, in the near future, starting wedding videography and my idea is to purchase Final Cut Studio 2 and the new imac 24" 2.8GHz with 4gb RAM and the 1TB hard drive.
My question is this, will this computer be powerful enough for me to run the Final Cut Studio "smoothly" while editing HD quality video?
My business will be based on this so i want to be sure!!!
Thanks in advance!

I am, in the near future, < </div>
How do you communicate with us then?
Do not start your business based on a computer and a piece of software. Research the business first, then decide what you will need and then figure out a way to finance it. When you get down to starting your event photography business, the computer is going to be the smallest captial investment you make; do not scrimp on it.
The iMac will only satisfy your needs for a few months but it will do the job. You must also have printers, scanners, backup routines and external drives. Umm, insurance.
bogiesan

Re installing Final Cut Studio on my NEW Mac pro?

I originally purchased Final Cut Studio (on a G5 Power PC), Then installed the universal crossgrade,
then installed Final Cut Studio 2. Now I have a New Mac Pro (Intel Chips) How do I go about
reinstalling FCS? do I need the original serial key from the first version or do I just use my
FCS 2 serial Key?
J>H<L

J>H<L
You'll need both keys, but you only have to do one installation.
The FCS2 installer will ask for the FCS2 key. If that passes, another window will open asking for the FCS key. If that key passes, then it's just a normal installation.

Final Cut Studio - Install on Two Macbook Pros?

I just purchased the academic version of Final Cut Studio. I have been reading the forums and have discovered that it is possible to install this on one desktop and one laptop, and both work as long as you are not working on them at the same time.
However, I have not been able to find if it is possible to install Final Cut Studio on two Macbook Pros. Does it have to be one desktop and one laptop or is it limited to two installations total? The license agreement says one desktop and one laptop, however how would it know if it were two laptops?
Thank you for your feedback.

Used by you doesn't mean used by someone else that doesn't own the computer
I'm an editor. Been one for several years. Any company I've worked for and edited with FCP has been on the company's computer and software, not owned by me. Are you saying that an editor for a company is expected to purchase their own computer and software in order to edit for a cooperation? Unlikely. A freelance or independent editor may have their own system that they edit on, but I am talking about an editor as an employee at a cooperation (where personal computers are restricted) or Macs and software that are available at an educational institution like an Apple Authorized Training Center.
I went to Apple Campus as a requirement of becoming ACT and "used" Final Cut pro on a computer that was not owned by me. Several others have done this and will continue to do so because it's a loophole that is apparently intended in the SLA for these reasons. Unless you're saying that Apple is breaking their own SLA agreement and advising others to do so in their training facility requirements which states:
The AATC is responsible for:
• Providing all hardware and software described in this document
The definition of the word "used" in this circumstance begs further clarification. Until that happens one can assume that the ordinary circumstance of its meaning for this situation is open to various interpretations.
OK so let's say I agree with your comment even if I don't. It still doesn't mean that if I owned a laptop and desktop that I can't use both at the same time according to the SLA. Only that they can't both be used at the same time over a network. So If I was encoding or rendering video on my desktop I could still use the laptop to edit at the same time.

Final Cut Studio 2 on new iMac..

Hello I just recieved a new 27 in imac with OS 10.8.4...I need to run Final Cut Studio 2 on it I will be getting Final Cut X soon and will need to be able to edit older projects too.. ..I've seen some options on how to get it to install but am a bit confused..If someone could walk me throught it..it would be much appreciated

Michael Grenadier wrote:
Here's a tutorial
http://www.secondchairvideo.com/?p=1975
Although this tutorial suggests creating a bootable drive with the OS installer on it, that's not necessary. You can just create disk images as he describes and mount them.
I am not sure why you did not just post this tutorial instead of requesting me to describe a workflow.
In the time it took me to research a workflow for Pacifist for a link for the OP, it seems he spent 6 hours of wasted time.
Michael:
Have you ever "uninstalled" Rosetta after installing it on a Lion or Mt. Lion Mac? and
I believe you told me earlier you do not use FCS2. Is that correct and if so what is your connection to offering so much repeated installation advice about a product that you do not use yourself?
I note that I also do not use FCS2, but I am attempting to get a copy to attempt to implement the Jeremy Johnstone "Text Edit" solution (no dangers of using Terminal). Unfortunately, all sources of purchasing a copy of FCS2 are just too expensive for me with no ultimate need for the program, after I figure out how to install it.
If you know of a copy of FCS2 that can be "lent" to me for "fair use" educational means of figuring out how to install it (and thereafter erasing that copy from my Mac), please let me know.

Cannot install Final Cut Studio 7 on new Mac Pro

I've just purchased Final Cut Studio 7 (Academic edition) for my Mac Pro (brand new G4 running 10.6.2), and it refuses to install. When I start the download package I get an Alert:
"Final Cut Studio Installer requires that your system have a Quartz Extreme capable video card."
and just quits. I looked on the specs online (http://www.apple.com/finalcutstudio/specs/) and it states that I need
"ATI or NVIDIA graphics processor (integrated Intel graphics processors not supported)"
I have 2 NVIDIA graphics cards, both GeForce GT 120. Are these not Quartz Extreme capable video cards?

First of all you don't have a G4. A G4 is an obsolete computer that doesn't run Final Cut Studio.

Final Cut 4.5 and New MacBook Pro

I've been out of the loop for a while. I had a 1.5ghz Powerbook and Final Cut HD, etc. I recently bought a new MacBook Pro and was suprised to see that I could not open Final Cut Pro anymore (says I don't have an AGP card). What're my options? Thanks

You need the Intel version of FCS, which is version 2.
Should run you about $499.00 when it ships next month.
Apple has an inexpensive upgrade available for nearly fifteen months and was promptly displayed at its web site.
That expires on March 19th.
It pays to stay in the loop I guess.
I'm less patient than Jim.

Final cut studio 2 on a new macbook?

Similar Messages

Maybe you are looking for