Final Cut Studio 2.x Sony DCR-TRV900 Compatibility

My Sony DCR-TRV900 camera is not listed in the FCS 2.x compatible devices list. Any one know what this means exactly? Apple techs just say "it's not compatible" without further explanation. I upgraded to the Mac Pro/FCS from Adobe Premiere Pro running on my PC expecting increases in quality and now my film quality has gone south with grainy editing footage etc.
Thx
DBL

DBLewis wrote:
My Sony DCR-TRV900 camera is not listed in the FCS 2.x compatible devices list. Any one know what this means exactly?
As long as you have an IEEE 1394 (FireWire/iLink) connection (which you do) then you should be fine. The support issue may have to do with device controllability (in Log and Capture, play/scrub/etc the camera from the FCP control interface).
If Final Cut cannot control your device for whatever reason, there is the simple workaround of using the +Non-Controllable Device+ preset under the Capture Settings tab.
For more info, refer to page 287 of the FCP user manual.

Similar Messages

Final Cut Studio 2 and Sony SR1e | AVCHD Format

Hi,
I'am new to this forum and can't find any useful information regarding the support of the AVCHD-Format used by Sony's SR1e.
So does the latest Final Cut Studio 2 support the .mts AVCHD Format by the SR1E?
I see Sony in the partner list, but the cam is not on the device list.
I found some scripting and complicated ways to convert the .mts to mpeg, but maybe there is a smarter solution out there?
Or is it really true, that I have to use the Nero Burning Application on Windows to convert the AVCHD's instead of the latest Final Cut Studio editing software?
btw: Squared 5's Streamclip Software is not able to convert the .mts files.
Kind Regards, Carlo

Hi,
I'am new to this forum and can't find any useful
information regarding the support of the AVCHD-Format
used by Sony's SR1e.
So does the latest Final Cut Studio 2 support the
.mts AVCHD Format by the SR1E?
I see Sony in the partner list, but the cam is not on
the device list.
I found some scripting and complicated ways to
convert the .mts to mpeg, but maybe there is a
smarter solution out there?
Or is it really true, that I have to use the Nero
Burning Application on Windows to convert the AVCHD's
instead of the latest Final Cut Studio editing
software?
btw: Squared 5's Streamclip Software is not able to
convert the .mts files.
Kind Regards, Carlo
Not sure about FCS2 but you do have options with a capture card and bring in to FC in many different codecs. Depending on your computer you could use a Black Magic Intensity card for the all digital HDMI port on this camera and bring it in as DVC PRO HD and edit in an all digital all I frame codec. Even if Apple comes out with support for this AVCHD you may still want to avoid it as most HDV shooter/editors do.
Good Luck
Z1&V1user

How can I import .mts files into Final Cut Studio from my Sony High Def Camcorder

How can I import .mts files from my Sony High Def camcorder into Final Cut Studio?

Also see: https://discussions.apple.com/community/professional_applications/search.jspa?pe opleEnabled=true&userID=&containerType=&container=&spotlight=true&q=.mts

Final Cut Studio 6 and Sony Deck HVRM15U

Is Final Cut Studio 6 compatible with the Sony HVRM15U deck. NTSC Format connecting to Mac with Firewire and recording back to tape from Final Cut.

I bought the HVR-M15U Deck last week but I am having difficulty understanding the Menu settings. I intend to transfer HDV video (mini-DV tape) from the deck to FCP and then from FCP out to the Deck on a full size DV tape. I have connected firewire directly to the computer (no 3rd party capture card) and FCP tells me that my device capture pre-sets are wrong. I used Easy Set-up for HDV. Is there something I need to do with the Deck's menu setting so that I match up with FCP? Also I tried capturing from the deck to imove 08. imovie does control the deck but I get no image in the imovie capture screen on import. Anyone used the deck with imovie 08?

Final Cut Studio 2 and Sony HDR-HC5

Hello, my name is Marc Bostian.
I'm a new Final Cut user, have shot some video on my HD Video on my Sony HDR-HC5. I have hooked it up with a FireWire 800 cable. to my Dual 2.3 G5 tower. I am able to control the camera in the Capture windows, but I'am not able to see the video on screen or capture anything.
I'm using an Easy Setup of HDV - 1081i60 FireWire Basic.
I have several full tape I need to transfer over and get started learning how to edit. I'm hoping I have something set wrong.. ??
thanks
Marc

Welcome to the club' .. I have been on Final Cut since #1, which is about 9 years I believe. And for me, I sometimes feel I have just scratched the surface'. But Final Cut is professional grade software, with so many different possible ways to do things. Unfortunately it has never been just plug & play, at least for me. I can't even remember how many hours I have sat & scratched my head wondering what was wrong, and it would turn out to be something simple I overlooked because I didn't take the time to learn the fundamental's .. I was always to anxious to make a project, and just dive in .. really wasting a lot of time stumbling along by experimentation.
I will say this though, these forums are a life saver, especially the FCpro. forum, for me anyway. A couple weeks ago I didn't have a clue why all of a sudden I couldn't capture HDV. anymore when it has been working fine for close to three years .. Even the certified Apple tech's where I have purchased all my computers couldn't, or probably wouldn't tell me what was up .. but I have the feeling they new about the conflicting issues with earlier software and the new Intel processor's .. After all they are in business to sell computers, not teach. They suggested I call Apple, or search
these forums. There a lot of very helpful & knowledgeable folks here .. and usually most problems get solved .. for better or worse. Lots of Luck ...

Final cut express 4 with Sony DCR VX2000E

When I connect my camcorder Sony DCR VX2000E through the firewire 400 socket I get the message it is not connected or switched on. I can't capture any video.
Who can help ?

Nobody with the amount of information you've provided. What OS, what version of QT, what drives are you using, how are they and the camera connected, what settings are on the media, what settings are you using in FCE, and does the system profiler see the camera?

Is a Sony DCR-TRV900 compatable with iMovie 8?

Does anyone use a DCR-TRV900 (old, but good) video camera with iMovie8?

Bengt Wärleby wrote:
.. Asymetrical - Yes but not enough. Did it => Expensive repair to Camera.
.. you Swedish Vikings are too strong, .. your hands are not made for tiny Japanese products
SCNR!!

Troubles with playing out from Final Cut Studio to a camera

hello!
have troubles when playing out to a DV camcorder. i 've got a mac mini intel, final cut studio and 2 sony DV cameras with dv in.
capturing works fine, but when i put the captured movie to the timeline, then on both cameras there are 4 small bars (2 vertical, 2 horizontal), which shows some content of the captured files. the rest of the display stays black. looks very strange.
tried to reinstall quicktime, tried to erase quicktime receipts and quicktime settings.. it worked then, but just for one time. after restarting the mac the same problem occured.
thanks for your help!!
mac mini intel Mac OS X (10.4.7) 2 GB ram, external iomega harddrive

stopped working again...
gettin stupid with that stuff!!
shot a pic to show you how it looks:
http://service.gmx.net/de/cgi/thumbnail?CUSTOMERNO=4448322&t=de505972624.1156586 439.bbaf00f6&jobid=&nobg=1&folder=%2FMeine+Bilder%2F&file=FCS%2Dproblem%2Ejpg&si ze=1575x1100

Sony HDR-CX7 and Final Cut Studio 2 ???

Hey there people,
I live in Australia and I am new to this forum & couldn't actually locate a specific thread for my questions so hopefully anyone could be of assistance.
Basically, I have just bought a Macbook Pro 2.4ghz notebook, Final Cut Studio 2 and a Sony HDR-CX7 hi def camcorder.
Has anyone come across issues with Final Cut Studio picking up the hi def clips straight from the Sony camcorder when you try to import files to Final Cut? After some research, it seems as though this can simply be fixed by buying a FireWire cable to connect from the camcorder straight to the FireWire port on the notebook. Is this correct??
Any assistance would be great or if anyone knows of a link to a thread specifically for the Sony HDR-CX7 and Final Cut Studio 2. The standard def seems to work ok but the hi def isn't picked up on either the Macbook direct or Final Cut Studio. I just would like to ensure that i am able to use the camcorder hi def with Final Cut
Cheers!!

You should be able to transfer from the camera to FCP through the log and transfer window with a FW cable... FCP 6.0.1 added AVCHD support anyway...
Jerry

Final Cut Studio - Sony VTR HVR-M15P

Can anyone tell me if they have successfully used a Sony HVR-M15P VTR tape deck in Final Cut Studio. On the compatibility list a Sony HVR-M15U is there. Is this the same deck but Pal Version?

yes I have used the deck to firewire import to FCP on a powerbook G4 1.67Ghz from tapes recorded on sony a1 hdv and a canon MV6i dv cameras with no problems.

Final cut Studio package is it worth the money ?

I have the most recent iLife package along with Toast, and Photo to Movie. My main goal is to make high quality photo slideshows to play on a TV. Will the Final Cut Studio Package really produce a better looking product, or does it just give me more control over what I can do with the images?
Chris

The Pro Apps allow for the use of conventional DVD-R media (like Verbatim DVD-R) as well as "Digital Linear Tape" or DLT which is what professionals prefer to write to rather than burning to standard DVD-R media.
Do a search on the DVDSP forum for DLT devices like the Quantum DLT4000 to learn more about this process.
Standard DVD-R media (for the most part) has significantly higher error rates as opposed to DLT which is extremely precise. From DLT an exact Glass Master can be produced which is like the "mold" for all future commercially pressed DVD copies which in turn also has far fewer error rates than conventional DVD-R media since it is pressed rather than burned to the surface of the media. Hope this makes sense.
This entire process is much more conducive for mass distribution of DVD's and can be very costly for small or what is called a "short run".
I can't give you an opinion on FotoMagico since I do not use it. Fred Shippey & others know much more about this app than I do. Anyway, I sure hope the above is semi helpful & good luck to you!
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video)

Final Cut Studio 2: Requirements and Recommendations

Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b

SORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b
Message was edited by: Rinaldo

What Mac to get for Final Cut Studio?

I've been doing most of my video editing for the last year or so in Sony Vegas on a PC. I'm looking to get into it a bit more seriously and want to make the switch to Final Cut Studio.
Can I run it on a Macbook Pro? Can I run it WELL on a Macbook Pro? Currently I'm running Sony Vegas on a PC with a Q9350 quad-core CPU, 4gb ram, and an 8800GT graphics card, and I'm not fully satisfied with the way it runs (encoding times are fine, but it's difficult to preview within the software with any semi-complex effects added). What should I be looking for in terms of processing speed and whatnot here? Could I get away with the 13 or 15 inch Macbook pros and still run things well?
Hard drive size is not an issue, as everything will be archived to a server.

This isn't the thread in post in.
Try here
http://discussions.apple.com/forum.jspa?forumID=939
It depends on which MBP, what type of video you are editing, and other factors.
Remember as well that FCS3 2009 includes FCP, DVDSP, Compressor, Color, Motion, and Cinema Tools, some of which are GPU based in part.

Recommended Cameras for Final Cut Studio

We have a Power Mac G5 with Final Cut Studio and we recently bought a Canon Elura 80, which did not work with our system. It was on the apple list for cameras. What have the members of this forum found to work for them for a camcorder capture device?
THanks

Go with a Sony. They are tanks. They last forever. Here's a good one
http://www.bestbuy.com/site/olspage.jsp?skuId=7602631&type=product&id=1130982552 661
Using one right now plugged into the font port of my G5 with 7 external FW drives plugged into the rear FW port and no PCI cards. I Don't get dropped frames or any problems typically seen with deck issues.

What Is The Difference With FInal Cut Studio 2 Academic To Full Version?

Hi there I just got a Macbook Pro and plan on buying Final Cut Studio 2 but found the Academic version cheaper and was wondering what the difference is especially with quality and the handling of hd video Sony EX HD to be exact). Thank you for any responses.

The software is the same; the only difference is that you cannot upgrade an academic version and you have to be able to qualify for the academic pricing (students and teachers).
-DH

Final Cut Studio 2.x Sony DCR-TRV900 Compatibility

Similar Messages

Maybe you are looking for