Final Cut Studio 3 - Registration Problems

Hello,
I have just installed FCS 3 on my MacBook Pro. When i booted FCP up this morning the registration page popped up but the 'Register Now' Tab is shaded out no matter what i do. Has anyone come across this problem before?
Also is it ok to install on my MacPro also?
Thanks

Sorry, i feel such a fool, yes the 'Region' section wasn't filled in....
Sorted, many thanks

Similar Messages

Final Cut Studio 3 installation problem

Working on my Mac Pro 1,1 and I'm habing rouble re-installing Final Cut Studio 3 on it.
Here's the background: I've hesiated updating the OS beyond 10.5 so that I could keep using a legacy copy of ProTools LE. Recently, I decided to add a new hard drive to one of the open bays so that I could have a 10.7.5 startup disc for most applications, and I could simply rebppt in 10.5 when I need to. everything went smootly until I tried to re-install FCS-3.
The installation keeps hanging up whenever I try to install any components that need content (i.e. DVD Studio Pro, Sound Track, etc...). As a test, I did an install of just FCP (and default Compressor) and that seemed to be OK. Once installed, I thought I'd try to add one compnent at a time - so I started with DVD Studio Pro.
Just as had happed when I tried to do a full install, it failed. I got an error message that
"the installer encountered a problem and that I needed to contact the software manufacturer"
So far, I've tried with both DVD Studio Pro and Sound Track with the same result. It seems to go through the entire process of copying over files on the content disc before it fails. On the DVD-SP as soon as it ejects the one (and only) content disc, I get the error. On SoundTrack, it seems to take all the data from disc 1 (of 3) then it askes for disc 2. As soon as i put it in and it tries to read it, the the install fails and I get the same error as I listed above.
Anybody have am idea of what might be happening?
Thanks,
Steve

Have a look in disc utility and see how your drive is formatted.
It should be Mac OS extended.
DM

Final Cut Studio 2 Registration

Dear all,
As a newbie, please kindly help me with any advise.
I recently purchased Final Cut Studio 2 (FCP2). Once I installed, the 'register now' button, couldn't be selected (dimmed). The only button that could be selected was 'register later'.
Could anybody help me how this thing happened? How do i register then? Do i need to register?
Thank you all for your kind attention.
MacPro 3Ghz Dual Quad Core / 5GB RAM / 250GB Int HD / 1.5TB Ext HD / FCS 2 Mac OS X (10.4.9)

Thanks all,
I did follow your instructions, ~/Library/Preferences:
- com.apple.FinalCutPro.plist (deleted)
Final Cut Pro User Data,
- Final Cut Pro 6.0 Preferences (deleted)
- Final Cut Pro OBJ Cache (deleted).
First time I re-launch after those deletion, it did appear the registration information form. But, still, the button 'register now' still couldn't be selected, even though at that time I was connected to the internet.
Please kindly let me know if any other way to get it registered.
Thanks a lot.
Note: Another thing that happened, on 'Color' application that came with Final Cut Studio 2 package, when I was trying to launch, message appear: 'Unable to initialize OpenGL. Make sure Video Desktop is disable', and straight quit. Any comment? Thx
MacPro 3Ghz Dual Quad Core / 5GB RAM / FCS 2 Mac OS X (10.4.9)

Final cut studio 2 upgrade problems

i recently purchased the upgrade from final cut studio to final cut studio 2. after entering the upgrade serial number it prompts me for the original serial number. after entering this in, it says number invalid. both copies are store bought and i have tried every variation of the numbers, ie. upper case lower case. i've tried calling the store from which i bought the products but they keep referring me to my installation manual.. please help!!!

There are two upgrade paths.
One from FCS1 and the other from individual applications.
The latter is more expensive.
Which did you buy and from what original purchase? If you got the wrong one, it won't upgrade.

Final Cut Express HD registration problem

Is there some way to invoke the registration window to get Final Cut Express HD to attempt to send the registration back to Apple? I installed it on the master iMac that I'm going to clone to 16 other iMacs, but when it gets cloned, the 16 will need to be re-registered, of course (they're individual licenses, sadly, and not multi-user ones).
If I delete "Library/Application Support/ProApps/Final Cut Express System ID" it then prompts for my name and serial number, but because I'm behind a proxy server and a firewall, the registration doesn't work. I'd like to try invoking the registration window to see if using a different proxy server will help, but the first time I entered my serial number, it sat there for a while and then complained about not being able to send the registration but it did say something like further attempts will be made later to send it. I want to bring this attempt forward, so that I can be sure I can register this software on all 16 iMacs before next semester.
Thanks.

Presumably you have 16 licenses. If you're going to push a disk image to multiple machines they will all have the same serial number. You will then need to go to Library/Application Support/ProApps on each machine and remove the Final Cut Express system ID. When the application is launched on each machine you can enter a separate serial number for each machine and register it.

Final Cut Studio 2- Color problem on Mavericks

Hello,
I've a little issue with Color from FCS 2 on Mavericks.
during playback or correction preview flashing- in FCP and others evyrything is OK, only in Color is that dysplay preview issue- any ideas?

Read further down the page:
Application-Specific Requirements
Motion
* The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
* ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
* ATI Mobility Radeon 9700 or 9600
* NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
* For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
Color
* The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
* ATI Mobility Radeon X1600
* ATI Radeon X1600
* NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
* A display with 1680-by-1050 resolution or higher
* A three-button mouse for full functionality
All the original poster has to do is buy a new graphics card, that's it.

Final Cut Studio 2: Import Problem

Hello all,
I am new to these discussion boards, but have been having some troubles with my FCS2 software. I just had my computer serviced by Apple and it came back reformatted. So I install all of my FCS2 programs etc. and it seems now that none of my import features work. I have tried in both color and FCP, I can drag and drop clips but when I go to File>import on either program it does nothing...
If anyone knows what I could do it would be very appreciated.
Thanks in advance,
Joe

Nothing what so ever, its as if I didnt even click it. Before I had my computer re-formatted it only did it in color. Now it has happened to FCP6 as well... It isnt too big due to the fact I can drag and drop but at the same time its a tediouc hassle to have to give into with such an advanced program.

I'm having problems registering Final Cut Studio

I recently purchased and installed Final Cut Studio. I successfully installed it, except there was a message at the beginning of the process saying there was some sort of registration problem. I don't know exactly what the message was and can't replicate it now. the program did complete the install process but when I try to open individual application I am prompted to enter a registration again. I tried entering the number that registers the whole suite but that didn't work.

I am afraid to do this because my hard drive is almost full. this brings up another question. I wanted to do a custom install and put what ever I could on another ATI drive in my computer but somehow that custom install thing seemed to fly right by without giving me an oppourtunity to do anything. What will happen if I reinstall? Will it install all the content again? I only have 9GB left on that hard drive. I was going to try to move all that once I was able to open the apps. How can I just uninstalll everything and just start over?

Final Cut Studio install problems

Well I was thrilled to get Final Cut Studio 2, but cannot get the thing installed. Looking to do a 100% uninstall so I can start fresh
I have the following disks:
1. Final Cut Studio
2. DVD Studio
3. Livetype1
4. Livetype2
5. Motion
On my first install everything went as planned and it asked me for serial number. I made it thru the first disk with no problems, and the 2nd one installed for awhile, but suddenly stopped. A message popped up saying to put the Final Cut Studio disk back in. When I did that it failed. So I followed these steps:
Delete the User Preferences
You can resolve many issues by restoring Final Cut Pro back to its original settings. This will not impact your project files, but you should verify your Scratch Disk location setting after doing this. To reset your Final Cut Pro user preference settings to their original state, do the following:
In the Finder, go to ~/Library/Preferences—the tilde (~) represents your Home folder.
Remove the "com.apple.finalcutpro.plist" file from the Preferences folder.
Remove the "Final Cut Pro User Data" folder from the Preferences folder.
Remove receipts and reinstall Final Cut Pro
Another approach you might consider is reinstalling Final Cut Pro. To do this effectively, you need to remove the application and its receipts, then install Final Cut Pro and use Software Update to install additional updates. You don't have to remove everything that was installed with Final Cut Pro. Follow the steps below to completely reinstall a fresh copy of Final Cut Pro. Note: Make sure that you have your installation discs and serial number handy before starting this.
Open the Applications folder.
Drag the Final Cut Pro application to the Trash.
Go to /Library/Receipts.
In the Receipts folder, select the "FinalCutPro.pkg" file.
Choose View > as List to view the contents in a list.
Click the Date Modified column header so you can easily see all of the receipts that were installed at the same time as Final Cut Pro.
Drag the FinalCutPro.pkg receipt to the Trash, as well as any other items that have the same modification date within 3 minutes of the FinalCutPro.pkg's modification date.
Click the Name column header to sort the list alphabetically.
Drag any other receipts whose names begin with "Final Cut Pro" to the Trash.
Insert your Final Cut Pro installation disc and install Final Cut Pro.
When finished, use Software Update (under the Apple menu) to update your software to the latest version.
I started a fresh install, but noticed it never asked me again for my serial number. I was skeptical, but the installation went on and I made it all the way to the last disk, but when I put the Motion disk in the computer seemed to struggle to read the disk and eventually asked for the FCP disk to be put back in which resulted in another error.
I have tried several times since then to get this thing installed but keep failing. I worry about how it never asks me for a serial number. Are there some files that I am not deleting?
I have also tried to install one disk at a time and installing without Content.
Using a brand new Imac

Not sure if this is related but I've upgraded from FCS 1 to FCS 2 and all went well. I've now started to install all the various application media and Motion fails around 75% through the installation. I've tried to do a disk image of the disk but again that fails approx. 75% of the way through with the error "I/O error"
Tried the Soundtrack Pro media this morning and got through the first disk and again about 75% through disk 2 the installation failed.
Maybe Apple has bought a job lot of 'cheap' DVD's to save some money? I'll pop into an Apple store and see what they have to say!
HVXuser

Problems installing Final Cut Studio on my new Macbook Pro

I just got my new 17 inch Macbook Pro, and am trying to install Final Cut Studio 3. It installed just fine, and accepted the serial number. The problem is that every time I open the application, I have to reenter the serial number. Once I do that, it runs fine, but the next time, I have to reenter the info again. Anyone have an idea of how to fix this?
Rob Krampf

do some searching here. I remember other people having this problem. You might also try repairing permissions on your startup drive, deleting your fcp preferences
https://discussions.apple.com/docs/DOC-2491
And creating a new account in system preferences: accounts.

Problems exporting HD timeline in older Final Cut Studio HD

I've been working on an older version of Final Cut Studio HD. I had originally offlined the footage so I could edit it, and I finished onlining the footage with the original HD footage. The aspect ratio of the project and the footage is 1920 x 1080, and the codec of most of the footage and the timeline was set to H.264. The only problem is, now that it's onlined, it refused to render any of the transitions. It gives me some kind of codec error. I have also tried exporting the timeline as a Quicktime Movie, but it always fails at somepoint in the process. I have tried exporting Quicktime Conversion, and it failed too. The only way I was able to get it to output was to change the codec of the timeline and in Quicktime Conversion, but this provided a subpar quality file. I understand that I'm using and older version of Final Cut Pro on an older system, but I'm trying to find work arounds to this issue that will allow me to output a quality full HD file. Any help is appreciated.

DVCPRO HD 1080i60
Choose it. Set your Field Dominance to None.
Gaaaah! That's what I get for trying to save myself some typing.
Now get on with it. Start editing

Problem Installing Final Cut Studio

I am trying to load Final Cut Studio on my Mac Pro Tower and it told me that i need to have an Intel processor. How do I fix this problem?

Understand that running the final cut apps on a g5 is not supported. The PPC architecture of the G5 is quite different than that of an intel machine.
x

I have a problem at start Final Cut Studio

The problem is at start Final Cut Studio when I stay conected to internet, the program close unexpectedly, this problem occurs only weekend to 10:00am - 1:00pm, after that it works properly.

is anybody else working with final cut on the same network? If both versions have the same serial number, you will have a problem.

Final Cut Studio upgrade to Final Cut Studio 2 problem

I am trying to upgrade my G5 from Final Cut Studio to Final Cut Studio 2, I have the key for the upgrade, but it is asking for the serial key of the original Final Cut. I have it, but it still won't accept, says it is an invalid serial number. I bought my "turn-key" system from B&H photovideo and had no problems with the system or programs until this. I cannot understand what is going on. I have a previously used Final Cut Studio 2 software. All materials are here, and the key seems good, I just can't get the installer to recognize my original copy. Any suggestions?

Call Apple.

Final Cut studio install problem.

Just installed Final cut Studio, problem is i got everthing, except FCP7. why? I tried to reinstall but its not working...
Help!

You can't install FCP 7 if FCPX is already on your system. Remove everything with this: http://www.digitalrebellion.com/fcsremover/
Install FCS3 first, run all updates then download FCP X again. AppStore knows that you already payed for it.

Final Cut Studio 3 - Registration Problems

Similar Messages

Maybe you are looking for