Final cut studio 3 will not start unless connected to my old mac

Ok. I bought a new 2.3 gig processor, 12 gig ram, 512 SSD, 17" macbook pro, unfortunately with lion preinstalled. I installed my copy of FCP studio 3 and no problem. However the FCP install is forcing me to log into my old laptop that has FCP installed. this will not work for me as I am about to wipe that laptop and regift it to a different employee in another state. Has any one seen this and how do I fix it. TXA

Okay I found the solution. Here is what happened, I installed from the original disc, however when I opened FCP to test the application, I was also logged onto my old machine and transferring files from my old home folder. FCP saw a similarly named home folder and assumed that the FCP document folder on my old machine was the right scratch disk. So later I tried to open FCP and found that I had a "missing" scratch disk and I repointed to my raid. then the FCP froze, requesting I log into my old mac. I did so, imediatly posted this issue on the forum. However sense then I have ejected the network drive of my old machine and restart FCP. the error no longer show up. I am sorry for taking up folks time with this, but I wanted to post the solution incase someone else blunders into the issue.

Similar Messages

Final CUt Studio 2 will not run on my Mac Pro & Macbook Pros simultaneously

I was under the impression that the licensing contract for FCPS2 allowed for the software to be installed and run on a desktop and a portable machine simultaneously. Am I wrong? I purchased Final Cut Studio 2 legally, and have installed it on my Mac Pro and my Macbook Pro, but if I try to open one of the FCS apps while one is running on the other computer, I get a protection error message and have to shut down the app. Does anyone know a workaround to this other than shutting off airport on one of the machines?

I was under the impression that the licensing contract for FCPS2 allowed for the software to be installed and run on a desktop and a portable machine simultaneously. Am I wrong?
Yes, you are wrong.
The license allows for the installation of a copy on each machine but they can not run simultaneously. The intention is to allow users to work with a laptp while away from the main editing machine. If you need the capability running two copies at the same time, buy another copy.
Good luck,
x

Final cut 10.1 will not output or input thru Blackmagic intensity shuttle thunderbolt on 2013 Retina MBP while Premere Cs6 does

Final Cut 10.1 will not output or input thru Blackmagic intensity shuttle thunderbolt on 2013 Retina MBP while Premere Cs6 does

As I mentioned, Premere Cs6 has no issues with the BM Intensity Shuttle Thunderbolt. This proves that the Mac sees the shuttle. iMovie, like FCPX 10.1 does not see it. Not sure if this is an Apple issue or a BlackMagic issue. I plan to contact BlackMagic on Monday out of curiosity. This issue is more of a surprise than a dead end. Happily there are easy workarounds for capture. I use the BlackMagic software to capture. My main issue seems to be that I am unable to use FCPX to output through the Shuttle. Fortunately I have a Mac Pro and an older BlackMagic card which has worked. It is so very nice to skim video on an SSD. No lag and no wear and tear on a mechanical hard drive. The 1Tb Apple SSD is shockingly fast. It is a new world.

Upgraded to Mac OS X Snow Leopard and final cut express 4 will not work

upgraded to Mac OS X Snow Leopard and final cut express 4 will not launch but my final cut express HD 3.0 version comes up. I reinstall my final cut express 4 upgrade disc and it still will not launch.
Where do I go from here?

You installed from the discs, right?
What happens when you try to launch? What are you doing to launch and what happens you do it? Can't see you computer from here. If you probably need to contact Apple with an installation issue on a new computer.

On cold boot or restart, MacPro will not start unless CD Tray is open. Any ideas why ?

On cold boot or restart, MacPro will not startup unless CD Tray is open. Any ideas why ?

hello Singyt, the bug report associated to this kind of crash indicates that it might be a malware related issue.
your crash report also shows a file named "urixalog.dll", which doesn't turn up any search hits on google, which is also slightly suspicious. could you search for that file on your pc and upload it to a site like virustotal.com in order to analyze it.
please do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes].
[[Troubleshoot Firefox issues caused by malware]]
edit: the bug report also suggests that a monitoring program named spector pro/360/... which essentially acts like malware, might cause the issue. in case you have that installed please remove it. otherwise [https://support.mozilla.org/en-US/kb/Firefox%20crashes%20when%20you%20open%20it#w_backdoor-ulrbot-c here] would be a removal guide for urixalog.dll

Final Cut is Crashing--Will not Open

OK, I have repaired permissions, trashed preferences, unloaded all the audio plugins (mostly because they take forever when FCP opens), and finally reinstalled FCP Studio 2.
The only thing on my startup disk is OSX SL and programs. I always work off external drives. I have had this setup for some time now - since SL came out and all of a sudden FCP will not open, and I get the following Crash report. All other FCP Studio2 apps open.
I also have a recent install of Logic Studio, but FCP was working after this for a few weeks.
I have also seen this post that refers to illegal copies of FCP.
"Yes the answer is simple. The new prokit update recommended for users of FCP will DISABLE any version of FCP that might have come from a less-than-legitimate source if you know what I mean. very clever.
I got a new copy of FCP 6 and it installed and works perfectly but I won't be downloading any more apple updates unless I'm positive they don't contain any more "fixes" like this."
I have used FCP since version 1.x and have dutifully upgraded, except for the latest FCP Studio 3 upgrade. Listen, I need to use this program
Please Help!!
Process: Final Cut Pro [954]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 6.0.6 (6.0.6)
Build Info: FCPApp-905291121~12
Code Type: X86 (Native)
Parent Process: launchd [252]
Date/Time: 2010-03-24 15:07:47.142 -1000
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Interval Since Last Report: 276075 sec
Crashes Since Last Report: 26
Per-App Interval Since Last Report: 16682 sec
Per-App Crashes Since Last Report: 14
Anonymous UUID: 57EB6C25-3A43-4EA5-A100-3ED2EB88E9DC
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x00000000c58ade6e
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 ...lium.HDominantMotionTracker 0x3ba96fd2 0x3ba93000 + 16338
1 com.apple.Helium 0x03663a51 HFCreateInstance + 457
2 com.apple.SmoothCamFxPlug 0x036347bf getFrameProc(unsigned int, void*, char*, unsigned int) + 2283
3 ...uartzComposer.FxPlugWrapper 0x036e9c12 0x36e7000 + 11282
4 com.apple.QuartzComposer 0x986cfa44 +[GFNode(Private) newWithIdentifier:] + 105
5 com.apple.ProFX 0x00e451a6 -[PFXNodeManager nodeInstanceWithName:] + 74
6 com.apple.FinalCutPro 0x004f265c MakeEffectsDictForPatch(NSString*, KGFileRec*, long) + 234
7 com.apple.FinalCutPro 0x004f36f3 AddQCPatchAsEffect(NSString*, long) + 41
8 com.apple.FinalCutPro 0x004f3850 AddQCPatches() + 266
9 com.apple.FinalCutPro 0x004f39a8 RegisterQCEffects + 60
10 com.apple.FinalCutPro 0x001bbbb5 KGPlaybackLibAction + 2817
11 com.apple.FinalCutPro 0x0023398c CallLibs(KGLibActionCode, unsigned char) + 346
12 com.apple.FinalCutPro 0x00233b27 KGFinishLibraries + 115
13 com.apple.FinalCutPro 0x00233c58 KGInit() + 164
14 com.apple.FinalCutPro 0x003ff6bf OpenApplication(AEDesc const*, AEDesc*, long) + 75
15 com.apple.AE 0x96ee7f3a aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 166
16 com.apple.AE 0x96ee7e39 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 43
17 com.apple.AE 0x96ee7d46 aeProcessAppleEvent + 197
18 com.apple.HIToolbox 0x91ba42a1 AEProcessAppleEvent + 50
19 com.apple.HIToolbox 0x91d24ddc AEProcessEvent + 160
20 com.apple.HIToolbox 0x91c365b6 HIStdAppHandler::HandleEvent(OpaqueEventHandlerCallRef*, TCarbonEvent&) + 206
21 com.apple.HIToolbox 0x91c376a4 TEventHandler::EventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 64
22 com.apple.HIToolbox 0x91b6fe29 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1567
23 com.apple.HIToolbox 0x91b6f0f0 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 411
24 com.apple.HIToolbox 0x91b6ef4f SendEventToEventTargetWithOptions + 58
25 com.apple.HIToolbox 0x91ba3b2c ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 3006
26 com.apple.HIToolbox 0x91b7027a DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2672
27 com.apple.HIToolbox 0x91b6f0f0 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 411
28 com.apple.HIToolbox 0x91b91981 SendEventToEventTarget + 52
29 com.apple.HIToolbox 0x91d1a81b ToolboxEventDispatcher + 86
30 com.apple.HIToolbox 0x91d1a953 RunApplicationEventLoop + 243
31 com.apple.FinalCutPro 0x0014cece KGMainEvent(void*) + 46
32 com.apple.FinalCutPro 0x002aae53 main + 59
33 com.apple.FinalCutPro 0x00003122 _start + 216
34 com.apple.FinalCutPro 0x00003049 start + 41
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x98c830ea kevent + 10
1 libSystem.B.dylib 0x98c83804 dispatch_mgrinvoke + 215
2 libSystem.B.dylib 0x98c82cc3 dispatch_queueinvoke + 163
3 libSystem.B.dylib 0x98c82a68 dispatch_workerthread2 + 234
4 libSystem.B.dylib 0x98c824f1 pthreadwqthread + 390
5 libSystem.B.dylib 0x98c82336 start_wqthread + 30
Thread 2:
0 libSystem.B.dylib 0x98c7b856 select$DARWIN_EXTSN + 10
1 com.apple.CoreFoundation 0x93d2dddd __CFSocketManager + 1085
2 libSystem.B.dylib 0x98c89fbd pthreadstart + 345
3 libSystem.B.dylib 0x98c89e42 thread_start + 34
Thread 3:
0 libSystem.B.dylib 0x98c5c922 semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x98c8a45c pthread_condwait + 1089
2 libSystem.B.dylib 0x98cd3503 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004152e8 DisplayQueue::Run() + 702
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x98c89fbd pthreadstart + 345
7 libSystem.B.dylib 0x98c89e42 thread_start + 34
Thread 4:
0 libSystem.B.dylib 0x98c5c922 semaphorewait_signaltrap + 10
1 libSystem.B.dylib 0x98c8a45c pthread_condwait + 1089
2 libSystem.B.dylib 0x98cd3503 pthreadcondwait + 48
3 com.apple.FinalCutPro 0x004292ad Synchronizable::Wait() + 47
4 com.apple.FinalCutPro 0x004cc3e3 WorkUnitPerformer::Run() + 55
5 com.apple.FinalCutPro 0x00453544 Thread::RunHelper(void*) + 20
6 libSystem.B.dylib 0x98c89fbd pthreadstart + 345
7 libSystem.B.dylib 0x98c89e42 thread_start + 34
Thread 5:
0 libSystem.B.dylib 0x98c82182 _workqkernreturn + 10
1 libSystem.B.dylib 0x98c82718 pthreadwqthread + 941
2 libSystem.B.dylib 0x98c82336 start_wqthread + 30
Thread 6:
0 libSystem.B.dylib 0x98c5c8da machmsgtrap + 10
1 libSystem.B.dylib 0x98c5d047 mach_msg + 68
2 com.apple.CoreFoundation 0x93cee77f __CFRunLoopRun + 2079
3 com.apple.CoreFoundation 0x93ced864 CFRunLoopRunSpecific + 452
4 com.apple.CoreFoundation 0x93cf37a4 CFRunLoopRun + 84
5 com.apple.DVCPROHDMuxer 0x0ff4398f AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*) + 317
6 libSystem.B.dylib 0x98c89fbd pthreadstart + 345
7 libSystem.B.dylib 0x98c89e42 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x03663896 ebx: 0x3ba96b7b ecx: 0x01071730 edx: 0x00000001
edi: 0x3c8ace70 esi: 0x0000008e ebp: 0xbfffe488 esp: 0xbfffe470
ss: 0x0000001f efl: 0x00010286 eip: 0x3ba96fd2 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0xc58ade6e
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.8
Bluetooth: Version 2.2.4f3, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
PCI Card: sppciexpresscardname, sppci_othermassstorage, PCI Slot 3
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: WDC WD3200BEKT-00F3T0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 1
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Hub, 0x05ac (Apple Inc.), 0x911f, 0xfd100000
USB Device: EDIROL UA-25, 0x0582 (Roland Corporation), 0x0074, 0xfd110000
USB Device: Macally iKey, 0x2222, 0x0200, 0xfd120000
USB Device: USB RECEIVER, 0x046d (Logitech Inc.), 0xc50e, 0xfd123000
USB Device: Macally iKey, 0x2222, 0x0003, 0xfd121000
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x921e, 0xfd130000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfa200000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfa230000
USB Device: USB2.0 MFP(Hi-Speed), 0x04b8 (Seiko Epson Corp.), 0x0838, 0xfa231000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
FireWire Device: iSight, Apple Computer, Inc., Up to 200 Mb/sec
FireWire Device: unknown_device, Unknown

Shane,
Thanks!! I am aware of that software, after today. I will look into it. Is it through the FCS Maintenance Pack that I will have the ability to disable the offending plugin?
That is a bummer that it is that plugin as I wind up using that a lot for footage that is submitted by certain "monkeys" to the projects I work on. I actually call it the "Monkey Cam" filter.
In any case, I appreciate your help here. I removed the plugin from its folder and tries to open FCP and ...it crashed again. So it might be another plugin?
There was a lot more to the crash results, as I have a lot of plugins, but the board would not let me post such a long post. Would you be open to me adding this and running that too? I am not sure I want to drop the $130 or so on FCS Maintenance, and am kind of tossing around upgrading to FCS3 instead - in hopes that will fix the issue?
Let me know and I will post the remaining code. Mahalo.

My Final Cut pro x will not let me do 1 frame stills

I am working with a Time lapse and final cut x will not let me make the duration any shorter than 2 seconds. How do I over ride?

The selection duration can be made very small, but of course it's very difficult to deal with a one frame selection. Usually the best thing is to convert the image sequence to video before bringing it into FCP, or you can put all the items in the timeline, select them, and set the duration to one or two frames.

Final Cut Pro X will not export my project - error 1

Hello everyone,
So Final Cut is giving me a hard time. I have a project about 15mins long that I would like to export as a master file and it just doesn't want to work. When I first finished and tried to export, I was using verison 10.0.8. I would select master file for the export and it would just sit there, stuck on 0%. I then realized that I needed to update. I updated to 10.0.9 and tried to do the same thing again - no luck. Next, I closed final cut and trashed preferences. I then opened up and tried exporting again, same thing happened, stuck on 0%. Then I closed again and trashed preferences again. I opened final cut, turned off background rendering, and trashed project render files and event render files (as was suggested in another discussion for export problems). After doing that, I again tried to export - still nothing. At this point of course, I had trashed the render files, so I figured I should just let the project render again. I turned background rendering back on and opened my project - now it would not render! It was stuck on 0%! Okay so I closed and reopened again. I first tried to copy my whole project into a new project and try letting it render that way - nope, didn't work. So I closed and opened again. I turned off background rendering and started a new project. I pasted just a section of my video into the new project and manually rendered that section, which worked. So I pasted the rest of the video (in chunks) into the new project, manually rendering chunk by chunk. Finally I had my whole project again, and the whole thing was rendered. I tried exporting again and got the error 1 message, "The operation could not be completed because an error occurred when creating frame 373 (error -1).". This is my current state of affairs, and its driving me crazy. I just want to export my project!
Please help....Thanks

Thank you. I found it now. This is a location where I did not expect this. I tried to do this using the GUI elements controlling how clips are displayed in the time line. I also was looking for a context menu item on the clip. I did not expect it in the preferences.

Final Cut X suddenly will not take my youtube credentials

I've been using Final Cut X to upload directly to Youtube for many months.
Suddenly today, it will not take my YouTube credentials on ANY of my 3 YouTube accounts...
It just gives me an "Invalid Account Name or Password" every single time.
I'm still able to upload to my vimeo account. Anyone else experiencing this? It happened out of nowhere. I upload 2-3 videos a day. None of my passwords have changed.

Hi, I am having this trouble now with FCP X not accepting my YouTube details. I can get to the
GOOGLE account settings, select SECURITY, but I cannot then find CONNECTED APPLICATIONS AND SITES.
so I can't then click REVIEW PERMISSIONS
Please help
Thank you

Final Cut Server Metadata will not transfer to FCP

Hello,
I am new to Final Cut Server and am encountering a couple of issues. A big one is that the metadata from quicktime clips stored into final cut server will not transfer when I put these same clips from the server into FCP.
Any idea why? The metadata is with each asset in the server but won't transfer when the clips are transferred into FCP.
Any suggestion would be great!
Thanks.

FCP only supports specific types of metadata. What specific metadata fields are you looking to export with the clip? Also, "how" are you getting these clips from FCSvr to FCP?

Final Cut Express 4 will not launch on my Mac

I have a mac OS X 10.5.8 and I have bought final cut express 4 but it will not launch on the computer. Please help.

There are solutions on this forum, search "Final Cut Express won't open," for some of them. Updating to FCE 4.01 is one solution. For HD it is another.

Firefox Application will not start unless in PC Safe Mode

== Issue
==
I have another kind of problem with Firefox
== Description
==
A couple of days ago after seemingly working fine the day before Firefox suddenly decided to stop working. I seem to recall updating both my Adobe Flash and my Java on that day, and I'm also not 100% sure that I didn't change my Overclock settings too (but I think I did that and Firefox was still working)
Basically if I "start" Firefox from any location be it shortcut, direct executable or otherwise the application does not "run" I get the process but that is all. I have tried renaming to various combinations but still nothing appears to have any effect. Using the -profilemanager suffix in my shortcut / startmenu search and creating and using a new Profile has no effect either as does deletion, and Firefox Safe Mode shows the settings window but after choosing to open in safe mode nothing happens and I am left with the Firefox process hanging there doing nothing. I have tried multiple compatibility and administrator run settings but no effect.
I have uninstalled, reinstalled. Done full cleans deleting everything to do with Firefox and its Profiles. Uninstalled Flash and Java, and then Reinstalling FF. I have scoured the registy deleting anything obviously connected to Firefox, Mozilla and even Java to no effect (I have not cleaned out for Flash due to having multiple Adobe apps which I would prefer not to screw up.) I have downgraded from 3.6.3 to 3.6.2 and as far as 3.5.1 and then doing upgrade to the new 3.6.4. All with the help of my CCleaner to tie off any loose ends, but nothing seems to work. Can't restore pc to earlier date as I only remembered about it after I had already made too many changes.
The only time I can manage to run Firefox properly at all is when I am in Windows Safe Mode, I am sick of Google Chrome as it feels really slow and I also dislike Safari, Opera and Internet Explorer. I really do not know what else to do and would really appreciate some help so that I may use the only good browser that I have found again.
== This happened
==
Every time Firefox opened
== 5~ Days ago? Unsure
==
== Troubleshooting information
==
C/P from Safe Mode Windows
Application Basics
Name
Firefox
Version
3.6.4
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Modified Preferences
Name
Value
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.4
extensions.lastAppVersion
3.6.4
network.cookie.prefsMigrated
true
privacy.sanitize.migrateFx3Prefs
true
== Firefox version
==
3.6.3/3.6.4
== Operating system
==
Windows 7x64
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4
== Plugins installed
==
N/A

Firefox will only open in safe mode and other issues in Firefox 3.6.8
Rig / Set-up:
Win 7 (U.S.) / Ultimate 32bit
• P.O.S. Internet Explorer not installed…
• Firefox Default Browser
This Event:
1. Firefox will immediately close after opening 2 blank (Untitled) tabs and /or 2 (Untitled) windows.
2. Firefox will not open a 2nd time.
3. Firefox will only open in Safe-mode (.exe))
4. Firefox excruciating slow Start-Up
5. Firefox web –surfing unbearably slow
6. Firefox unpleasant web page hanging behavior
7. Firefox awful flash content behavior / Obnoxious Adobe Flash Player has always been and will always be crap.
The Cause:
Session Manager = Corruption …!!!
o This issue was created by faulty and inconsistent and flawed M$ Win 7 legacy software support for Hardware.
 The Keyboard / Hardware would generate a separate session manager event with the action/Web key.
 Firefox and/or TabMixPlus session manger were corrupted in the event process.
The Source:
A: Microsoft Windows 7 Ultimate32-US Version = substandard legacy device handling :
B: Hardware/Keyboard (shortcut) Customization Software Conflicts causing Corruptions of Firefox-Session Manger.
The Fix..!!!
I. Remove from Add and Remove Programs (Win7) Hardware/Keyboard Software “only”. ..Special note: Win 7 Updated- Hardware/Keyboard Device driver does not have to be removed...!!
II. Clean and remove all Instances of Keyboard software.
a. The “Best-est and Safest” Registry Cleaner is jv16 2010 Power Tools.
b. Restart Computer.
III. “If” available install an older version of your “Hardware/keyboard software” compatible with Win 7 that will allow some customization of Hardware/Keyboard-keys.
Confirm fix by:
1. Restart Firefox from Hardware/Keyboard key (shortcut).
2. Clean-up Internet crap and corrupted session managers...
3. Test Launch keyboard shortcut of Firefox.exe [“after” a clean-up of all internet crap]…
4. Test launch keyboard shortcut again / use Firefox extensively or normal use for any recurring bad web behavior.
If Corruption events occur again:
i. Use different and / or Older Keyboard “software” with win 7.
ii. Or you will have to wait for a Win 7 Hardware/Keyboard software update for keyboard installed.
Note:
“Do not use the hardware or keyboard shortcut-key for Web Browsing… Or else: // This Event (See Above): …Will Continue..!!!..”
And it is “not” a Firefox 3.6.8 issue.
So, look elsewhere.
Look @ the main culprits:
a. Substandard legacy device handling: Micro$oft Windows Operating System in combination / with.
b. Customization Software for your keyboard or other hardware that generates web functions and web sessions. / Hardware driver may not be the problem.
Add-on:
Flash Switcher Win / 1.0.2_
DownThemAll! / 1.1.10__
Personal Menu / 4.3.2__
Tab Mix Plus / 0.3.8.4__
Theme Font Size Changer / 0.2_
MR Tech Toolkit / 6.0.4__
Menu Editor / 1.2.6
It is with hope that this solution may help someone.?
Happy Foxing..!!!

Final Cut Pro X will not let me buy it saying I don't have the right video card?

Get this message but not advice on what I need to get, "Your computer’s video card does not meet the minimum system requirements."
I have a Mac Pro 2008, with all the memory it can handle and it says under graphics: Graphics ATI Radeon HD 2600 XT 256 MB
Any advice?
Thanks!

This is the list fo supported graphics cards:
NVIDIA
GeForce 320M
GeForce GT 330M
GeForce 9400M
GeForce 9600M GT
GeForce 8600M GT 128MB (Note: OpenCL compatible, but does not meet system requirements for Final Cut Pro X, Motion 5 and Compressor 4.)
GeForce 8600M GT 256MB
GeForce 8600M GT 512MB
GeForce GT 120
GeForce GT 130
GeForce GTX 285
GeForce 8800 GT
GeForce 8800 GS
Quadro FX 4800
Quadro FX5600
ATI
Radeon HD 4670
Radeon HD 4850
Radeon HD 4870
Radeon HD 5670
Radeon HD 5750
Radeon HD 5770
Radeon HD 5870
AMD
Radeon HD 6750M
Radeon HD 6630M
Radeon HD 6770M
Radeon HD 6970M

Final Cut Pro X will not open: Asking to "restore windows"???

Hey guys,
I have restarted, updated and done everything I can to get Final Cut Pro X (10.0.1) to open and I keep getting this alert >>> PHOTOBUCKET. I have done nothing new to my hardware or software (other than apples updates) since installing it a month ago from the app store.
The alert keeps asking me to either "Don't Restore Windows" or to "Restore Windows" and I clicked on both numerous times and I still get the "Final Cut Pro quit unexpectedly" alert which looks like this >>> PHOTOBUCKET after about 10 seconds of selecting either option.
Any ideas? -Joe

Have you tried trashing your preferences?
Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
With Preference Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
If you trash them and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then if they get corrupted you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
Can't guarantee it, but it's worth a try.
Andy

For about a week now, Firefox will not start unless I re-install it, then it works for about a day and does the same thing. I have gone through all of the fixes

I am on the current Firefox version. I am running Windows 7 Professional with all current updates, and I run McAfee. As stated, I have tried all of the possible fixes your site discusses and have made sure McAfee is setup to allow Firefox full access. I am not sure what to do. Doing a reinstall fixes it for 12 to 24 hours. There is no message, just does not start and there does not seem to be a process running.

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Final cut studio 3 will not start unless connected to my old mac

Similar Messages

Maybe you are looking for