Final Cut Studio Anamorphic error

When capturing SD data from DVDVCPRO tapes my system displays clip in viewer in horizontally distorted anamorphic format.
I've been using the same [recommended] Panasonic deck {AG-DV2500] with no problem for for five years on this show, no problems. Clip looks normal during capture but after capture, open clip in viewer and it's stretched anamorphic. The Anamorphic box is not checked in Settings but somehow, somewhere, the system checks the "Anamorphic" column during capture. I click on the check and the clip goes back to normal but it's one swift pain to scroll over to the properties and do this extra maneuver for every clip.
This problem only cropped up a month ago after producers added 1080p HD video to the show and I had to upgrade OSX from Tiger to Leopard 10.5.8 and upgraded FCP to Final Cut Studio 7 [in mid-production, always a no-no, but...] and using 1440X1080 HD format as a Timeline setting.
Apple support has not been able to figure this one out yet.
???

and using 1440X1080 HD format as a Timeline setting....
1440x1080 is a non-square pixel Anamorphic format -it displays as 1920x1080 in square pixels.

Similar Messages

  • Final Cut Studio 2-Error Installing

    Hi,
    I insert the Disk and after a minute I get the following message:
    "There were errors installing the software"
    Previously I had FInal Cut Express which was removed. I noticed instead of an install I am getting an "upgrade" when installing?
    Any advice?
    Thanks
    I am running QuickTime Player_7.5.5

    Which version of Final Cut Studio did you purchase ... the full retail version or an upgrade version?
    -DH

  • Errors During Instalation Of Final Cut Studio 5.1

    Aloha,
    I am having some trouble here!! I am trying to install FCP Studio Pro 5.1 on my mac. I tried to do an upgrade from FCP 4.5 HD on my orriginal Hard drive. The instalation went through its paces & asked me to put in the second disc. I did then it came back with an anoucment that there were errors during instalation & to try again I did & was never able to get it to instal... Getting frustrated I ran diskworior on the drive & tried again no luck... after some time I thought it might be the drive would not let me because there was an earlier version on there.... so any way after some other problems with this drive I decided to completely erase & instal Mac OSX on my second hard drive that has never had anything on it. I made this my new startup disk & upgraded the OS to OS 10.4.9 I then Tried to install FCP Studio Pro 5.1 on this drive.. this time It never got to ask me to put in another disk it came back with the same error during instalation try again!!!!!! So now I am getting ******!! but odly enough Final cut studio shows up in my aplications. When I click on it it gives me a warning that there was an error registering & once I click ok it seems to launch FCP 5.1....... ?? So is it really there or not??? & why is it not installing the other 4 discs??? and to add insult to this I have tried to install iLife 06 & I get the same error!!!! WHY!!!!!!!!!
    Another thing.. I installed FCP Studio Pro 5.1 on another Identical computer down the street & it installed no problem!!!!
    Can anyone help Please!!!!!!

    I would take a different approach.
    I would backup the old drive files to an external, and then do a clean wipe and new install of OS, updates and the FCS.
    Best way to do it, in my view.

  • Final cut studio pro 6 install problems and error message

    Purchased a new macbook and am having trouble installing Final Cut Studio Pro 6- get this error message: You can't open the appliction FinalCutStudio.mpkg because PowerPC applications are no longer supported  - have never seen this before, any clues?

    The installer requires Rosetta to be present, but Lion doesn't include it anymore. You can try to install Rosetta from a Snow Leopard disc using the "Optional Installs". Note that this is not officially supported: http://support.apple.com/kb/HT4769
    There have also been reports that Lion will break most plugins for FCS 2 and FCS 3.

  • Quicktime error in Final Cut Studio II

    Hello everybody,
    since yesterday I am figthing with the following problem in Final Cut Studio II.
    First I wanted to export my subtitles through the XML Export in Final Cut Pro 7.0.3 but this did not work out, as it looks like the stack had an overflow and it says: "XML translation was aborted due to a critical error".
    As I tested, some smaller projects are possible to export XML but not my main project.
    I looked for different fixes as the system and the projects worked some days before.
    Then I checked if I can Export the Sequences with compressor as I allways did and I get an error "Failed: QuickTime Error -50" after some processing time!
    This is the content that is getting logged by the Console:
    9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=1097728) failed (error code=12)
    9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
    9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
    9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=1097728) failed (error code=12)
    9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
    9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=2097152) failed (error code=12)
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=2097152) failed (error code=12)
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=2097152) failed (error code=12)
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=2097152) failed (error code=12)
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
    9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
    9/4/11 3:37:35.367 AMcom.apple.launchd.peruser.503: ([0x0-0x56056].com.apple.FinalCutPro[2717]) Jobappears to have crashed: Bus error: 10
    9/4/11 3:37:36.611 AMReportCrash: Saved crash report for Final Cut Pro[2717] version 7.0.3 (7.0.3)to /Users/Christian/Library/Logs/DiagnosticReports/Final CutPro_2011-09-04-033736_papamac.crash
    9/4/11 3:41:26.188 AMFinal Cut Pro: CFURLCreateWithString was passed this invalid URL string:'/System/Library/PrivateFrameworks/vmutils.framework' (a file system pathinstead of an URL string). The URL created will not work with most file URLfunctions. CFURLCreateWithFileSystemPath orCFURLCreateWithFileSystemPathRelativeToBase should be used instead.
    9/4/11 3:41:30.100 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class libCompressorKit isimplemented in both /Applications/Final CutPro.app/Contents/MacOS/Plugins/Transcoder.bundle/Contents/MacOS/Transcoder and/Library/Application Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Ozone.One of the two will be used. Which one is undefined.
    9/4/11 3:41:30.100 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class objCWrapper isimplemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final CutPro and /Library/ApplicationSupport/ProApps/SharedA/Frameworks/Motion/Ozone.framework/O zone. One of the twowill be used. Which one is undefined.
    9/4/11 3:41:30.100 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class LicenseObject isimplemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final CutPro and /Library/ApplicationSupport/ProApps/SharedA/Frameworks/Motion/Ozone.framework/O zone. One of the twowill be used. Which one is undefined.
    9/4/11 3:41:30.777 AMimagent: [Warning] Tried to add listener: com.apple.FinalCutPro but we're notwaiting for it
    9/4/11 3:41:30.953 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class ImageSequenceMedia isimplemented in both /Library/Application Support/ProApps/Bundles/Soundtrack ProIntegration.bundle/Contents/MacOS/Soundtrack Pro Integration and/Library/Frameworks/AECore.framework/Versions/A/AECore. One of the two will beused. Which one is undefined.
    9/4/11 3:41:30.953 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class MotionDocumentInfo isimplemented in both /Library/Application Support/ProApps/Bundles/Soundtrack ProIntegration.bundle/Contents/MacOS/Soundtrack Pro Integration and/Library/Frameworks/AECore.framework/Versions/A/AECore. One of the two will beused. Which one is undefined.
    9/4/11 3:41:30.953 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class OZTimeMarker isimplemented in both /Library/Application Support/ProApps/Bundles/Soundtrack ProIntegration.bundle/Contents/MacOS/Soundtrack Pro Integration and/Library/Frameworks/AECore.framework/Versions/A/AECore. One of the two will beused. Which one is undefined.
    9/4/11 3:41:30.953 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class LicenseObject is implementedin both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and/Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/SwampTypes.frame work/Versions/A/SwampTypes.One of the two will be used. Which one is undefined.
    9/4/11 3:41:31.014 AMimagent: [Warning] Tried to add listener: com.apple.FinalCutPro but we're notwaiting for it
    Thank you for any help on this issue!
    By the way, after seening this issue for some time in OS X 10.6.8 I upgraded to 10.7.1 and it did not change anything to the situation.
    To me it looks like a plugin conflict but deleting of Caches and .plist's did not change anything to the situation!
    Please help!!!
    Best Regards,
    Chris

    After some peacefull time my system crashed completely on Friday!
    I installed all from Scratch to make sure its not some old stuff that I carried on during migration.
    It's not a problem with the motion files as I deleted all of them and XML export is still crashing!
    The situation is, that after installing it all I got the same quicktime translation error again and I am quite angry about how Apple handles clients who are working on projects with the recent FCP story.
    Unfortunately due to the problems in exporting XML I am not even able to switch to Adobe Premier as this is the only way to import there.
    After a lot of testing I am quite sure, that this issue has to do something with an Apple Update release between June 2011 and now.
    Conclusion: Final Cut Studio II is not working correctly anymore as it did before June 2011!!! Apple, Please fix this issue asap.!!!!

  • My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

    My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

    I had this problem about 2 months ago and, as others have suggested in this thread, eventually traed it backed to some stills I had scanned and brought into the project.  Accidentally I had changed the scanner settings, with the result that a couple of skills were well beyond 1980 x 1020 pixels.  I resampled the stills and everything was fine again.  Hope this might help.

  • License Error on Final Cut Studio install

    We just purchased Final Cut Studio 5.11 from the Mall of America Apple Store. After entering the serial number for Final Cut Studio, the Install screen moves on to the installation type, but gives me the following error,
    "Licensing Error: The license file will not be written to disk because the user does not have enough privileges"
    I have one account on this machine, which is the Administrator account, I am logged into it during installation, I even have a done a few things that made it ask me for my password, and this still comes up.
    After encountering that error, i was still able to install the software, but none of the programs will run, each asking for name/company/serial, then telling me the liscense file is not found.
    Help!
    thank you!
    Ross Hendrickson

    I can't seem to find the license file, i've looked under library, and application support.
    I have checked on my permissions, and I have read&write permissions to my home folder, applications, system, and both library folders.
    In the Final Cut forum it said people were having problems with upgrading. I had an old version of FCP that I thought I had deleted, but maybe that is causing problems? Should I somehow uninstall all FCS/FCP info and start over?
    thanks!
    -Ross

  • Anamorphic Setup - Final Cut Studio Training

    I inadvertedly posted this in the DVD SP forum. I'd like to move it here where it belongs.
    I just got my Final Cut Pro Studio a couple weeks ago, had to finish a project that I was doing in FCE and iDVD, and am now reviewing the tutorial on the Final Cut Studio Training DVD.
    One of the first steps is to setup the session to "DV-NTSC Anamorphic". Since I had already blown past that 2 week ago, I did not see it this time, nor could I find the correct menu to make that setting for the tutorial. So I just blew by it; realizing that I'd find out sooner or later what the cost would be.
    I found out: When doing the Motion segment and importing the final "TrailerLowerThirds" back into FCP, that part is compressed horizontally with black side bars on the right and left.
    3 questions:
    How do I make that setting if I've been running FCP already?
    What does that do to the project, the clips, anything else?
    If I were to make this mistake on one of my projects, how would I recover?
    So far I've only been making projects in DV-NTSC 2:3 (I guess that's the right way to say it). Any insights would be appreciated.
    G5 dual core 2Ghz, 2.5 GB, 160, 300GB & 300GBfw   Mac OS X (10.4.6)   FCE HD, FCSP5.1

    My second question was: "What does that do to the project, the clips, anything else?"
    The essential thing to bear in mind is that 4:3 and 16:9 anamorphic projects (in the SD world) have the SAME resolution: 720x480 pixels for NTSC, 720x576 for PAL. Because the resolution is the same, but the apparent frame size is different, it can lead to confustion, and it's easy to get it wrong - especially over there in the US where anamorphic broadcasting of SD material never took off, and thus widescreen sets were never mass market before HD.
    (The situation here in Europe is different.).
    Have a read of this for clarity: http://www.helerab.fi/widescreen/
    The anamoprhic easy setup just tells FCP that you are capturing anamorphic material, and that new sequences should be anamorphic by default. You can override these defaults if necessary, but the easy setup just makes it harder to mess up.
    The important thing when going to DVD is to keep the workflow anamorphic all the way through: output anamorphic material from FCP, make sure material is transcoded to mpeg (whether through compressor, iDVD or Quicktime) with anamorphic settings intact; and in your DVD authoring application, make sure projects, menus and tracks are created or flagged as 16:9.
    The end result is an anamorphic DVD.
    Your DVD player has a menu where you tell it what type of TV it's connected to - whether 4:3 or widescreen (and if it's a 4:3 set, how it should handle widescreen material: either letterboxing it or "cropping" it via pan/scan).
    I've started noticing in other posts that some people think that if you have anamorphic material you should set your DVD player to 16:9. This is NOT A GOOD IDEA (unless the DVD player is attached to a widescreen TV, in which case you have it set to 16:9 already!) Just set the DVD player once and leave it alone.
    Hope these observations help get you started. If you understand what's going on with anamorphic media, you're less likely to make mistakes. Best of luck.

  • Error installing Final Cut Studio and iLife on Leopard

    When I upgraded to Leopard, I decided to entirely wipe my boot drive since I was experiencing problems with certain applications (ie: Final Cut Pro) in Tiger. Therefore I've been re-installing all of my applications in Leopard. I've been having some problems though, when I try to install Final Cut Studio, I get this message after a while of it trying to install the Apple Soundtrack Pro loops disc:
    http://salsunproductions.com/misc/fcsinstallproblem.jpg
    I also get a similar error when trying to install iLife 06.
    The strange thing is that I am able to run the Applications fine with the exception that all my Final Cut Studio applications don't remember their serial number and my name/organization. I get this message every time I boot up a Final Cut Studio Application (this is the original Final Cut Studio, PPC)
    http://salsunproductions.com/misc/fcssnbootup.jpg
    Message was edited by: salilsundresh

    As for the registration problem:
    http://discussions.apple.com/thread.jspa?messageID=4582284&#4582284
    As for the disc install, if you're sure you're disc isn't just scratched, then I guess there's nothing to do but wait for 10.5.1 and see what happens.

  • Error messages I when install final cut studio on my Macbook Pro

    Why am I getting error messages, I when install final cut studio on my Macbook Pro?  The Mac book Pro is a 2.5 ghz 17'.  The software; FC Studio is about a year old.
    Boe

    What error message(s) are you getting?
    Also, if you don't get an answer here, you might post in the FCS discussion.

  • Why Can't I Install Final Cut Studio?

    I have a MacBook Pro which is about 12 months old. It has a 2.66GHz Intel Core i7 Processor and 8G of RAM. I have been trying to install Final Cut Studio 5.1. Yeah I know that is an OLLLLLLLLLLLD version. Why I chose not to update is neither here nor there. I was about to update when Final Cut Pro X was realeaded and FCS vanished into the ether. I really only wanted DVD Pro but when that wouldn't install I went back to Square 1.
    The specificationa as stated are:- "These discs contain the files required to install Final Cut Studio 5.1 on either PPC or Intel based Mac computers."
    The error message that shows up on the screen when I click on the install package is:- "You can't open the application Final Cut Studio pro.mpkg because Power PC applucations are no longer supported."
    This is despite the stated specifications and the fact that there is a Universal Icon on the discs.
    I am also having a simillar but not the same problem with iLife '06 but i'll start another thread on that.
    I'm confused, thanks for your help in advance.

    Your problem is you are running Lion as your OS (10.7) and Lion does not support Rosetta which is required to run the INSTALLER of FCS 2. If you were running Snow Leopard, you would have been able to do the install.
    MtD

  • Final Cut Studio license invalid after upgrading to Leopard?

    Hello,
    After upgrading to Leopard 10.5.1, Final Cut Studio v5.1.4 and its companion apps like DVD Studio 4 do not recognize my FC Studio License as valid. I input the license key and it says:
    "Licensing Error
    This application cannot continue because the licensing data is corrupt."
    I am a licensed user via the FC Studio Crossgrade since 2006 and all has been fine with Tiger before Leopard.
    I have used Disk Utility to "repair permissions". I have removed the FC files from the Preferences folder to give it a clean start.
    PERHAPS A HINT?:
    So I tried to re-install FC Studio 5.1 from the FC Install DVD and I get this message after inputting the key:
    "Alert
    Licensing Error: The license file will not be written to disk because the user does not have enough privileges."
    I have Administrator privileges on this account and I even tried to install it as 'root' and the same error occurs.
    Is there a file that I need to change permissions on?
    THANKS for any help here! And happy holidays.
    Bonafide

    Hi,
    Unfortunately there is also an issue with installing FCS2 on a brand new installation with Leopard and this licensing error.
    "Alert Licensing Error: The license file will not be written to disk because the user does not have enough privileges."
    This also occurs, apparently, that if you are logged in with an Active Directory user with Admin privileges it still will not let you install the product keys.
    This is much the same as a problem with Adobe CS3 products, only the updates work when you are logged in with a local admin - not an Active Directory Admin.
    Both these problems are really really annoying for those on corporate networks - such as myself.
    For my problem, I had to log out as my AD account, login as a local admin and then install the software. .
    KJ

  • "Motion 4" icon greyed out after upgrading to Yosemite - Did Yosemite break "Motion 4" in Final Cut Studio?

    Against my better judgement (now that Apple has turned into Microsoft 10 years ago, breaking apps with every OS update, followed by radio silence from Apple, pretending like they didn't do anything), I just upgraded from Mountain Lion to Yosemite and noticed that my Motion 4 icon is now greyed out. Thanks Apple.
    I still do the majority of my work in Final Cut Pro 7, with many, many, Motion 4 projects embedded in the timeline (so that I can change them in Motion and have them seamlessly updated in my Final Cut Pro project), including an unfinished feature length documentary on gay and lesbian history from 2000 BC until 1900 AD. Should I just throw the entire film into the rubbish bin? I would presume that Motion 5.1.2 is incompatible with Final Cut 7? So what am I supposed to do now?
    1 - Downgrade to Mountain Lion (or heck, why not Snow Leopard?)?
    2 - Switch to Adobe Premiere?
    3 - All of the above?
    Thanks (for nothing, Apple).
    MacBook Pro 15" with Retina Display
    2.4 GHz Intel Core i7
    8 GB 1600 MHz DDR3
    NVIDIA GeForce GT 650M 1024 MB

    After some peacefull time my system crashed completely on Friday!
    I installed all from Scratch to make sure its not some old stuff that I carried on during migration.
    It's not a problem with the motion files as I deleted all of them and XML export is still crashing!
    The situation is, that after installing it all I got the same quicktime translation error again and I am quite angry about how Apple handles clients who are working on projects with the recent FCP story.
    Unfortunately due to the problems in exporting XML I am not even able to switch to Adobe Premier as this is the only way to import there.
    After a lot of testing I am quite sure, that this issue has to do something with an Apple Update release between June 2011 and now.
    Conclusion: Final Cut Studio II is not working correctly anymore as it did before June 2011!!! Apple, Please fix this issue asap.!!!!

  • Is it unlawful to sell my used final cut studio version 3 software?

    I had listed my software at eBay after deauthorizing it from my Mac Pro. Was I under a contract with Apple that prevented me from reselling the software?(I'm afraid I don't have time to read pages of fine print.) Here's the message I just received from eBay after the closed my auction:
    You recently listed the following listing:
    300791938347 - Apple Final Cut Studio Version 3 (Version 2 Retail plus Version 3 Upgrade)
    Your listing has been removed.
    Your item was removed because of a request we received from BSA (Business Software Alliance) (US), a member of our Verified Rights Owner Program (VeRO), asking us to remove the item for:
    - Software offered for sale is in violation of an enforceable license agreement, which constitutes a copyright infringement.
    If you have additional questions or concerns on why your item was removed, please contact BSA (Business Software Alliance) (US) directly at:
    [email protected]
    Please allow 7 days for BSA (Business Software Alliance) (US) to reply to you.
    All listing fees associated with the removed item(s) have been credited back to your account.
    The rights owner or an agent authorized to act on behalf of the rights owner, BSA (Business Software Alliance) (US), notified eBay that this listing violates intellectual property rights. When eBay receives a report of this type of violation, we remove the listing to comply with the law.
    Copyright infringement is unlawful and against eBay policies. Copyright is the protection provided by law to the authors of creative works, such as movies, music, software, photographs, and books, both published and unpublished. Copyright owners have the exclusive right to reproduce the copyrighted work, to distribute copies of the copyrighted work, and to perform or display the copyrighted work publicly.
    eBay doesn't allow the listing of unauthorized copies of copyrighted works. Unauthorized copies include backup, pirated, duplicated, or bootlegged copies.
    If the product you are selling is a copy of another work that you aren't authorized to copy, don't list the item. eBay doesn't allow the sale of software if this violates the manufacturer's copyright license. Some common types of software with license agreement restrictions include:
    -- Academic software: Software that is sold at discounted prices to students, faculty members, and educational institutions
    -- Beta software: Early copies of software that are distributed by software developers for evaluation, testing, and troubleshooting purposes
    -- Original Equipment Manufacturer (OEM) software: Software that is included with the purchase of new equipment such as a computer, digital camera, or printer
    You may need to obtain the manufacturer's consent to sell this software.
    For more information, please visit:
    http://pages.ebay.com/help/policies/replica-counterfeit.html
    You may need to take a tutorial. The next time you sell, you may be asked to take the tutorial, if it's required. Once you've completed the tutorial successfully, please review your account status for any other possible concerns. If there are no other issues, you should be able to sell again.
    To take the intellectual property tutorial, please visit:
    http://pages.ebay.com/help/tutorial/verotutorial/intro.html
    Please be aware that any additional violations of this policy may result in the suspension of your account. eBay understands that you may be concerned about this situation. We encourage you to contact BSA (Business Software Alliance) (US) directly if you have any questions.
    You can send an email to: [email protected]
    For more information on how eBay protects Intellectual Property, or for additional information if you believe that your listing has been removed as a result of an error or misidentification, please visit the following Help page:
    http://pages.ebay.com/help/policies/programs-vero-ov.html
    For more information on why eBay may remove a listing, please visit:
    http://pages.ebay.com/help/sell/questions/listing-ended.html
    Please be assured that your listings have not been targeted in any way. Although there may be similar items currently listed on eBay, we review all listings that are reported to us by eBay members or Verified Rights Owner (VeRO) program participants. We rely on reports from our members to help maintain the safety and security of our Community. We encourage you to report any items by using the REPORT THIS ITEM button on the listing so we can quickly remove any other items that should be removed.
    If you have additional questions, contact our policy experts. Get started by clicking the link below:
    http://contact.ebay.com/ws/eBayISAPI.dll?ContactCS&Query=1337&Domain=Homer_EOA&F rom=5265
    We appreciate your understanding.
    Thanks,
    eBay
    Please don't reply to this message. It was sent from an address that doesn't accept incoming email.
    H5265

    eBay heavily "overprotects" copyright owners.
    The BSA is hired by Apple to look out for copyright violations. They simply go after everything without any investigation. eBay plays along and so you are the one with the problem to do something completely lega.
    Here is the relevant section of FCS's SLA:
    3. Transfer. You may not rent, lease, lend, sell, redistribute or sublicense the Apple Software. You may, however, make a one-time permanent transfer of all of your license rights to the Apple Software to another party, provided that: (a) the transfer must include all of the Apple Software, including all its component parts, original media, printed materials and this License; (b) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or other storage device; and (c) the party receiving the Apple Software reads and agrees to accept the terms and conditions of this License. All components of the Apple Software are provided as part of a bundle and may not be separated from the bundle and distributed as standalone applications.
    This means that you are allowed to sell the package if you are the original owner of the software.

  • Final Cut Studio is crashing a lot using a Mac Pro (nehalem) 2009

    Greetings,
    I have a video workstation based on a Mac Pro (2x2.26GHz Quad-Core Intel Xeon Nehalem, 6 GB RAM, 640 GB HD, 512 NVIDEA VRAM) with a Blackmagic Decklink HD Extreme 2009 and an Highpoint RocketRAID 4322 card (properly connected to a RAID 5 array).
    I'm editing, with Final Cut Studio 3, a big TV project with some TGA and loads of HD XDCAM EX 35mbs video footage.
    *What is happening wrong?*
    Final Cut Pro is crashing to many times and dont let me work with the flow that is supposed. I start to work and i do a bit of scrubbing in the timeline and suddenly the rainbow spyral starts to spin and kaput! FCP just crashes.
    I've tried to many things. Re-installing everything from the baseline, plug out the 2 PCIe cards (and not even the drivers are installed). Even so FCP still crashes with the project.
    Funny thing is... This symptom only happens with the Nehalem Mac Pro. I have another station based on a Mac Pro 2x2.66 GHz Dual Core Xeon 3 GB RAM 2006 and when i run the project... everything works fine. FCP here doesn't crash.
    This is what makes me believe that the problem must be with the new Mac Pro.
    I have the reports generated by the FCP after the crash. You can find it here:
    http://www.ideiascompernas.com/reports/
    I'm getting frustrated because i've invested big in this workstation, safe in the knowledge that it was going to be stable to complete my requirements.
    Is there anything that i or Apple can do to resolve my problem. Is it the processor? Extended Hardware Test says that everything is ok.
    I'll be waiting,
    best regards, thanks,
    Pedro

    You may want to also post here:
    Final Cut Studio forum:
    http://discussions.apple.com/category.jspa?categoryID=123
    Content creation with Final Cut Studio
    http://discussions.apple.com/forum.jspa?forumID=1137
    I see you have the GT120, not a very nice card really but maybe it is 'enough.' I'd upgrade. To ATI Radeon 4870, once you get it stable and working.
    http://discussions.apple.com/thread.jspa?messageID=10251193&tstart=0
    I see your crash is kernel panic actually.
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
    Crashed Thread: 194
    Almost always that is memory related, are you seeing parity errors?
    Watch System Profile - Memory tab
    Replace the RAM (I'd even up it to more memory, 6 x 2GB is what I would have configured for)
    Have you tested your RAM? run Apple Hardware Test?
    Disabled ALL USB and Firewire devices?
    Is the RR4322 okay to run in slot #2 (16x) rather than in slot 3 or 4 (4x)?
    Getting RAM replaced, advanced exchange, or go out and getting some Kingston or Crucial etc for your system, and swapping, really is one good method, trial and error, to find the cultprit or rule out RAM.
    Errors like this can mean flushing your caches is a must, and possibly due to errors and crashes, clean system install, checking data (both time consuming) and being careful to recheck your drives with Disk Warrior and/or TechTool Pro 5 to insure there are not any corrupt files (not perfect either which is why restore the system from known good backup image can be a must).

Maybe you are looking for