Final Cut Studio Export method

I recently videod my nieces dance recital with a Sony HDR HC1 HiDef (1080i/30) and went through the editing process everything looks great within FCP. But when I export using compressor or quicktime conversion imx 525 60 or any of the mpeg flavors the output from DVD Studio looks like crap. I'm in a pinch with regards to time and really need some help with getting high quality output to DVD. I've spent more time exporting than the 30hrs i spent editing the 2hrs of video.
Thanks,

Actually, just to be pedantic, it's 720x480
New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Similar Messages

Is it possible to export Final Cut Pro X or .MOV to DVD Studio Pro (Final Cut Studio)?

Is it possible to export Final Cut Pro X projects or .MOV to DVD Studio Pro (from Final Cut Studio v.3)? I'm using the free trial of Final Cut Pro X and later acquired a copy of Final Cut Studio (FCP 7, Compressor 3.5, DVD Studio Pro 4, Color 1.5, Motion 4, Soundtrack Pro 2).
I don't like the default DVD export in FCPX, so I would like to do it on DVD Studio Pro. Is it possible to export the project or the final .MOV file to DVD Studio Pro?
Additionally, can I use unfinished FCPX projects on FCP7?
Is it possible to export from FCPX to Compressor 3.5 (Final Cut Studio)?
Feedback would be greatly appreciated. As of this post, I have about 13 days left on my FCPX trial. Or would it just make sense to just use Final Cut Pro 7, since I have a permanent copy of it?
Thank you.
P.S. Where would be the best place to store projects or any other file related to Final Cut Studio or Final Cut Pro X? My MacBook Pro has 320GB built in storage (only 60GB available), and I have a 1TB external hard drive.
What is best to store on the Macintosh internal hard drive?
What is best to store on the external hard drive?

Yes you can make DVDs in DVDSP using video exported from FCPX.
There are some apps that will translate between X and 7- that said I would highly recommend not going back and forth as the translations are not 1:1 perfect.
I would recommend storing all Events and Projects on the External drive.
Compressor 3.5 will not accept exports directly from FCPX- you'll need Compressor 4 which is $49.
Totally up to you whether you want to make the jump to X. 7 is an EOL'ed program, meaning there will not be another version of that application. Final Cut Pro X is the version being actively developed now.

Problems exporting HD timeline in older Final Cut Studio HD

I've been working on an older version of Final Cut Studio HD. I had originally offlined the footage so I could edit it, and I finished onlining the footage with the original HD footage. The aspect ratio of the project and the footage is 1920 x 1080, and the codec of most of the footage and the timeline was set to H.264. The only problem is, now that it's onlined, it refused to render any of the transitions. It gives me some kind of codec error. I have also tried exporting the timeline as a Quicktime Movie, but it always fails at somepoint in the process. I have tried exporting Quicktime Conversion, and it failed too. The only way I was able to get it to output was to change the codec of the timeline and in Quicktime Conversion, but this provided a subpar quality file. I understand that I'm using and older version of Final Cut Pro on an older system, but I'm trying to find work arounds to this issue that will allow me to output a quality full HD file. Any help is appreciated.

DVCPRO HD 1080i60
Choose it. Set your Field Dominance to None.
Gaaaah! That's what I get for trying to save myself some typing.
Now get on with it. Start editing

Final Cut Studio Crossgrade - Best method for upgrade?

Hi,
I've received my new Final Cut Studio crossgrade disks after surrendering my old ones to Apple and paying my £40 plus p&p (seems a bit antiquated doesn't it) and now I'm wondering how to go about installing.
I suppose ideally I would start again with a fresh OSX install and then install all the new Final Cut Studio apps on a 'clean' system. However, if I decide I am too lazy to do this (as fun as it sounds, my system is running fine otherwise so it would be a bit of a pain) is there a way of clearing off my old FCS apps cleanly, to allow me to install the new ones without any performance compromises / potential conflicts / unused files lying about on my system disk (or is this going to leave loads of hidden files that might cause crashes etc.?
I would appreciate advice from anyone who has tried their method and is certain it definitely works!
Cheers
Alan Smithee

You're right - a clean install would be better. BUT, few of us can afford the time or energy to rebuild all the apps folder, etc. Personally, I simply installed it directly on top of all existing apps, after making a system drive clone. Worked perfectly, I saw no problems after crossgrading.

Exporting scoring markers in Final Cut Studio and importing to Logic Pro

I want to export my scoring markers with the movie in Final Cut Studio and see them as markers in Logic Pro 7.2.x. I need to use the markers as "hit points" to calculate my tempos and effectively lay out my score based upon the action in the picture. I'm exporting the Final Cut Studio project to a Quicktime movie and choosing audio and video + "scoring markers". Thanks for your help.
TG

Don't bother rendering a movie out of LiveType, simply save the project file and import it into FCP.
LiveType outputs in the Animation codec only, so you will always have to render. Using the project file has another advantage -right clicking and choosing "Open in Editor" will drop you back into LiveType where you can quickly make adjustments, save and return to FCP with the changes in place.
To set project properties, you can use the Place Background Movie function in LiveType. Drop a short clip in and it will automatically adjust the properties to match. You can delete it once you have the settings. If you have Anamorphic video, you will still need to adjust the pixel aspect ratio -exact settings depend on the format, you haven't told us that yet.
Again, depending on the format, you might have to set the Anamorphic flag in FCP's Item Properties for the LiveType file.
When you view the FCP export in QuickTime Player 7 (not QuickTime Player X) make sure that the High Quality Playback preference is selected.
Typefaces in video:
Avoid using small, thin, delicate and Serif typefaces. They never work well.
A well known example of a Serif font is Times, which you should avoid at all costs in any case -it makes it look like you made the titles in MS Word. Stick with San Serifs with clear, bold strokes. Helvetica is a popular example of a San Serif.
If your titles are white, reduce the brightness to around 90%. Apply a shadow or border to distinguish them from the background. While it might sound counter productive, applying a tiny amount of blur can help too.
One more thing: Don't put your email address in the body of your post. The forums are open to anyone who wants to read them and by extension, web bots. They will harvest the address and bombard it with spam. We don't do personal email on the forums anyway -we share information amongst all users.

Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. Whne I try to export to it aI am told I must go to i-apps and buy compressor.

Hello- I have final cut pro X and final cut studio. Should Compressor 3.5.3 work with fcpX. When I try to export to it aI am told I must go to i-apps and buy compressor.

No, FCP X will only work with Compressor 4.

Export and burn - Final Cut Studio to DVD Studio Pro

I think I am doing all the right settings when I try and convert material that was filmed with an HDV camera into a suitable format for burning and playing on a traditional SD DVD recorder. But even with encodings of 720 x 576i PAL, the disc once burned is rejected by my DVD player, although it plays fine on the Macbook Pro I amusing for editing and burning. Am I missing something obvious? I looked for a standard MPEG -2 setting in the Quicktime Conversion window, but couldn't find one. I have the first version of Final Cut studio, which I think is really FCP v.5.1.
Thanks
Nick

It sounds as if you are choosing the HD DVD checkbox in DVD SP.
You shouldn't.

Every video put into Final Cut Pro exports in horrible quality regardless of format/settings.

Hello fellow Mac enthusiasts,
I'm having a problem which may or may not have been plaguing my studio since day one. Every video that we edit in Final Cut Pro exports in MUCH lower quality than it was when it was imported, not only that, the file size of the newly exported video is several times the size of the original. What I end up getting is a file too large for our clients to email around. We recently had a client come into our studio with a flash drive full of 15 second avi's no larger than 900 KB, he wanted a few of them edited together with simple cross fade transitions, and even a few seconds of dead space cut out. He needed them to be the highest quality possible for a powerpoint presentation he may now be unable to give. At first I exported them as Uncompressed avi's, best quality, thousands of colors, and no sound. The resulting file was not only blurrier, but now 260.5 MB!! And that one was with zero edits! The original was 803 KB and crystal clear. So after that I decided to try a few tests. We also produce a bi-weekly hour-long local television show, which looks fine on television but now I'm wondering how much better it could and should look. I've been exporting that out as a Quicktime, Apple ProRes 442 HQ, Interlaced bottom-field-first, zero filters, both compressor native and NTSC 720 X 480. I attempted this method on the client's original 803 KB with zero edits and not only did it export a completely unusable video compared to the original, but it was now 57.1 MB. What is going on here? Is Final Cut conspiring against me? I'm guessing it's something in my settings which I'll shamefully admit I know absolutely nothing about. Could anyone help a struggling video editor do his job?
Joey

Hey guys sorry it took me song long to respond it's been a busy week filled with many things not relating to final cut...
In response to David's post, the original file is indeed larger than 720X480, though it's dimensions are not available to see in the 'more info' associated with the file itself. By comparison, the apple pro res LT file I exported through final cut of the same avi file is 720X480, and looks significantly worse.
[URL=http://imageshack.us/photo/my-images/87/screenshotofavis.png/][IMG]http://img87.imageshack.us/img87/5421/screenshotofavis.png[/IMG][/URL]
This was after I created a new project, made the sequence settings into Apple ProRes lt 30p under the audio/video settings in Final Cut, and exported it as the same with 'current' dimensions (it was listed as 850X637, maybe that was the original?) Although I did have to render the original avi itself once it was placed in the timeline. I guess there's no way to know exactly what sort of avi my original file is so I can match my sequence to it? The 'more info' (to be fair im sort of used to 'properties') leaves something to be desired..
I guess my question is: what else can I change in my settings to leave the quality of the video intact, if anything?
Thanks everyone.

FInal Cut Studio 3 Upgrade - Sluggish

I've recently installed the Final Cut Studio 3 upgrade (incl. FCP7) and have found playback to be super slow and crashes often. I've also just exported two simple ProRes files to compressor and found it incredibly sluggish. Is there anything that I'm missing in the upgrade?

Actually the upgrade is able to be used on computers with no previous versions installed as long as you have the original Retail Serial Number which it will ask for.
Your installation method sounds perfectly OK.
I was really interested in whether you had upgraded the OS to Snow Leopard, as this can sometimes cause problems together with the accumulated rubbish that inevitably appears after a year or so of use.
I found that after upgrading to SL and then upgrading to FCS3, my computer generally was not performing well.
A complete erase of the hard drive and a reinstallation of everything made it good as new.

Final Cut Studio 2: Requirements and Recommendations

Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b

SORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b
Message was edited by: Rinaldo

"Motion 4" icon greyed out after upgrading to Yosemite - Did Yosemite break "Motion 4" in Final Cut Studio?

Against my better judgement (now that Apple has turned into Microsoft 10 years ago, breaking apps with every OS update, followed by radio silence from Apple, pretending like they didn't do anything), I just upgraded from Mountain Lion to Yosemite and noticed that my Motion 4 icon is now greyed out. Thanks Apple.
I still do the majority of my work in Final Cut Pro 7, with many, many, Motion 4 projects embedded in the timeline (so that I can change them in Motion and have them seamlessly updated in my Final Cut Pro project), including an unfinished feature length documentary on gay and lesbian history from 2000 BC until 1900 AD. Should I just throw the entire film into the rubbish bin? I would presume that Motion 5.1.2 is incompatible with Final Cut 7? So what am I supposed to do now?
1 - Downgrade to Mountain Lion (or heck, why not Snow Leopard?)?
2 - Switch to Adobe Premiere?
3 - All of the above?
Thanks (for nothing, Apple).
MacBook Pro 15" with Retina Display
2.4 GHz Intel Core i7
8 GB 1600 MHz DDR3
NVIDIA GeForce GT 650M 1024 MB

After some peacefull time my system crashed completely on Friday!
I installed all from Scratch to make sure its not some old stuff that I carried on during migration.
It's not a problem with the motion files as I deleted all of them and XML export is still crashing!
The situation is, that after installing it all I got the same quicktime translation error again and I am quite angry about how Apple handles clients who are working on projects with the recent FCP story.
Unfortunately due to the problems in exporting XML I am not even able to switch to Adobe Premier as this is the only way to import there.
After a lot of testing I am quite sure, that this issue has to do something with an Apple Update release between June 2011 and now.
Conclusion: Final Cut Studio II is not working correctly anymore as it did before June 2011!!! Apple, Please fix this issue asap.!!!!

General Overview on How to use Final Cut Studio to create a Blu-Ray DVD

I am a new user of Final Cut Studio and need an experienced user to give my a progression guide on how to create a Blu-Ray DVD of my recent Alaska Trip. Last month I spend 8 days in Alaska visiting Denali and Juneau primarily. During that time I took about 100 short video clips (HD 1080p) and 570+ still photos with my Canon 7D. I have experimented with some pieces of the software and have created a Blu-Ray disk using Final Cut Pro and Compressor. However my goal is to create this DVD with menus that will play short clips (some narrated) and still photos(also some narration). I did a short one in DVD Studio Pro this morning but need some general guidance on what progression and programs to use to create this project. I was not able to take my video from the Studio Pro Sequence I created for my 1st DVD I had to take the original clips which were processed using Apple ProRes 422 and copy them in one at a time and then find the audio (on the voice overs) I created and also place them into DVD Studio Pro one at a time. I obviously need some guidance on the proper progression.
Any help would be greatly appreciated.

Here's the situation...
DVD Studio Pro will not do the trick for you - it doesn't do blu-ray discs. If you want to do Blu-ray you've got to use either Final Cut Pro's "Export" command or Compressor's "Burn Blu-ray disc" template. The downside to both of these approaches is that you can't burn more than one title (or movie, etc.) using Final Cut Studio.
To do what you want to do, you need Toast (at least). Toast will auto-generate menus but will let you put more than one title per slide (so you can put multiple slideshows on the same disc).
If you want to do full-on customizing of menus and multi-level menus, for that you need Adobe's Encore.
My suggestion - Get Toast. Encore is close to $800.
Here's your progression (at least the one I use).
Edit in Final Cut Pro (ProRes 422 is fine, ProRes 422 LT would do the trick as well)
Export as QuickTime movies (original settings)
In Compressor using the H.264 for Blu-ray setting and Dolby Digital setting and create elementary streams for video (.264 file) and audio (.ac3). Make sure these files have identical names except for the extension.
Using toast, add the video file to the Toast project and it'll find the audio file.
Burn away!

Final Cut Studio is crashing a lot using a Mac Pro (nehalem) 2009

Greetings,
I have a video workstation based on a Mac Pro (2x2.26GHz Quad-Core Intel Xeon Nehalem, 6 GB RAM, 640 GB HD, 512 NVIDEA VRAM) with a Blackmagic Decklink HD Extreme 2009 and an Highpoint RocketRAID 4322 card (properly connected to a RAID 5 array).
I'm editing, with Final Cut Studio 3, a big TV project with some TGA and loads of HD XDCAM EX 35mbs video footage.
*What is happening wrong?*
Final Cut Pro is crashing to many times and dont let me work with the flow that is supposed. I start to work and i do a bit of scrubbing in the timeline and suddenly the rainbow spyral starts to spin and kaput! FCP just crashes.
I've tried to many things. Re-installing everything from the baseline, plug out the 2 PCIe cards (and not even the drivers are installed). Even so FCP still crashes with the project.
Funny thing is... This symptom only happens with the Nehalem Mac Pro. I have another station based on a Mac Pro 2x2.66 GHz Dual Core Xeon 3 GB RAM 2006 and when i run the project... everything works fine. FCP here doesn't crash.
This is what makes me believe that the problem must be with the new Mac Pro.
I have the reports generated by the FCP after the crash. You can find it here:
http://www.ideiascompernas.com/reports/
I'm getting frustrated because i've invested big in this workstation, safe in the knowledge that it was going to be stable to complete my requirements.
Is there anything that i or Apple can do to resolve my problem. Is it the processor? Extended Hardware Test says that everything is ok.
I'll be waiting,
best regards, thanks,
Pedro

You may want to also post here:
Final Cut Studio forum:
http://discussions.apple.com/category.jspa?categoryID=123
Content creation with Final Cut Studio
http://discussions.apple.com/forum.jspa?forumID=1137
I see you have the GT120, not a very nice card really but maybe it is 'enough.' I'd upgrade. To ATI Radeon 4870, once you get it stable and working.
http://discussions.apple.com/thread.jspa?messageID=10251193&tstart=0
I see your crash is kernel panic actually.
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 194
Almost always that is memory related, are you seeing parity errors?
Watch System Profile - Memory tab
Replace the RAM (I'd even up it to more memory, 6 x 2GB is what I would have configured for)
Have you tested your RAM? run Apple Hardware Test?
Disabled ALL USB and Firewire devices?
Is the RR4322 okay to run in slot #2 (16x) rather than in slot 3 or 4 (4x)?
Getting RAM replaced, advanced exchange, or go out and getting some Kingston or Crucial etc for your system, and swapping, really is one good method, trial and error, to find the cultprit or rule out RAM.
Errors like this can mean flushing your caches is a must, and possibly due to errors and crashes, clean system install, checking data (both time consuming) and being careful to recheck your drives with Disk Warrior and/or TechTool Pro 5 to insure there are not any corrupt files (not perfect either which is why restore the system from known good backup image can be a must).

Final cut Studio 2 - how much a no-go with logic 9?

I have the new Logic 9 upgrade but I see in the installation notes that the new compressor 3.5 and Soundtrack Pro 3 Is "incompatible" with Final cut studio 2.
Now I also run Finalcut studio 2 apps regularly but I hadn't planned on upgrading just yet but I certainly want to see soundtrack pro 3 (so many bugs in v2!!).
Does anyone know what will happen if I install STP and compressor from logic 9 regardless? How incompatible is incompatible?

My experience with logic9 and FCS 2...
I've installed the full package of Logic 9 regardless of the incompatibility problems (yes, brave, I know:-)
You are indeed "allowed" to do this - you just click a sort of "do it anyway" button.
So far I have launched existing projects and done basic edit cuts in FCP with no problems. I've edited for a day so I feel happy to conclude that basic editing in FCP is not broken.
I have exported ref. and self-contained movies via quicktime conversion so thats not broken.
I have exported XML files from FCP to Logic 9, thats not broken.
Soundtrack v3 launches, plays audio and appears to be ok after about 15mins of me testing - by no means conclusive testing.
I've used logic for a day and it seems just dandy.
I have not used colour, compressor or motion.
Just thought I'd mention it in case anyone else is facing the same dilemma as I was.

Can I use Final Cut Studio 2 software on a MacBook Air?

My old MacBook Pro was stolen a couple of years ago and I replaced it with a MacBook Air OSX 10.9.5. I still have the software from Final Cut Studio 2 which I used on my MacBook Pro. I haven't got around the replacing this and was looking at the Final Cut App when it dawned on me I might be able to use the software I have. Any thoughts? I know nothing about how computers work, so a simple 'No', 'Yes' or 'Do this to make it work', would be great!

I think the gist of what the two former responders are saying is that, if you can upgrade to software that will run natively in Yosemite, then you are seemingly much better off!
I am not a film editor (although I play one on my computer! hahahaha) but I have been told by many FCS2 users that they need ongoing access to it because of clients who ask for editorial updates to older projects. My understanding is that Final Cut Pro X will NOT open the FCS2 files for processing. Hence a valid reason to be able to install and operate FCS2 on today's modern Macs.
There are three methods to install and operate FCS2 in Mavericks; I have no confirmation yet that these work in Yosemite, or if once installed in Yosemite, FCS2 will operate properly. Here is a recent post I prepared to provide this information:
Apple has created a "bug" in the attempt to install FCP6 in Lion, Mt. Lion and Mavericks, which makes it look like Rosetta is needed for a PowerPC app, the installer, so as to make it difficult for the use of FCP6 in these versions of OS X! There are three ways to install it:
1. Pacifist https://www.charlessoft.com/
2. Jeremy Johnstone's Terminal method http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
3. HawaiianHippie has discovered the best and safest possible solution to this problem:
https://discussions.apple.com/message/26309669?ac_cid=tw123456#26309669
I have now successfully done this on four computers, brand new iMacs running 10.9.4. And I've discovered an even easier way to do this! You don't need to edit the plist file, just move it into the Trash. Install proceeds normally. You can return it after you're done if you like, I don't know what (if any) possible repercussions might come from leaving it deleted.
The file, as indicated on Jeremy Johnstone's blog, is
/System/Library/CoreServices/Installer.app/Contents/Resources/PPCRequirements.pl ist
(Note that when you get to Installer.app, you will have to Control+click and select "Show Package Contents")
I have not, as yet, attempted to recreate his success.

Final Cut Studio Export method

Similar Messages

Maybe you are looking for