Final Cut Studio lost S/N

I've upgraded to Leopard and now have to re-enter my serial number before I can use any of my Final Cut Studio (ver 1) applications. I'm also having trouble with the system recognizing my HP All-In-One (1315v) scanner. Everything else seems to work, but since I primarily edit video and author DVDs this is becoming a real problem for me.
I don't want a new FC Studio serial number, I just want to be able to use my old one. Unfortunately, I have lost it. All the other packaging materials are present and accounted for, just not this most important part. Is there a solution?

Thanks thrillcat.
I went ahead and installed and things are working normal so far. I downloaded the latest DP 4.6 patches as well.
Whew,
Todd

Similar Messages

  • How to register Final Cut Studio after upgrading system?

    After upgrading my system and changing to a new G5 Final Cut Studio lost Registering Info.
    Always after around 5 times booting Final Cut I have a dialog box, that I have to register.
    But the "Register Now" button is not aktive!
    What to do?
    G5 2x2 GB 1,5 GB RAM Mac OS X (10.4.7)
    G5 2x2 GB 1,5 GB RAM   Mac OS X (10.4.5)  

    Make sure you have filled out all the fields
    If I remember right, there is one field that is left blank (can not remember which one). Fill that one in, and the register button should become active.

  • HT3866 How to locate original serial to Final Cut Studio, only have upgrade serial.

    When rebuilding my system, Final Cut Studio lost serials, Soundtrack Pro asked for serial, I entered what came with my upgrade box set. It then said I needed to enter the original serial, which I no longer have. Any thoughts on how to obtain this? Big thanks.
    Benjy

    Try this: http://support.apple.com/kb/HT1861  It's old, but might be worth a try.
    -DH

  • HT200276 HOW WILL I GET THE LOST SERIAL NUMBER OF FINAL CUT STUDIO

    HOW WILL I GET THE LOST SERIAL NUMBER OF FINAL CUT STUDIO ???

    It's on the back of the installation booklet. If you've lost that, and have some proof of purchase, it can probably be sorted out by contacting Apple.
    Russ

  • Lost 1 final cut studio install disk

    hi
    i have my serial number and all install disk except dvd pro.  just can't find it.
    final cut studio 5 bought in 2006
    mbp 17'
    running snow leopard 10.6.8
    what can i do?
    thanks

    Hi Shane
    i was doing a fresh install of FCS because i had done a clean install of snow leopard on a 15" mbp
    informed through reading in this discussion forum that it is always better to fresh install applications rather than migrate them
    then i found i was missing the DVD SP disk - so i did the FCS install unchecking dsp and qmaster.
    after the FCS install i don't see DVD SP in applications folder.  [or am i missing something?]
    YOu can install and use DVD SP in the basic way, just no themes.  And you can have the installer not ask for the content by doing a custom install and unchecking it.
    on a 17" mbp - i do have both   - APPLE QM and DVD SP -  - i am just about to do a clean snow leopard install on this one too.  but first have just "plain" installed SL so that the 2 mbp have the same OS so i can miigrate files back and forth - or forth and back.
    will a migrated DVD SP and a migrated QM work with the reinstall of the rest of FCS for which i do have the original disks [with a software update to bring them to the same version 5.1.4?]

  • Final Cut Studio crash after OS 10.6.5 update

    10.6.5 and Final Cut Studio.
    Final Cut studio is not working after 10.6.5 update. Have spinning ball of death on many projects and exports from FCP crash Compressor and DVD Studio Pro (or they crash of their own accord)
    Question: Reinstall FCP??
    Question: is anything lost when deleting current FCS??
    Do not want to roll back to previous OS. Have done too much stuff since, and it's complicated.

    Question: Reinstall FCP??
    As a last resort, maybe. Have you tried using Disk Utility to repair permissions?
    Did you install the ProKit 6.0.1 update? There are some threads here that advise not to do so.
    You can find out by opening the Software Update pane in System Preferences and looking under the Installed Updates tab.
    Question: is anything lost when deleting current FCS??
    The applications, accompanying media content, associated libraries etc will be removed. You will not lose project files or media that you have imported from cameras or other sources.

  • I need a serial numbr forApple Final Cut Studio 2.0.1 Academic International

    I need a serial numbers for Apple Final Cut Studio 2.0.1 Academic International. I lost mind, if you have, please help! Thanks

    Read this: Pro Application replacement serial numbers

  • Final Cut Studio Educational version serial number

    I've been using an educational version of Final Cut Studio for years, and now it is asking me for my name and serial number before I open the program.  I've looked at the box that the discs come in, and have found some numbers, but they don't seem to be the serial numbers and they don't work.  Is there somewhere else that these serial numbers may be?  Also, is there a reason why I am forced to put in my information to log in now?
    thanks!

    There are two stickers with the serial # attached to the "Installing your software" pamphlet that came with the suite. This is the only place that you will find it.
    If you have lost the documentaion, follow these instructions:
    http://support.apple.com/kb/HT1861
    >Also, is there a reason why I am forced to put in my information to log in now?
    Have you recently had the computer repaired? The encrypted serial is tied to the Logic board ID. You will need to delete that file if so.

  • Installing Final Cut Studio 3

    Hi
    I recently had to restore from back-up to a new laptop. I went to use Final Cut Pro from (Final Cut Studio 2)and was asked for a serial number. Unfortunately I have lost the discs without registering (monumentally stupid I know). Bottom line is I want to buy a copy of Final Cut Studio 3 and install that.
    Would you recommend I uninstall my current unregistered version..or can I install straight over the top of it even though it is not an "upgrade" version I will be buying. (it will be the "full" version.)

    Always a good idea to do a clean install, however, if you buy a legit copy of fcstudio3, don't see why you can't just try using the full (rather than an upgrade) serial number when it asks for the serial number.
    Good luck in finding a copy of fcs3.  Apple's not selling it anymore.

  • Final Cut Studio Serial Number

    Hi-
    I am thinking of finally getting a Mac Pro, which will require upgrading Final Cut Studio and all that fun stuff.
    In looking for my original FCS DVDs, I realize they were lost in a move last year. I can't find the install DVDs, the booklet or the serial numbers!!!
    What info can I get off of my hard drive to be able to install FCS 3 on a new computer?

    Give applecare a call and see what they can do for you.
    x
    edit: Tom W posted this link in another thread. It may be useful to you.
    http://www.apple.com/support/proapps/serialnumbers/

  • Can I upgrade to Final Cut Studio 7 if my last version is also an upgrade??

    I upgraded to Final Cut Pro 4.5 with a version that was for upgrading to FCP 4 from either version 1, 2 or 3.
    I no longer have the previous version, just the FCP 4 box/discs and the "upgrade" authorization code on the sticker it came on.
    I see that there's an upgrade to Final Cut Studio 7 for around $300 from any previous non-academic version...but what about if the last version is an upgrade too?? It IS the FULL FCP 4.5.
    Am I eligible for this discounted upgrade to FC Studio 7? Has anyone done exactly this?
    Thank you for any solid info/experience on this you may have!

    This problem brings up another associated question.
    Is it possible to extract from the app/computer the original Retail Serial Number?
    With my Final Cut Express 4.0.1 I simply go to HD>Library>Application Support>ProApps and open the FCE System ID in TextEdit in order to have my original FCE 1.0.1 revealed. (The upgrade number of course is displayed on the splash screen and also "About FCE").
    However, opening the FCS System ID or the ProAppsSystemID does not reveal any serial number . . . . though my FCS3 is a Full Retail Version. Maybe if it was an upgrade, it might?
    Being able to access and save the original reg would be useful for anyone who has lost it since upgrading.
    It must be stored somewhere, unless when it was originally installed the computer just registered that it had a suitable number and did not save the specific one.

  • FINAL CUT STUDIO PRO - CAN'T GET "SMOOTHCAM" EFFECT

    PROBLEM:
    FINAL CUT STUDIO PRO - CAN’T GET “SMOOTHCAM” EFFECT
    I use a Macbook Pro 17”
    Software: Leopard 10.5. External LaCie Hard Drive 1TB
    I upgraded my Computer Software to Leopard and reinstalled Final Cut Pro and Motion on my Laptop. It worked fine with SmoothCam, but as I had lost too much space on my Laptop Harddrive, I decided to reinstall the full program, choosing custom location the external LaCie drive.
    Since than Final Cut Pro can’t find SmoothCam and it asks to reinstall SmoothCam.
    ➢ ./library/Plug-Ins/FX /Plug< Not Existing
    ➢ ./library-Application Support/ProApps/Internal Plug-Ins/FX Plug<
    This file is empty.
    My project I work on at the moment is a film, where I had done a lot of SmoothCams, but since reinstalling it will not find the effect anymore, it asks to reinstall SmoothCam.
    In the mean time I tried several times to start from scratch and reinstall the whole Program, but now I’m not even able to register anymore, it will not accept the correct Registration No.
    I would appreciate anybodies help very much.
    Zuckerhut

    I had a similar problem when I upgraded my MacBook Pro to leopard as well. This is what I did (after several trial and errors)...
    1.) Wipe the computer again and reinstall leopard. I suggest doing a custom install and just leave out things you do not need as they just take up valuable space.
    2.) Reinstall FCS but DO NOT let it install the additional content as we will get to that part later. Just install the core programs themselves and uncheck the boxes to install the additional content.
    3.) After FCS is installed re-run the installer and install the content but change the location to your external drive. At this point I created a folder on my external called "Final Cut Studio" and Created separate folders for each program and its content.
    4.) After you have reinstalled the content on to your external drive, go into each program and point them to where the extra content is kept. <--- This step and step 3 arent really needed, but they make things easy for when you have to wipe your computer. This has saved me LOTS of time on reinstalling FCP because now all you have to do is install the core programs from now on.
    You once you start FCP all your effects should be there. The main thing here is to do a complete wipe of the system and rebuild. Not just an uninstall / re-install. As far as your registration problem your going to have to call apple. I had a problem with an old serial number where it would not take it anymore after updating the software to 6.0.2 from 6.0. They can give you a new number to use and it does not take too long.
    Hope that helps you out some.

  • Removing Final Cut Studio

    I currently have an academic version of Final Cut Studio 2 and have purchased a new academic version of FCS 3.
    Question: Must I first uninstall the old Studio 2, and if so what is the best way? Has anyone used the Digital Rebellion FCS remover?

    Question: Must I first uninstall the old Studio 2.
    You do not need to uninstall FCS2 in order to install FCS3. All the relevant application files will be overwritten upon installation of the new version. Also consider the fact that FCS2 has Live Type.app which is not included with FCS3 so if you remove all of FCS2 by installing fresh from OS then you will lose Live Type.app. Most of Live Type/s features have been migrated into Motion 4, but if you're used to working in the Live Type application then it's something to consider when installing the new application.
    If you create disk images of the application DVD's then you will be installing from the disk images on a hard drive instead of reading the DVD's. This will cut the installation time down to about 1/2 hour vs. 90 mins. from DVD installation. Also you won't have to stick around to wait for the DVD to install and manually remove and insert the next DVD in the drive. You simply open the disk images and run the installation then come back in a half hour and it's all done automatically. If you've done this with all your application disks besides FCS3 then it would hardly take a week to reinstall from scratch as you've suggested. It's also recommended to backup your application disks to disk images anyway just like any other files you have... What would you do if you lost or damaged your FCS3 installation DVD's without disk image backups?

  • Will ANY Final Cut Studio serial suffice??

    Hi, I have Final Cut Studio 3, 2 and 1. I recently moved to a new machine and of course I lost my previous (final cut studio 2) serial, which I am prompted for when installing version 3. I cannot find it anywhere and fear that I may have to purchase a copy second hand, if that will work. That is my question, If I get a full retail Final Cut studio 2 and use it's serial with my FCS 3 install, will it be enough?

    You can use the upgrade version of FCP 7, as long as you have an older full version...it'll ask for that full version's serial number

  • Final Cut Studio 2: Requirements and Recommendations

    Hello Final Cut Studio 2 Experts,
    I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
    N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
    THANKS IN ADVANCE for your expert advise!
    So, here we go:
    Application-Specific Requirements
    Final Cut Studio
    Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
    1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
    Motion
    The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
    ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
    ATI Mobility Radeon 9700 or 9600
    NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
    For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
    2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
    Color
    The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
    ATI Mobility Radeon X1600
    ATI Radeon X1600
    NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
    A display with 1680-by-1050 resolution or higher
    A three-button mouse for full functionality
    3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
    DVD Studio Pro
    For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
    For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
    For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
    For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
    For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
    4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
    What is a "replicator"?
    Application-Specific Recommendations
    Motion
    One of the following graphics cards is highly recommended:
    ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
    NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
    For 32-bit rendering: a graphics card with 256MB of VRAM or more
    Color
    The following graphics card is highly recommended:
    ATI Radeon X1900 XT
    Dual displays with 1920-by-1200 or higher resolution
    5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
    My Power Mac G5 HARDWARE CONTENTS:
    Hardware Overview:
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 2
    CPU Speed: 2.3 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 4.5 GB
    Bus Speed: 1.15 GHz
    Boot ROM Version: 5.2.4f1
    Serial Number: G85167AGRU3
    ATA Bus:
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Built In Sound Card:
    Devices:
    Texas Instruments TAS3004:
    Inputs and Outputs:
    Line Level Input:
    Controls: Left, Right
    Playthrough: No
    PluginID: TAS
    Headphones:
    Controls: Mute, Left, Right
    PluginID: TAS
    Internal Speakers:
    Controls: Mute, Master
    PluginID: TAS
    Line Level Output:
    Controls: Mute, Left, Right
    PluginID: TAS
    Crystal Semiconductor CS84xx:
    Inputs and Outputs:
    S/PDIF Digital Input:
    Controls: Mute
    Playthrough: No
    PluginID: Topaz
    S/PDIF Digital Output:
    Controls: Mute
    PluginID: Topaz
    Formats:
    PCM 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    PCM 24:
    Bit Depth: 24
    Bit Width: 32
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    AC3 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: No
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    Bluetooth: No Information Found.
    SONY DVD RW DW-Q28A:
    Firmware Revision: KAS7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Fibre Channel: No Information Found.
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A58504-113
    Displays:
    Cinema HD Display:
    Display Type: LCD
    Resolution: 1920 x 1200
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display:
    Status: No display connected
    DIMM0/J11:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J12:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM2/J13:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM3/J14:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM4/J41:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM5/J42:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM6/J43:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    DIMM7/J44:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    PC Cards: No Information Found.
    PCI Cards: No Information Found.
    Parallel SCSI: No Information Found.
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 0
    Display Sleep Timer (Minutes): 0
    Dynamic Power Step: No
    Reduce Processor Speed: No
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On LAN: No
    Wake On Modem Ring: No
    Adobe PDF 7.0:
    Status: Idle
    Print Server: Local
    Driver Version: 10.4
    Default: No
    URI: pdf700://distiller/
    PPD: Adobe PDF 3016.102
    PPD File Version: 1.0
    PostScript Version: (3016.102) 0
    hp LaserJet 1012:
    Status: Idle
    Print Server: Local
    Driver Version: 1.4.5
    Default: Yes
    URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
    PPD: hp LaserJet 1012
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA Bus:
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Serial-ATA Bus:
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x2b
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x0b
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x09
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x08
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x00e0
    PCI Revision ID: 0x0004
    PCI Vendor ID: 0x1033
    Bus Number: 0x4b

    SORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
    Hello Final Cut Studio 2 Experts,
    I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
    N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
    THANKS IN ADVANCE for your expert advise!
    So, here we go:
    Application-Specific Requirements
    Final Cut Studio
    Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
    1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
    Motion
    The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
    ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
    ATI Mobility Radeon 9700 or 9600
    NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
    For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
    2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
    Color
    The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
    ATI Mobility Radeon X1600
    ATI Radeon X1600
    NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
    A display with 1680-by-1050 resolution or higher
    A three-button mouse for full functionality
    3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
    DVD Studio Pro
    For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
    For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
    For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
    For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
    For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
    4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
    What is a "replicator"?
    Application-Specific Recommendations
    Motion
    One of the following graphics cards is highly recommended:
    ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
    NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
    For 32-bit rendering: a graphics card with 256MB of VRAM or more
    Color
    The following graphics card is highly recommended:
    ATI Radeon X1900 XT
    Dual displays with 1920-by-1200 or higher resolution
    5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
    My Power Mac G5 HARDWARE CONTENTS:
    Hardware Overview:
    Machine Name: Power Mac G5
    Machine Model: PowerMac7,3
    CPU Type: PowerPC G5 (3.0)
    Number Of CPUs: 2
    CPU Speed: 2.3 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 4.5 GB
    Bus Speed: 1.15 GHz
    Boot ROM Version: 5.2.4f1
    Serial Number: G85167AGRU3
    ATA Bus:
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    SONY DVD RW DW-Q28A:
    Model: SONY DVD RW DW-Q28A
    Revision: KAS7
    Serial Number:
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Built In Sound Card:
    Devices:
    Texas Instruments TAS3004:
    Inputs and Outputs:
    Line Level Input:
    Controls: Left, Right
    Playthrough: No
    PluginID: TAS
    Headphones:
    Controls: Mute, Left, Right
    PluginID: TAS
    Internal Speakers:
    Controls: Mute, Master
    PluginID: TAS
    Line Level Output:
    Controls: Mute, Left, Right
    PluginID: TAS
    Crystal Semiconductor CS84xx:
    Inputs and Outputs:
    S/PDIF Digital Input:
    Controls: Mute
    Playthrough: No
    PluginID: Topaz
    S/PDIF Digital Output:
    Controls: Mute
    PluginID: Topaz
    Formats:
    PCM 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    PCM 24:
    Bit Depth: 24
    Bit Width: 32
    Channels: 2
    Mixable: Yes
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    AC3 16:
    Bit Depth: 16
    Bit Width: 16
    Channels: 2
    Mixable: No
    Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
    Bluetooth: No Information Found.
    SONY DVD RW DW-Q28A:
    Firmware Revision: KAS7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Fibre Channel: No Information Found.
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    ATI Radeon 9600:
    Chipset Model: ATY,RV351
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4150
    Revision ID: 0x0000
    ROM Revision: 113-A58504-113
    Displays:
    Cinema HD Display:
    Display Type: LCD
    Resolution: 1920 x 1200
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display:
    Status: No display connected
    DIMM0/J11:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM1/J12:
    Size: 256 MB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM2/J13:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM3/J14:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM4/J41:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM5/J42:
    Size: 1 GB
    Type: DDR SDRAM
    Speed: PC3200U-30330
    Status: OK
    DIMM6/J43:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    DIMM7/J44:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    PC Cards: No Information Found.
    PCI Cards: No Information Found.
    Parallel SCSI: No Information Found.
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 0
    Display Sleep Timer (Minutes): 0
    Dynamic Power Step: No
    Reduce Processor Speed: No
    Sleep On Power Button: Yes
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On LAN: No
    Wake On Modem Ring: No
    Adobe PDF 7.0:
    Status: Idle
    Print Server: Local
    Driver Version: 10.4
    Default: No
    URI: pdf700://distiller/
    PPD: Adobe PDF 3016.102
    PPD File Version: 1.0
    PostScript Version: (3016.102) 0
    hp LaserJet 1012:
    Status: Idle
    Print Server: Local
    Driver Version: 1.4.5
    Default: Yes
    URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
    PPD: hp LaserJet 1012
    PPD File Version: 1.0
    PostScript Version: (3011.104) 0
    Serial-ATA Bus:
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Maxtor 6B250S0:
    Capacity: 233.76 GB
    Model: Maxtor 6B250S0
    Revision: BANC1E50
    Serial Number: B61QB0RH
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "A (upper)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 233.64 GB
    Available: 50.02 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /
    Serial-ATA Bus:
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    Maxtor 7L300S0:
    Capacity: 279.48 GB
    Model: Maxtor 7L300S0
    Revision: BANC1E00
    Serial Number: L602X73H
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Protocol: ata
    Unit Number: 0
    Socket Type: Serial-ATA
    Bay Name: "B (lower)"
    OS9 Drivers: No
    S.M.A.R.T. status: Verified
    Volumes:
    Primo Volume:
    Capacity: 279.36 GB
    Available: 154.23 GB
    Writable: Yes
    File System: HFS+
    BSD Name: disk0s3
    Mount Point: /Volumes/Primo Volume
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x2b
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Hub in Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1003
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Optical USB Mouse:
    Version: 3.40
    Bus Power (mA): 100
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Logitech
    Product ID: 0x0307
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Apple Pro Keyboard:
    Version: 4.10
    Bus Power (mA): 250
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x020b
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0035
    PCI Revision ID: 0x0043
    PCI Vendor ID: 0x1033
    Bus Number: 0x0b
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    hp LaserJet 1012:
    Version: 1.00
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Hewlett-Packard
    Product ID: 0x0d17
    Serial Number: 00CNFB638356
    Vendor ID: 0x03f0
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x09
    USB Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0040
    PCI Revision ID: 0x0001
    PCI Vendor ID: 0x106b
    Bus Number: 0x08
    USB High-Speed Bus:
    Host Controller Location: Built In USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x00e0
    PCI Revision ID: 0x0004
    PCI Vendor ID: 0x1033
    Bus Number: 0x4b
    Message was edited by: Rinaldo

Maybe you are looking for

  • Can't edit in QT Pro

    Dumb Question. I've updated to pro and can select parts of a movie, but the edit selections (cut, copy, paste, trim to selection, etc.) are not active. What am I doing wrong?

  • Can't Uninstall 9.0 Trial -- doesn't list in add/remove pgms

    I've installed the trial version of Acrobat 9.0 and decided to uninstall it.  However, it doesn't show in the add/remove programs list out of Control Panel.  I'm running Win/XP SP3.  Web searches have uncovered this program for Macs but not for Windo

  • What version of adobe allows edit capability on an adobe document?

    What version of adobe allows edit capability on an adobe document?

  • Total no. of users logged into the database

    Can we find out total number of users logged into the database? I do not have DBA privileges. If it is not possible by a straight SQL then do I have any other options? Thanks.

  • Java Print Service - PDF Printing

    Hi , I dont get any help on docs why PDF is not working on my local printer. I have searched forums and found many people facing this problem. I have also tried setting up printer and my java environment on same windows XP system and continues to get