Final cut studio training dvd does not match media files

I haven't seen an answer to the question of what to do when the training dvd for fcstudio does not match the media files on the other disc.

Thus the reason for this:
www.proapptips.com/shane NON STANDARD CODECS IN FCP
Shane

Similar Messages

  • Final Cut Studio Training DVD Tutorial

    The DVD Tutorial is subtitled in Spanish, French, German and Japanese.
    Why not in English? I'm deaf. Is there any way for me to get this DVD with English subtitles or captions?
    17 in. Power Book   Mac OS X (10.4.6)  

    I don't think so, but it might be worth a call to 1-800-MY-Apple for the answer.
    Probably should be looking at other tutorials that are in print only...
    Jerry

  • Anamorphic Setup - Final Cut Studio Training

    I inadvertedly posted this in the DVD SP forum. I'd like to move it here where it belongs.
    I just got my Final Cut Pro Studio a couple weeks ago, had to finish a project that I was doing in FCE and iDVD, and am now reviewing the tutorial on the Final Cut Studio Training DVD.
    One of the first steps is to setup the session to "DV-NTSC Anamorphic". Since I had already blown past that 2 week ago, I did not see it this time, nor could I find the correct menu to make that setting for the tutorial. So I just blew by it; realizing that I'd find out sooner or later what the cost would be.
    I found out: When doing the Motion segment and importing the final "TrailerLowerThirds" back into FCP, that part is compressed horizontally with black side bars on the right and left.
    3 questions:
    How do I make that setting if I've been running FCP already?
    What does that do to the project, the clips, anything else?
    If I were to make this mistake on one of my projects, how would I recover?
    So far I've only been making projects in DV-NTSC 2:3 (I guess that's the right way to say it). Any insights would be appreciated.
    G5 dual core 2Ghz, 2.5 GB, 160, 300GB & 300GBfw   Mac OS X (10.4.6)   FCE HD, FCSP5.1

    My second question was: "What does that do to the project, the clips, anything else?"
    The essential thing to bear in mind is that 4:3 and 16:9 anamorphic projects (in the SD world) have the SAME resolution: 720x480 pixels for NTSC, 720x576 for PAL. Because the resolution is the same, but the apparent frame size is different, it can lead to confustion, and it's easy to get it wrong - especially over there in the US where anamorphic broadcasting of SD material never took off, and thus widescreen sets were never mass market before HD.
    (The situation here in Europe is different.).
    Have a read of this for clarity: http://www.helerab.fi/widescreen/
    The anamoprhic easy setup just tells FCP that you are capturing anamorphic material, and that new sequences should be anamorphic by default. You can override these defaults if necessary, but the easy setup just makes it harder to mess up.
    The important thing when going to DVD is to keep the workflow anamorphic all the way through: output anamorphic material from FCP, make sure material is transcoded to mpeg (whether through compressor, iDVD or Quicktime) with anamorphic settings intact; and in your DVD authoring application, make sure projects, menus and tracks are created or flagged as 16:9.
    The end result is an anamorphic DVD.
    Your DVD player has a menu where you tell it what type of TV it's connected to - whether 4:3 or widescreen (and if it's a 4:3 set, how it should handle widescreen material: either letterboxing it or "cropping" it via pan/scan).
    I've started noticing in other posts that some people think that if you have anamorphic material you should set your DVD player to 16:9. This is NOT A GOOD IDEA (unless the DVD player is attached to a widescreen TV, in which case you have it set to 16:9 already!) Just set the DVD player once and leave it alone.
    Hope these observations help get you started. If you understand what's going on with anamorphic media, you're less likely to make mistakes. Best of luck.

  • Final Cut 6 and Color does not work

    Hello,
    I bought FInal Cut Pro Studio 2 and i receive the suite today and instal only apps ( no contents and loops )without problem
    Tried to open FCP6 and Color but not working.
    i launch FCP 6 or Color,2 jumps on dock and then quit.
    can be memory problem.( i have 768RAM on my imac G5 64VRAM)
    any pacth to resolv this problem?
    ps* SountrackPro 2,DVDStudio Pro,Motion3,LiveType,CinemaTools and Compressor woks fine in the same computer
    Computer configuration
    IMac G5 1.6 with 64VRAM and 768RAM
    thx in advance

    Ok,forgot Color,but and about final cut 6 ? why does not work?
    max resolution 1440x900.
    i was looking the systen requirements on fcp page
    Minimum Requirements to Install All Final Cut Studio Applications
    Final Cut Pro 6
    Macintosh 1.25GHz or faster PowerPC G4, PowerPC G5 = OK
    1GB of RAM = NO,my iMac have 768RAM
    1024-by-768 resolution or higher OK
    Mac OS X v10.4.9 or later OK
    QuickTime 7.1.6 or later OK
    A DVD drive for installation OK
    Can i deduce that problem is because i don't have RAM enought?
    THX

  • Got JBO-25080: Definition name does not match the file it is loaded from

    We are using jdev 11.1.1.5.0
    We got the following error when running ADF application on Windows 2008 platform
    [2011-08-26T23:57:53.728-05:00] [AdminServer] [WARNING] [] [oracle.adf.controller.faces.lifecycle.Utils] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 87d74ec2641f19b2:21e0e8f6:131ffbcf000:-8000-0000000000000afc,0] [APP: grc863] ADF: Adding the following JSF error message: Definition name: Survey does not match the file in which it is loaded from: oracle.apps.grc.domain.survey.survey[[
    oracle.jbo.NoDefException: JBO-25080: Definition name: Survey does not match the file in which it is loaded from: oracle.apps.grc.domain.survey.survey
         at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:1127)
         at oracle.jbo.mom.DefinitionManager.loadParent(DefinitionManager.java:1353)
         at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:1061)
         at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:562)
         at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:484)
         at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:466)
         at oracle.adf.model.generic.AccessorDefImpl.getStructureDefImpl(AccessorDefImpl.java:217)
    However, we are able to run application fine on linux platform.
    We are aware of the bug https://bug.oraclecorp.com/pls/bug/webbug_edit.edit_info_top?rptno=8746171
    We changed the UI classes to avoid that issue but we did not change our backend classes.
    Thanks

    Looks like you are an Oracle employee as the link you provided can't be reached from the outside.
    If this is correct, you should use some kind of internal communication to address your problem, as we the normal users don't have access to the internal stuff.
    Timo

  • Executable version(7.​1.1) does not match resoourse file(7.1)

    i developed application software and build exe file for the application and installed the software. when after restart, if  run the application i get the message "Executable version(7.1.1) does not match resoourse file(7.1)  Check ur congiguration"
    how to solve the problem? 

    Have you already tried this ? Let's us know if this doesn't solve your problem.

  • Export and burn - Final Cut Studio to DVD Studio Pro

    I think I am doing all the right settings when I try and convert material that was filmed with an HDV camera into a suitable format for burning and playing on a traditional SD DVD recorder. But even with encodings of 720 x 576i PAL, the disc once burned is rejected by my DVD player, although it plays fine on the Macbook Pro I amusing for editing and burning. Am I missing something obvious? I looked for a standard MPEG -2 setting in the Quicktime Conversion window, but couldn't find one. I have the first version of Final Cut studio, which I think is really FCP v.5.1.
    Thanks
    Nick

    It sounds as if you are choosing the HD DVD checkbox in DVD SP.
    You shouldn't.

  • Final Cut Studio 2 and Macbook (not Pro)

    Curious to know if anyone has any experience running Final Cut Studio 2 on a non-pro Macbook. Can Macbook handle Final Cut Pro alright? Is video memory an issue?
    Thanks,
    Mbs

    For the record, Motion will run on a MacBook. It's just that some of the features aren't supported, and will produce incorrect results. So I wouldn't rely on it.
    Final Cut, however, works perfectly. No problems at all.

  • Final Cut Studio 2 upgrade ruined my HD video files!

    Okay, now I'm really puzzled. I installed Final Cut Studio 2 to upgrade my PowerMac G5. Now, all the HD footage I recorded, both in iMovie HD and in FCP 5 from my Sony HDR-FX1 camera has annoying green and red streaks that flash repeatedly. Even iMovie HD has the same problem when playing back old HD projects. The streaks also appear if I try playing the files back through Quicktime Player.
    How do I know that the upgrade was the issue? As luck would have it, I still had my copy of FCP 5 installed. I opened one of the old HD projects in version 5 format in FCP 5, and the video plays back perfectly. Load the same project into FCP 6, and streaks.
    Exactly how is this an "upgrade"? How do I fix?

    Issue
    Earlier versions of the applications in Final Cut Studio might not open or may behave unexpectedly if you use them on your computer after upgrading to Final Cut Studio 2.
    When you upgrade to Final Cut Studio 2, there are a number of application-support resources that also get upgraded. Earlier versions of the applications in Final Cut Studio are not compatible with these newer support resources, and should not be used on a computer that has been upgraded to Final Cut Studio 2.
    Affected Products:
    Final Cut Pro
    Motion
    Soundtrack Pro
    Compressor
    DVD Studio Pro
    Qmaster
    Cinema Tools
    LiveType
    Solution
    Don't move or rename Final Cut Studio applications after they're installed. If you have moved or renamed applications, they may still be present on your hard drive after you upgrade to Final Cut Studio 2. You can delete the vestigial applications them by dragging them to the Trash.

  • Published Site Does Not Match Design File

    I've published a website but it does not match the design file.  It's showing an older version that has since been changed and not sure why it's picking up something I've updated and saved over many times.  Thanks for any and all help.

    And now I'm seeing a problem of a similar nature.  The design and preview show a smooth transition between all pages, but the published site shows the logo in the upper left "jumping" when I leave the home page.  I've checked the page properties between all of the pages and they seem to be set the same.  I am using only one master page for all of the pages.  Any ideas on why this would be occurring?  The website is jacksoncompany.net.

  • AppleScript: Final Cut Pro X library does not open! FCP X AppleScript reference?

    I am trying to automate a few things within Final Cut Pro X. In the Apple Script Editor, in the list of Dictionaries (Library Window), FCP X does show up. But when I click on "Open Dictionary", nothing happens. Any idea why and how I could get around this?
    I would really like to know, which FCP X functions are available from AppleScript. Thus, I don't necessarily need the Dictionary in the AppleScript Editor. Any other list would do as well. But I can not find some.
    I checked whether FCP X is actually supposed to have an AppleScript dictionary by using the script mentioned on this page
    http://books.gigatux.nl/mirror/applescript/0596008503/applescripttmm-chp-12.html
    The answer is yes.

    I am trying to find out the same thing, Till have you found an answer to this? Can you contact me directly please as I'd like you to help me with scripting.

  • Final Cut Pro search window does not SORT.

    I am an editor and I use Final Cut Pro everyday. I recently had to upgrade to LION because of a wonderful Quicktime update that corrupts
    video codec files on Snow Leopard. So now that I have LION I can actually edit again. But, when I try to import files into Final Cut the
    search window wont sort my files by date, name, etc...
    It wont actually sort by anything. Every other program works fine for that, mainly After Effects. I have to manually go find files that I used
    to give a certain naming system to because I could find them easily by typing in one word.
    I also cannot search the Network anymore at my office which is a real pain. We dump all our finished projects onto a huge server. Now
    when I need to find an old file I have to know the exact date it was made or else I have to go searching through every folder in our server.
    Any body know of any way to fix these issues without having to rewrite code which I really don't want to do with my company computer.
    Also our IT people refuse to learn anything at all about MAC computers which is SO helpful...

    Im not sure what you are referring to. Maybe I didn't explain the problem correctly.
    Final Cut seems as if it is not indexing the files. Most of the time it won't even show me dates (modified, created, etc...) just dashes. Then if I  do what you are describing and try to sort it at all it stays in the same exact order. I can't even sort alphabetically.

  • HT4775 Final cut pro tab share does not work with mountain lion V10.8

    I have upgraded to mountain lion and since  than the tab share in final cut pro X is not working anymore.
    Any suggestions???  Thanks

    Trash preferences and repair permissions in Disk Utility.
    If that doesn't free Share up I'd drag app to trash, reinstall it and run repair permissions again.
    Good luck.
    Russ
    BTW, not that it matters a lot, but this is the Compressor forum.

  • Final Cut Studio 1.0.1 Not meeting Snow Leopard Hardware requirements?

    Hi, I just got a brand new 22" iMac, running snow leopard. I have an old copy of FinalCutStudio 1.0.1 and when i try to install, it says *Alert! Your computer does not have the hardware required to run this software* I checked in the read me, and it meets all the requirements. I am running rosetta too - please help??!

    Your other post was answered - http://discussions.info.apple.com/thread.jspa?threadID=2377204&tstart=0

  • Final Cut Pro 7.03 does not start up in Mac OSX Lion

    Hi,
    Upgraded yesterday to Lion, and since then my FCP7.03 does not start up anymore. It says 'PID: 478, Event: hang in the report section after a forced quit. Can anybody help me out, I got work to do!
    Thanx

    What procedure did you use to uninstall FCP?
    Trashing the app itself is not uninstalling. There are many components at system level, some in folders that are normally invisible to the user. If one of those files was damaged, the problem is still there. To completely remove FCP and/or other parts of FCS, use this free tool.
    After installing a major upgrade such as Lion, you should have used Disk Utility to repair permissions on the boot drive. Did you do this?
    The first step in troubleshooting FCP is to trash it's Preference files. You can do this by hand or use this free tool.

Maybe you are looking for

  • Start a new page per table entry

    The interface is simply a table. There are 2 sub-tables with unlimited rows in the table. This makes the length of an entry flexible. Typically one entry holds 1~2 pages. Now for each table entry (or table row), we need make it start a new page. The

  • CRIO 9025 Data Logging (128+ Channels at @ 1000Hz)

    Hello, I have the following configuration: (1) cRIO 9025 controller on a NI 9118 8-slot Virtex-5 FPGA chassis, loaded with AI/TC modules (2) NI 9144 8-slot EtherCAT expansion chassis connected to the 9118 via EtherCAT, loaded with AI/TC modules I hav

  • Event key

    I did a simple test on EventKey. But it does not work. The EventKey for "newinventory" defined in the BPM examples is used in the test. The expression is defined as follows. XPath("/newinventory/item/id/text()") The "eventkeytest" workflow performs a

  • Time capsule guest network problem

    I am trying to set up a guest network on my timecapsule. I can get as far as filling in all info in airport utility but after I click update, I recieve a warning " there was a error in you setup" and it shuts down my time capsule and I have to reboot

  • Satellite L20: Can I disconnect devices like USB Mouse without turning power off?

    Hi, all. I'm an owner of Satellite L20 notebook. I have always turned power of my computer off when i need to connect or disconnect any USB Device. Some devices have a special icon on the taskbar to disconnect them but some doesn't (USB FDD or flash