Final cut studio use for other media

Hi
I own Final Cut Studio, and have been using it to produce web videos, and DVDs for some clients and myself, but I've recently expanded to making games/apps. I was wondering if I can legally include some videos made with Final Cut studio, and sound effects made or used from Soundtrack pro in interactive media, like video games?
Thanks

Since they can be used for inclusion in projects for distribution and broadcast I can't see any problem to include them in video games or apps. However, when in doubt about legal issues, always consult a competent attorney.
-DH
Message was edited by: David Harbsmeier

Similar Messages

Buy Final Cut Studio 2 for DVD Studio Pro? Pro & Cons of DVD Studio Pro?

I am thinking of buying Final Cut Studio 2 because it includes the DVD authoring software DVD Studio Pro. iDVD uses automatic settings that are hard if not impossible to alter and so some DVDs are authored with very poor bit rates.
1. Is it possible to change the bit rate manually in DVD Studio Pro so the best Quality DVD can be authored?
2. Is is possible to change the audio from PCM (which takes up a lot of DVD space) to AC-3 in DVD Studio Pro, so picture quality is improved?
3. Is there a way to buy DVD Studio Pro as a separate software package and use it with Final Cut Express?
4. Generally what other options for DVD authoring with Mac are there besides iDVD and DVD Studio Pro?
5. Is DVD Studio Pro a good piece of software or are there any particular faults?

1. Yes, but you would use Compressor for your encoding instead of DVDSP.
2. DVDSP will only encode to AIFF, Compressor will allow you to encode audio to AC3.
3. Negative. DVDSP is only available as part of Final Cut Studio 2.
4. You could try using Roxio Toast.
5. DVDSP gets the job done for me. I think it works quite well.
For a good explanation of how Compressor and DVDSP workflows work within Final Cut Studio, I'd recommend you take a look at DVD StepByStep

Final Cut Studio asks for serial number EVERY time I open a program

I recently purchased Final Cut Studio 2, and every time I open a program (Motion, FCP, Compressor, etc.) it asks me to put in my name and serial number.
What gives?

In case anyone happens upon this thread - the answer can be found here:
http://discussions.apple.com/thread.jspa?messageID=4582284&#4582284

Installing Final Cut Studio to disk other than the startup disk?

Is it posable? if so, how. My startup disk is only 20GB and I have an 80GB in the case too, but no tiger install disk. It takes 30GB to do a full install.

The applications need to reside in the default location - on the startup disk. However, all the support files can be placed in other locations.
The apps = 5GB or so. It is all the support files that take up the space.
good luck.
x

Slow Rendering Time After Installing Final Cut Studio 2 Upgrade

I have a Mac Pro with two dual core processors, 8 GB of Ram, and 1 Terabyte of storage. I'm running the latest version of OSX. Ever since I upgraded to Final Cut Studio 2 my rendering time in Final Cut Pro 6 has become painfully slow. For example, it now takes at least an hour to render a short 5 minute video project. A project that size used to take just a few minutes. I uninstalled Final Cut Studio using AppZapper because I couldn't figure out how to remove the program any other way. Then, I reinstalled Final Cut Pro 6, but it didn't fix the problem. I called Apple's Final Cut Studio tech support, but they just had me upgrade Final Cut Pro 6 to 6.0.1. Unfortunately, this didn't fix the problem. Everything worked fine with Final Cut Pro 5, but ever since we upgraded everything has fell apart. Can anyone give us any insight into fixing this problem? So far, Apple's Final Cut tech support has been unable to find a solution.

Just a couple things to double check.
1. Repair Disk permissions, RESTART.
2. Try setting your RENDER DRIVE to something Different than the Media drive, RESTART.
3. Try Hosting your Media on a new Drive, RESTART.
Also, at this point since you are having system problems, I would backup all of your Media, Projects, etc. I just read a post of someone else that didn't have backup of their project and it became corrupted. I use Lacies SilverKeeper to automatically backup about 20 times a day, so we have dupes of at least all our Projects. And the first thing I do every morning is start the system up, repair disk permissions, and RESTART.
The reason why I suggest restarting after each attempt at changing preferences and such is so that the next time you load FCP it loads the settings that you have saved/changed as native settings as opposed to changed settings, this does make a difference. You will know what I am talking about if you have experienced the Log & Capture Input problem for FCP 5.
Let me know, I have some other suggestions if these don't work.

New user to Final Cut Studio 2

I am using Final Cut Studio 2 for the first time and I am having a hard time loading video files. I have several quicktime files which won't open in Final Cut and some video I recorded on a camcorder using mini DV tapes which I am also unsure how to import. I cannot figure out what the format of the DV is. As you can tell, I know pretty much nothing about video.... stuff.... I've read the manual for Final Cut (first volume) and my camcorder and neither were helpful for this basic stuff. Any help would be appreciated.

Hi
Tom got some important questions on Your set-up
I got his (Tom Wolskys)
"*Complete Training for FinalCut Pro 6*" DVD-education
for beginners & intermediat users
as birthday present. This was of enourmos help and a joy to go trough.
• my miniDV tape Camera - only connects via a FireWire Cable (USB=NO NO)
(some miniDV Cameras has to be set to DV-out on it's menu system)
Yours Bengt W

Can I upgrade to Final Cut Studio 7 if my last version is also an upgrade??

I upgraded to Final Cut Pro 4.5 with a version that was for upgrading to FCP 4 from either version 1, 2 or 3.
I no longer have the previous version, just the FCP 4 box/discs and the "upgrade" authorization code on the sticker it came on.
I see that there's an upgrade to Final Cut Studio 7 for around $300 from any previous non-academic version...but what about if the last version is an upgrade too?? It IS the FULL FCP 4.5.
Am I eligible for this discounted upgrade to FC Studio 7? Has anyone done exactly this?
Thank you for any solid info/experience on this you may have!

This problem brings up another associated question.
Is it possible to extract from the app/computer the original Retail Serial Number?
With my Final Cut Express 4.0.1 I simply go to HD>Library>Application Support>ProApps and open the FCE System ID in TextEdit in order to have my original FCE 1.0.1 revealed. (The upgrade number of course is displayed on the splash screen and also "About FCE").
However, opening the FCS System ID or the ProAppsSystemID does not reveal any serial number . . . . though my FCS3 is a Full Retail Version. Maybe if it was an upgrade, it might?
Being able to access and save the original reg would be useful for anyone who has lost it since upgrading.
It must be stored somewhere, unless when it was originally installed the computer just registered that it had a suitable number and did not save the specific one.

If i buy final cut studio 2 and then get final cut studio 3 upgrade will it be final cut studio 3

ive been looking around to buy final cut studio 3 for weeks now with no success and i think ive found a solution i'm just wondering if it will work by buying final cut studio 2 full and then buying final cut studio 3 upgrade overall will everything be final cut studio 3?

You can still get the FCS3 upgrades from the apple shop
No you can not get FCS upgrades from Apple retail stores or Apple dealers, they have been recalled by Apple.
Only places that will stock is independant retailers and online used software vendors.
Apple have clearly stated that FCS is now ''end of life''

Final Cut Studio 2005

I have Final Cut Studio 2005 for my PowerMac but now I want to install it on my MacBook with an intel processor. How do I do this? Is there an emulator I can download?

You mean Final Cut Studio 1, with a 5.0.x version of FCP?
Forget it. It will install but some parts simply will not work. Others will kind of work, but be prone to random crashes and sudden refusal to perform a function that worked 5 minutes previously.
If this is a full retail version that you have, you can use the serial number to install a lower priced upgrade of FCS 2009, that will work properly.

Will Final Cut Studio do the job?

Hi
I've been using imovie for small easy projects for a number of years now and its great. However recently I filmed a wedding for some friends and need a program with a little more punch to do a professional job.
Firstly is Final Cut Studio accessible for a novice like me?
There are a few things I need to fix in post production that imovie just can't do. For example there are certain points where I need to eradicate bad camera shake. The other main problem is the sound. I recorded the sound separately on an audio device but for whatever reason the wav file is extremely quiet when played back. Therefore I need something to boost the sound. Is there anything in Final Cut Studio that will do this? These are the two big problems, there are other things like blond hair glair but I can sort that out later! Is Final Cut Studio right for me and do I have to be a computer genius in order to use it?
can anyone suggest any good books to purchase to help use the program.
Thanks
Kev

My friend has a new boxed Final Cut Express 4 (he hasn't even opened it!) he will sell to me dirt cheap so would the quality be better for importing on that?
Go for it! Although I said earlier to stay with iMovie, given you are using DV tape you are no doubt better off with FCE due to the quality difference when using DV (when compared to iMovie '09). As I mentioned, I'm happy with iMovie '09 as I'm using AVCHD and get great results. I continue to use iMovie HD 6 for DV, although just for some early projects that need to be edited or completed.
Otherwise how do I go about getting iMovie HD 6?
Users in the iMovie forums recommend eBay, as it is no longer available from Apple. However, as it is now a product not supported by Apple, you will be better off using Final Cut Express 4 - particularly as you can get it from your friend at a great price! Follow Ian's advice and work through the Izzy Video free tutorials - it appears to be an excellent resource.
John

Final Cut Studio Upgrade from 10.4.11?

I just want to be absolutely sure that I qualify for the upgrade. I purchased Final Cut Studio 5 on my old power pc (not intel) using 10.4.11. I believe the discs are universal but my question is this. I'd like to buy a new power mac and just the FCS upgrade. Will I qualify even though my FCP version is from the power pc/10.4.6 days? In other words, can I install from scratch on a new power mac just the upgrade disks or do I need the original FCS 5 disks for complete installation?

I purchased Final Cut Studio 5 on my old power pc (not intel) using 10.4.11
There is no Final Cut Studio 5. The current version is Final Cut Studio 2009, also known as Final Cut Studio 3.
If you're referring to Final Cut PRO 5, then it is not compatible with Intel processor Macs. The first version that was compatible was version 5.1 (aka the "Universal" version).
I'd like to buy a new power mac and just the FCS upgrade
Good luck with that. PowerMacs, called so because they used Power PC (PPC) processors, have not been manufactured in some time now. All that's available new for the past couple of years are Intel Macs. Or perhaps you've stumbled across one that was h>I purchased Final Cut Studio 5 on my old power pc (not intel) using 10.4.11
There is no Final Cut Studio 5. The current version is Final Cut Studio 2009, also known as Final Cut Studio 3.
If you're referring to Final Cut PRO 5, then it is not compatible with Intel processor Macs. The first version that was compatible was version 5.1 (aka the "Universal" version).
I'd like to buy a new power mac and just the FCS upgrade
Good luck with that. PowerMacs, called so because they used Power PC (PPC) processors, have not been manufactured in some time now. All that's available new for the past couple of years are Intel Macs. Or perhaps you've stumbled across one that was hidden away in a warehouse somewhere.
Will I qualify even though my FCP version is from the power pc/10.4.6 days?
Yes, as long as you own ANY retail version of Final Cut Pro (all the way back to version 1), you qualify for the $299.00 (USD) upgrade to the current version of Final Cut Studio.
In other words, can I install from scratch on a new power mac just the upgrade disks or do I need the original FCS 5 disks for complete installation?
All you'll need are the upgrade install discs and the serial number for the upgrade as well as the serial number for your previous version. The previous version does NOT need to be installed at all.
-DHidden away in a warehouse somewhere.
Will I qualify even though my FCP version is from the power pc/10.4.6 days?
Yes, as long as you own ANY retail version of Final Cut Pro (all the way back to version 1), you qualify for the $299.00 (USD) upgrade to the current version of Final Cut Studio.
In other words, can I install from scratch on a new power mac just the upgrade disks or do I need the original FCS 5 disks for complete installation?
All you'll need are the upgrade install discs and the serial number for the upgrade as well as the serial number for your previous version. The previous version does NOT need to be installed at all.
-DH

Final Cut Studio 2 Manuals in Package ?

I just got my Final Cut Studio 2 upgrade and the box had 4 Manuals for Final Cut Pro 6 and one for Color. There were no manuals for Soundtrack, Compressor, Motion, etc. Is that because I got the upgrade ? Did people who got purchased Final Cut Studio 2 for the first time get manuals for everything ?

I don't even believe the full new purchases had anything more than what you had in the way of printed manuals.
Rest on pdf files.

Which final cut is best for macbook pro with snow leopard?

which final cut is best for macbook pro with snow leopard?

Probably FCP 7 which is part of Final Cut Studio 3.

Final cut studio and leopard

i need to know if final cut 5 (final cut studio) will run with leopard os x

While I think that Leopard is a fine new OS, and I love it, I CANNOT RECOMMEND that you install it on a Production machine. There are just too many reports of issues, and really, Leopard adds nothing to the Final Cut Suite. New versions of the OS are notorious for not working with everything...and currently it DOES NOT work with many Adobe products. There are also many third party devices that may need to be checked into, like ATTO cards, eSATA cards, Firewire cards, capture cards....many many things.
If you have a good working machine, stick with Tiger. The new OS is nice and slick, but has YET to get a clean bill of health for any version of Final Cut Studio.
Shane

Final Cut Studio 5.0.4 Upgrade to Final Cut Studio 2 HD Crash now needing to install on laptop

I had Final Cut Studio 5.0.4 on my laptop which I upgraded to Final Cut Studio 2 during the 12 month period when it was offered at a reduced price. My old G5 Hard Drive has bit the dust and I am trying to install on my laptop. I have successfully re-installed upto 5.0.4 including the troublesome compressor 2.0.1 and Qmaster 2.0.1. There are no further updates apparently when my laptop scans for any. I am running OSX 10.5.8. Now when I put the disks in for the Studio 2 all FCP, Motion, Soundtrack Pro, Compressor, DVD Studio Pro, Apple Qmaster, Live Type and Cinema tools are all grayed out, saying they need to be upgraded first. I am guessing it is because this 12 month deal is no longer available. Does anyone know a work around for this? I paid $499 for this upgrade and I cant re-install it?
My laptop is 2.4 GHz Intel Core Duo, 2 GB 667 MHz DDR2 SD RAM, small for FCP but I don't keep files on there.
Any help would be appreciated.
jennymanning

why did you install FCP 5 when you are going to install FCS 2? FCS 2 upgrade installer does not need FCP 5 installed and therefore you dont need updates as you will be installing a newer version of FCP.
During the installation process of FCS 2 it should ask for the serial number of FCP 5 then ask for the upgrade serial number for FCS 2. You must have both of these or it wont install.
Check this spec for FCS 2 with your laptop to see if it is compatible, if the machine is not compatible, it wont install.
Final Cut Studio 2 Spec

Final cut studio use for other media

Similar Messages

Maybe you are looking for