Final cut will not launch after fcs2 install (successful)

I have just installed FCS2 and unpon launching the software. It gives an option to relaunch but that doesn't work. I've tried searching in the threads and haven't gotten anywhere.
I just updated to Leopard doing about a month ago doing a clean install, not an erase and install.
This is error message I am getting
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/ProFX.framework/Versions/A/ProFX
Referenced from: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Reason: image not found
Any help?
Thanks

Ok, here's what happened I needed the Pro Applications Update 2007-2, when I did a software update search it never gave that as an option. I had to discover it by looking through the error details and going in to the FCS2 section of Apples site and download it from there. I didn't even know that it would be the right update but it appears to be, Final Cut just loaded for the first time.
Thanks for your help.

Similar Messages

Palm 4.2.1 application will not launch after re-install of software

After migrating my palm software from my old g4 to my new MacBook Pro OS 10.5.6 and having sync issues I was instructed from PALM to uninstall then repair permissions and re-install. I have done this and now the new PALM application will not launch. Can anyone help?

What SPECIFICALLY happens when you attempt to launch the Palm Desktop? What error message do you see as a result?

Itunes will not launch after fresh install and repeated re-installs

I've been browsing around the forums here and the support system hoping for an answer to this question.
On Monday my hard drive died and I had to buy a new one. I reinstalled windows and itunes among other things. I have a brand new Video Ipod as well. I haven't even had a chance to plug it in!
Itunes worked for about 2 days and suddenly stopped working. I mean literally, if I double click on the icon and start up the program, it immediately crashes and asks me if I want to send an Error report.
I removed and reinstalled and rebooted about 3 times to no avail. I re-downloaded Itunes + quicktime just in case there was something wrong with the installer. This did not fix the problem.
I then tried messing with my "sound" settings as suggested by support and people on the forums. I can not find the option to change my sound output to 1400000khz or whatever. Nor does changing my system to "Speaker mode headphones" fix the issue as suggested by apple here:
http://docs.info.apple.com/article.html?artnum=304318
Quicktime is also screwed up and will not load on websites. It shows an icon in my taskbar but when I click on it, nothing happens. Even if Itunes is uninstalled, the icon still shows up in the tray. I cannot delete the folders or find any option in Uninstall programs to remove it.
As a last resort, I rolled my system back to Monday when I had just installed Windows, default drivers and SP2. A clean system. I then installed Itunes as the very first program and surprise - it crashed upon opening.
I have no idea what to do at this point. Without Itunes my ipod is almost usless.

The quote below is from a previous thread where several people solved your same problem with the stated technique. Maybe it will work for you. Good Luck.
iTunes 7.0.2 FIX ("Have tried all 'fixes' suggested but iTunes STILL not opening").
1. Uninstall iTunes and QuickTime.
2. Do a search in the C:\ drive for "QuickTime". Delete EVERYTHING that pops up.
3. Restart the computer.
4. Install QUICKTIME ONLY
5. THEN install iTunes......and IT WORKS.....Just remember to install QuickTime FIRST.

Final Cut will not launch and desperate for a solution

My Mac locked up when I tried to reboot and I had to press the on/off button to reboot it.
When it rebooted, it would not mount the two G-Raid drives. When I took out the Firewire lead from the Sony tape deck, the G-Raid drives appeared on the desktop. If I plug the firwire lead back in, I cannot open the raid drives, but if I remove it, I can open them and see the contents.
If I leave the firwire lead out, when I launch FCP it says it cannot find the firewire device. If I click continue, FCP just doesn't launch. If I plug the firewire lead in for the tape deck, then it still does not see it.
I have tried doing the same thing with a different lead, and using the camera directly, but that gives me the same problem. It looks like a firewire connection problem, but I've tried two different firewire ports on the computer. It's a holiday weekend in the UK and I've got to get the job finished for Tuesday! Desperate to resolve this issue.

Alan
Have you tried the basic maintenance procedures?
repairring permissions
deleting preferences
running disc utility applications; techtool or disc warrior
''My Mac locked up when I tried to reboot''
why did you do a reboot in the first place - were you installing software?
if so - try deleting the application to see if it has interfered with the system
I have G Raids, they are on a separate firewire bus from my VT deck:
G Raids are connected to a Firewire 800 card and the VT deck connected to the system Firewire port
Many users report poor performance or drives unable to mount when connecting the VT and drives to the same bus
regards

Logic will not launch after I installed OSX 10.4

When I click on logic it keeps giving me a error message ( logic has unexpectedly quit) I have also updated logic w/ the latest update. What could be the problem?
this is the error
Date/Time: 2006-08-15 22:51:07.390 -0400
OS Version: 10.4.7 (Build 8J135)
Report Version: 4
Command: Logic Pro
Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Parent: WindowServer [63]
Version: 7.1.1 (7.1.1(885))
Build Version: 5
Project Name: LogicUpdate
Source Version: 1030000
PID: 331
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000020
Thread 0 Crashed:
0 <<00000000>> 0xfffeff18 objcmsgSendrtp + 24
1 com.apple.AppKit 0x93844160 -[NSProgressIndicator dealloc] + 332
2 com.apple.AppKit 0x936d94b4 -[NSView release] + 200
3 com.apple.Foundation 0x9291c968 NSPopAutoreleasePool + 536
4 com.apple.logic.pro 0x004d82ac 0x1000 + 5075628
5 com.apple.logic.pro 0x0022d324 0x1000 + 2278180
6 com.apple.logic.pro 0x00122af4 0x1000 + 1186548
7 com.apple.logic.pro 0x002f1fc4 0x1000 + 3084228
8 com.apple.AE 0x914f8960 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 208
9 com.apple.AE 0x914f87fc dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
10 com.apple.AE 0x914f8654 aeProcessAppleEvent + 284
11 com.apple.HIToolbox 0x931e8eb0 AEProcessAppleEvent + 60
12 com.apple.HIToolbox 0x9322cb24 ProcessHighLevelEvent + 140
13 com.apple.HIToolbox 0x9322ca7c StandardApplicationEventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 328
14 com.apple.HIToolbox 0x931e5554 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 692
15 com.apple.HIToolbox 0x931e4cac SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
16 com.apple.HIToolbox 0x931e4b28 SendEventToEventTargetWithOptions + 40
17 com.apple.HIToolbox 0x931ebe9c ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 704
18 com.apple.HIToolbox 0x931e57a4 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1284
19 com.apple.HIToolbox 0x931e4cac SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 372
20 com.apple.HIToolbox 0x931eba60 SendEventToEventTarget + 40
21 com.apple.HIToolbox 0x9322c7a0 ToolboxEventDispatcher + 92
22 com.apple.HIToolbox 0x9322c72c HLTBEventDispatcher + 16
23 com.apple.HIToolbox 0x9322ace4 RunApplicationEventLoop + 148
24 com.apple.logic.pro 0x002f8ee0 0x1000 + 3112672
25 com.apple.logic.pro 0x001237b4 0x1000 + 1189812
26 com.apple.logic.pro 0x00005ae8 0x1000 + 19176
27 com.apple.logic.pro 0x00005918 0x1000 + 18712
g5 Mac OS X (10.4.7)
g5 Mac OS X (10.4.7)

If you went from 10.3 to 10.4x you need to install proapps 3.1 for Tiger or what ever the latest proapps version apple has. It helps the stability of their "proapps".
If you havent's it's a good place to start.
Noah

Aperture (2.1.2) will not launch after 10.5.6 installed

Quite possibly this problem happened because of something else I did. However I just now noticed today that Aperture will not launch after I installed 10.5.6 last week. This is the first time I tried Aperture since I updated.
Help! This is VERY important to me as I do all of my photo ediing these days with Aperture. I have a couple of thosand photos waiting .
Is it possible to download a new copy of Aperture? Yes, I am a registered owner and first paid the full $300 for this app.
Any and all help most appreciated.
Ken

Ken
try going through the application maintenance steps. You mentioned that you ran repair permissions prior to installation, this needs to be run AFTER any application install. As it could be any number of things causing the issue I have listed in sequence some steps to take for trouble shooting/maintenance.
1. Repair permissions on system drive and drive with application on it.
2. Verify and repair the disk with the library on it. If on your system disk run verify to see if it needs repair.
3. Remove the application preferences found here:
system disk/users/users/library/preferences/com.apple.Aperture.plist
•test application
4. CMD+OPT when clicking on the Aperture icon to launch it and choose consistency check
•test application
5. CMD+OPT and choose rebuild library
•test application
6. Remove any installed plug-ins from following directories
system disk/users/users/library/application support/aperture/plugins/
system disk/library/application support/aperture/plugins/
•test application
7. Hold the Option key down and launch Aperture and see if you get the option to create new library or choose library, try both of these steps.
Tony

Photoshop CS4 will not launch after installing Yosemite.

Photoshop CS4 will not launch after installing Yosemite. All the other CS4 apps open. I upgraded Java. Genius Bar could not get it to launch.

Here's the fix I found, by way of an explanation...
Snow Leopard prompted me on my first startup with the following error:
"There is a conflict with the _______ font file. This font file contains a font name that conflicts with a system font required by Mac OS X to display onscreen text. You should move this font file to the Trash."
The fonts it said were conflicting: Helvetica, HelveticaNeue.dfont, Lucida Grande, and Monaco. I figured Snow Leopard probably wanted to replace these fonts with newer versions, and so I clicked "Move to Trash" on all four.
Apparently 10.6 trashed these fonts but didn't replace them. This was causing Photoshop to crash on load.
So I restored my ~/Library/Fonts folder from a backup made just before upgrading and this time after a reboot I said "Allow Conflict" on all four dialog boxes and launched Photoshop... everything is back to normal!
Not sure what kind of "conflict" it's referring to, but apparently moving these font files to the trash as OS X prompted me to do broke a number of apps. Should I report this as a bug?
Thanks for the ideas!

Lync mobile app will not launch after upgrade to lollipop on HTC One (M8)

Lync mobile app will not launch after upgrade to lollipop on HTC One (M8). Is this a known issue or is a fix available?

Hi THGutz,
Did you install the latest version of Lync for Android ?
The current version of Lync for Android is
5.5.3.8935.
I don’t test it on M8, but on other Android 5.0 devices it works fine.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Final cut studio not launching

I am running my final cut studio 5.1.2 on a macbook pro
2.16ghz intel core duo. 2 gb of ram.
My problem is that all of a sudden final cut does not launch. I simply
click on either the project I am working on or from the appocation folder
and does not even open up. I trashed my preference, repaired disk permission and even reinstalled. Nothing happens. I wonder if I need to do a complete
re-install, meaning wiping everthing out including dvd studio,motion,etc
and then re-install. Any suggestions. I was currently working on a HD project
when this happened.

See if any of these help:
http://docs.info.apple.com/article.html?artnum=301838
http://docs.info.apple.com/article.html?artnum=304477
http://docs.info.apple.com/article.html?artnum=93984
(That one refers to FCP HD, but might still help with 5.1.2)
http://docs.info.apple.com/article.html?artnum=304456

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

Hello, my iphoto on my mac OS X Version 10.5.8 will not launch after talking with an apple support tech. She had me sinc my iphone to my mac desktop and my photos downloaded from my iphone and were at the bottom. Now the iphoto will not launch.

My iphoto app will not launch after talking with an apple tech support who had me sync my iphone 4S with my mac desktop. The pictures downloaded from my iphone and after disconnecting from the Apple help, my iphoto had disappeared from the very bottom of the screen and will not launch. Can you help me retrieve my pictures. They are still on the computer.

Any help here:
http://support.apple.com/kb/HT2638?viewlocale=en_US&locale=en_US

Fireworks cs4 will not launch after accepting license agreement

fireworks cs4 will not launch after accepting license agreement

<user_name> = Your User Name:
in XP:
Application Data Path:
C:\Documents and Settings \<user_name>\Local Settings\Application Data
Fireworks CS4 Preference Folder Path:
C:\Documents and Settings \<user_name>\Local Settings\Application Data\Adobe\Fireworks CS4
Delete the Preference folder and re-launch FW.
Note: They are hidden folders, you need to uncheck the 'Show Hidden Files' and "Hide System Protected File" in Folder Options > View.
-- Sag-e-Attar Junaid Atari

Final Cut will not open up? Help

Hi all,
I have many projects on in final cut pro. I went to open it up this morning and final cut will not open. I see it trying to load and then it does not open. Can anyone please give me any ideas on what the problem might be.
Thanks,
Wildmangoose

Well, you first need to determine whether it's Final Cut that won't open, or just one project. To determine that, you can either trash the preferences or create a new user Account and log into it, then try opening Final Cut from the new Account.
If it opens, then you know FCP is OK. If you've done that with a new Account, then log in to your original Account, and take the media volume offline. I'm assuming you have all your media on a separate volume from your boot volume.
With the media volume offline, try to open that project in Final Cut. If it opens, then you have a corrupted media file, either a captured file or a rendered file.
You then then to find the corrupted file by the process of elimination. More on that later. For now, try the first step and report back.

ITunes will not launch after upgrade--click, bounce bounce, nada

iTunes will not launch after upgrade--rebooted nothing--2 bounce icon
then shut down all and unplugged, restarted--no change, iTunes still will not launch after upgrade
iTunes current version
on imac w/10.6.8

I have the same issue.
Allready uninstalled iTunes and reinstalled it, but the same problem occurs.
Icon keeps bouncing, and all that's visible is the first menu-item in the top menu bar, named iTunes. Nothing is clickable though.
The iPhone Configuration Utility doesn't seem to work either, it crashes on uploading an app to my iPhone. I guess it's using some of iTunes' libs or something.
Does anyone know how to get iTunes working again? I'm getting pretty desperate over here...
Thanks!

Final cut will not shut down stays in the dock and I have to reboot

Final Cut will not shut down ..... stays in the dock and I have to physically reboot

Maybe I'm misunderstanding what you mean by stuck in Dock.
You reboot your Mac. Is FCP trying to open automatically (the icon bouncing)? Or is it just visible in the Dock?
Russ

Final cut will not launch after fcs2 install (successful)

Similar Messages

Maybe you are looking for