Final Cut won't capture from the DVX100b? How do you remove 2323 pulldown?
I connected the DVX to Final Cut and loaded Log and Capture. When I click capture Now, the black final cut screen just hangs and it maintains saying "waiting for timecode ... must be in vtr mode" The camera is in VCR mode. I'm able to look through the tape from the Log and Capture screen but it just hangs when told to actually capture?
Also, I have footage in regular 24p mode, but I don't see an option to capture and remove 2323 pulldown, only 2332 which is only for 24pA?
Thanks!
If you want to mix 24P and 60i in a timeline, DO NOT remove pulldown. 24P with a pulldown plays nicely with 60i. Straight 24fps won't go into a 60i timeline without smearing or adding a pulldown. 60i won't go into a 24fps timeline without mushing the frames together. Not pretty...
Patrick
Similar Messages
-
I downloaded a trial version of Final Cut Pro X directly from the Apple website but when i try to open the file, a message is displayed saying 'legacy file should be converted' what can I do to fix it?
Where did you download it from exactly? URL.
Exactly what computer is this. -
once you have downloaded ESX24 sample packs from the internet how do you get them on to logic so you can use them ?
Mac App Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4928 -
You know how you download apps, well let's say you have two devices and get an app on one and it goes to the other, how do you remove it from doing that?
Click here and use the instructions to turn off the automatic downloads.
(120206) -
Well, just got a new camera: the fit-for-a-king Canon DV-200. I know it ain't much, but when you're a high-schooler film production company, it works for the budget. Anyways, I have managed to get as far as connecting it via firewire to the iMac G4, but I can't seem to capture it. I go to the capture window, and it recognizes the camera's existence ("VTR Okay"), and the cam is on VCR mode, and I have turned off the cam and FC and turned them back on again, and I can't capture any way I try. Suggestions, sil-vous-plait?
Hi there I was hoping you might be able to help me. I had some trouble capturing into FCE from my sony camcorder, but am now able to capture from recent dv's, however when I try to capture from my old dv's the preview is disabled and I am stuck.
The only difference I can see between the old and the new footage is that the older footage was shot in SP mode and the new in LP.
Any ideas?
Rupert -
how do you uninstall software downloaded from the net eg. Olympus software?
This free app uninstaller seems to work well:
http://appcleaner.en.softonic.com/mac -
My daughter had my phone hooked to a computer while on Facebook.The images apear to be friends profile pictures
Try doing the reverse instructions http://www.iphonestuffs4u.com/how-to-sync-facebook-contacts-to-iphone/
-
FINAL CUT WON'T ON ON MORE THAN ONE COMPUTER ON A NETWORK
I have a Mac Pro, a MacBook Pro, and a Powermac G5 all connected via airport. I am using all three computers to do video editing using Final Cut Studio, but if I try to open Final Cut on more than one computer at a time, I get an error message syaing that there is already an application running on this network with the same serial number. If I disconnect the computer already running Final Cut from the network, then the other computer will open it, but I need them all connected because I am sharing different photo/music/media files between all three computers. I Paid for Final Cut Studio, and I don't see why I can't use it on more than one computer at a time. Is there a way around this without disconnecting them from the network?
I Paid for Final Cut Studio, and I don't see why I can't use it on more than one computer at a time.
Actually you licensed Final Cut Studio and agreed to the license agreement when you installed those programs.
As it states:
"2. Permitted License Uses and Restrictions.
A. Apple Software
This License allows you to install and use one copy of the Apple Software on one Apple-labeled desktop computer and one Apple-labeled laptop
computer so long as both computers are owned and used by you." -
HT1338 why I can't do capture from the camera in final cut pro x?
why I can't do capture from the camera in final cut pro x?
why I can't do capture from the camera in final cut pro x?
-
Older version of Final Cut still captures fine. Still in Snow Leopard so that we have capatability of older Final Cut to continue capturing with, but are up to date on all drivers from Tascam for the card.
Older version of Final Cut still captures fine. Still in Snow Leopard so that we have capatability of older Final Cut to continue capturing with, but are up to date on all drivers from Tascam for the card.
-
How to create an install cd with the final cut pro x app if the app comes from App.Store?
Just copy the Application FCPX to your CD. When you want to install drag the FCPX to the Application folder and you are done.
-
Final cut won't export the correct settings for MXF videos
I have final cut 10.2 and compressor 4.2. My video footage is DSLR media shot at 1920x1080 at 29.97 in Mpeg format. I create an NTSC timeline that is 29.97 and 1080P and I can import and edit with this no problem. My issue is i want to export as 1080i29.97 XDCAM HD 422 50 Mbps in MXF format.(their is a preset for this in compressor) What i get is an mxf file that is 720x576 at 25 FPS and the picture is squished. I added the destination through Final cut to compressor and selected the preset i want. I also checked the preset and the settings are correct. You can see from the picture below.
However when i select this destination from Finalcut 10 it shows in the settings that it is 1080i and also 720x576 on the same page! You can see from the image below that the title of the destination is "1080i29.97 XDCAM HD 422 50 Mbps" and below that it says 1080i, 8ch 24bit mono tracks. But at the bottom of this menu it says 720 x 576 | 25 fps!
if i export as a master file this does not happen, even if i choose XD CamEX 50Mbps. Any help is appreciated. Not sure what is going on. ThanksWhat player are you using for playback?
Did you update the Pro Video codecs?
My export is showing this
and the output shows this -
Final cut won't recognize my camera
Hello. My Final Cut HD 3.0 won't recognize my brand new Sony 1080i HDV camera. I realize my final cut software probably pre-dates the camera. How can I fix it so I can capture video from this camera? I'm sure there's an answer buried someplace right before my eyes-- but I don't see it. Thanks.
update to fcp 5.1
x -
Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one. I found Final Cut now loads but each of the backups and files in the previous 3 versions won't load. I've worked on the project for 3 weeks. Im suprised the backup files won't load either!?! I've only rendered 1 low res version. I am thinking I will have to rebuild the project in Final Cut 7. That is simply too risky to have all my back ups not load up!!
I'm a little confused by this?
Final cut now opens if launch older projects. But if I actually click on the project it crashes. Im not sure what you mean by events? I've moved them from the events folder.
but when I open up and of the projects the FInal Cut opens but then wont load the project even with no events in the FInal Cut Events folder. -
How do I stop Final Cut Pro 10.1 from introducing artifacts?
How do I stop Final Cut Pro 10.1 from introducing artifacts?
Can someone please tell me what do do differently so that my edited video does not develop artifacts that were not in the original camera file. My Sony HDR CX900 produces crazy detailed XAVC S video that FCPX seems to import with no problem but FCPX is introducing artifacts: some on import and more on share. The artifact in the examples below appears above and below the horizontal rope line on this model boat. Please look closely. It doesn't look to bad here, but it dances on my screen. Also, the video generally degrades much more than I would have hoped. How can I get more professional results? Sorry for the long post, but more information now might save time and questions.
Below is a portion of a frame opened in quicktime directly from camera's card.
Below is the associated Inspector for above frame
Here is the same after it is imported into FCPX. Optimized and Proxy Media were created, but FCPX seems to select what to play so I can't tell you which one is shown here.
Here is the associated Inspector capture from FCPX.
Here is the same frame once again after it is Shared as ProRes 422. Note the horizontal lines above and below the rope lines on this model yacht.
Here is Inspector for the above file.
Here is the same once again after it is Shared as H.264 Better Quality.
I tried converting to Proress with 5Dto RGB and Brorsoft Video Converter. They both went though the process, but introduced similar artifacts.
How can I get more professional results?
And here is the associated Inspector for the above video.
I tried converting to Proress with 5Dto RGB and Brorsoft Video Converter. They both went though the process, but introduced similar artifacts.
How can I get more professional results?Russ H.
When I right click on the clip in the browser and select Transcode Media, the dialog box opens, Optimize Media is checked, but OK is greyed out. Transcode is not an option. I think this points to the fact that FCPX is doesn't need to transcode XAVC-S or FCPX can't transcode XAVC-S. This is a new Sony codec produced by the new HDR CX900. The codec is HD at 50Mbps.
Tom Wolsky,
I selected Optimized Media in the viewer and both the timeline and exports (422 and H.264) look great.
The 24 second long exported video jumps a couple of times as if skipping a frame, as it plays. Could this be related to 29.97 instead of 30fps?
Thank you so much for getting the image right. Now if I can just eliminate those couple of small jumps.
Maybe you are looking for
-
Please help - this computer already associated with an apple id
We have 5 family members all using the same mac, each with their own login and password. Each person also has a seperate apple id/ itunes account - and we want to download all the music onto the hard drive. When I go to do that for one of my daughte
-
3002 Code: iPhone isn't recognized by iTunes.
My installation crashed while installing iOs5 and I received a 3002 message. Now my iPhone will only restart itself (show apple icon and skinny thing) and the device is not recognized by iTunes. Suggestions?
-
Hello, I have an iPod touch and it don't has light or brightness. I can see the icons and use it but can get it work properly. I went to settings and the brightness is adjusted tu full level. Any idea?
-
How to use conditional success Screen in SMP2.3 HWC?
Hi All, Do anybody have reference for conditional success screen, I gone through this link SUP 2.2 Conditional Navigation Issue but i didnt able to do how to use conditional success Screen. If anybody have reference please provide me. Regards, Srav
-
Resources getting deleted when trying to add at run time
Hi All, When i am trying to add resources to another file at run time, some of the earlier resources are getting deleted. Please find the source code below: void CResourceIncludeSampleDlg::OnBnClickedButton1() CString strInputFile = _T("C:\\SampleDat