Final cut won't export the correct settings for MXF videos

I have final cut 10.2 and compressor 4.2. My video footage is DSLR media shot at 1920x1080 at 29.97 in Mpeg format. I create an NTSC timeline that is 29.97 and 1080P and I can import and edit with this no problem. My issue is i want to export as 1080i29.97 XDCAM HD 422 50 Mbps in MXF format.(their is a preset for this in compressor) What i get is an mxf file that is 720x576 at 25 FPS and the picture is squished. I added the destination through Final cut to compressor and selected the preset i want. I also checked the preset and the settings are correct. You can see from the picture below.
However when i select this destination from Finalcut 10 it shows in the settings that it is 1080i and also 720x576 on the same page! You can see from the image below that the title of the destination is "1080i29.97 XDCAM HD 422 50 Mbps" and below that it says 1080i, 8ch 24bit mono tracks. But at the bottom of this menu it says 720 x 576 | 25 fps!
if i export as a master file this does not happen, even if i choose XD CamEX 50Mbps. Any help is appreciated. Not sure what is going on. Thanks

What player are you using for playback?
Did you update the Pro Video codecs?
My export is showing this
and the output shows this

Similar Messages

What are the correct settings for the Canon 5D mark II in FCP 7 ?

I am shooting full HD at 23s97 fps.. tried making a preset for the Canon but when I import fils FCP always wants to change to appropriate settings for this file type but doesn't tell me what that is...
(latest firmware installed)
Please, can someone provide all the correct settings for me?
And also, why doesn't the camera show up on the desktop/in the menus when attached to the mac? I have ro use EOS utility every time I want to get anything off of the camera... and FCP doesn't see it either. That's just not right - FCP MUST recognise my camera!! : (
Please help - I don't want to start editing until I have the right settings for this footage.
Thanks
Jim

Welcome to the Boards
Not sure what you mean with the following, looks like a word dropped?
I have ro use EOS utility every time I want to get anything off of the camera...
Anyway, some more specs on your system could help point where the issue is. With the new Plug-In by Canon you can Log & Transfer from the Flash Card (not sure how you connected the camera.) Alternatively you could just drag the files in (but make sure to keep all files such as THM in case you use Log and Transfer later.)
Generally it is best to transcode to Pro Res to be able to work with the files in Final Cut. (Log & Transfer should do that, or using Compressor/Mpeg Streamclip.)
It (Final Cut) is probably changing the timeline to match the codec, or depending on your last preset used, just switching things around. In other words if you were editing in DV and had a set up for that, new sequences would default to that and if you try to ad anything else you will get the message.
Take a look at the search over there -> to look for the Canon 5D threads for some more info.
What I would do is just pull one of the clips in to start and look at what the sequence settings are aftr Final Cut changes them for you - they should be fine generally, though you will want to change Codecs to Pro Res.
I like just batch conversion of all my clips from the 5D Markk II and then work from there. (I do not hook up the camera to the computer, just use a card reader.)

Which are the correct settings for gmail in MacBookPro

I want to use mac mail to access my gmail. Can I ? instead of going directly to web to access my gmail.? Which are the correct settings for the incoming and outgoing servers ?

Hi,
Yes. You can absolutely access your Gmail account from within either Mail or Microsoft Outlook for Mac. Make sure, that you have enabled POP/IMAP in your Gmail settings, then follow the instructions here: http://mail.google.com/support/bin/answer.py?hl=en&answer=180188 if you wish to access your account via POP3 instead of IMAP, change the incoming mail server to pop.gmail.com
Regards,
Gábor

HT1277 i have all the correct settings for my e mail but i can't send for some reason it keeps taking my outgoing server offline

i have all the correct settings for my e mail but i can't send for some reason it keeps taking my outgoing server offline can anyone help

If you can receive mail and your connection to your ISP is otherwise working, but cannot send mail, then your SMTP settings are incorrect; the SMTP server port is wrong, your SSL setting is wrong, or the username or password credentials don't match what the ISP has, or your attempted accesses are being blocked or your ISP SMTP server is offline.
And in general, don't use port 25 for your outbound mail, unless your ISP specifically requires that; these days, that port is best left to communications between mail servers and (usually) not used by any mail clients.

What are the correct settings for my WRT54GS for using remote access on a Windows Home Server?

I can not remotely access my Windows Home Server from outside. What are the correct settings for my WRT54GS?

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

My final cut won't export

hello
my final cut pro x version 10
i can't export from project
after i downlowd new version os x version 10.9.1
i can't shre my film

What happens when you try to export? What export options have you tried?
Go to File->Share->Master File...
What happens? Do you get an error?
We need more information to be able to help.

Anyone have the correct settings for iCloud in Outlook 2011 with OS X 10.7.2 ?

I have tried setting up iCloud in my outlook 2011 on my iMac. I get an error "[AUTHENTICATION FAILED] Authentication failed] Your username/password or security settings may be incorrect.
I have tried several posted settings, for example:
Incoming Server: imap.mail.me.com
Checked Use SSL
Port 993
Outgoing server: smtp.mail.me.com
Checked Overrise default port
Checked Use SSL
Port 587
I have also tried adding p99- in front of both server names, still didn't work.
Anyone have a solution?

Julian Wright wrote:
Here are Microsoft's own instructions for setting up iCloud email in Outlook for Mac:
http://support.microsoft.com/kb/2648915
Just an FYI Julian, Unfortunately in that document MicroSoft have given the Mobile Me server addresses so it doesn't work with iCloud.
If you substitute iCloud server addresses (imap.mail.me.com etc) these instructions work.

Firefox 3.6.16 won't keep the "custom settings for history", thus causing page-load issues - any clue how to make it "stick"?

Ever since I updated to Firefox 3.6.x I am getting constant page-load errors on apps in Facebook. I've cleared the history, the cache, cookies... and will literally set it for the "custom history settings" in my tools/options/privacy tab, reload the page, it's fine. I go to another page and come back to the app (same window) and get the error message again. Back to tools/options/privacy and "Remember History" is showing, rather than the custom settings. This is happening incessantly.

I also have this problem and it just started in the last week or so. It seems to be dependent on my home network and the problem only exists with firefox. I have used chrome and IE8 with no issues. I can verify tomorrow that it only exists in my network but one thing I was able to test is that the problem exists even on my linux boot. I am totally dumbfounded with this problem and I can't find anything that will allow the gmail page to load. All other pages I have tried load fine, all be it a little slower than normal but they load. If anyone knows of a difference between firefox and all other browsers on how it goes through the router I would appreciate the info cause I don't know of any differences.

Correct settings for flv video

I have a bunch of videos, which I exported from Premiere pro CS5.5 to mp4 files. After this I used the Media Encoder to encode those videos to flv-files. The I opened Flash pro CS5.5 > import video > publish as swf and html. Same settings in the Encoder and Flash but still only half of them work. Those sites / videos that don't work just load and load, but nothing happens. Only option I have so is to encode them again from mp4 to flv using different settings to find ones that work. Sometimes bitrate encoding should be CBR, but sometimes it's VBR. For some videos I should encode alpha channel and for others there is no need. This is so frustrating. I'm using a whole day with this trial & error thing. It's hard for me to believe, that encoding settings should have such effect on the outcome. Could someone please help me with this one?
Example of an non-working site http://ok-opintokeskus.fi/tapahtumavideo2/jalkitoimet/jalkitoimet.html
and a working one http://ok-opintokeskus.fi/tapahtumavideo2/toteuttajatyhteistk/toteuttajat_yhteistk.html

Graficozzo
If you have 1920 x 1080 60i that 60i is not 60 frames per second but rather 60 fields per second. Consider that the same as 29.97/30 interlaced frames per second.
So, you want the Premiere Elements 11 project preset to be
NTSC
AVCHD
AVCHD HD 1080i30
but if you have 5.1 channel audio with your video instead of stereo, then you want to use the project preset
NTSC
AVCHD
AVCHD HD 1080i30 5.1 channel
When you drag your video for the first time to the Expert view Timeline, the project should set this project preset for you based on those video properties. You can check what it has set by looking at Edit Menu/Project Settings/General and the reading for Editing Mode, Timebase, and Frame Size. If it does not set the correct project preset, you can do that manually with File Menu/New/Project before you import you video into the project.
Please review the above. If you have any questions or need clarification on anything that I have written please do not hesitate to ask.
Thank you.
ATR

What are the best settings for Youtube videos using Camileo X200

What is the best video settings for the x200 for youtube videos. 720p-30/ 720p-60/ 1080p-30 .
Thanks

Hi
In my opinion the 720p-30 is good enough for Youtube.

Finding the correct settings for your smartphone?

I recently spent many hours experimenting with settings. I then found that some websites offer you a service (I had to pay £1). Online I had to give details of my phone, its provider and wether it was contract or PAYG. They then send the settings to you in a text to your phone and a separate message with a pin. You put the pin in on your phone and the settings are transferred from the text to the settings area of your phone. My problems were solved!
I used "configuremyphone.com" No doubt there are other providers too.

It's jusy as easy and cheaper (free) to use your operator's website to do the same thing...
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Correct settings for editing videos in web format and Mov Export

Under Premiere CS3 it was possible to create a project based upon web resolutions i.e 1024x768 and after editing export it as a simple .mov file. Under CS4 this seems to have been totally removed and only video dimensions appertaining to the TV or Film are available with no reference to web resolutions at all.
I tried to open up a project file that I saved in Premiere CS3 in CS4 but this just results in the preview being blurred. If anyone has information on how to import a movie at 1024x768 into Premiere and edit it and then just export as a basic .mov file at the same size (1024x768) I would be very grateful, I have spent hours trying to work this out.
Dave Thurston

Dave,
What are the specs of your source footage? The more detail, the better.
That is what you will set your Project/Sequence to. For odd Frame Size and other irregularities, you will need to be in Desktop Mode and set everything according to your source footage. That's why I asked for details on what you are Importing. The format/CODEC will be important. If you do not know, then G-Spot will be your friend and tell you.
Good luck,
Hunt

What are the correct settings for my wireless-n router?

I was just upgraded at home with a Huawei HG8245 Fiber Optic Wireless-N router. The default Setting is:
WPA/WPA2 Pre-Share, TKIP/AES, Auto Channel and 20Mhz Channel Width.
I cannot surf past 10 feet from the router. I switched the Security to TKIP, and it goes to Wireless-G and I can surf all around my apartment. I did AES only, goes back to Wireless-N, and again the 10 feet issue. Selected WPA2 only...same thing.
Any ideas or solutions?
Paul

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

Correct settings for HDV capture

Hi. I'm using Premiere CS5.5. I went on a few forums to get the correct settings for HDV capture.
I can record the footage fine. However I saw a few things which didn't seem right.
After capturing the HDV footage, the file was a .mpeg file. Secondly, the clip was 1 hour and 10 minutes and
it was only 11.3 GB. Does this sound right? A 55 minute .avi file is 11.6GB. I thought a HDV clip would be quite a large size file.
If this dosen't sound right, is there somewhere I could go to, to check that my settings are correct? By the way I'm filming and capturing with a Canon XHA1.
The footage is 1080i. HDV. I've exported it and it looks fine. Just want to make sure I've captured it correctly and to the best quality.
Thanks for your help.

The HDV format was advanced by Sony and others to use the same miniDV tapes used for SD. In fact, your Canon XHAI can record and play either without changing the tape transport speed.
Your observation in relative file sizes is due to the fact that HDV is highly compressed (MPEG), whereas, SD (AVI) is not as highly compressed. This is one of the reasons folks (such as Harm) don't consider HDV to be an edit format, but just a delivery format.
Note that what Harm was saying is symantics--you capture an analog source through a capture card that digitizes it. When you transfer a image file from HDV or SD, it is already digitized, so a bit-to-bit transfer occurs.

Correct settings for DVD

Hi
I wish to know which are the correct settings for making a new project in imovie and then what to do for getting the best quality on DVD. (I use still pictures and video clips with music, transitions and effects)
Thank you so much.

ola
the correct format depends on the format your camera (PAL or NTSC - 4:3 or 16:9) meaning the project format should meet the camera format. pleas note that that format changes in iMovie/iDVD are effective only for new projects and cannot change existing ones. the dvd quality settings depend on the length of your movie and can be set in iDVD under preferences.
my movies are never longer than 30 min. so i set it to faster encoding and check background encoding ... i also tried with best quality once but frankly i can't see the difference
buona suerte & viva la mela

Final cut won't export the correct settings for MXF videos

Similar Messages

Maybe you are looking for