Final Cut x exporting different volumes

I have multiple nested clips in a single project. For some reason, when I export them individually through compressor (I'm using the same setting for each) They export at different volume levels. They sound and look the same in Final Cut so I have to check every single one once they've been exported and it's a nightmare. Anyone have any ideas? I'm using FCPX 10.1.1 and the latest version of compressor on Mavericks.

No ideas, but export one of the problem clips as a master file. Bring it into Compresssor and after processing, check the audio. Is it also a problem with that workflow?
Russ

Similar Messages

Every video put into Final Cut Pro exports in horrible quality regardless of format/settings.

Hello fellow Mac enthusiasts,
I'm having a problem which may or may not have been plaguing my studio since day one. Every video that we edit in Final Cut Pro exports in MUCH lower quality than it was when it was imported, not only that, the file size of the newly exported video is several times the size of the original. What I end up getting is a file too large for our clients to email around. We recently had a client come into our studio with a flash drive full of 15 second avi's no larger than 900 KB, he wanted a few of them edited together with simple cross fade transitions, and even a few seconds of dead space cut out. He needed them to be the highest quality possible for a powerpoint presentation he may now be unable to give. At first I exported them as Uncompressed avi's, best quality, thousands of colors, and no sound. The resulting file was not only blurrier, but now 260.5 MB!! And that one was with zero edits! The original was 803 KB and crystal clear. So after that I decided to try a few tests. We also produce a bi-weekly hour-long local television show, which looks fine on television but now I'm wondering how much better it could and should look. I've been exporting that out as a Quicktime, Apple ProRes 442 HQ, Interlaced bottom-field-first, zero filters, both compressor native and NTSC 720 X 480. I attempted this method on the client's original 803 KB with zero edits and not only did it export a completely unusable video compared to the original, but it was now 57.1 MB. What is going on here? Is Final Cut conspiring against me? I'm guessing it's something in my settings which I'll shamefully admit I know absolutely nothing about. Could anyone help a struggling video editor do his job?
Joey

Hey guys sorry it took me song long to respond it's been a busy week filled with many things not relating to final cut...
In response to David's post, the original file is indeed larger than 720X480, though it's dimensions are not available to see in the 'more info' associated with the file itself. By comparison, the apple pro res LT file I exported through final cut of the same avi file is 720X480, and looks significantly worse.
[URL=http://imageshack.us/photo/my-images/87/screenshotofavis.png/][IMG]http://img87.imageshack.us/img87/5421/screenshotofavis.png[/IMG][/URL]
This was after I created a new project, made the sequence settings into Apple ProRes lt 30p under the audio/video settings in Final Cut, and exported it as the same with 'current' dimensions (it was listed as 850X637, maybe that was the original?) Although I did have to render the original avi itself once it was placed in the timeline. I guess there's no way to know exactly what sort of avi my original file is so I can match my sequence to it? The 'more info' (to be fair im sort of used to 'properties') leaves something to be desired..
I guess my question is: what else can I change in my settings to leave the quality of the video intact, if anything?
Thanks everyone.

Why won't my final cut 7 export my entire :30 movie in pro res 422 60i

Why won't my final cut 7 export my entire :30 movie in pro res 422 60i?
And some transitions are not rendering properly.

Post this on the Final Cut Studio forum. This is the FCPX forum.

Final cut x - export and youtube

hi all. I am just trying to work out what has gone wrong here.
Using final cut X exporting using compressor.
here is my youtube chanel for info as well.
http://www.youtube.com/channel/UCy-etfi_vg_Cwkjz3zOAtPg
I just uploaded a video i created yesterday. I shot it in 1920X1080 @ 50 FPS, edited it in fincal cut, and exported it in compressor with the default settings for
HD 720. here is a copy of the information in the file.
Name: HD 720p
Description: HD 720p for upload to web sharing sites such as YouTube and Vimeo
File Extension: mov
Estimated size: 4.61 GB/hour of source
Audio Encoder
          AAC, Stereo (L R), 48.000 kHz
Video Encoder
          Width and Height: Up to 1280 x 720
          Pixel aspect ratio: Default
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls: Automatically selected: Off
          Codec Type: H.264
          Multi-pass: On, frame reorder: On
          Pixel depth: 24
          Spatial quality: 75
          Min. Spatial quality: 25
          Temporal quality: 50
          Min. temporal quality: 25
          Average data rate: 10.24 (Mbps)
Compatible with Mac
My question is that the output video is the quality I wanted, and have uploaded to youtube before, as you can see some of the other videos there, but when I uploaded this video (thank you video) the quality is jumpy and nasty and I am not really sure what happened.
I am also using the panasonic HC-V520m full HD camera.
any info would be great.

Hello Serenity99. In my rather limited experience with this, I have had much success with just copying and pasting the project from within FCP X. All of the properties (retiming, themes, effects, music, sound effects etc.) copy over exactly between the two, which is great. The only thing is that while the transitions and retiming copy over in the one go, you may have to go back and copy and paste any titles seperately as they are placed above the clips (well in my case they have been) but they will copy over nicely and as previously configured. I have not found this to be a big hassle at all. I was releaved to find that the process was as easy as it was. Mind you, I have not has as hiccup free a time with copy and pasting from other applications like iMovie to FCP X. Although I can select and copy the projects, all the other editing and rejiging has been jumbled and required much reworking. But if you stick to within FCP X it is easy as pie and works wonderfully.

Can't use Final Cut Express Export Using Quick Time Conversion with iDVD.

I am using iDVD 08v 7.0.4 and until 3 days ago I could import and create iDVD's using Final Cut Express export using Quick Time Conversion. There was an update that downloaded for iDVD. Since then, I can only use Final Cut Express Exports that is a self contained Quick Time Movie.
I have never had this kind of apple and apple problem. I am disappointed that I'm having apple issues like this.

Are you on latest 10.5.x release and latest FCE updates? Your info line says 10.5.1 and you didn't list FCE version. Not saying that will fix problem, but might help. You also might want to explain how you did your Quicktime conversion.

Self Contained Final Cut Pro Export Files unreadable in New Final Cut Pro 7

Has anyone come across this? I was using Final Cut Pro 5, created a self contained file of a current project 1.9GB in size. Uploaded the new version of Final Cut Pro 7 and upgraded to Snow Leopard, and now it tells me that this is unrecognizable as a movie file. Quicktime or Final Cut Will not open this file. I'm puzzled.

VideoJunkie88 wrote:
Has anyone come across this? I was using Final Cut Pro 5, created a self contained file of a current project 1.9GB in size. Uploaded the new version of Final Cut Pro 7 and upgraded to Snow Leopard, and now it tells me that this is unrecognizable as a movie file. Quicktime or Final Cut Will not open this file. I'm puzzled.
Hi VideoJunkie
I have not come across this. However, my previous FCP 6 Self-Contained Exported ProRes 422 standard (not HQ) files which are actually 1440 x 1080 will only playback in the new QT version 10 using that aspect ratio (whatever the actual screen ratio is at 1440 x 1080, I'm not sure, but the video width is squashed together... I suppose it has something to do with showing it in square pixels versus rectangle... or do I have that turned around. I'm not sure, I have always been confused about the ProRes 1440 x 1080 format, all I know is it plays back properly in 1920 x 1080 when I transcode it for DVD or ATV, iPhone etc..). In any case, you need QT player 7 (standard or pro version) to display these files at the intended aspect ratio of 1920 x 1080. The old QT Pro player version 7 will let you change this in the properties window, but the QT 7 standard player will not let you (those options are grayed out) and the new QT X player doesn't even show these options (i.e totally unavailable).
Also, these previous files will play just fine (for me anyway) in FCP version 7. If you having a different issue where they will not play at all, then I'm not sure how to help you, but I just wanted you to be aware that my old self-contained files from FCP 6 do work (for me anyway) in the new FCP7 under Snow Leopard.
(ADDED) I must ask, what codec were your previous exported self-contained QT movies? Do you have this codec on the commuter your trying to play your old master self-contained exports on?
Ron
Message was edited by: videocrafter

Final Cut Pro - Export to Quicktime Movie...

I am in a pickle. I have recently completed a project using Final cut pro 6.0 and wish to Export the project so I can create a DVD using DVD Studio Pro. I have also recently exported 3 sixty minute movies perfectly fine but for some reason this recent one wont.
The Settings I am using are - DV PAL 48 kHz Anamorphic (as Im using a 16:9 format) It starts normally and says Writing Audio and Video, then Estimated Time: About 2 hours, this goes up to '9 hours estimated' then begins. After 1% being completed it 'Unexpectedly quits.'
I can still export using Quicktime conversation and via compressor but want the quality and chapter markers. I cant figure out why is doing it especially seen as it was fine a few weeks ago.
I have tried it again and now im coming up with a message saying "The application Final Cut Pro quit unexpectedly. The problem may have been caused by the KGCore plug-in." Firstly what is that and is it a possible solution?
Please Help

LATEST UPDATE.
If i try and export one project it unexpectedly quits with the first problem, 0-1% done.
If i try and export a different project it come up with the second problem 'KG Core plug-in'
Both are from the same project just different sequences

Final Cut Express - Exporting problem

I have used Final Cut Express for years with no problems. All of a sudden, when I export my sequence into a Quicktime Movie, the resulting movie has intermittent problems with photos. ALL my movie clips work fine. However, random pictures “get stuck” and will simply remain on screen wiping out several pictures that follow. The sound continues correctly, but the movie remains fixed on a given photo. At some point, the movie goes back to normal and pictures and clips show correctly, until the same problem repeats itself.
I tried removing the software from my system and restoring from scratch but that did not help. The problem is also not with a given picture or transition, because if I redo making the movie the problem will usually display itself at a different location. Does anyone have a suggestion as to what might be causing this problem?

Dragging the photos to your timeline should work, though the normal route is to import them and then drag them from the browser. User-installed plugins are located in three different places:
FxScript Plugins:
User > Library > Preferences > Final Cut Express User Data > Plugins
Macintosh HD > Library > Application Support > Final Cut Express Support > Plugins
FxPlug Plugins:
Macintosh HD > Library > Plug-Ins > FxPlug
You should copy all user-installed plugins to a different location before reinstalling, then place them back in their respective folders afterward.

How to redownload final cut pro on different computer without installation disc?

I purchased a laptop that has final cut pro on it but it didnt come with an installation disc or anything. I need to put my final cut pro on a different computer...What can I do?

Final Cut Pro X is an app from the Mac App Store. There is no installation disc. Since you said it came pre-installed on your computer, I'm assuming that means you aren't able to go to the Purchased tab of the Mac App Store on a different computer to redownload it. Therefore, I would suggest using an external hard drive or FireWire or thunderbolt or USB connects,etc. to transfer the application between computers along with all the library files from the system library library and 'hidden library'

Final Cut Pro Export To You Tube blurry

Hello there
I have just finished editing an HD video using final cut pro. I output as a mater file and it looks great! Crystal clear!
I then tried to upload to YouTube, the 360 version (lowest quality) is very blurred but the HD version is crystal clear? Problem is most peoples YouTube will default to 360 or 420 and the video just doesnt look good? I have not had this issue before? I have used a different camera this time, that is the only diference I can think of? I have also tried the direct upload to YouTube from FCP with the same result. I would have thought this option would use the optimum codec for YouTube?? So disappointed as the video looks great and dont want a blurry video being out there??

YOuTube recompresses the video. Can you post a link to it?

Final Cut Pro exports very low quality video to DVD

I tried exporting a timeline to a DVD from Final Cut Pro X 10.0.3 today. Every clip in the timeline was 1080x1920, but the DVD export menu insisted (without offering an option to change settings) that Final Cut export at 720x480. The Blu-Ray menu offers 1080x1920 exporting, though. Is there any way to get the app to export to DVDs at 1080x1920?

Yes, you can create an AVCHD Disc which is basically Blu-ray quality on a cheapo standard DVD.
Select Share>Blu-ray and in the window that opens make sure the Output Device is your DVD burner, not the hard drive.
Note that you will only get about 35 minutes at the highest quality.
If your video is longer the data rate will be reduced but should still produce good quality hi-def up to an hour or so.
You must play the DVD in a Blu-ray player. It will not work in a normal DVD player.

Final Cut HD- Exports Audio only?

Well, I have had the best of luck with Final Cut Express HD- I am not sure why, BUT NOW, everytime I export a video (quicktime or .mpeg4) it only exports the Audio and No video.
I don't think I have have changed any settings, but if I have - how do I change them back? This is killing my business as I make short web videos for auctioneers.
What am I doing wrong- all of a sudden after two years all I can export is audio and no video?

Maybe you have inadvertently selected NONE in the video export options?
Al

IPhoto or Final Cut bug: export creates 19 stereo tracks attached to file!

I am exporting three slideshows from iPhoto '08 to Quicktime to be placed in a Final Cut Pro project. The first two exported fine. The longest one (just over ten minutes) exports and plays in QuickTime, but when you import to Final Cut, it mysterious has 19 stereo tracks attached, and won't play unless you remove all of those tracks (hence, no music) Again, the shorter two come in just fine with one stereo pair, as you would expect.
I installed the iPhoto update, tried again, still the same thing...

Ryan:
Is it just that one particular slideshow or will any slideshow exported and imported to FCP display that problem? Also, if you have Quicktime Pro, open the problem file with it and check to see if if contains those 19 tracks. If not, then maybe FCP is causing the issue.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Premiere Pro CC crashes upon XML import from Final Cut 7 Export

Hello all,
I have recently tried to import a FCP7 XML into Premiere Pro CC 2014, and a few seconds after initiating the export Premiere Pro crashes. Any solution to this???
I Exported on a Mac Tower running FCP7 and then imported the XML on a PC Running the latest Premiere CC v8.1. Could that be a problem in itself?
Also I'm considering a workaround where I move the FCP7 to FCPX, generate the XML then try importing again. Worth a shot?
Also trying this strictly on an Apple computer to import and save before moving to my main PC station. Thoughts?
The sequence I'm trying to import is fairly massive too, not sure if this is why, but it is mult-layered, both in audio and video and is running about an hour in length with several other blocks of video files after that, probably running up to 2 hrs. This should not be a problem, right?
Help! It would be greatly appreciated to get out of the clutches of final cut finally.

I am having the same issue.
Your best bet is to logon to Adobe website and go to customer support. If you chat with someone they can go on your computer and trash all your preferences. Your computer will be stable again. It worked great for me, but I just imported an XML from Resolve and it is crashing the system again.
Good luck.

IDvd 4.01 & QT/Final Cut Pro Exports, need advice

Hi,
In tests with small Quicktime exported movies from the timeline in Final Cut Pro 4.5 -- meaning NOT making a full, new self-contained QT movie but just a smaller "reference" file -- I was able to burn fine 2 and 5 minute tests.
When I got to a longer (45 min) completed FCP timeline, and tried the same thing (dragging the exported reference file to iDVD), I had problems. Ran it overnight, and in the morning it was still in stage 3, and when I tried to stop it the whole computer crashed.
It takes FOREVER for FCP to export a longer fully self-contained quicktime movie...I am wondering if anyone has any info/advice on whether idvd:
-- has trouble working with these QT 'reference' files when they have to use/
access rendered media in Final Cut pro.
-- If it is worth the time to make a fully self-contained "separate" quicktime
movie from Final cut pro before dragging it for iDVD to encode for DVD
Thanks
Brigitte

Hi B
Well a 45 min movie - to be coded as mpeg2 to a DVD disk takes time.
on a dual G5 2GHz - about 60 min
on a single G4 600MHz - about 10 - 20 hours
make a diagram and find out what would be relevant to Your set-up.
Yours Bengt W

Final Cut x exporting different volumes

Similar Messages

Maybe you are looking for