Final Cut X not recognizing EXTERNAL GTECH 2GB Drive

Hello,
So I just purchased FINAL CUT X and my external GTECH hardrive 2 GB is not being recognized. It does NOT show up on the desktop. I've browsed through a couple of forums and I think the MAC OSX could be the problem. Or that final cut X is configured to my computer's hardrive rather than my external. When I go into APPLICATIONS, UTILITIES, Desktop utilities I see this "APPLE HDD HTS547550A9E384 Media," which I believe is my drive because its using less the a GB of space last time I checked.

If the drive doesn't appear in the Finder sidebar under devices then the problems in the drive or the OS. How is the drive formatted?

Similar Messages

Font Families in Final Cut Pro not recognized

I was curious if there was a way to allow entire font families to appear in the text tool in Final Cut. Currently only the name of the family shows up and when it is seleced Final Cut seems to arbitrarily choose one of the fonts from the family to display. I have tried this with OpenType, PostScript, and TrueType fonts, and all of them have this same problem. I am also sure that the fonts are installed correctly, as they all show up without a problem in every other problem. In addition, I have tried it on multiple machines and all have the same issue. I have also tried computers with fpc4, fpc4.5, and fpc5, along with a variety of fonts.
Is this just something that final cut does not let you do? is there any way around this other than making titles in an outside program and bringing them in as jpgs or the like.
any help would be great
Thanks,
Tim

For copy-protection reasons, DVDs (the video ones) have a regional "code" - for example, North America is region 1, and Europe is 2 (grosso modo). Computers for the most part ignore this, but common DVD players don't - so a region 1 player refuses to play region 2 discs, etc.
In old times, I remember that DVD drives that came with Macs were set to some region (presumably according to where they were bought), and there was a way to change it, but you were limited to some 5 changes, after which the drive would be locked at whatever "region" it was in. I don't remember how that region was changed, but it does look like the region associated with the DVD drive in your mac did indeed change, so as to make it different from your local one.
Message was edited by: Luis Sequeira1

Final Cut Pro not recognizing Magic Bullet Quick Looks

Help! Lost my hard drive on my iMac, had it replaced, reinstalled Final Cut Pro Studio 2, downloaded MB Quick Looks again to reinstall. Final Cut is not showing it in the drop down effect menu like it used to. Can someone tell me how to configure FCP to see the MB QL again?

I can't remember what I did but I have a feeling it may be the penultimate suggestion on that list:-
+If you have recently re-installed your host application or OS, there may be a corrupt installation of one or both of these.+
I recall reinstalling the FCS 3 apps soon after the original instal but can't recollect exactly why! That is probably what got mine working again.
However, if you do reinstall FCP make sure you completely uninstall it first using FCS Remover
http://www.digitalrebellion.com/fcs_remover.htm

Final cut isn't recognizing external hard drives

Just bought new version of Final Cut and it will not recognize the external hard drive that I plug into my usb or the extra hard drive that I had installed into my laptop to do video work on for more space. What is the problem here?

WWhat computer? What drives? How are they comnected? How are they formatted?

Final Cut Express not recognizing firewire

I recently deleted my hardrive on my '04 iBook, and reinstalled all my software. I have Final Cut Express version 2.0.2, and upon reinstalling it, and firing it up for the first time, with my XL2 on and attached via firewire, the "External A/V" window pops up, and says "Unable to locate the following devices..." referring to the firewire connection. Now that always pops up when nothing's plugged in that's turned on, but this is the first time it's ever done this when my camera is plugged in and on. I went through every NTSC firewire setting on the "Easy Setup" window, but nothing changed. iMovie reads my XL2 just fine with the same firewire cable. This problem did not occur before I clean out my hardrive, and reinstalled everything. But prior to reinstallation my "capture" function was freezing up after 5 minutes, and said my "startup disc" was full. Any ideas on what the current problems is?

I'm experiencing the same problem. I have a macbook pro 2.4 GHz, using a Canon HV20. When I enter FCE is prompts me saying "Unable to locate following device: Apple Firewire NTSC." However using imovie, everything works fine, I'm able to capture images simply by turning on my camera.
Not sure if its a problem with my FCE, because I've tried to edit in FCE using video from imovie and it gives me an error message constantly.
any ideas?

Final Cut Express not recognizing P2

Running FCE on on my iMac, camera gets to desktop no problem. When I open log and transfer, FCE does not read the files. I am shooting on HPX370P, and installed the drivers from the disc but they are not staying in my applications folder. Help!!

Sorry, Final Cut Express does not support P2. Not DVCPRO HD nor AVCintra. Log and Transfer is for AVCHD formats only.
Shane

Is it possible to install Final Cut Pro on a External TB Hard Drive

I would like to buy an external TB drive for my iMac and was wondering if it is possible to just run Final Cut Studio and all of it's apps off of a TB drive?

No. The Final Cut Studio applications must be on the same volume as Mac OS X.
You can put the accompanying content, such as motion templates etc on another drive.

When I do log and transfer in final cut pro 7 from external hard it will not responding, and i will force quit from final cut, plz help!!

When I do log and transfer in final cut pro 7 from external hard it will not responding,
and i will do force quit from final cut, plz help!!
i have alot work to do plllllllllz help

Hi. Your FCP7 question should be posted in this forum. https://discussions.apple.com/community/professional_applications/final_cut_stud io
Good luck.
Russ

Audio And Video out of sync in Final Cut, but not in quicktime

I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
This is what I did to attempt to fix the problem:
- Check drives using disc utility and repair permissions
- Remove Final Cut Preferences using Apple guidelines
- Switch hard drives
- Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
- reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
- switch ram slots, and even replace ram with different sticks from another G4 machine
None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
Thanks

For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
Editing in FCP 6.0.2
QT was just updated to 7.3.1 the other day (hmm)
On an MacBookPro machine, OS 10.5.1
Software updater says everything's up to date of course.
DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
Grr,
Nicole
Editor, RHED Pixel

Final Cut will not open up? Help

Hi all,
I have many projects on in final cut pro. I went to open it up this morning and final cut will not open. I see it trying to load and then it does not open. Can anyone please give me any ideas on what the problem might be.
Thanks,
Wildmangoose

Well, you first need to determine whether it's Final Cut that won't open, or just one project. To determine that, you can either trash the preferences or create a new user Account and log into it, then try opening Final Cut from the new Account.
If it opens, then you know FCP is OK. If you've done that with a new Account, then log in to your original Account, and take the media volume offline. I'm assuming you have all your media on a separate volume from your boot volume.
With the media volume offline, try to open that project in Final Cut. If it opens, then you have a corrupted media file, either a captured file or a rendered file.
You then then to find the corrupted file by the process of elimination. More on that later. For now, try the first step and report back.

Final Cut to NOT open on older project every time

Is there a way to have Final Cut Pro NOT open on the last project all the time. Sometimes I just want it to open fresh without taking 5 minutes (exaggeration) to open the last project I worked on. Thanks so much!

I should have seen that. Thanks. Although what I really want is an option like when you open Aperture or iTunes with the option key held down you can select what library to open instead of the default. Usually I want it to open the last project but sometimes I don't and it is a pain to have to wait for it to open all the timelines and then close them all down again. I know..... I want I want I want. Thanks!

Final cut will not shut down stays in the dock and I have to reboot

Final Cut will not shut down ..... stays in the dock and I have to physically reboot

Maybe I'm misunderstanding what you mean by stuck in Dock.
You reboot your Mac. Is FCP trying to open automatically (the icon bouncing)? Or is it just visible in the Dock?
Russ

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

Rendering - Final Cut will not render clips under any of the 3 choices?

Final Cut will not render clips mov, or dv under any of the 3 choices, including stuff I have done before.

I realize your problem is solved, but I thought I would post this is case it might helps others in the future.
Under Sequence-->Render--> OR Sequence-->Render All--> OR Sequence-->Render Only--> make sure you have check marks next to all the different video types ("Needs Render", "Proxy", etc).
If there is no check mark, then the video won't render - and this can sometimes seem random, like what happened in your case.

TS4169 Final cut will not let open because "it unexpectantly quit while reopening windows. What do I do?"

Final cut will not let open because "it unexpectantly quit while reopening windows. What do I do?"

What version FCPX are you using?
Has it ever opened for you?
Russ

Final Cut X not recognizing EXTERNAL GTECH 2GB Drive

Similar Messages

Maybe you are looking for