Final Cut X not working properly

Hi!
In my office i am editing with a new IMAC OS X Lion. we bought final cut X three months ago and suddely, since one week, has been imposible to work on it because every time i move something in the timeline or import a pic or a video, whatever i do it takes ages until i can do another step further.
I have uploaded to the new version and checked other forums but i couldn't find a clear answer
If anyone has any idea how to solve this I would really appreciate it!!
thanks!!!

Here's my pet answer for this (very common) question - don't lose heart! It's an awesome application - you just need to see why it's not working well on your system.
First, check the spec of your iMac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Particularly your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Other ways to improve performance:
Create optimised media.
Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
Create folders in the Project library and put any projects you are not working on currently, in there. (Twirl it closed to hide them).
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
Do you have FCS or FC 7 installed on the same partition as FCP X - not advised by Apple.
What video codec are you working with?
Lastly, RAM - Although Apple claim much less is sufficient, I would recommend you run a minimum of 8GB (preferably 16GB) RAM in your Mac.
Andy

Similar Messages

Import from Final Cut Pro not working correctly

I have a very simple project in FCP. (Ver 6) It is a HD clip that is about 5 min long with 7 chapter markers.
I exported the project as an XML file and imported that into Premiere Pro empty project.
I wind up with two assets, a .mov with same name as the .mov in FCP and a sequence with the same named sequence in FCP.
Right clicking on the .mov and selecting "New sequence from clip" creates a new sequence with the .mov on the timeline.
There are no markers.
Right clicking on the sequence asset and selecting "New sequence from clip" creates another sequence with the same name and the .mov on the timeline.
The markers are inside the .mov and audio tracks, not up on the top ruler line where markers appear when manually adding markers.
The keystrokes to move to markers do not work.
The "Clear all Markers" function is greyed out , like it is when no markers exist.
If a "Dynamic link to Encore is performed, there is no markers in Encore.
If you enter chapter markers manually and look at the project file (an XML file) you will see indexes with the chapter points , durations and names as children named "Markers" with attribute"ObjectID='22'.under "//PremiereData"
Following , in sequential order, are subsequent objects "Markers", ObjectID='23" through "ObjectID=n
However, if you look at the project file after importing a FCP project, this same function occurs, except that it is "Markers" "ObjectID=30 with the indexes and marker data 31 through n (further down in the file). This area is empty when adding the markers manually in Premiere Pro.
FYI , the project file is littered with the word "Marker" and "Markers" throughout the file, only their attributes make any node unique.
I am at 99.9 &% finished with a VB program to create / modify nodes, values and attributes, except that the XML date changes format at the node named "//WorkspaceSettings" so I am not able to edit values to make a file that will not crash when opening.
I would very much like the import from Final Cut Pro to work, or someone explain how to work with the nodes under "//WorkspaceSettings"
Thank millions for a solution.

It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo. I had been using Final Cut Pro without any problems right until I upgraded to Yosemite. I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating.

Final cut pro not working with Yosemite

I yesterday installed Yosemite and the previous version of Final Cut Pro does not work with it. When I try to install the latest version of Final Cut Pro from the purchased tab in the app store, I get the message: "Final Cut can't be installed on this computer because it requires at least 4 GB of memory". When I go to the storage tab in "About This Mac", it shows that I have 154.49 GB free of 319.21 GB. Can someone help? Many thanks.

It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo. I had been using Final Cut Pro without any problems right until I upgraded to Yosemite. I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating.

Final cut will not work on my Imac

I've gone from a 5 year old mac book to a brand new Imac. My final cut express worked on my old mac book but is not working on my Imac. It is saying I need an AGP graphics card, what is this and can I add one to my Imac? Live type and soundtrack are working just not the actual final cut. Please no confusing computer terms as I don't understand half the stuff that is said in this forum! Thanks, Sammy.

I have the same problem. I can't load and save any movie - shortclip. I have tried several ways without succes.
I just bought FCE 4.0 and it's new to me. Nothing works for me. I'm still working in Quicktime.
My camera is Panasonic Lumix TZ7 - AVCHD. I can see my clips in preview but when I put into Sequence a "red hand" shows me "NO DATA". What am I doing wrong? I have also tried different setups i Preference.
(I have the book and DVD from Apple Pro Training Series - FCE 4, but when I follow the instructions it doesn't match what happens on my computer.

Sharing on Final Cut is not working on my computer

So, my school newspaper just got a new copy of Final Cut Pro X and it's not uploading a project onto a DVD or onto Youtube. In fact, now it's not excepting the username and password for our Youtube account. Anyway of fixing that?
-Haileybird15

This problem was intermittent for me a week or so ago. I have tried numerous times today and cannot upload any work to YouTube from fcpx due to the following error: Invalid username or password.
Having looked elsewhere, it would appear that Google are working on something that is having a temporal effect - though that could be mere conjecture. I would imagine that given a few days, either the problem will be fixed or the forums will be overloaded with complaints.
Can Apple test this?

Dvd created in final cut pro not working

I have created multiple Dvd's in Final Cut Pro X and never seem to have a problem. Yet with my most recent project I've run into a problem. The created Dvd's will not play on any of our dvd players, blue ray or regular player. The error message I am getting on some of them is "region not supported". But they will play on any Pc or Mac I insert them in. I burned the Dvd using the dvd function in Final Cut.
Any advise?

For copy-protection reasons, DVDs (the video ones) have a regional "code" - for example, North America is region 1, and Europe is 2 (grosso modo). Computers for the most part ignore this, but common DVD players don't - so a region 1 player refuses to play region 2 discs, etc.
In old times, I remember that DVD drives that came with Macs were set to some region (presumably according to where they were bought), and there was a way to change it, but you were limited to some 5 changes, after which the drive would be locked at whatever "region" it was in. I don't remember how that region was changed, but it does look like the region associated with the DVD drive in your mac did indeed change, so as to make it different from your local one.
Message was edited by: Luis Sequeira1

Motion (.motn) Template Inside Final Cut 7 Not Working

Hello,
I downloaded a free motion template (the file ended in .motn) that instructions with it say I can instal and use with Final Cut Pro. I am currently using FCStudio 3.
I was to instal in the following directory: Macintosh HD>Library>Application Support>Final Cut Studio>Motion>Templates
I did so. I opened FCP, the motion template was where it was supposed to be. But when I apply it, I get a solid white box. It's supposed to be compatible with both FCStudio 2 and 3.
I opened this file in Motion, and it worked (except it's supposed to be an opening and closing animation, and just the opening displays in Motion). But I'm supposed to be able to use this in FCP, so I'd like to ask here if this is something that really should be working in FCP, and if so, what fixes there may be.
Thank You!

Try this:
http://www.echomist.co.uk/software/fcPrefsManager.shtml

Compressor without final cut x not working

hi I just bought Compressor 4 stand alone (with out installing Final Cut X) and I can't get any window to start draging files to work on it. I installed it on a MacBook Air 1,4 gha Core 2 Duo... Do I need FCX to make it work? is it the MBA the problem? is it me?
Thanks

When the OP states dragging to any window, I'm confused, as you don't drag to any random window. You can drag appropreate files to the Batch window only. And what specific type of files are being dragged there?

Final Cut Pro not working with Snow Leopard.

Hello, folks, happy holidays and new year to you all.
I have just recently found out the FCP 5 (fully updated, but I don't know what the exact version is) is not opening. It bounces in the dock, and that's it. However, the other apps are all working fine, Motion, DVD Pro, and Live Type. Soundtrack Pro is working as well, but I also own that with Logic, so I don't know which version it is.
I'm on Snow Leopard 10.6.2, this is on my desktop. I have repaired permissions.
What I haven't done, is to see if it boots from my backup 10.5.8 drive, as well as see if it is working on my laptop. The reason I'm posting is to see if there is a known problem and easy solution. Thanks all!

Try this:
http://www.echomist.co.uk/software/fcPrefsManager.shtml

Final Cut Pro not working on OS X Lion?

Says my OS is not up do date which it is, any ideas what this could be?

You may need to contact the App Store directly, and ask.
Most macs that can run Lion can also run Mavericks. And Mavericks is free.
What model is your Mac? If it supports Mavericks, you should seriously consider it.

Who has Final Cut Studio 2 working perfectly?

Does anyone here have Final Cut Studio 2 working perfectly across the board? Meaning..All the effects, sound loops, templates, media...etc all show up with no problems except the occasional crash here and there.
I am about to reinstall the OSX from scratch to install Final Cut Studio properly. Also....I plan to install all of the option media on a seperate hard drive.
Any suggestions? Advice?

For starters, I know its an error on my part. I am not talking about isntalling an upgrade. I recenlty brought Final Cut 2 academic. I know Final Cut Studio when it comes to the actual editing process, I just need help with the installation process.
My Final Cut Studio is is still very very usable...I prodcued an entire pageant with it. I just want it to work perfectly. In Motion...some of the media is missing, in soundtrack, some of the music files are missing.
When I installed updates for Final Cut and Motion.....motion started crashing and certain effects stopped showing up in Final Cut. I solved the Fianl Cut Problem, but still have hte missing media problem in motion.
Also, I installed all the optional media on my internal hard drive. 120 to be exact. Now I am down to 2 gig of space.
I am goign to buy a portable hard drive and store the optional media on there along with video, render files, etc.
What I am asking is....for the people who have Final Cut Studio 2 working properly...can you guys tell if you installed any final cut studio updates...if so which ones....also, what version of the OSX are you guys running.
I am really not frustrated are mad....I know it's error on my part....now....I am trying to get it right.

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

Secondaries not working properly

We have two final cut system that we just updated to FCS 2, one system, a dual 2.7 G5 power mac, everything is working perfectly. The other, a Mac Pro quad 3ghz, the secondaries room does not work properly. When I select color ranges using the eye dropper and try to make adjustments the adjustments are made to the whole image not just the selection. When I use the other computer it works fine so I know it's not user error.
Any suggestions?
mac pro 3.0ghz Mac OS X (10.4.9) 2gb ram, dual 20"

Which garphic card you use ?

Hi ALL i have a BDC code it is not working properly

this BDC code is not working properly , when ever the file is transfering BDC is aborting in the case of   invalid material/batch comes into teh picture... so please could you ''Check for invalid material/batch combinations so they are not processed by the BDC in the program and correctly output in an exception report''
*****************************CODE HERE*****************************
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_file

Hi,
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
<b>select single MATNR
                   WERKS
                   CHARG
           from MCHA
           into (l_matnr, l_werks, l_charg)
           where matnr = w_stck_cnt-matnr
              and werks = w_stck_cnt-werks.
              and charg = w_stck_cnt-charg.
if sy-subrc ne 0.
continue.
endif.</b>
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_file
Best regards,
Prashant

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

Final Cut X not working properly

Similar Messages

Maybe you are looking for