Final Cut X will not recognize the 16 channels of Audio in capturing from Tascam Firewire Card IF-FW/DM MKII

Older version of Final Cut still captures fine. Still in Snow Leopard so that we have capatability of older Final Cut to continue capturing with, but are up to date on all drivers from Tascam for the card.

Similar Messages

Final cut x will not recognize my external harddrive

Everything was working fine until I updated to 10.0.6. Now FC will not see my external HD as a HD, when I tried to import it has it under the camera finder instead of the drive finder. None of my past project are showing in the events or project areas. I tried to go to the FC folder and open it from there, it will open FC and show the projects for the first few sec while it loads, then everthig is gone.

This usually happens because FCP sees a folder on the root level of the drive as a camera, a folder with a name like Private or Video or DCIM.

HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place."
When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
I have no other options to choose another font. Thanks for any help you can direct my way.
Debbie
From: sukritd15 <[email protected]>
To: Deborah Karr <[email protected]>
Sent: Friday, February 13, 2015 5:35 AM
Subject: While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Will not recognize the Lucid LG when connected with USB

My Dell will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately. After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?

That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port. Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5
Keep us posted on any additional information/details about your issue.
Thanks,
MikeS_VZW
Follow us on Twitter @VZWSupport

My final cut pro will not update on my iMac, it will update on my Macbook.

my final cut pro will not update on my iMac, it will update on my Macbook. I have OS X Yosemite on both systems, my macbook has final cut pro x version 10.1.4 and my iMac shows no updates available and is on version 10.1.1. I have tried looking in iTunes for the same update that is installed on my macbook under the same iTunes account, but it doesn't show any updates. I tried deleting from my iMac and it won't delete so I can reinstall it. any suggestions?

You need to be logged into the Mac App Store with the same Apple ID in order to see your updates. You speak about iTunes: maybe you meant that just as an expression to refer to your Apple ID, but just in case you didn't: you do NOT use iTunes to download mac software. You use the App Store application, available under the Apple menu.

I am trying to hook my macbook pro to a sony bravia TV via DVI to HDMI cable and the TV will not recognize the signal. The same set up has worked with three other, though different televisions. Any thoughts?

I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?

Is the TV set to take input from the HDMI connection?
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection. Check your connections.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled.

I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any t

I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.

I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

Place the device in DFU mode (google it) and restore as new.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. Help.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?

Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives?

HT1918 I have changed my new apple email address at the itunes store but when I try to buy an app on my iPad my old apple id (email) comes up and will not recognize the password. How do I change this? I tried going in through settings/tapping apple ID to

I have changed my Apple ID when I got a new email address and confirmed it. However when I go to my iPad to buy an app my old Apple ID comes up and will not recognize the password. I tried going into the settings on my iPad and tapping on the old Apple ID to go in to change it but it will not recognize it and I cannot get in on the iPad to change it. How do I change this ID on my iPad for the iTunes store?
Jaylsworth

How did you fix this??

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

I have a sony rx100 and my version of lightroom (4) will not recognize the raw (.ARW) files. Please help!

I have a sony rx100 and my version of lightroom (4) will not recognize the raw (.ARW) files. Please help!

I have version 4.4.1 on my computer now, which is functioning properly - but does not read the .ARW files. When I download the link you sent and try to open it, it pops up as version 5 and I get this image (attached). This is my first time in one of these threads, not sure if i have to reply to each of you individually?
DdeGannes, could you please tell me how to recover the serial number from my operating system?
Thank you SO much everyone!

I am using an epson projector to present images downloaded to a thumb drive. I renames the images on export to "untitled 101, 102 etc. The projector will not recognize the sequence. It wants 001, 002etc. If I try to start 001 lightroom changes it to 1, 2

I am using an epson projector to present images downloaded to a thumb drive. I rename the images on export to "untitled 101, 102 etc. The projector will not recognize the sequence. It wants 001, 002etc. If I try to start 001 lightroom changes it to 1, 2 ... 10,11 etc. How can I export and rename starting with 001?

The projector may actually be processing a 3 digit number in numerical sequence. Have you tried your export/collection in order sequence starting with 101? Assuming you have fewer than 899 images you should be OK. (I had to fiddle with export sequence for a display frame which used the file date and time for sequence!)

When I try to import video, Lightroom-4 will not recognize the video files. How do I fix that?

Lightroom 4 will not recognize the video files. It will only import the photo files. How do I import the video files?

You might provide some additional information, such as what types of videos, from what cameras, and what version of LR4 you are using.

Final Cut X will not recognize the 16 channels of Audio in capturing from Tascam Firewire Card IF-FW/DM MKII

Similar Messages

Maybe you are looking for