Final Delivery indicator not in all rows of Purchase Order

Hi,
I am constructing a query in BW where i need to filter out Purcahse Orders for which the Final delivery indicator is set.
The Purchase cube has the data coming in from following three datasources:
             2lis_02_hdr (Purcahse Order Header)
             2lis_02_itm (Purcahse Order Item)
             2lis_02_scl (Purcahse Order Schedule line).
The Final delivery indicator is populated from Item and schedule line Datasources.The Purchase cube stores the data in such a way that the final delivery indicator is not set for a Purchase order in all the rows.
Please advice how can i populate the final delivery indicator in the cube for all the rows of a Purchase Order. Also I do not want to reinitialize the data load from R3 or PSA.
Regards
Sapna

Hi ,
The answer was helpful but my problem was not solved. But in some of the cases the Final delivery indicator is not getting filtered. Also we have Posting date as a Key field in the Info provider.
Now there are various scenarios. For eg:
1. If the Final delivery indicator is set from me23n then the posting date is saved in my Purchase cube AND hence i can sort the Posting date and get the final delivery indicator against the Max posting date.
2. If the Final delivery indicator is set through MIGO screen, then posting date is blank against final delivery indicator. Hence in Purchase cube the Posting date is blank and sorting will not work.
Please advice.
Regards
Sapna

Similar Messages

Final delivery indicator not reflected in BW ODS

Hi Experts,
I have situation like, final delivery indicator not reflected in BW ODS for purchase order. In R/3 it is X, in BW showing space. There is direct mapping from datasource field to ODS for this field.Loading also seems to be ok.
Cna you please give some points where this information is missing.
Thanks
Konda Reddy

Hi konda,
See the business senerio it is not fetching the data u have to write a formula in transformation based on requirement.
Regards,
Lakshmi

Final Delivery indicator in Goods Receipt tab in Process Order

Hello Friends,
I have one doubt, thought to discuss with you.Whats the importance of Final delivery indicator in Process order.I know that if any further goods receipt is not accepted against the order than we should tick this indicator,because of which system sets the DLV status at order header level or if goods receipt qty against the order is equal to order qty than system automatically sets this indicator.
when we do the settlement of order than system looks either for TECO or DLV status of order , if its find there than system consider such orders for settlement.
Now my question is suppose i have done the Goods Receipt against the order less than the order qty, than system will set the PDLV Status against that order.Now no further goods receipt is expected against that order.Now i haven't set the Final delivery indicator in goods receipt tab in process order.But i have technically completed the order,because of which system has set the TECO status against that order.
Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
As far as i know, system allows us to do,but on this issue i have got different answers from different person.So bit confused.
Thanks and Regards,
Jitendra Chauhan
Edited by: jitendra chauhan on May 8, 2009 8:42 AM

Dear,
Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?
Yes
If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
You need to Final confirm (CNF) the Order to get the DLV Status.
Or if the Delivery completed indicator is set in the Process Order, then also th System status will be DLV
If your order quantity10 and you produced 10 quantity it means that order is fully deliver then Final delivery will automatically be set.
The "delivery completed" indicator has the following effects:
o The item is regarded as closed, even if the total quantity was not delivered.
o A further delivery is not expected, may, however, arrive.
If status is DLV then it cannot be a WIP stage where the the good are posted to stock and production is completed
Please refer this thread fro DLV and TECO,
Re: order settlement
Regards,
R.Brahmankar

Setting final delivery indicator on scheduling agreements (ELIKZ)

Hello ALL,
Based on note 199749 SAP does not set the delivery complete indicator for scheduling agreements during goods receipt processing. We're employing thousand line scheduling agreeements where new schedule items are added to the scheduling agreeement items via MRP. When the delivery complete indicator is manually set MRP proposes requisitions instead of schedule lines which is our desired processing but we need the final delivery indicator to be automatically set. Does anybody know the user exit to set this indicator during goods receipt processing including any other helpful information.
Thanks so much for your time.

Hello Walter,
this should be possible in BADI 'MB_DOCUMENT_BADI' ,
method MB_DOCUMENT_UPDATE.
Regards Wolfgang

Final delivery indicator unset after underdelivery good receipt.

Hi, If the final delivery indicator is set in the purchase order SAP allows good receipts and then unset the indicator, only if the quantity in the purchase order is equal to the quantity receipt, SAP set final delivery indicator. The user want to set the final delivery indicator to close some purchase orders with underdelivery quantity.

Alejandra,
You can advise your user that the delivery completed indicator is not designed for this purpose.
If the user wishes to prevent further receipts against a Purchase order, for any reason, he should block the item rather than rely on the DC indicator.
ME22N for the order, select the item; hit the 'lock' icon; or Edit>Block.
This transaction is reversible.
Regards,
DB49

Final Delivery indicator in PO

Hello,
I am not getting " final delivery indicator " icon in purchase order.
we are using ECC6.
Thanks in advance,
Vikas R.

Hi,
Active "Delivery completed" indicator for your plant in t.code: OMCD
For Service(external)
Check Field Selection Key for SERVICE PO Document type & make "Delivery completed" indicator is "Opt.entry" in GR/IR control segment for Field Selection Key PT9F( OR your Field Selection Key you are using for Frame work order document type) in following path:
SPRO-> MM--> Purchasing -> Purchase Order -> Define Screen Layout at Document Level
Now assign Field Selection Key PT9F for SERVICE PO Document type & save.
Go for cycle service PO, SES & MIRO and can view Delivery completion indicator
For more check the SAP Note 735404
Regards,
Biju K

Final delivery indicator

Hello
My question is
"Explain the circumstances in which the Final delivery indicator is automatically set when posting a goods receipt"
Thanks

Hi Sunil
Check help given by SAP
Set "Delivery Completed" Indicator
         the delivery completed indicator for goods receipts if the delivered quantity lies within the under/overdelivery tolerance.
     The "delivery completed" indicator has the following effects:
     o   The item is regarded as closed, even if the total quantity was not delivered.
     o   A further delivery is not expected, may, however, arrive.
     o   In the next goods receipt, the item appears on the selection list but has no selection indicator.
     o   The item can be reorganized even if the total quantity has not been delivered.
     Note
     Even if the "delivery completed" indicator has not been set, an item is'nsidered closed once the total quantity has been delivered. This mean that the "delivery completed" indicator is not necessary in this case.
    Vishal...

Delete command is not deleting all rows

Hi All,
Database version 10.2.0.2
Delete command is not deleting all rows and deleting some subset of rows which it should delete, ever time I delete and do the roll back, next time it will delete some random rows, count is different everytime with in the range but not complete in anyway. see the following -
select count(*) from test where evt_id in (select evt_id from test1);
COUNT(*)
27105
delete from test where evt_id in (select evt_id from test1);
16045 rows deleted.
select count(*) from test where evt_id in (select evt_id from test1);
11060
rollback;
Againg the same procedure -
select count(*) from test where evt_id in (select evt_id from test1);
COUNT(*)
27105
delete from test where evt_id in (select evt_id from test1);
14320 rows deleted.
select count(*) from test where evt_id in (select evt_id from test1);
COUNT(*)
12785
why its not deleting all the 27k rows in one shot? Is there any bug related to that?
Thanks
Abhinav

Odd that what looked like identical statements produced different results, both the counts and the deletes. The most likely cause of that is your data is changing - as Fahd suggested perhaps a simultaneous load taking place.
The delete issue is probably not due to a bug. Possible but unlikely.
If any evt_id values are NULL they won't be deleted with the subquery - a NULL in test.evt_id will never match a NULL in test1.evt_id.
Have you tried alternative subqueries - a correlated EXISTS subquery for instance?

Purchase Orders_ Multiple projects not permitted on a single purchase order

Hi Guru
Please assist:
We are using the MM & PS for Purchase Requisition, the Account Assignment N and the buyers created PO with different Network numbers on one Purchase Order,
I want to delete the purchase order and i am getting the message Multiple projects not permitted on a single purchase order
How do i delete this PO, i have tried the delivery complete and final invoice tick its not working
Regards
Susan

The Apple Configurator tool robbed my school of @ 60×4 apps.
Here's my mistake. I bought all the apps needed for the whole school in one lump sum. i.e. 350 copies of Pages. Then happily went to Configurator and loaded the spreadsheet. Installed on all the student iPads. Then need the remaining licenses to gift to the teachers and @ 30 for the cart. NOPE! Once they are loaded in to Configurator you can never get them back. Apple said, “sorry”.
I did this for the iWorks suite, iPhoto, & neu.Annotate before I realized what was happening.
This is what to do, in short. From the VPP account, buy the number needed for exactly what you need, just make sure, it's over 20, even if you only need 11, 20 copies is cheaper than 11 because they are half off at 20 or more. Get the spreadsheet generated by the VPP site for the 20 then buy for the next cart or site, it will generate a new spreadsheet of 20 you can give to the computer and its copy of Configurator.
https://schoolipads.wordpress.com/2013/03/23/vpp-configurator-multiple-carts-or- locations/

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

"All items from purchase order cannot be invoiced"

Hello, 
 
I'm on a SRM 7.0 SP 5 system (ext-classic scenario). Here i try to create an invoice with reference to a Purchase Order, but none of my Purchase Orders can be used for reference. I get the following warning message 'All items from purchase order cannot be invoiced'. 
 
- Created via POWL (create with reference -> invoice/credit memo) i always get the warning message 'All items from purchase order cannot be invoiced'. And no items are converted / can be used for invoicing. Additionally when i use the search option 'find purchase order' within the create invoice transaction i can not find any purchase order to use, it shows 'There is no search result' while there are plenty purchase orders marked with 'invoice expected'. 
 
I am able to create invoices without reference. 
 
I tried vendors set up only for 'invoice expected' and 'GR', 'invoice expected' / 'GR' / 'GR-based-IV' and 'invoice expected' only none of them works, indicators set on vendor master are correctly used on the created purchase order. Outputting PO doesn't make any difference neither. 

I have not set up the following (do i need to?): 
- Deactivated the 'CRME' transaction type, no Credit Memo transaction type has been configured/is active. 
- I have not defined the 'INV' transaction type as a follow-on document for my ECPO transaction type within the define transaction type transaction. 
- Tollerances 
 
edit -> i've already searched thorougly for SAP notes but no note seems to cover this particular problem. 
 
Help is very much appreciated

Solved! Added SYS attribute for back-end system in organisational scheme.

Partner details are not getting captured to the purchase order from the ven

Hi,
Issue : ( ECC PO)
Partner details are not getting captured to the purchase order from the vendor master.
We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
Any suggestions are highly appreciated.
Regards
Sudhakar

Hey Sudhakar,
I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
If this is working properly for standard POs, then,
Go to Partner detrmination under Purchasing> Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
and enter teh appropriate document type and refer it to the procedure you have for NB Pos

Is there any standard report which give all info about purchase order.

hi
is there any standard report which give all information about purchase order.
i need following information from Purchase Order.
Vendor No, vendorname, PO No, basic     Excise      insurance     Frieght.
Thanks.

Hi,
Following are reports for PO list.
ME2C           Purchase Orders by Material Group
ME2J           Purchase Orders for Project
ME2K           Purch. Orders by Account Assignment
ME2L           Purchase Orders by Vendor
ME2M           Purchase Orders by Material
ME2N           Purchase Orders by PO Number
Message was edited by:
        Vigneswaran S

Not able to print on Purchase order whatever we fill in item text

not able to print on Purchase order whatever we fill in item text, from where can we link to get printed item text on purchase order

while doing in quality whatever we fill in text in item details of p.o we are getting it printed on p.order
but same thing when we are doing in production we are not able to print on purchase order. where we should look out
for e.g in spro-mm-purchasing-purchase order..

The row in Purchase order documents cannot be closed.

I try to close a row in Purchase Order by using the Right Click -> Close Row option, or from the Data menu.
When I click on the 'Update' button, the following Error massage appear: Document rows cannot be closed concurrently with the other document modification you have made. The row cannot be closed.
Using SAP Business One 2007 A (8.00.241) SP: 01 PL: 14 HOTFIX1
Please advice the solution to solve this problem.

Hi.......
Do you have any kind of SP Transaction notification for Autoupdation?
Please mention here because such things happen due to the FMS or SPs applied to the DB.....
Also please check this thread......
Document rows Cannot be closed concurrently - Purchase Orders
Documents rows cannot be closed concurrently with the other document modify
Regards,
Rahul
Edited by: RAHUL MOUNDEKAR on Aug 8, 2011 9:44 AM

Final Delivery indicator not in all rows of Purchase Order

Similar Messages

Maybe you are looking for