Final delivery indicator unset after underdelivery good receipt.

Hi, If the final delivery indicator is set in the purchase order SAP allows good receipts and then unset the indicator, only if the quantity in the purchase order is equal to the quantity receipt, SAP set final delivery indicator. The user want to set the final delivery indicator to close some purchase orders with underdelivery quantity.

Alejandra,
You can advise your user that the delivery completed indicator is not designed for this purpose.
If the user wishes to prevent further receipts against a Purchase order, for any reason, he should block the item rather than rely on the DC indicator.
ME22N for the order, select the item; hit the 'lock' icon; or Edit>Block.
This transaction is reversible.
Regards,
DB49

Similar Messages

  • Final Delivery indicator in Goods Receipt tab in Process Order

    Hello Friends,
    I have one doubt, thought to discuss with you.Whats the importance of Final delivery indicator in Process order.I know that if any further goods receipt is not accepted against the order than we should tick this indicator,because of which system sets the DLV status at order header level or if goods receipt qty against the order is equal to order qty than system automatically sets this indicator.
    when we do the settlement of order than system looks either for TECO or DLV status of order , if its find  there than system consider such orders for settlement.
    Now my question is suppose i have done the Goods Receipt against the order less than the order qty, than system will set the PDLV Status against that order.Now no further goods receipt is  expected against that order.Now i haven't set the Final delivery indicator in goods receipt tab in process order.But i have technically completed the order,because of which system has set the TECO status against that order.
    Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
    As far as i know, system allows us to do,but on this issue i have got different answers from different person.So bit confused.
    Thanks and Regards,
    Jitendra Chauhan
    Edited by: jitendra chauhan on May 8, 2009 8:42 AM

    Dear,
    Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?
    Yes
    If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
    You need to Final confirm (CNF) the Order to get the DLV Status.
    Or if the Delivery completed indicator is set in the Process Order, then also th System status will be DLV
    If your order quantity10 and you produced 10 quantity it means that order is fully deliver  then Final delivery will automatically be set.
    The "delivery completed" indicator has the following effects:
    o The item is regarded as closed, even if the total quantity was not delivered.
    o A further delivery is not expected, may, however, arrive.
    If status is DLV then it cannot be a WIP stage where the the good are posted to stock and production is completed
    Please refer this thread fro DLV and TECO,
    Re: order settlement
    Regards,
    R.Brahmankar

  • Setting final delivery indicator on scheduling agreements (ELIKZ)

    Hello ALL,
    Based on note 199749 SAP does not set the delivery complete indicator for scheduling agreements during goods receipt processing.   We're employing thousand line scheduling agreeements where new schedule items are added to the scheduling agreeement items via MRP.   When the delivery complete indicator is manually set MRP proposes requisitions instead of schedule lines which is our desired processing but we need the final delivery indicator to be automatically set.  Does anybody know the user exit to set this indicator during goods receipt processing including any other helpful information.
    Thanks so much for your time.

    Hello Walter,
    this should be possible in BADI 'MB_DOCUMENT_BADI' ,
    method MB_DOCUMENT_UPDATE.
    Regards Wolfgang

  • Final delivery indicator

    Hello
    My question is
    "Explain the circumstances in which the Final delivery indicator is automatically set when posting a goods receipt"
    Thanks

    Hi Sunil
    Check help given by SAP
    Set "Delivery Completed" Indicator
             the delivery completed indicator for goods receipts if the delivered  quantity lies within the under/overdelivery tolerance.
         The "delivery completed" indicator has the following effects:
         o   The item is regarded as closed, even if the total quantity was not delivered.
         o   A further delivery is not expected, may, however, arrive.
         o   In the next goods receipt, the item appears on the selection list but has no selection indicator.
         o   The item can be reorganized even if the total quantity has not been delivered.
         Note
         Even if the "delivery completed" indicator has not been set, an item is'nsidered closed once the total quantity has been delivered. This mean  that the "delivery completed" indicator is not necessary in this case.
        Vishal...

  • Shipping notification created after occurred goods receipt

    Hello,
    We have in place a standard confirmation process for intercompany purchase orders. This means that when the outbound delivery is created, the system generates an inbound (confirmation) linked to the PO line.
    We have noticed that after the goods receipt has been performed, when users enter the outbound delivery in change mode the system generates output (EDI output) and a new confirmation is created and placed into the PO.
    This has as consequence that if the delivery completed in the PO is not yet set, unreal quantities are shown as expected in  the ATP check.
    Has anyone experienced this issue before?
    Thanks.
    JC Garita

    Dear,
    Please check you make the PO with account assignment category (K, A, O) so while you make the GRN with reference of PO so system will make the MM document and also FI document but stock will direct hit to concern cost center, Asset, or Order.
    and stock will not be updated or appearing in MMBE or any standard reports.
    Regards,
    Aamir

  • Final Delivery indicator not in all rows of Purchase Order

    Hi,
    I am constructing a query in BW where i need to filter out Purcahse Orders for which the Final delivery indicator is set.
    The Purchase cube has the data coming in from following three datasources:
                 2lis_02_hdr (Purcahse Order Header)
                 2lis_02_itm (Purcahse Order Item)
                 2lis_02_scl (Purcahse Order Schedule line).
    The Final delivery indicator is populated from Item and schedule line Datasources.The Purchase cube stores the data in such a way that the final delivery indicator is not set for a Purchase order in all the rows.
    Please advice how can i populate the final delivery indicator in the cube for all the rows of a Purchase Order. Also I do not want to reinitialize the data load from R3 or PSA.
    Regards
    Sapna

    Hi ,
    The answer was helpful but my problem was not solved. But in some of the cases the Final delivery indicator is not getting filtered. Also we have Posting date as a Key field in the Info provider.
    Now there are various scenarios. For eg:
    1. If the Final delivery indicator is set from me23n then the posting date is saved in my Purchase cube AND hence i can sort the Posting date and get the final delivery indicator against the Max posting date. 
    2. If the Final delivery indicator is set through MIGO screen, then posting date is blank against final delivery indicator. Hence in Purchase cube the Posting date is blank and sorting will not work.
    Please advice.
    Regards
    Sapna

  • Final delivery indicator not reflected in BW ODS

    Hi Experts,
    I have situation like, final delivery indicator not reflected in BW ODS for purchase order. In R/3 it is X, in BW showing space. There is direct mapping from datasource field to ODS for this field.Loading also seems to be ok.
    Cna you please give some points where this information is missing.
    Thanks
    Konda Reddy

    Hi konda,
    See the business senerio it is not fetching the data u have to write a formula in transformation based on requirement.
    Regards,
    Lakshmi

  • Final Delivery indicator in PO

    Hello,
    I am not getting " final delivery indicator " icon in purchase order.
    we are using ECC6.
    Thanks in advance,
    Vikas R.

    Hi,
    Active "Delivery completed" indicator  for your plant in t.code: OMCD
    For Service(external)
    Check Field Selection Key for SERVICE PO Document type & make "Delivery completed" indicator is "Opt.entry" in GR/IR control segment for Field Selection Key PT9F( OR your Field Selection Key you are using for Frame work order document type) in following path:
    SPRO-> MM--> Purchasing -> Purchase Order -> Define Screen Layout at Document Level
    Now assign Field Selection Key PT9F for SERVICE PO Document type & save.
    Go for cycle service PO, SES & MIRO and can view Delivery completion indicator
    For more check the SAP Note 735404
    Regards,
    Biju K

  • EKET-FIXKZ set after partial goods receipt of subcontract delivery schedule

    Dear all,
    when booking a partial goods receipt (via MIGO) of the finished product of a subcontract delivery schedule the schedule line becomes fixed (EKET-FIXKZ = 'X'), which hinders the next MRP run to modify the delivery schedule according to the new requirements.
    I have tested to change the fixing indicator via SE16 and the next MRP run will then replan the sub contract delivery schedule correctly. But this is no solution.
    Is there a way to modify this setting via an EXIT or BADI in MIGO ?
    Many thanky for your help
    Rabanus Diehl

    Dear all,
    when booking a partial goods receipt (via MIGO) of the finished product of a subcontract delivery schedule the schedule line becomes fixed (EKET-FIXKZ = 'X'), which hinders the next MRP run to modify the delivery schedule according to the new requirements.
    I have tested to change the fixing indicator via SE16 and the next MRP run will then replan the sub contract delivery schedule correctly. But this is no solution.
    Is there a way to modify this setting via an EXIT or BADI in MIGO ?
    Many thanky for your help
    Rabanus Diehl

  • Delivery complete indicator set by partial goods receipt in kanban orders

    HI Experts,
    we recently upgraded to ECC 6 DIMP EP 6. Now for kanban production orders delivery complete indicator is set for partial goods receipt. Under delivery tolerance is zero. Is there any notes available for this issue. Manual production order goods receipt is fine.
    THanks
    RIjil

    Hi,
    Let me try and understand your scenario better. You have a production order triggered by KANBAN. You then do a GR via inventory management of a partial quantity. Would you then GR the remaining quantity?
    The reason I ask is because this is KANBAN production, the bin being filled multiple times for the same trigger does not sound right. The system behavior of not expecting further deliveries (by setting delivery complete) seems appropriate.

  • Split/change line in Purchase Order after partial goods receipt

    Hi
    I have a PO with multiple lines/items. For one line there has been a partial goods receipt and for the open qty there will be a delay. Do I have any chance to either:
    - Change the delivery date for this row to match the ETD of the open qty
    - Change the initial qty of the line to the one received (that the line closes) and open a new line with the correct date for the open qty
    I just cant change anything in a line for which a partial goods receipt has been posted.
    Thanks
    Franz

    Hi Gordon,
    Thanks for the info. Another idea: How about ..
    - adding the item on a new line with the open qty and the correct date
    - simply closing the partially posted line with the open qty (is that ok from the DB view?)
    Any doubt that this could work as intended?
    Thanks
    Franz

  • Info record reminder going to vendor after all good receipt

    Hi All ,
    Info record reminder is going to vendor after good receipt also , what will be the possible cause for this . Last week system is upgraded from 4.6c to 6.00 , is it any problem because of upgrade .
    How to stop this reminders .
    RB

    solved

  • Inbound delivery - external ID in MM Good Receipt  material document

    Hi,
    during  good enter of an inbound delivery through SD trx VL06IG, the system copyes the Inbould delivery number LIKP-VBELN in field MKPF-XBLNR .
    How can I do in order to copy the External Vendor identification LIKP-LIFEX  in field MKPF-XBLNR  instead of LIKP-VBELN?
    Thanks
    Fabrizio

    Hi,
    my situation is:
    - a WM managed warehouse, society A;
    - a HU managed warehouse (without WM), society B;
    - a purchasing process of HU from society A towards society B.
    Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
    This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
    "V51VP - item was not found - process cancelled".
    Can you help me to transfer these HU?

  • Deleted Delivery Unable to do the Goods receipt reversal

    Hello Experts,
    Instead of deleting the particular delivery line items, user has deleted the STO delivery completely by using VL02N transaction code. Now in the purchase order history we have only GR and invoice document related to STO. (We already reversed the billing and deleted the delivery)
    Now we are unable to reverse the GR and getting the error "Delivery cannot be updated". This error because of the deleted delivery.
    Please advice how to proceed further. Now the overall from accounts it is showing imbalance.
    Please note, we are doing STO between company code to company code.
    Regards
    Rifaie M

    Satish,
    From you, i understood that for cancelling the GR i have to give delivery number reference.
    But in my case the delivery number itself deleted. I do not have delivery number in purchase order history. This has been deleted by the end user by mistakenly.
    Please advice
    Regards
    Rifaie M

  • VL32N Change inbound delivery quantity after a partial goods receipt

    Dear.
    I have created an inbound delivery using VL31N from a purchase scheduling agreement.
    I have executed a partial goods receipts using MIGO for the inbound delivery.
    I need to reduce the delivery quantity for the inbound delivery using VL32N but the system donu2019t allow to change the delivery after a goods receipt.
    How can I proceed ?
    Thanks for your help.

    Hi,
    When a (partial) goods receipt has been posted to an inbound delivery item, the possibilities to change this item are restricted.
    If the delivery quantity is the same as the goods receipt quantity, then the item is fully posted goods receipt. No change of quantity is possible.
    If the delivery quantity is still higher than the goods receipt quantity, you can create one or several new TO's for the rest and
    confirm, if needed, with differences.
    You have also the chance to adjust the delivery quantity to the picked (and already posted) quantity with VL32N and menu:
    Edit => Copy Putaway Quantities as Delivery Quantities
    Please also have a look at note 796053.
    Hope this can help
    Regards
    Mauro

Maybe you are looking for

  • Calling stored procedure and returning multiple resultsets

    Hello, Is it possible to create a procedure that return multiple result sets? e.g. procedure GetDataFromTables() is begin select * from table_one; select * from table_two; end GetDataFromTables; And I want to call this procedure that returns multiple

  • "Create Application from Database" and BLOB type

    Hi all, I see many threads about BLOB type but my question is related to the Flex Builder built-in feature "Create Application from Database". Is there a way or a sw version to automatically use MySQL BLOB types when creating a PHP/database applicati

  • SAP Run time error

    Hello SAP Fox, I have problem, when I use T-code QS21 after completing data and try to save it the system terminate and says its run time error. The whole system is working great only above t-code give me trouble while I save the data.The error is fo

  • Is there a way to disable plugins globally, but enable them on a per-site basis?

    Is there a way in Firefox to globally disable plugins and allow only certain sites to run them (i.e., a whitelist)? I've tried working with CAPS, but it doesn't seem to be able to turn off <embed> or <object> tags, only certain aspects of JavaScript.

  • Adobe Photo Deluxe 2 won't load photo from scanner

    I have been using APD2 with my scanner and as stand-alone for a long time. Recently, it stopped accepting the scanner files - something about not recognizing the file type or extension. What can be done on this? Also after loading and editing a photo