Final Entry marked without any service entry

Dear Gurus,
I have a service PO with 2 line item, and same service number.
Service entry for the first line item has been successfully created, however when I try to create the SES for the 2nd line item I get the error "Not possible to enter services ("final entry" indicator set)".
There is no PO history for this line item. In EKPO table the Delivery completed indicator has been marked, but since delivery completed indicator field is not active in Service PO, hence this indicator has not been set manually.
Can someone please explain this behaviour, as there is not servcie entry sheet against this line item in PO, I cannot revoke the acceptance and reset the Final entry indicator.
Please share your thoughts.
Regards
Vinay

Hi Rajendra,
If I had selectedFinal entry then, atleast Purchase Order history would have been updated with th Service entry number. But there is no Purchase Order history for this line item.
Also I can see the Delivery completed indicator marked in EKPO table for this line item.
Please advise.
regards
Vinay

Similar Messages

  • After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

    After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

    The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
    Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
    Regards.

  • I have been using Final Cut pro v6 without any problems but recently had to reinstall.  Since then I can't open and view all my Quicktime clips.  They appear white in timeline which means you can hear audio but not view picture.  Any tips?

    I have been using Final Cut Pro without any problems - v6 - for ages.  I recently had a hardware issue and had to reinstall the software.  Since then I can't open most of my QT clips in my fcp project.  They appear as white clips - audio only no pictures.  There are a few QT clips you can view as regular thumbnail images and they play ok.  What's the issue?  I have fcp v6.0.6 and QT v7.  Any thoughts on what to do next?

    Yes I did software updates which updated fcp to 6.0.6 and QT to version 7.7.  That's as far as updates have taken me although i have requested daily updates.  I forgot to say the clips don't play in QT view either.  Again sound but no pictures when they are played.

  • Service entry sheet can't be changed to update the final entry indicator

    Hi All,
    Can any body suggest possible reason and a solution for the below?
    I am having a situation in which for a service P.O for which partial service enty has been done and for that invoice has also been done.(In production)
    Now when I am trying to close the P.O line item by going to service entry sheet by t.code ml81n there i am not able to get the change icon , and hence i am not able to revoke the acceptance of service entry and subsequently I couldn't be able to set the final entry for that.
    I tried to do the simulate the same senario in development(testing client) server and it is working fine, could any one sugget the reason and solution how to close the service line item in the P.O .
    Regards,
    Sushanta

    Hi,
    That was useful but I checked some other service P.O and for them I am able to see the change icon.
    the p.o in my earlier mail are old one of 2002, but they are having partial service entry and invoice against them,
    Could any one please tell me under what circumstances I will not be able to see the change icon in the service entry sheet?
    Is it if the service entry is done at an old date, i mean earlier date or any other reason.
    please let me know soon
    Thanks
    Sushanta

  • Final entry issue in Service Entry and PO

    Dear SAP Guru,
    I am having the situation like this where the servie PO is being created, then service entry and service acceptance are being carried out at ML81N. The PO amount is 100.
    When the service PO is being check at the ME2N, the field "Still to be delivered" is showing the amount of 100.
    If the Service PO being done the service entry with the amount of 50. The "Still to be delivered" field in ME2N will show the amount of 50 and the "Still to be invoiced" field will show the amount of 50.
    If the Serivce PO being done the service entry "Set Final Entry" button being clicked, the "Still to be delivered" field in ME2N will show the amount of 0 and the "Still to be invoiced" field will show the amount of 100.
    My question now is that:-
    If the Serivce PO being done the service entry "Set Final Entry" button being clicked, the  "Still to be delivered" field in ME2N will show the amount of 80 and the "Still to be invoiced" field will show the amount of 20.
    What is to be done to make the "Still to be delivered" field in ME2N to show the amount of zero.
    Is there any indicator being shown in the PO delivery tab if the "Set Final Entry" button being clicked at ML81N.
    Thank you
    Regards
    Leonard

    Hi Tan,
    The delivery completion indicator will be hidden mode in normanl service orders. You have to do a liitle customization to bring it in editable mode.
    Go to SPRO>material management>purchasing>purchase order>Define Screen Layout at Document Level
    Then select field selection PT9F and select GR/IR control. In here for "Delivery completed" indicator check the optional entry and save.
    Now check it in the service order and you will be able to see "Delivery completed"  indicator.
    Regards,
    Mohar

  • Service Entry - Final Entry set but still can create new entry sheet

    Hi gurus,
    got this problem, after I have set the final entry indicator, I am still able to create new service entry sheet... anyone know why?
    Note: I am currently on ECC5.
    Regards,
    Norman

    Hi,
    First check deletion flag is active in service entry sheet.
    If no then first set deletion flag to service entry sheet.
    Also check Material document is updated with movement type 102 in purchase order history.
    If yes then no problem is exists.
    For your verification please create new service entry sheet for same line item. If system give not any error so no any problem.
    Regards,
    Mahesh Wagh

  • Final entry in service entry

    Is there any way to hide the final entry indicator in Service entry sheet?
    Please advice.
    Thanks

    Hi,
    it is not recommended to hide the final entry sheet icone as the delivery completed indicator in the purchase order (EKPO-ELIKZ) is by default hidden ON PURPOSE for service items so        
    that the control is not performed in the purchase order, but indirectly via the final entry sheet indicator in the respective entry sheet.  
    Please read the note 735404.
    Regards,
    Edit

  • Final entry indicator in SES

    Hi Gurus,
    I would like to ask if there's a way to set the "final entry" indicator on accepted SES without revoking its acceptance. We have lots of SES that we need to set as final entry so that it would not appear as "open" on Purchase Orders.
    Any help is greatly appreaciated.
    Thanks and Best Regards,
    MM

    Mr. Uttkarsh Agrawal,
    It seems you dont understand where I am coming from. I'm using the field delivery compeleted indicator as an indicator whether a particular PO is OPEN or CLOSED. It is working fine for standard items since that field is open. Now, since that field is hidden for SERVICE PO and we cannot set it manually, we have to set it on the SES in which we cannot just set unless we revoke the acceptance. Thus, this posted message here.
    MM

  • Final entry indicator

    Hi gurus,
    please tell me the process( path) to enable final entry indicator while creating the service entry sheet.
    Rgds

    Read all the replies in the below link
    Re: Final entry in service entry sheet

  • I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

    I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

    The only way that would work out is if you ran exactly the versions that were made for old PowerBooks. Anything newer may require Intel and not run, or will strain the poor old G4 CPU.
    Your needs have to be modest, too, because the problem with older music and video software is that they are not current as far as formats and codecs for the Web. If you want to output H.264, the current standard for YouTube/Flash video, older software may not support it, and in addition, H.264 is processor-intensive and is tailor-made for today's multi-core, 2+ GHz processors. It will overwhelm a G4. A PowerBook G4 can barely play YouTube videos.
    More perspective: The PowerBooks worked great for miniDV format editing. In other words, 480i SD/standard definition video in use from the late 1990s to the late 2000s. If that is all you want to do, edit tape from an old miniDV camera to SD output, then OK.
    But if you want to edit today's HD video, whether 720p from a snapshot camera/iPhone 4 or 1080p from a DSLR, the PowerBook and the software for it will either not recognize AVCHD/H.264, or it will slow the PowerBook to a dead crawl.
    I'm in agreement with the above: Intel Macs have been out for so many years that getting a used one is a much better deal than a dead-end PowerBook. And I loved (still love) my PowerBooks.

  • Web service hangs without any errors and exceptions

    hi all,
    We have a ejb application web service that is binded with shedular bc to trigger for every 2 hours
    and it runs for one and half hours making continous transactions with database..
    In the web service a outer for loop will be iterated by fetching list of data from database. And this list will be iterated in the inner for loop.
    This logic works fine for sometime, but suddenly after some random period of time without any errors and exceptions the outer for loop gets no list from database
    and the inner for loop is never executed and the web service completes processing.
    This i can able to see form my log files.
    i dont understand why the list is not fetched from the database, is the problem with hibernate or it lost the connection with database,
    either case it has to throw exception but the service is not.
    otherwise does this is garbage collector issue.
    Thanks in advance,
    Bye

    Without any code to see what's going on we'd be flying blind trying to answer this one.

  • I cannot open my photo booth, the photo booth icon has a question mark on it. I have been using my photo booth without any problems before, what do I do please.

    I cannot open my photo booth, the photo booth icon has a question mark on it. I have been using my photo booth without any problems before, what do I do please.

    You move it back to the Applications folder or reinstall it from your OS install disk, using Pacifist if needed.
    (58223)

  • SCEP Service started without any malware protection engine; AV signatures out of date; AS signatures out of date

    Our new pooled VDI collection reports the following errors in SCCM 2012 R2 regarding SCEP:
    Service started without any malware protection engine; AV signatures out of date; AS signatures out of date
    The Windows Update service is disabled and it is by design when we create a new collection, althought the service is enabled on the master template.
    SCEP is not up-to-date, real-time protection is off, and this is causing us compliances issues.
    Any ideas?

    Hi,
    How do you set the SCEP to get definition updates?
    The following blog might help.
    http://gerryhampsoncm.blogspot.com/2013/08/config-mgr-2012-endpoint-protection_4240.html
    (Note: Microsoft provides third-party contact information to help you find technical support. This contact
    information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • "No service 3G" displayed without any signal level displayed

    I just upgraded to IOS 6 and after re-entering my APN info and restarting my iPad 2 my iPad 2 tried searching for a carrier the displayed:
    "No Service 3G"without any signal level displayed.
    The Carrier shows correctly in Settings-Carrier and my iPad 2 seems to be fully operational.  Data flow (web browsing/e-mail/etc) on the 3G and Wi-Fi networks are good.
    How do I get the carrier and signal level to display correctly?

    That's kind of what i was wondering i live in Apartment Building as well top floor We have a Tower 2 miles to the North a Tower 1 mile or less to our South and 1 that's close to 2 miles to our West and is on Another apartment building and the Signal i'm getting is 3 to 4 bars and the 4G the bars indicate CDMA signal only why as the 4G is your Data.. Our apartment is maid out of Brick with Metal Windows the Roof is a Normal flat Roof with a High Grade Roof shingle..
    You might Check and see what is in the Building Materials in your Apartment and if you Live in the bottom part of it that might Hamper the Signal somewhat..

  • Can I use a Verizon 3rd Gen iPad on WiFi without activating service without losing any functions?

    Can I use a Verizon iPad on WiFi without activating service without losing any functions?

    Yes, the cellular iPads function the same as the regular ones except that they have the cellular antenna. Just be sure to turn off cellular in your settings, right below WiFi and Bluetooth so you don't get charged if it is accidentally used, meaning you won't have WiFi everywhere anymore, unless you want to pay for a monthly plan again

Maybe you are looking for