Final issue indicator on the general data button on the work order

Hi Gurus,
can anybody please let me know why the final issue check box is checked automatically even before the goods are issued via migo against the work orders. This check box is on the general data tab of the material entered on the components tab of the work order. Please help. As a result of this, the store room clerk cannot issue the material againsth the work order, because this check mark is checked. I want to understand what is causing the check mark to be checked automaticallu even before tthe materials are issued out
Thanks
ANusa

Hello!
This might have occured due to completion confirmation of order before goods issue. Generally this happens if final issue indicator is set as default in completion confirmation tab. Please check and reply if problem is something else.
Regards,
Vaibhav Mishra
Edited by: Mishra_Vaibhav on Jan 27, 2011 5:23 AM

Similar Messages

Final Issue Indicator not set in maitnenance order after ECC 6.0 upgrade

Hi,
We encounter this problem after upgrading to ECC6.0 from SAP R/3 4.6C
Final issue indicator (RESBD-KZEAR) is not being set in maintenance order (IW33) for sub-component non-stock items in General Data page
Would be great if anyone could guide in this regard
Detailed Scenario:
1) Maintenance Order is created (IW31) is created in plant A
2) For non-stock items, reservation created by maintenance order creates a purchase requisition
3) Account Assigned STO (against maintenance order) is created from purchase requisition
4) Transfer Posting done from Plant B (351 movement) for complete qty
5) GR at Plant A done (101 movement) for complete qty.
6) Final Issue Indicator is not set in General Data page eventhough the complete quantity is delivered.
Thanks
Edited by: muthukumarv on Apr 2, 2010 8:59 PM
Edited by: muthukumarv on Apr 2, 2010 9:00 PM
Edited by: muthukumarv on Apr 2, 2010 9:03 PM

Hi,
Please check in the STO if the "Delivery completed" indicator is checked or not?
If Yes, then search some correction notes of SAP and get it implemented or raise OSS message with SAP to get the Final Issue indicator to be set in maintenance order.
If No, then ask your MM consultants to investigate that. They can check the config of "Goods Receipt" Or check if the total quantity GR has been done Or some Under delivery/ Over delivery tolerance has been maintained.
Thanx.
Nilmoni.

Final Issue Indicator on reservation

I am looking for the answer to how the Final Issue Indicator should function when it is checked doing a partial goods issue to a reservation.
I've found differing documentations.
1- Final Issue indicates that a reservation item is completed. Further goods movements in respect of this reservation item are not anticipated, although they are still possible.
2- If the Final Issue Indicator is set that it will no longer be suggested as a selectable item for issue.
My problem is that when the Final Issue Indicator is set while doing a partial goods issue, the item still shows up on MIGO as a selectable item when you are issuing remaining items. I did not think the item would still show up as selectable. (seems to be following #1)
When the Final Indicator is set before issuing anything on the item, then the item doesn't show up as selectable on MIGO. (Seems to be following #2)
Thanks for any help.

Hi
Final issue indicator behaviour in reservation.
1) Create reservation and in change mode set the FI indicator.
In this scenario system will not not allow you to use reservation saying that XXXX does not contain selectable item.
2) Create reservation and do the partial goods issue then set the FI indicator.
In this scenario system still allows to do the goods issue for the remaining item.As per standard SAP it is still possible to do the GI for the partial issed one even the FI is set. If you want to restrict then you can either set the deletion indicator or remove the movement allowed indicator.
Hope it helps at some extent.
Karthik

Mass change final issue indicator in production order

Hi
Is there any report can show final issue indicator for all production order? How can I mass change the indicator?

Hi,
In reports such as COOIS and COHV you can select in the initial screen "List: Components" and check your "Change layouts" to view the report with the "Final Issue" indicator.
But you cannot do a mass change in this option. One way is : You can just select the particular order -> goto Component Overview of the order to be changed and do the necessary changes and save to get the required result.
-Thaila Shree

How to deactivate automatic setting of final issue indicator in reservation

Our client has a requirement to deactivate the automatic setting of the final issue indicator after the reserved quantity on a reservation has been fulfilled.
The requirement comes from an overnight shift that does not have access to the SAP system, so the final issue indicator that is automatically set after the reserved quantity is fulfilled cannot be reset manually when the material is needed during the overnight shift.
I do not believe backflushing is an option because the material is issued to a cost center (orders are managed outside SAP) and thus there is no confirmation.
Is there a standard method for deactivating the automatic setting of the final issue indicator when the reserved quantity is reacched?
Thanks.

Bob_Smith1103 wrote:
The requirement comes from an overnight shift that does not have access to the SAP system, so the final issue indicator that is automatically set after the reserved quantity is fulfilled cannot be reset manually when the material is needed during the overnight shift.
Please see my earlier comment that the overnight shift does not have access to SAP and therefore cannot manually reset the final issue indicator until the next day when someone with SAP access is present.
Obviously the goods issue could wait until the next day, but the client is not satisfied with waiting until the next day to post-process the goods issue.

Final issue indicator for Reservation Item

Hi,
The issue is as follows:
The Componets for the Process order are issued through T. code COIK. Some componets are not appearing in COIK list . when the picking is done for the order, the final issue indicator is set in the process order where the componets are not picked and also the final issue indicator is not set where the componets are picked.
Can anybody tell me what could be the Reason/s for the above.
Regards,
Prasad

Dear,
FI indicator can be set manually via MB22 though the Reserved qty has not been withdrawn.
There is indicator in MB22 to tick for the final issue, this indicator is set automatically for a goods movement when the total reserved quantity has been withdrawn or delivered.
Final option is to clean only the reservation for a given material, just go to the ordern in change mode, and then to the material details, and set the flag "on" for the field "Final Issue".
Reservations are created when order gets released.
1. can clear these reservations at the time of the order confirmations by clicking on checkbox for clear open reservations.
2. You can also clear this reservations by using transaction code MB22 & deleting the reservations.
3. You can delete all reservations by deleting material documents or by cancelling process order confirmations.
4. Or by checking final issue in process order transaction COR2.
Hope this will resolve your querry.
Regards,
R.Brahmankar

Clear open reservation for Final issue indicator.

Final issue indicator is not getting checked unless we issue the entire requirement quantity.
How can we get it checked for all components without going into the process order?
Does the clear open reservation checkmark be used for this purpose and if with Final confirmation?
or is there something else?
Thnx!

Hi Abhi,
While confirming the operations, flag 'Clear open reservations' check box & this will set the "delivery completed" indicator for all open reservations.
Hope it answers your query.
Regards,
Vivek

Assigning a new tab to the general data of business partner

Hi,
I have followed the steps of creating a field group, view, section. After adding my ztab in the screen sequence of the general data in business partner. But i am unable to see the tab in the BP.
Can anyone suggest me on this?
regds,
Dimple c.

Hi Deepika,
Have you generated your screen in transaction BUSP. Select the object BUPA and generate all the screens. This should solve your problem. For your information EEWB is the alternative transaction to add the custom tab for these objects, you just have to run the wizard . This option is really very simple to enhance the objects.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

HT4157 I have an iPad 2 and it does not display the cellular data button under settings

I have an iPad 2 and it does not display the cellular data button under settings. It does display a Bluetooth button in its place. I have tried the reset but no luck

Is the iPad the Cellular version? Does it have an active Data plan? Does it have a Sim card installed in inside it?

WiFi ON/OFF button Doen't Work, the IPod doesn't show the on/off button in the Settings- General - WiFi

After My IPod Touch 4th Geneartion was broken I had to fix the screen, which cost me a lot, after a perfect restore through the ITunes I went to connect to my IPod to the WiFi network then the WiFi ON/OFF button Doen't Work, the IPod doesn't show the on/off button in the Settings-> General -> WiFi.
And another problem I encountered during this operation was that the Games I downloaded through the ITunes doesn't work, when I click on the icon ( Game Icon) it starts an then closes in a few seconds

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Apple wil not help since yo took the iPod apart
Try taking it apart and look for a disconnected antenna.
Installing iPod Touch 4th Generation Wi-Fi Antenna - iFixit

How can i delete all data from treo 750 - where is the hard reset button for the treo 750

I'm giving my phone to my brother and want to delete all my data from the treo 750 (AT&T). All the other posts I read doesn't tell me where the reset button is. Please Help!
Post relates to: Treo 750 (AT&T)

Hello and welcome to the Palm forums.
A hard reset wipes everything off your device. A hard reset is performed by holding down the power/end call button while removing the battery from your device for a few seconds. Keep your hand on the power/end call button until you put the battery back into your device. After you put the battery back in, the screen will say "Palm Powered." Take your hand off the power/end call button. You will now see a screen in 5 languages prompting you to erase all data from the palm. The screen will say "erase all data? Yes - up, no - down" and you need to click on the up arrow (button on the 5 way navigator on the bottom of the treo). This will erase all the info from your device.
I hope this was helpful!
Post relates to: None

Final issue indicator for component

Hi
I have requirement to set final issue indicator to all components when process order has DLV status.
We have confirmation configuration which will set final issue indicator when operation is finally confirmed.
Iam using special control key to identify operation for which components are attached
If i use COHVPI mass confirmation then it confirms all operations though i select special control key in layout filter. We dont want to confirm all operations
Is there any STANDARD way to do mass confirmation of selected operation / phases. ?
Or
Is there is any STANDARD way to set final issue indicator for all process order components, when order is delivered?

Hi Caetano
My requirement is to do this in background with confirmation of only one operation for which i have special identifier like control key.
I dont want to confirm other operations.

Line Graph repeats the starting data point at the end also

Hi,
We have a Line Graph as below. This graph is used to show the Salary changes of a person, over time.
But this graph shows an additional non existing data point. Basically it shows the starting data point once again at the end of the other data points.
The model VO for this graph, does not contain this additional data point record. But the graph repeats the starting data point at the end also.
In the screen-shot you can see that, the graph has three data points. But the table has only two. The first data point in the graph is repeated as the last data point.
Is this a Bug..?
Or an issue with the usage of the DVT tags?
The code is given below.
Please advice.
12 <dvt:graph id="lineGraph1" value="#{bindings.SalaryHistory.graphModel}"
13 graphType="LINE_VERT_ABS"
14 shortDesc="#{HcmEmploymentTopGenBundle}"
15 markerDisplayed="true"
16 continuousTimeAxisInterval="CTAI_DAY"
17 contentDelivery="immediate" animationOnDisplay="AUTO"
18 imageFormat="FLASH" stylePath="April"
19 timeSelectorListener="#{backingBeanScope.AssignmentChangesAndSalaryBean.changeTime}"
20 timeAxisType="TAT_MIXED_FREQUENCY" dynamicResize="DYNAMIC_SIZE"
21 inlineStyle="height:40em;"
22 binding="#{backingBeanScope.AssignmentChangesAndSalaryBean.asgSalaryGraph}">
23 <dvt:background>
24 <dvt:specialEffects/>
25 </dvt:background>
26 <dvt:graphPlotArea/>
27 <dvt:seriesSet>
28 <dvt:series/>
29 </dvt:seriesSet>
30
31 <dvt:o1Axis scrolling="asNeeded"/>
32 <dvt:y1Axis/>
33 
34 
42 <dvt:o1MajorTick/>
43 <dvt:o1TickLabel/>
44 <dvt:o1Title id="o1Title1">
45 <dvt:graphFont id="graphFont1"/>
46 </dvt:o1Title>
47
48 <dvt:attributeFormat id="af1" name="DateFrom">
49 <af:convertDateTime pattern="#{applCorePrefs.dateFormatPattern}" />
50 </dvt:attributeFormat>
51
52 <dvt:markerText>
53 <dvt:y1Format>
54 <af:convertNumber pattern="#{applCorePrefs.numberFormatPattern}"/>
55 </dvt:y1Format>
56 </dvt:markerText>
57
58
59 </dvt:graph>

If I understand your question, this from the Pages online help may give the answer:
To mark line, area, and scatter charts with data point symbols:
Select the entire chart. You can also select the chart series (the line or area shape) that you want to mark with data point symbols.
Click Inspector in the toolbar, and then click the Chart Inspector button.
Click Series (except for scatter charts).
Choose a symbol from the Data Point Symbol pop-up menu.
Choose one of the following options from the Symbol Fill pop-up menu:
To fill the symbol with the same color as its outline, choose Use Stroke Color.
To fill the symbol with a solid color, choose Color Fill, click the Fill color well, and pick a color.
To fill the symbol with a gradient, choose Gradient Fill and use the gradient controls to set the colors and change the angle of the gradient.
To fill the symbol with an image, choose Image Fill and select the image you want. You can also resize the image by choosing an option from the pop-up menu above the Choose button.
To fill the symbol with a tinted image, choose Tinted Image Fill and select the image you want. Click the color well to the right of the Choose button to change the tint color. You can also resize the image by choosing an option from the pop-up menu above the Choose button.

After choosing a jpg for upload, the "Upload File" button on the organization's receiving site of does not respond. The second problem: it's impossible to highlight more that one file at a time.

Clicking the first file, holding down shift and clicking the last file doesn't work. I've tried all manner of command, control, shift combos without success. This one-at-a-time attachment problem also happens in web mail. Are these two issues related? Thanks for non-techie solutions for both issues. I have Safari 5.0.6 (5533.22.3) and Leopard.

Thanks for your response. I do have javascript turned on (not java). To answer your question,
I was trying to upload 3 jpgs to the submissions page of a visual arts website. I could only highlight one jpg at a time in the "Choose File" option, and then the "Upload File" button of the submissions page would not respond.
It's an ongoing problem with this site (I'm the only one with this issue and there are a lot of submissions). I have to send the images as email attachements to the administrator of the site. When doing this via webmail, I still the one attachment at a time problem, but the images get to the administrator. Thanks for helping.

Can we disable the default push buttons on the ALV Grid

Hi,
    Can we disable the default push buttons on the ALV
Grid Control...
    If so, pls send me the procedure...
thanks and regards
   raghu

Hi,
In the PBO:
PERFORM f9100_exclude_functions USING :
                         i_exclude[] '&CHECK',
                         i_exclude[] '&REFRESH',
                         i_exclude[] '&LOCAL&CUT' ,
                         i_exclude[] '&LOCAL&COPY',
                         i_exclude[] '&LOCAL&PASTE',
                         i_exclude[] '&LOCAL&PASTE_NEW_ROW',
                         i_exclude[] '&LOCAL&UNDO' ,
                         i_exclude[] '&LOCAL&APPEND',
                         i_exclude[] '&LOCAL&INSERT_ROW',
                         i_exclude[] '&LOCAL&DELETE_ROW',
                         i_exclude[] '&SORT_ASC',
                         i_exclude[] '&SORT_DSC',
                         i_exclude[] '&FIND',
                         i_exclude[] '&SUMC',
                         i_exclude[] '&SUBTOT',
                         i_exclude[] '&MINIMUM',
                         i_exclude[] '&MAXIMUM' ,
                         i_exclude[] '&VGRID' ,
                         i_exclude[] '&VEXCEL' ,
                         i_exclude[] '&VCRYSTAL',
                         i_exclude[] '&HTML',
                         i_exclude[] '&MAINTAIN',
                         i_exclude[] '&SAVE',
                         i_exclude[] '&GRAPH',
                         i_exclude[] '&HELP',
                         i_exclude[] '&ALL' ,
                         i_exclude[] '&SAL' .
*                         i_exclude[] '&EXCLALLFC'.
*&      Form f9100_exclude_functions
* This form exclude buttons from the toolbar.
*      -->P_IEXCLUDE text
*      -->P_1150   text
FORM f9100_exclude_functions USING   pexclude LIKE i_exclude
                               value(pfunction).
DATA: l_exclude TYPE ui_func.
l_exclude = pfunction.
APPEND l_exclude TO pexclude.
ENDFORM.                    " f9100_exclude_functions
This will exculde the default push buttons.
Let us know if it works for you.
Regards,
Anjali

Final issue indicator on the general data button on the work order

Similar Messages

Maybe you are looking for