Final Items Would like to Modify...

Hi,
Here are a few items I'd like to iron out for this site
design...
1) CURIOUSITY: The sign up box, I chose the 'center'
alignment within the CSS panel so that the text would be centered
within that box...however, when I uploaded, I found that the sign
up box was centered on the page. If you see the site, I have made
it right flush by adjusting the margin, and it looks great online,
however, in my DESIGN VIEW in DW, it's well outside the confines of
my table, which worries me. -- Is that acceptable or is there a
better way to handle that?
2) I'd now like to bring up 'discover' and so the paragraph
will move up also...right now it's set to top margin: -19. I tried
playing about with it and I cannot get the result I'm looking
for...it must be reading the text in the sign up box as line items.
3) Upon testing in different browsers or different monitor
resolutions, on some occasions, 'exclusive offers' (in the Sign Up
box) dips below the boxed in rectangle.
4) Only other item...in FireFox, the links menu shifts down a
bit more, leaving too much space at the top of the "frosted box".
I'd like to correct these items, please advise...
http://fasttag.com/prestige%2Dlane%2Dtesting%2Dphase/
Thank you!

Hi,
Here are a few items I'd like to iron out for this site
design...
1) CURIOUSITY: The sign up box, I chose the 'center'
alignment within the CSS panel so that the text would be centered
within that box...however, when I uploaded, I found that the sign
up box was centered on the page. If you see the site, I have made
it right flush by adjusting the margin, and it looks great online,
however, in my DESIGN VIEW in DW, it's well outside the confines of
my table, which worries me. -- Is that acceptable or is there a
better way to handle that?
2) I'd now like to bring up 'discover' and so the paragraph
will move up also...right now it's set to top margin: -19. I tried
playing about with it and I cannot get the result I'm looking
for...it must be reading the text in the sign up box as line items.
3) Upon testing in different browsers or different monitor
resolutions, on some occasions, 'exclusive offers' (in the Sign Up
box) dips below the boxed in rectangle.
4) Only other item...in FireFox, the links menu shifts down a
bit more, leaving too much space at the top of the "frosted box".
I'd like to correct these items, please advise...
http://fasttag.com/prestige%2Dlane%2Dtesting%2Dphase/
Thank you!

Similar Messages

  • "Another program on your computer would like to modify Firefox with the following add-on" - how do I allow extensions?

    I cannot get extensions to run or enable, nor does the browser remember my preference.
    For example, after I install or Enable an extension, when I restart Firefox I get a tab for every extension that forces me to check "Allow this installation" after the prompt "Another program on your computer would like to modify Firefox with the following add-on".
    Moreover, when I click 'Options' on an installed extension, Firefox freezes permanently.
    Note that I DO NOT have any extensions.* files in my Profile folder, nor do they appear.
    I am trying to get MozRepl running. I am able to install it, but the menu option does not get added in the 'Tools' menu. Moreover none of the installed extensions are able to add to the menu.
    I've tried every solution in the following links
    https://support.mozilla.org/en-US/questions/929335
    http://kb.mozillazine.org/Preferences_not_saved
    https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save
    I have made the Profiles\ folder and all subfolders Read-only, including the files.
    I have tried the "Reset Firefox to its default state".
    I have tried uninstalling (including removing all profiles/data) and re-installing Firefox, and I get the same issues.
    My operating system is Windows 7 and I have McAfee SiteAdvisor Enterprise Plus and McAfee VirusScan Enterprise + AntiSpyware Enterprise.

    Check that Firefox isn't set to run as Administrator.
    Right-click the Firefox desktop shortcut and choose "Properties".
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
    * Privilege Level: "Run this program as Administrator" should not be selected
    * "Run this program in compatibility mode for:" should not be selected
    Also check the Properties of the firefox.exe program in the Firefox program folder (C:\Program Files\Mozilla Firefox\).

  • "Another program on your computer would like to modify Firefox with the following add-on" - how to disable?

    I am using the latest Firefox (28.0) on Windows XP in a shared computer environment. Although I do not have Administrator access, I installed Firefox myself and can change whatever Firefox config settings I want (including about:config and mucking with the files in the installation directory).
    I want to disable the tab that appears on Firefox startup, "Another program on your computer would like to modify Firefox with the following add-on". This tab usually appears once per day (the first time I startup Firefox each day). I want the tab not to appear at all, from now on.
    The "another program" in question is some program that is used in the facility where I'm using the computer, so I can't just uninstall that program. Although this is a shared computer environment, they don't "wipe" the machine every day, just reboot. So the Firefox I installed is still there with all my config settings intact. As far as I know, I'm the only person who uses Firefox on this computer.
    Solutions that don't work:
    "Just click Continue" -- but then I still see the "Another program" tab every day, and don't want to see it.
    "Click Remove in the Add-ons list" -- I removed the Add-on in question but the tab still appears every day.
    I would like a solution that either eliminates the Add-on request for that particular application, or eliminates all such requests ("Another program...") regardless of what application requested it. The ideal solution would be if the request itself had a checkbox for "never ask this again" but, alas, no such luck.

    Gosh... I spent about an hour preparing a response, then accidentally did control-something or alt-something which took me back a page and I lost everything I typed (even after I clicked Forward to try to get back to where I was). If anyone knows of a config setting like "don't ever trash an entire page of user input unless the user explicitly confirms it", or, "keep form input data even if the user goes Back or Forward", I think that would be a great feature.
    OK, back to the original question...
    I appreciate the responses thus far, but I think there have been some misunderstandings. Maybe a multiple-choice version would help:
    Question: Is there a way to suppress the appearance of the notification tab that says, "Another program on your computer would like to modify Firefox with the following add-on" (meaning, any request from another program to install an add-on is to be silently ignored and discarded)?
    Answer:
    (A) Yes, you can suppress that notification (please state how).
    (B) No, but you can request that feature (please state where).
    (C) No, you can't do that or request that feature.
    That's basically my question in a nutshell. If the answer is (B), I might envision a boolean about:config setting like "extensions.allowProgrammaticAddonRequests" that defaults to "true" and can be set to "false" manually. I think that would be the most direct solution (if it were possible).
    I will respond to some comments from above:
    "I don't understand why you are using a mozilla.cfg file to lock those preferences when you can modify the preferences for your current Firefox profile via about:config" -- This is because the "other program" in question (iCafe Manager) was setting certain config options (browser.startup.homepage, and browser.newtab.url) on every reboot (which happens every morning at that facility). I got tired of manually changing the settings back every day. Using the above-mentioned files, I successfully defeated iCafe Manager's daily interference with those config settings. The other things (like stuff related to Socks tunnelling) I probably could have just set once in about:config but doing a lockPref seemed to do no harm. The settings for "enabledScopes" and "xpinstall" were to see if they'd help with the problem I originally asked about, but they did not.
    "I would look in about:config to make sure those preference modifications are in effect" -- yes, I confirmed that the settings are in effect and locked. That much works as expected.
    "A) removing the iCafe Toolbar extension from the Firefox Addons -> Extensions panel results in the "Another program" tab at startup" -- true, but I think it would be more accurate to say: while the toolbar extension is not installed (due to either having been removed, or, never having been installed at all), the "Another program" tab appears on at least the first startup of Firefox after every reboot.
    "B) when you allow the installation it shows up as "(disabled)" in the Extensions list but the unwanted toolbar still shows up (correct?)" -- yes, correct.
    "You could explain the problem to the system administrator of your facility" -- unfortunately, there's no administrator on site, only a person who makes sure the lights are on. They'll call a tech if there's a catastrophic problem (like the net connection goes dead). Since I installed Firefox myself, and since iCafe Manager is a program they installed, I don't think they'll go out of their way to help me with Firefox (especially if I'm trying to defeat iCafe Manager's attempts to interfere with Firefox). From their point of view, their systems are working just fine.
    "allow the installation and then see if you can go to the Firefox Customize menu and HIDE the toolbar as a workaround" -- since I'm not in that facility now (and probably won't be again until this summer or so), I can't experiment with those systems now. But I do recall clicking just about everything I could, including "View - Toolbars" (which seems to be the same menu as when I right-click on a toolbar line). That menu allows hiding toolbars, but from my recollection, the offending toolbar was not displayed in the list, so I could not hide it that way. Also, the Customize menu ("View - Toolbars - Customize") seems to allow only modifications to a toolbar, and not a way to hide an entire toolbar.
    "it might help if you could post a new troubleshooting information list after you allow the iCafe Toolbar installation" -- ok, that troubleshooting report is included below.
    Thanks again for your help.
    Application Basics
    Name: Firefox
    Version: 28.0
    User Agent: Mozilla/5.0 (Windows NT 5.1; rv:28.0) Gecko/20100101 Firefox/28.0
    Crash Reports for the Last 3 Days
    All Crash Reports
    Extensions
    Name: iCafe Manager Toolbar
    Version: 5.2.0.6
    Enabled: false
    ID: {C058FE28-1E07-4FD1-8092-046F8A964D12}
    Important Modified Preferences
    accessibility.typeaheadfind.flashBar: 0
    browser.cache.disk.capacity: 358400
    browser.cache.disk.smart_size.first_run: false
    browser.cache.disk.smart_size.use_old_max: false
    browser.cache.disk.smart_size_cached_value: 358400
    browser.newtab.url: about:blank
    browser.places.smartBookmarksVersion: 6
    browser.sessionstore.upgradeBackup.latestBuildID: 20140314220517
    browser.startup.homepage: http://www.google.com/ncr
    browser.startup.homepage_override.buildID: 20140314220517
    browser.startup.homepage_override.mstone: 28.0
    dom.mozApps.used: true
    extensions.lastAppVersion: 28.0
    gfx.blacklist.direct2d: 3
    gfx.blacklist.layers.direct3d10: 3
    gfx.blacklist.layers.direct3d10-1: 3
    gfx.blacklist.layers.direct3d9: 3
    gfx.blacklist.layers.opengl: 3
    gfx.blacklist.stagefright: 3
    gfx.blacklist.suggested-driver-version: 6.1400.1000.5218
    gfx.blacklist.webgl.angle: 3
    gfx.blacklist.webgl.msaa: 3
    gfx.blacklist.webgl.opengl: 3
    network.cookie.prefsMigrated: true
    network.websocket.enabled: false
    places.database.lastMaintenance: 1398414928
    places.history.enabled: false
    places.history.expiration.transient_current_max_pages: 53428
    plugin.disable_full_page_plugin_for_types: application/pdf
    plugin.importedState: true
    plugin.state.npgoogleupdate: 1
    privacy.sanitize.migrateFx3Prefs: true
    privacy.sanitize.sanitizeOnShutdown: true
    storage.vacuum.last.index: 1
    storage.vacuum.last.places.sqlite: 1396778909
    Graphics
    Adapter Description: Intel(R) G33/G31 Express Chipset Family
    Adapter Drivers: igxprd32
    Adapter RAM: Unknown
    Device ID: 0x29c2
    Direct2D Enabled: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    DirectWrite Enabled: false (0.0.0.0)
    Driver Date: 11-3-2008
    Driver Version: 6.14.10.5009
    GPU #2 Active: false
    GPU Accelerated Windows: 0/1 Basic Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    Vendor ID: 0x8086
    windowLayerManagerRemote: false
    AzureCanvasBackend: skia
    AzureContentBackend: cairo
    AzureFallbackCanvasBackend: cairo
    AzureSkiaAccelerated: 0
    JavaScript
    Incremental GC: true
    Accessibility
    Activated: false
    Prevent Accessibility: 0
    Library Versions
    NSPR
    Expected minimum version: 4.10.3
    Version in use: 4.10.3
    NSS
    Expected minimum version: 3.15.5 Basic ECC
    Version in use: 3.15.5 Basic ECC
    NSSSMIME
    Expected minimum version: 3.15.5 Basic ECC
    Version in use: 3.15.5 Basic ECC
    NSSSSL
    Expected minimum version: 3.15.5 Basic ECC
    Version in use: 3.15.5 Basic ECC
    NSSUTIL
    Expected minimum version: 3.15.5
    Version in use: 3.15.5

  • Message "another program on your computer would like to modify Firefox with the following add-on" appears every time a new user logs in... Bad problem

    I have just deployed an image to over 500 workstations, and they are all deep frozen using deepfreeze.
    When users are logging in, and open Firefox they are getting the message "another program on your computer would like to modify firefox with the following add-on:" Adobe Acrobat - Create PDF 1.2
    Yes I know u can do a one-time click and allow, but we have potentially 50,000+ students logging into these PCs and it is unacceptable that they are greeted with this message rather than the Homepage.
    This is very dissapointing, as we upgraded to the latest version of firefox in preperation for rollout, and then added some software like adobe.
    The profile is kept in the default user, so everytime a user logs in, they will get prompted with the message, and this will always happen because we use deepfreeze.
    I need a FIX ASAP from mozilla on how to disable this pop-up via Group Policy...
    Not at all happy,
    Sharpy

    Hi,
    One way you could try is to install Firefox on a fresh PC/image which has the same Adobe software versions installed as the clients. You may also have to install the same extensions as well as software for any additional plugins as on the clients. Start Firefox and make sure everything is okay. After that you can copy and overwrite the '''extensions.ini''', '''extensions.sqlite''' and '''pluginreg.dat''' files and probably the '''extensions''' folder and any supporting files of the extensions from this fresh profile, onto a client profile after temporarily disabling/unfreezing Deep Freeze. If everything is okay you can then push the changes onto the other clients via a logon/startup script after temporarily disabling Deep Freeze and then re-enable Deep Freeze.
    [http://kb.mozillazine.org/Profile_folder Firefox Profile Folder]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]

  • I did a mistake in the password and would like to modify my password, how to do it?

    I did a mistake in the password and would like to modify my password, how to do it?

    Assuming you know the current (mistaken) passcode, go to Settings > General > Passcode Lock.  The iPod  will ask you to enter the current passcode.  When you do, you will see a button to enter new passcode.

  • After upgrading to Firefox 9.0.1, on first run after every reboot, the following warning apears for every installed Add-on. "Another program on your computer would like to modify Firefox with the following add-on"

    After upgrading to Firefox 9.0.1, on first run after every reboot, the following warning appears for every installed Add-on.
    "Another program on your computer would like to modify Firefox with the following add-on"
    So, i have to "Enable" my installed Add-ons on each reboot.
    Would you please help me !
    P.S.: I found that these files (and some others) will be deleted on each reboot, and it happens on computer start up (not at shut down)!
    extensions.ini
    extensions.sqlite
    extensions.sqlite-journal
    And as i mentioned, i have the same anti virus on my laptop and desktop, but i have not any problem on laptop.

    Do you have security software that acts like a sandbox or uses virtualization to restore files on a next boot?
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.org/kb/Preferences+are+not+saved
    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.

  • I would like to do a product visualization of a fabric on a shirt, but am not sure where to start

    Hi Everyone,
    I am on a conquest to do a product visualization of a fabric style on a shirt (fabric could be a solid color, striped, or checked). I have access to the fabric and can take pictures/scans of the fabric to extract the exact pattern and would like to overlay it onto an existing picture of a man with a proper dress shirt on to see how the fabric would look on the actual shirt.
    I would like this to be as real as possible so that you could not tell that the fabric was actually "draped" onto the shirt. The result would be something similar to the Perry Ellis website:
    http://www.perryellis.com/Dress-Shirts/pedmdressshirts,default,sc.html
    Could anyone point me in the right direction as to whether this can be done with Photoshop or if there is another alternative method I should pursue? I already have an original with my model in a very flat grey shirt that I would like to modify.
    I would even consider paying a photoshop expert to complete the job but am not sure if what I am asking for can be accomplished yet.
    Thanks in advance!

    Here are the two images (one is of the shirt, one is of the fabric). I can get higher resolution images if needed. What do you think?
    http://www.yourfilelink.com/get.php?fid=768239
    http://www.yourfilelink.com/get.php?fid=768241
    I don't mind it taking a long time, as long as the results are repeatable as I want to be able to do this with 20 fabrics or so and I want it to look as real as possible. I am a novice at Photoshop, would you recommend I pay someone to accomplish this? How long do you think it would take? Is it something I could learn because I plan on doing 20 of them and maybe more?

  • I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.'  Where exactly is it located?

    I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.'  Where exactly is it located?  Here is the link which gives the instructions but doesn't seem to say where the 'Modify Settings Button' is located: http://support.apple.com/kb/PH12526?viewlocale=en_US

    You have to choose – one settigf or another.
    The thing is.your HD clips will look better in an SD project than your SD clips will in an HD project.
    WIthout knowing much more about your project and the kind of content, it's really hard to be specific. But generally I'd let my project settings be guided by what fraction of my timeline will be made up of HD clips and how much SD clips. If it's 75% HD, I'd probably do an HD project…and so on,
    Good luck.
    Russ

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • Can you calculate multiple text boxes to achieve a total value?  If so how is that done?  I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

    Can you calculate multiple text boxes to achieve a total value?  If so how is that done?  I am trying to create a order form where multiple items can be purchased but i would like the values of each item to calculate so I can achieve a total value.

    Hi sashby51,
    I've moved your discussion to the PDF Forms forum--the folks who visit this forum regularly should be able to point you in the right direction.
    Best,
    Sara

  • The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar? Also would like to know if the toolbars can be put on the same line to make more room on the page (drag & drop) ??

    The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar?
    Also would like to know if the toolbar can be put on the same line to make more room on the page (drag & drop) ?? Like the menu & bookmarks toolbar could/should fit on same line. This would add more page view...
    Floyd Perry
    Thanks

    Check that you still have the "Bookmarks Toolbar items" placed on the Bookmarks Toolbar
    * Make sure that you have the "Bookmarks Toolbar" visible: "View > Toolbars"
    * Check in "View > Toolbars > Customize" that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    * If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize window onto the Bookmarks Toolbar
    * If you do not see the "Bookmarks Toolbar items" then click the "Restore Default Set" button
    You can only move the content from a toolbar onto other toolbars if all toolbars support that feature. You need to check that in the options of each toolbar.

  • 'You have already purchased this item, would you like to buy it again?' ISSUES

    This has happened to my twice now. I have bought songs on itunes, then at some point deleted the song from my itunes library and told it to hide it in the cloud or whatever. I only do this so that the songs that are not in my itunes library do not show as being in my itunes library.
    Then, at some point I will decide that I want that song again. So, I go into itunes store and search for it in purchased, and it does not find it. So I then search for it in itunes store again, and it shows it there with the 99p next to it. So, I click on it to buy it, and it shows the message 'You have already purchased this item, would you like to buy it again?'. At first, I clicked no, and was back to square 1, without a song and it still showing the 99p next to it. So I did a search on google and found an article that said as far as I understand to just click buy and it would offer for me to re-download it for free.
    http://answers.yahoo.com/question/index?qid=20090803000006AAKNkBB
    So, I did that and it charged me for it.
    Like I said, it has happened to me twice now, where I remeber buying a song, then hiding it in the cloud, and having to buy the song again. What can I do to stop this?? Is it a bug that I have to buy it again??
    Thanks for your help, Danny

    You read a very old article that applied only to apps.
    Redownloading is quite simple
    Downloading past purchases from the iTunes ... - Support - Apple

  • I would like to know, does Apple Product Giveaways have a page for competitions on Facebook? A lot of People including myself have entered in these competitions and have won and iPhone and many other items. I am one of those people who won, it is true.

    Hi, My name is Sue Keeffe Ayton, I just want to know, does Apple Product Giveaways have a page on Facebook? They are running competition to win Apple Products. A lot of people seem to be winning Apple Products including myself. I saw that I have won a White Iphone 5s 32 GB, I would like to know if this is a scam. If someone goes on the facebook website and type in Apple Product Giveaways you will find this competition page. Please tell me if this page is for real.
    Please I need to know if this is for real.
    A lot of poeple including myself have entered these competitions and have won. I have tried to contact this page admin, but was unable to. I have even tried to contact Facebook team to find out, but was unsuccessful at this point in time.
    I am not sure if these people who are running these competitions are going to send these items out to the winners. I hope they do. If you enter a competition/s and you win, you would expect to receive your winning item/s.
    I never thought it was possible to win something on Facebook. When I saw my name pop up on the winners list in Apple Product Giveaways for March 2 2014 I was excited. I am one of 5 people who won an Apple product.
    Below you will see Apple Product Giveaway page on Facebook. On the right you will see the competition winners. I hope someone can help me find out the truth and if its fake, I will report this to Facebook to have this page shut down. A lot of people will be hurt, disappointed and very angry this has happened
    I hope you will show your support and help me solve this.
    If this is not the right site to report this or find out if this is a scam, please guide me to the correct area.
    Thank you for your attention.
    Sue Keeffe Ayton
    Sydney Australia
    <Personal Information Edited by Host>

    Apple does not give away its products.
    Unless you are the 1,000th person to show up at a new Store and Tim Cook is there and his assistant is filming you to be posted on their Home Page.
    That is yet another FaceBook SCAM.

  • I had an in-game purchase that failed to give me my items purchased, this is usually an easy fix, but this one was through EA, I would like to know what steps I can take to rectify this.  (I realize that NOT playing EA games is the best answer...)

    I had an in-game purchase that failed to give me my items purchased, this is usually an easy fix, but this one was through EA, I would like to know what steps I can take to rectify this.  (I realize that NOT playing EA games is the best answer...)

    Can you try to restore your inApp?
    If that doesn't work:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • Hi , I would like to ask you about purchase item transfer to ipad from mac book Itunes, But This message will be notified on screen this ipad could not be synced because this computer is no longer authorized with that purchased item on this ipad.

    Hi ,
    I would like to ask you about purchase item transfer to ipad from mac book Itunes, But This message will be notified on screen
    "This ipad could not be synced because this computer is no longer authorized with that purchased item on this ipad"
              I did authorized in the store, but still did not transfer to the mac. Could you please to tell me what should I do it? Please let me know that as soon as possible.
    Regards,
    Thank you

    The iPad is fine.  But the computer you're syncing with needs to be authorised with the Apple ID that was used to buy the material on the iPad.  You do this by picking the 'Authorize' item from the menu in iTunes and entering the account name and password.

Maybe you are looking for

  • How can I associate my Phone number to iMessage and FaceTime function?

    Hi, I need help to resolve a problem that a have in my iphone (iphone 5 with IOS 6.1). I have the iMessage and Facetime associate to my ID apple email. However a would like to associade to my phone number but I dont have da number listed in iMessage.

  • Xorg.conf

    Hi, I configure a default xorg.conf and put it in /etc/X11/xorg.conf. I generated it with Xorg -configure. No when i start the server i get the error: Failed to initialize GEM. Falling back to classic. suggestions ? Last edited by p33w5t3r (2009-04-2

  • Unable to import table in owb 9.2

    i am using warehouse builder 9.2 and database 9i R2 the source databse is also oracle 9i R2 when i create a source module to import the required tabe metadata i found that some table did not apper in the available objects i discovered that for those

  • Fully qualified elements in clientgen ant task

    I think that ant clientgen task from WLS 10.3.3 is ignoring XSD parameter elementFormDefault="qualified". I generated client with this task and then sent simple request to webmethods server (i don't know version of this server either implementation o

  • Effects of Filter Logic on Performance/Load Time

    Hi everyone, I need to know if the following 2 logic staements/filters are different and whether it would cause a difference in the performance/loading time of the report. 1. *{* 1 AND 2 AND +[+ _(3 AND 4)_ OR _(5 AND 6)_ OR _(7 AND 8)_ OR _(9 AND 10