Final output on DVD

I have some shots in full HD 1920*1080 (shot in SONY PMW ex 1) and some in *. Mpeg ( shot in SONY HDV) . Which seq setting should I use and edit it if my final output was to come out on DVD. Or it doesn’t matter whatever sequence  setting I used?  Any help/advice?
Cheers
Danny

Edit in HD and export as MPEG2-DVD and use the 2 (audio and video) files in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Similar Messages

  • High and low sound in the final output to DVD.

    At playback, the audio at the DVD menu is loud compared to the movie on the DVD. In FCP, I am staying below the 0dB with the audio so that it doesn't become distorted. In DVDSP, I can't control the volume. The menu audio is way too loud. its like that on all the DVDs I Make. How can I fix this?

    You can't… in DVDSP.
    Revisit your FCP project and adjust your levels. 0 dB is too high. You should be aiming for a range of -12 to -6 in FCP. In Compressor, for the audio stream, set dialogue normalization to -31. If you bring that into DVDSP your DVD should now sound right.
    Good luck.
    Russ

  • Final output to DVD / 16:9 TV Viewing

    What are the best settings to use (Size, Compression, etc) when the destination will be to DVD, ultimately for viewing on a 16:9 Plasma TV?
    The original was shot at HD 1080i.
    Thanks,
    Lyman

    ...thats it? I take it that method produces a native copy sans for the HD resolution since the technology isn't there?
    Thanks Tom,
    Lyman

  • Final Output & DVD Question

    Hey Everyone,
    I recently completed a short film and exported to Quicktime at the highest level and the film looks fantastic.
    When I sent it to Compressor at the best quality I could get and outputted to DVD, it still looks good, but if I get close enough to the screen I can see some very minor lines around the edge of things (like an actors head or a closeup of a piece of paper, etc). Is this normal with compression rates on a DVD? Should the image be as crisp as the QT .mov file? Is there a way to make it crisp?
    After briefly reviewing a film I own DVD, I am thinking it is normal, but I wanted to make sure. I am getting ready for the film festival submissions...and may be using a DVD to screen off of in certain festivals.
    Since I shot with the Canon HV-40 in 24p mode and captured the settings at 23.98, I wasn't sure if deinterlacing would be beneficial or not.
    Look forward to your thoughts/knowledge.

    Hi Ben,
    I did not edit with a real production monitor (I plan to get one in the future) I edited on a the 27 inch IMAC. My TV is not HDTV either, but is 16:9 frame. '
    When I was in Compressor preview mode, I even noticed these flaws there. It sounds like this is most likely the norm when it comes to this. Is that correct?
    Also, I spoke with Apple yesterday and they told me to just export by sharing from Final Cut Pro directly versus using Compressor and to use Dual Layer DVD's. Not sure if that made much of a difference or not.
    - Eric
    Message was edited by: EPCFitness

  • Final output of Final Cut Express HD 3.5 is blurry and out of focus.

    Using clear/sharp '.mov' files as clips. Doing simple editing, nothing fancy. When I finally output the project using 'Export/Using QuickTime Conversion,' the final is blurry and out of focus. I've tried every compression type (H264, Animation, etc.). Same problem. Anyone know why this is happening?
    Although the specs for my computer are well within the Final Cut Express guidelines (I've even upgraded my graphics card to a Radeon 9800 Pro 256 MB), I'm still thinking that perhaps the G4 I'm using doesn't have enough juice to run the FCE software. By the way, I don't have any other programs active when using FCE. Any help on this would be greatly appreciated. Thanks.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB)   Mac OS X (10.4.9)   2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

    Thanks for your response.
    Here's what I'm (trying) to do:
    I'm creating short 5 minute tutorial movies that will be distributed as QuickTime movies (burned to disk) for short run distribution (college).
    Here's the process: the movie itself is a recording of monitor screen actions recorded (audio and video) using Snapz Pro movie mode. The recorded size is 800 x 600. There might be 5 such 1 or 2 minute clips. The quality is excellent. I bring them in to FCE, drop all the clips on the same track, and add simple transitions. That's it.
    Now I need to somehow get a final QuickTime movie, with close to the same quality I had in the clips.
    So... I take the FCE file, output it using 'Export>QuickTime Conversion,' using the same size I originally recorded in, 800 x 600. Tried every codec available. Every time, the end result is a very blurred version of the original Snapz Pro recordings.
    I've even tried outputting the FCE file as 'Export>QuickTime Move' (not using the conversion method). Opened that up in QuickTime Pro with the same result: blurred and out of focus.
    I'm viewing the exported file in QuickTime Pro, with the 'Movie Properties' setting of 'High Quality.'
    Any clue? This is driving me crazy. But I'm determined to get this right.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

  • Is the canvas something like "the final output"? Or is that the viewer?

    I am making a video of my HD footage i shot with my Full HD Camcorder (Sony HDR-SR12).
    When i go through te timeline and play something, it shows fully in my viewer, but in the canvas i get only a selection of the full image (it seems that it is zoomed in)... So, my question is, do i have to "make the video smaller" by choosing image+wireframe in the canvas? Because i am afraid that when i output on to a DVD, i will also get the zoomed-in video? Or is the Viewer the "final output?"... I am getting crazy, because i can't let two or more clips play after eachother in the Viewer, right?
    Also, what is the best way to output my full HD footage? (without loosing to much quality) Just click "Export -> Quicktime Movie"? Wil quicktime not lose the HD? Thanx...

    The canvas always displays the final result and quality of your editing in the current sequence in the timeline; the viewer is just a way to monitor single clips (not the composition of clips as in the canvas) and displays the quality of the clip usually before you edit it into the timeline.
    This is important, because if (for example) your sequence (in the timeline) is a standard DV while your captured clips are HD, when you look at a clip in the viewer opened from the browser, you watch it at +HD quality+, when you drag (edit) the same clip into the timeline it is down-converted to the +DV lower quality+; and this is what you see in the canvas. Instead if you open a clip from the timeline (not browser) in the viewer, you see the exact same quality as in the canvas, but only for that single clip. So the best way is to always check quality in the canvas, since it shows the result of all your editing, conversions, and composition, as it will show up in the exported movie.
    Now, to really verify the result in the canvas you must also make sure to:
    - use Fit to Window (from the small zoom button on top of the canvas window) when you want see the full frame and its composition, but not the final quality
    - instead use 100% (same button) to see the final quality for HD
    - or even better connect the firewire output to an HDTV through a HDV deck (or camcorder) for HD, or to a standard TV through a D/A converter (or camcorder) for standard DV. The advantage of this solution is that you see the final result on the final output device while editing, without having to burn DVDs to check it (and this is almost mandatory when you import images and want to have control over interlacing artifacts).
    When you export to iDVD you always use Export/Quicktime Movie even if you burn the DVD on different Mac; if the burner is on the same Mac you can uncheck the Make Movie Self-Contained option, so the file will be smaller and the export faster; otherwise you leave that option checked, and the file will contain all video and audio media necessary for burning (but the file much larger, and export much longer).
    One more note: the Image+Wireframe option in the 2nd small button on top of the canvas (or also viewer) window allows you to apply changes to the frame size and position directly in the canvas without using the Basic Motion control of the viewer; in any case, whatever change you apply and you see in the canvas will be reflected also to the exported movie.
    My guess in your case is that you are using a wrong (standard DV) setup for your sequence even if you captured HD, and that probably you zoomed in too much so that both the canvas and the exported movie show a small portion of the original frame.
    I hope this helps a bit
    Piero

  • HD to SD final output question

    Hello Forum,
    I have just completed Jeff Bellune’s excellent HD to SD tutorial called “hd2sd - High Quality Scaling From HD to SD”. For weeks I have been trying in vain to downscale my 1920 x1080i AVI-8bit YUV HD footage for output to PAL DVD without much luck, resulting in terrible output quality, but for anyone experiencing the same problem I would like to let you know that the quality of the conversion with Jeff's method is absolutely amazing. http://bellunevideo.com/tutlist.php Thanks for the post Jeff you are a star!
    But I have one small problem. In the final process when using VirtualDub to open your AviSynth script file and then saving it out to a Lagarith AVI file.
    The process works as described with great results however the final output file is exported at an output size of 720x576 - 1.250 (5:4) aspect ratio. (Size data extracted from GSpot) The problem is when I import this into Encore the footage does not fill the whole screen.
    My to the forum question is does anyone know how I can change the output file size in VirtualDub to a (16.9) aspect ratio so that when imported into Encore the footage takes up the whole screen in a (16:9) widescreen format.
    Can VirtualDub be used to do this and if so does anyone know the exact settings to be used?
    Any assistance with this will help me greatly.
    Thanks in advance.
    Rex.

    Thank you Jeff
    You are a brilliant person, thank you very much as you solved my long standing and draining problem in one answer!
    The output result is second to none as a matter of fact I can’t even tell the difference from the original footage!
    Everything is fine now but while the Big man himself is about I wonder if you could possibly answer these 3 questions?
    1) I am using Premiere CS5.5, Should I have used the Maximum render quality setting when exporting my MPEG2 file from premiere (this wasn’t mentioned in the CS4 tutorial)
    2).My original source footage used in my test project is 1920 X1080i (1.0) 50Hz Pal - and I have exported 3 versions, one Lower field first, one upper field first and one Progressive no fields. Using the Interpret Footage techniques from your advice I created 3 separate Encore projects in each field setting the thing is I can’t tell the difference between them in my test DVDs. (Q. which field setting do you recommend me use for my final project output to Pal DVD (Note Encore Pal Project settings make reference to Lower field first).
    2) Could I re-import the exported VirtualDub avi file back into premiere. Then edit my project adding effects and titles and when the project is complete export the finished project into Encore either by uncompressed AVI or MPEG2-DVD?. If this is possible will I lose much quality on export? And would you know how I could Interpret the Footage to PAL Widescreen (1.4587).in premiere? (I ask this as it would be much easier to edit with these smaller files as my original files are very resource consuming)
    Again I would be most grateful if you have some advice on these questions as I am a newbie to HD editing but embracing the challenge.
    Thanks again.
    Rex.

  • Export quality poor on final output

    I'm working on a macbook pro using iLife09.
    I've edited everything in FCE 4 and the final output after burning in idvd has 3 movies on it and one of them, about halfway through, continues to have a very pixelated section lasting about 1 minute. it plays choppy and blurry.
    in fce 4 I exported>quicktime movie. I've tried making it self contained and not self contained. Same results on both. I use verbatim dvd-R, burn at slowest possible speed, and at professional quality. I've repaired disk permissions, deleted idvd prefs, and saved as "disk image." the results are the same on the disk image. I think this means it is an encoding/burning problem.
    All my audio has been converted to .aiff and is 44.1 KHz.
    is this an export issue within FCE 4? what other options should I try?

    thanks for your quick response. I've been working on it ever since.
    the exported QT movie does not display the pixellation.
    I switched it to Best Performance as opposed to Professional Quality, but this didn't solve the problem. It seems that the content was too close to filling up the capacity of the dvd. once I shortened the content, the problem went away.
    thanks for the suggestions, this gives me other options when other things go wrong in the future.

  • Outputting a DVD To Flash Video in Encore 3 Under Leopard

    This topic is indirectly related to Final Cut Pro 6 (since it is the source of my Quicktime movies in Encore 3) and I post it here because I have had no luck getting any responses on other forums including the Creative Cow and Adobe forums.
    I have recently purchased the Adobe Production Premium package and successfully prepared several Blu-ray and standard definition DVD's using Encore 3. However, whenever I attempt to output any of these DVD's to Flash Video by selecting Build>Output to Flash from within Encore 3, my menus transcode, but when Encore gets to my timeline video, the progress bar goes to about 20% almost instantly and remains there forever. I have tried several different types of video files including short Quicktime movies created in Final Cut Pro as well as other formats in the Encore 3 timeline. The result is always as given above. When this happens, I finally have to Force Quit Encore 3 because selecting cancel on the transcode give me an endlessly spinning beach ball.
    I am running Encore 3 (latest updates installed) on an 8-core Mac Pro (Early 2008 model) with 12 GB of RAM and under Leopard 10.5.4 (latest version with all updates installed). I have successfully transcoded these timelines that seem to freeze Encore 3 using MPEG SlipStream so I know the files are OK.
    Is anyone else having this problem? Is there any solution to the problem? Does output to Flash simply not work under Leopard?
    I have written to Adobe Tech Support. I have received no response from Adobe. I feel that someone on this forum must be using Encore 3 (since it is one of the few ways of getting Blu-ray DVD authoring on the Mac) and has tried to output the DVD as Flash video from within Encore 3. I am simply trying to determine (1) if this is a known issue when running Encore 3 under Leopard; (2) if there is any fix to get Output to Flash working from within Encore 3.
    Thank you in advance for responding.
    Tom

    David,
    My hat is off to you for persevering with Encore 3 and getting it to output flash video. AFter reading that you had gotten it to work, I was inspired to try once again. This time I encoded my timeline to DVCPro HD by exporting the FCP project to Compressor. I then took this timeline (an 11 minute video) into Encore 3 and tried to build a flash DVD. I have a main menu and scene selection menu, and they both transcoded fine in about 20 minutes, but once again when Encore got to my timeline, the progress bar moved to about 1-2% and simply stayed there. After 7 hours I finally gave up and canceled the transcode which had never progressed any further and did a Force Quit on Encore.
    I noticed in doing the above, that during the transcode of the menus Activity Monitor shows my cpu is reading 170-190 and varying as you would expect. Once Encore hits my timeline and begins the transcode of that, the cpu drops to 100 and remains there with no real sign of activity.
    Can you tell me if your DVD that you successfully output to flash with Encore 3 had chapter marks in it? I am wondering if they could be the trouble. Some people have indicated that they solved the problem by going back to an earlier version of Quicktime. I am using version 7.5 of Quicktime, which is the latest version. Can you tell me what version of Quicktime you are using on the Mac that succeeded in outputting to Flash video using Encore 3?
    Thanks again for your help.
    Tom

  • Final Output - manage my expections

    I'm new to FCP and I'm about ready to export my first project for DVD authoring. I realize that the authoring process will require some trial and error. However, for right now, I just want realistic expections about the resolution quality of my final output. I recognize that a DVD version of my project could never look as sharp as the Canvas. However, is there any reason to believe that the final product can look better than it currently does on my external monitor (a 14" television set)??

    I recognize that a DVD version of my project could never look as sharp as the Canvas. However, is there any reason to believe that the final product can look better than it currently does on my external monitor<<</div>
    You recognize that viewing highly compressed DVD footage won't look as good in the Viewer as the original un or less compressed original footage ... but you don't see how that correlates to when you're viewing on an external TV??
    To answer your question; no. DVD-Video is highly compressed and therefore suffers a quality loos when compared to the original. But like anything else, DVD-Video is GIGO (garbage in, garbage out). The better quality your source footage is, the better the quality it will be after compression.
    -DH

  • After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?   So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

    After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
    So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
    Is it possible to see what iDVD did?

    I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
    The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
    The value of Compressor is that it gives you control over the many parameters that affect size quality.  and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
    Good luck.
    Russ

  • Speedgrade CS6 won't apply my Look in the final output

    So I have this problem where I try to output a quick color graded version of my source footage, but the final output shows no difference.  In other words, I import DSLR footage, make all the necessary adjustments (in this case I just applied a look that I saved previously) in SG then render it out as a ProRes 422.  The ProRes version looks the same as my source (DSLR) footage (minus a few megabytes) and doesn't look as if my saved look was ever applied.
    My Output settings are as follows: (NOTE: I have changed all of my output settings trying to solve this problem and, no dice.  So I can only assume that it's not a problem with my output settings)
    Output:
    Format & Options = Apple ProRes 422.  Automatic color calibration = Unchecked.  Write ALE file to output path = Unchecked.  Render annotations = Checked
    Use the same burn-in as playback, No calibration lookup table, Time code source = Source
    Framing:
    Full Image (No Proxy).  1:1 (square).  1080p
    Render
    Offline Quality (fast).
    My system specs are:
    Mac Pro OS X 10.10.1 (Late 2013)
    3.5 GHz 6-Core Intel Xeon E5
    16 GB 1866 MHz DDR3 ECC
    AMD FirePro D500 3072 MB
    Hop I provided enough info.
    Any help is appreciated.
    Thanks!

    With your theory in mind of it being a permissions problem, I went ahead and moved my Looks from an external drive to my computer.  Still no dice.  Although, do you believe that it might need to be in a particular place on my computer?  Like say, a SpeedGrade folder inside and Adobe folder inside my library folder?  I don't see why that would matter.  I found a rather time consuming fix.  If I open the Look in After Effects, I can apply it to the video clip but that's just a little convoluted.
    I'll keep searching for a solution and post any updates.  Thanks for your help thus far!

  • Data Mismatch in the final output

    Hi,
    I am using the eclipse version downloaded from here
    http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp
    In the final output, data seems to be corrupted.
    Example
    Column A
    3500
    9852
    7533
    Sum 35.4
    The sum value reflects the right value, where as the value in column A  is displayed from a different page.
    In short the Column A values are randomly swapped between pages.
    I tested the same report with Visual Studio with the same parameters. It works fine.
    Can some one please provide me a direction.
    Thanks
    Raman

    For your questions,
    1. I have this problem when previewing report in the crystal report viewer. This is not specific to exporting to a third party format, Previewing and even exporting to PDF results in same incorrect output.
    2. I tried exporting it to RPT format and its resulting in exception, See below the exception stack.
    380416980 [TP-Processor23] INFO  com.crystaldecisions12.reports.dataengine  - Validating report parameters
    380416980 [TP-Processor23] ERROR com.businessobjects.reports.reportconverter.v12.V12Converter  - ERROR: Could not convert saved data
    com.crystaldecisions12.reports.dataengine.MissingParameterValuesException: Some parameters are missing values
         at com.crystaldecisions12.reports.dataengine.h.a(SourceFile:802)
         at com.crystaldecisions12.reports.dataengine.SavedDataUpdater.a(SourceFile:85)
         at com.businessobjects.reports.reportconverter.v12.V12SavedDataBackwardConverter.do(SourceFile:450)
         at com.businessobjects.reports.reportconverter.v12.V12SavedDataBackwardConverter.a(SourceFile:380)
         at com.businessobjects.reports.reportconverter.v12.V12SavedDataBackwardConverter.if(SourceFile:292)
         at com.businessobjects.reports.reportconverter.v12.V12SavedDataBackwardConverter.do(SourceFile:108)
         at com.businessobjects.reports.reportconverter.v12.f.do(SourceFile:377)
         at com.businessobjects.reports.reportconverter.v12.V12SaveLoader.a(SourceFile:316)
         at com.businessobjects.reports.loader.ReportSaver.a(SourceFile:75)
         at com.businessobjects.reports.loader.ReportSaver.a(SourceFile:62)
         at com.businessobjects.reports.loader.ReportSaver.saveCopyAs(SourceFile:52)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:616)
         at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.a(SourceFile:686)
         at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.if(SourceFile:736)
         at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.if(SourceFile:619)
         at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.a(SourceFile:586)
         at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.a(SourceFile:636)
         at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.int(SourceFile:672)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1944)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
         at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
         at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
         at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
         at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
         at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:1558)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:337)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(SourceFile:286)
         at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(SourceFile:209)
         at com.businessobjects.report.web.event.bh.a(SourceFile:158)
         at com.businessobjects.report.web.event.o.a(SourceFile:146)
         at com.businessobjects.report.web.event.bw.broadcast(SourceFile:93)
         at com.businessobjects.report.web.event.am.a(SourceFile:53)
         at com.businessobjects.report.web.a.t.if(SourceFile:2104)
         at com.businessobjects.report.web.e.a(SourceFile:300)
         at com.businessobjects.report.web.e.a(SourceFile:202)
         at com.businessobjects.report.web.e.a(SourceFile:135)
         at com.crystaldecisions.report.web.ServerControl.a(SourceFile:607)
         at com.crystaldecisions.report.web.ServerControl.processHttpRequest(SourceFile:342)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.a(SourceFile:109)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.doPost(SourceFile:69)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
         at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
         at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:291)
         at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:774)
         at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:703)
         at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:896)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
         at java.lang.Thread.run(Thread.java:636)
    380416981 [TP-Processor23] INFO  com.businessobjects.reports.reportconverter.v12.V12Converter  - Converting to version 12 finished successfully
    380416982 [TP-Processor23] ERROR com.crystaldecisions.reports.common  - Failed to load the resource 'InternalFormatterException' from the bundle java.util.PropertyResourceBundle@58fd36e4.
    java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key InternalFormatterException
         at java.util.ResourceBundle.getObject(ResourceBundle.java:402)
         at java.util.ResourceBundle.getString(ResourceBundle.java:362)
         at com.crystaldecisions.reports.common.CrystalResources.loadString(Unknown Source)
         at com.crystaldecisions.reports.common.CrystalResources.loadMessage(Unknown Source)
         at com.crystaldecisions.reports.common.CrystalResourcesFactory.getLocalizedMessage(Unknown Source)
         at com.crystaldecisions.reports.common.CrystalException.getLocalizedMessage(Unknown Source)
         at com.crystaldecisions.reports.common.CrystalException.getMessage(Unknown Source)
         at java.lang.Throwable.getLocalizedMessage(Throwable.java:284)
         at java.lang.Throwable.toString(Throwable.java:360)
         at java.lang.Throwable.<init>(Throwable.java:259)
         at java.lang.Exception.<init>(Exception.java:94)
         at com.crystaldecisions.reports.common.CrystalException.<init>(Unknown Source)
         at com.crystaldecisions.reports.common.CrystalException.<init>(Unknown Source)
         at com.crystaldecisions.reports.exportinterface2.exceptions.ExportException.<init>(SourceFile:22)
         at com.crystaldecisions.reports.exportinterface2.exceptions.InternalFormatterException.<init>(SourceFile:15)
         at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.if(SourceFile:763)
         at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.if(SourceFile:619)
         at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.a(SourceFile:586)
         at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.a(SourceFile:636)
         at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.int(SourceFile:672)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1944)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
         at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
         at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
         at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
         at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
         at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:1558)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:337)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(SourceFile:286)
         at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(SourceFile:209)
         at com.businessobjects.report.web.event.bh.a(SourceFile:158)
         at com.businessobjects.report.web.event.o.a(SourceFile:146)
         at com.businessobjects.report.web.event.bw.broadcast(SourceFile:93)
         at com.businessobjects.report.web.event.am.a(SourceFile:53)
         at com.businessobjects.report.web.a.t.if(SourceFile:2104)
         at com.businessobjects.report.web.e.a(SourceFile:300)
         at com.businessobjects.report.web.e.a(SourceFile:202)
         at com.businessobjects.report.web.e.a(SourceFile:135)
         at com.crystaldecisions.report.web.ServerControl.a(SourceFile:607)
         at com.crystaldecisions.report.web.ServerControl.processHttpRequest(SourceFile:342)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.a(SourceFile:109)
         at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.doPost(SourceFile:69)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
         at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
         at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:291)
         at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:774)
         at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:703)
         at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:896)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
         at java.lang.Thread.run(Thread.java:636)
    Edited by: muthusada on Jan 11, 2012 3:09 AM

  • Keep Time Codes in Final Output?

    For various reasons I won't bore you with here, I want to show the time codes in my final output. I have them (audio and video) on the canvas, and it's exactly what I need, but I can't seem to permanently keep them with my video. They disappear when I play or export the video. Does anyone know of a way to keep the time codes on the screen somehow for final output? I'm using FCP 6.02 and my video is HD1080i50 if that helps.
    -JOEL

    Oops....never mind. I found the answer to this in another post on this forum. Missed it the first time I searched.
    Sorry.......

  • When I apply a plug in compressor on the final output track I get a click

    1/I am applying a compressor on to a particular point of the track (in the final output track) and naturally all tracks go louder.. however my problem is at that point where the compressor switches on from its previous bypass status, I get a click. this is a problem I always have when suddenly I introduce a 'serious' plug into the final mix... your suggestions will be very welcome
    2/ While my output never goes over 2.0 below the threshold 0.0 some times the final mix gives me much unwanted buzz in the speakers which must come from individual samples - probably samples that cant take that sort of compression- is there a standard way or a more conventional approach to compress the final mix so you get the loudness of everything still without buzz... a particular logic setting that seems to work for many cases perhaps with instrumental and orchestral work?
    3/ would you compress track by track first and go through everything in this laborious way or just experiment on the final output track is equally the same?
    I ll be grateful for any valuable advise..

    Gosh, that was quick! Or perhaps you were just way ahead of me…
    1 • This may not be the answer if it really is happening with many plug-ins, but you can get a click when a compressor cuts in if the attack setting is too short. And if the mix is getting louder at that point, you might consider turning down the gain on the compressor.
    2 • If you're compressing a whole mix, then individual samples are not going to be "unable to take it". Check for the buzz with the speaker volume turned right down, or in headphones, or examine the final stereo mix audio file to look for clipping… because it may just be the speakers. If it's still definitely there, you need to find the source of the distortion, & the best way is to eliminate possible sources one at a time. Compression wouldn't be my preferred suspect, unless you have the gain cranked up. Which in light of the above, perhaps you have!
    3 • Compression on the whole mix should be as effective as on individual tracks, but this is assuming you have already taken care to ensure your tracks are in a fit state. Compression introduces noise (can't be helped!), & in a mix it may be hard to hear just where that pesky noise is coming from… whereas if you check out individual tracks you may suddenly realise that by compressing that guitar you have made the amp hum REALLY LOUD when the guitar isn't actually playing. Time for a Noise Gate on that track!

Maybe you are looking for

  • BAPI for Service contract

    Hi All Have anybody used BAPI_CUSTOMERCONTRACT_CHANGE. I need to change the unit costing in the contract. To go to unit costing in VA42 transaction, we have to use (ctrl+f7 or Extras ->Costing) Please let me know, if anybody used any other BAPI to ad

  • LiveCycle and Adobe Reader

    Is there an update to allow people to open LiveCycle Forms in Adobe Acrobat Reader 9? I have made a form but when I publish it, it can only be edited and saved in Reader 8.0 or later and all of the other people who need the form have been update to R

  • Player keeps freezing!

    I have: Windows 7 IE 11 Flash Player 15 First, for some reason my Flash player disappeared.  Then when trying to install it, I kept getting "IE is still running", had to chase down where it was running.  Got that handled and finally installed the rec

  • How can i use the parallel port

    I was wondering how to adress my PC´s parallel port. I did'nt find a suitable VI in the palettes. Do I have to read/write somehow directly to the port adress in memory 0378 ...? If so, how can this be done ? Thanks for any help, Holsch

  • To create login form using swing with sqlserver as backend

    hi. can anybody send me code to create login form using swings . thnaks in advance.. sj