Final Review doesn't match screen
I've made a book using iPhoto and when I was done I clicked on "Preview Book". The program will then "assemble" the book and it has helped me detect that some photo files needed to be adjusted for size.
Problem is that the backgrounds appear different. I don't see any greys in the book. The pages I show as grey backgrounds when assembling, indicate white on the preview. Maybe it's because the grey pages are really a photo background and it's only grey to indicate that feature but never intended to be grey.
Any thoughts will be helpful. I'll continue to play with it. Thanks, Craig
found out myself
Similar Messages
-
Photosmart Plus B209 printout doesn't match screen
I always have a problem when printing out images with my HP Photosmart Plus B209 All in One. For instance, I make 2 in x 2 in images for passport photos. I create the images in a digital editing program in a 2x2 size and then drop them into MS Word for printout. On the screen, the picture size shows as 2 in x 2 in, but when I print it out, the picture is closer to 2 1/16 inches x 2 1/16 inches. And if I print a borderless 8.5 in x 11 in and the image has a frame, often either one of the sides or the bottom of the frame is cut off some. I have tried Scaling, Not Scaling, Fit Image to Page, Print 100%. I also have this problem with Microsoft Publisher when printing a banner. Although the Print Preview shows perfect alignment, when I print them out they don't quite match. Does anyone know what I might be able to do to fix this problem? I always do a scan and alignment when I change my cartridges and the quality of the print is great, but it just doesn't seem to print at the right size. It's not off by much, but enough to ruin the effect of certain images. I'd appreciate any feedback that someone can give me on this. Thanks so much.
Page 7 of the manual only references WPA and not WPA2. I did search the manual for mention of WPA2 and did not find any. This indicates it does not support WPA2, so this could be an issue. However, this typically does not prevent the printer from seeing the network but only connecting to it.
While the wireless radio is more than likely functioning, it may be best to confirm it is working since it is not seeing the SSID. Go to setup>network> wireless network test.
Does it show anything as failed? If so, what items are marked?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
I somehow managed to transfer some files from WORD on my PC to PAGES. I now want to delete them from the iPad but what I am seeing on screen doesn't match what the instructions say. In particular, the reference to APPS pane being in iTunes doesn't appear to match ( the sync procedure seems to have gone through its 4 stages OK) and I can't find reference to FILES. Can anyone help please.
IanCan you delete them in Pages on your iPad?
Start Pages and go to the screen with thumbnails of all your documents. Tap on edit. Select the documents you want to delete then tap Delete.
If the documents are in the iTunes File Sharing area on your computer start iTunes on your computer. Use the View Menu in iTunes to View Sidebar.
Connect your iPad and select your iPad in the left sidebar of iTunes on your computer.
Select Apps in the right window.
Scroll down under Apps to find the File Sharing section. It is below the first list of Apps.
Find the Pages app there and delete the documents. -
Video copied to DVD doesn't match project I can see
Okay,
Probably another basic question but I can't find an answer in the Adobe manual. I just discovered (after burning 8 copies of the same file) that the movie on the DVD doesn't match what I see in the Project screen. The dropdown of the Organize>Project looks like what I want to see except that it seems to have the original avi file that I subsequently edited as well as the edited file. The sceneline looks correct. The timeline looks correct. I have tried eliminating the "markers" but there weren't any to eliminate - the menu drop down only gave me the option to add markers. One hint is that the DVD is picking up a menu template that I was playing with but couldn't get to work and then deleted. I ended up using the very basic title screen with black video from the top line Title dropdown menu instead of the Template option in Edit. I can see the new title in scene and timelines. Again, per previous question just posted, I see nothing in the clip screen
(i.e. th boxes) under "organize". Also, the video clip on the DVD appears truncated by approx. half the play time.
At one point I could get only the old menu template clip to show up just below the montor screen but couldn't figure out how to delete.
thxCamcorder is a Sony Handcam D8 Digital Video, not minidvd. Tape was transferred using Adobe Premiere elements 9 with brand new firewire.
First screen capture below shows only one of two black screen titles upon opening program. Nothing in media boxes. Second Capture shows frame of video clip as a result of double clicking on the third sceneline box. Third screen capture shows what the DVD opens with when played after burning. I have tried to create this from scratch but can't get rid of the fancy menu screen in the third screen capture below. Replaying the movie using the sceneline or timeline prior to burning the DVD doesn't show the "fancy picture frame" with the "play movie" option shown in the dvd playing in the third capture below. Does this help? It seems to be something like an invisible preset that I can't get rid of.
C -
The pt 3 tutorial code doesn't match the pt 2 tutorial code. Nowhere to insert head in pt 2 code.
At the end of the part 2 tutorial, this was the code:
@charset "utf-8";
/* CSS Document */
#container {
width: 968px;
background: #FFF;
margin: 0 auto;
padding-left: 10px;
padding-right: 10px;
overflow: hidden;
}#main_image {
background-image: url(images/main.jpg);
background-repeat: no-repeat;
#container #main_image {
height: 376px;
width: 968px;
#left_column, #center_column, #right_column {
width: 316px;
float: left;
#center_column, #right_column {
margin-left: 10px;
The part 3 tutorial instructed this:
Copy the <script> tags from the Edge Web Fonts site, and paste them into the <head> section of index.html in Dreamweaver just above the <link> that attaches the style sheet like this:
<head>
<meta charset="utf-8">
<title>Check Magazine</title>
<script src="http://use.edgefonts.net/sarina.js"></script>
<link href="styles/check_cs6.css" rel="stylesheet" type="text/css">
</head>
As you can see from the code at the end of part two (listed at the top), there is no reference to <head> anywhere in the code; therefore, I am uncertain as to where to insert these code instructions.I assume that the embedded tags are in the index document, not the styles type document? I appreciate the information, but I don't see how it relates to my question. Maybe your answer was just over my head? My original question was: If the instructions say this:
Copy the paste them into the section of index.html in
Dreamweaver just above the that attaches the style
sheet like this:
and there the word does not appear anywhere on the index file that I can see it (whether it's embedded or otherwise), where do I insert the code?
Date: Fri, 8 Feb 2013 10:29:29 -0800
From: [email protected]
To: [email protected]
Subject: The pt 3 tutorial code doesn't match the pt 2 tutorial code. Nowhere to insert <head> in pt 2 code.
Re: The pt 3 tutorial code doesn't match the pt 2 tutorial code. Nowhere to insert in pt 2 code.
created by Nancy O. in Dreamweaver - View the full discussion
The pair of and tags are an integral part of any HTML document. When you create a new page in DW, it automatically creates the core HTML tags for you, so in that regard, there's nothing for you to add except content and styles. Embedded CSS styles are inserted inside the document's tags like so: body #LeftSideBar #RightSideBar #MiddleContent
External CSS is a separate physical file to which all your HTML pages are linked. Similar to above, links to external style sheets go inside the tags like this:
HTML & CSS Tutorials - http://www.html.net/http://w3schools.com/ Nancy O.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5058678#5058678
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5058678#5058678
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5058678#5058678. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Serial number doesn't match product
My coworker downloaded Adobe Acrobat XI Standard on our computers recently and now whenever I try to open up a PDF file a pop up screen appears with the heading "Serial Number Upgrade" asking me to chose a product and type in the serial number I have tried matching every single product option with my serial number and none of them work. The screen does say my serial number is correct but it doesn't match any of the products. I'm not sure what to do at this point...?
Ok, so what you are saying is we bought the upgraded Adobe Acrobat, but we would need to buy the previous version if we want the serial number to work?
King & Wood, P.A.
1701 Hermitage Blvd., Ste. 104
(850) 580-7711
(850) 205-4501 fax
Privileged & Confidential: This email is intended for the named recipient(s) only and may contain information that is proprietary, privileged, confidential, or otherwise legally exempt from disclosure. If you are not the named addressee, you are not authorized to read, print, retain, copy, or disseminate this message or any part of it. Nothing in this email is intended to constitute a waiver of any privilege or the confidentiality of this message. If you have received this email in error, please notify the sender immediately and delete this message. Circular 230 Disclosure:To ensure compliance with Treasury Department regulations, we advise you that, unless expressly indicated, any federal tax advice contained in this message or any attachments cannot be used for the purpose of avoiding penalties imposed by the Internal Revenue Code, or (ii) promoting, marketing, or recommending to another party any matters addressed herein -
Code Review on a Full Screen Graphics Wrapper
Hi all, if you could be so kind, could I get a quick review of my full screen graphics wrapper? It is giving strange flickering issues on an OSX TIBook, although that may be Apple's implementation. Also, am I breaking any major rules? Thanks, Ryan
package rpgClient.graphics;
import java.awt.*;
import java.awt.image.*;
public class Screen
private Frame mainFrame;
private GraphicsDevice gd;
private BufferStrategy bs;
private DisplayMode oldDisplayMode;
private DisplayMode newDisplayMode;
public Screen(GraphicsDevice gd, DisplayMode dm)
System.setProperty( "sun.java2d.translaccel" ,"true" );
this.gd = gd;
oldDisplayMode = gd.getDisplayMode();
newDisplayMode = dm;
GraphicsConfiguration gc = gd.getDefaultConfiguration();
mainFrame = new Frame(gc);
mainFrame.setUndecorated(true);
mainFrame.setIgnoreRepaint(true);
//screen specifications
public static GraphicsDevice[] getGrephicsDevices()
return GraphicsEnvironment.getLocalGraphicsEnvironment().getScreenDevices();
public static GraphicsDevice getDefaultGraphicsDevice()
return GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice();
public static DisplayMode createDisplayMode(int width, int height, int bitdepth)
return new DisplayMode(width, height, bitdepth, DisplayMode.REFRESH_RATE_UNKNOWN);
public static DisplayMode[] getDefaultDisplayModes()
return GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice().getDisplayModes();
public static DisplayMode[] getDisplayModes(GraphicsDevice gd)
return gd.getDisplayModes();
public static boolean isValidDisplayMode(GraphicsDevice gd, DisplayMode dm)
DisplayMode[] dms = getDisplayModes(gd);
for(int i = 0; i < dms.length; i++)
if(dms.getWidth() == dm.getWidth() &&
dms[i].getHeight() == dm.getHeight() &&
dms[i].getBitDepth() == dm.getBitDepth())
return true;
return false;
public static boolean isValidDefaultDisplayMode(DisplayMode dm)
return isValidDisplayMode(getDefaultGraphicsDevice(), dm);
//class methods
public boolean isFullScreenSupported()
return gd.isFullScreenSupported();
public boolean isDisplayChangeSupported()
return gd.isDisplayChangeSupported();
public void initFullscreen() throws Screen.FullScreenInitException
if(!isFullScreenSupported() || !isDisplayChangeSupported())
throw new Screen.FullScreenInitException();
//init the display
gd.setDisplayMode(newDisplayMode);
gd.setFullScreenWindow(mainFrame);
mainFrame.createBufferStrategy(3);
bs = mainFrame.getBufferStrategy();
public void deinitFullscreen()
gd.setFullScreenWindow(null);
gd.setDisplayMode(oldDisplayMode);
public Frame getBaseFrame()
return mainFrame;
public GraphicsConfiguration getCurrentGraphicsConfiguration()
return mainFrame.getGraphicsConfiguration();
public void dispose()
mainFrame.dispose();
mainFrame.removeNotify();
//Draw method one: Pass in an image of the screen
public void bltImage(Image i)
Graphics g = bs.getDrawGraphics();
g.setColor(Color.BLACK);
g.fillRect(0,0, newDisplayMode.getWidth(), newDisplayMode.getHeight());
g.drawImage(i, 0, 0, null);
g.dispose();
bs.show();
//Draw method two: Get the back buffer, do you buisness, then initiate the blt
public Graphics2D getGrahphics2D()
Graphics2D g = (Graphics2D)bs.getDrawGraphics();
g.setColor(Color.BLACK);
g.fillRect(0,0, newDisplayMode.getWidth(), newDisplayMode.getHeight());
return g;
public void bltGraphics2D(Graphics2D g)
bs.show();
g.dispose();
public class FullScreenInitException extends Exception {}Hi there,
Did you ever resolve this problem? I am new to the Fullscreen API but I am writing a complicated interactive screensaver. It works really well on Windows XP but there is terrible startup flicker on OS X. My own graphics is repeatedly overdrawn with a blank white screen, about four or five times over a few seconds, then finally the window starts behaving (nearly) as expected. The same drawing code works well in a windowed version on OS X.
Anyone else have this problem? -
Closing Stock Valuation doesn't matched physicallly
Hi SAP Gurus.,
Can you please assist me reg this issue"Closing Stock Valuation doesn't matched physicallly".
May I know the possible rectification ways to solve this problem.
Thanks in Advance,
Regards,
Balaji BhonslePhysical Inventory...
http://www.sap-img.com/materials/physical-inventory-process.htm -
I recently bought iphone 5 32gb white. Was surprise to see the outer box serial no doesn't match with iphone 5 system.
They have print XXXXXXTXXXX on box and on phone its XXXXXX7XXXXXX. Only one latter is mixprint though.
I check coverage status at apple site. The box serieal no is not found in apple system while the iphone 5 inside serial no i can see warrenty.
plz help is it normal to have serial no unmatched on phone and box or the phone is not genuineYou are correct. The SIM Tray of iPhone 5 does not have the Serial # printed on it. So your Serial # is the one in the Settings app About. This is your true Serial #. A 7 and a T from a box label are not distinct enough to matter. Apple will only honor the Settings About Serial # and the ones located inside the iPhone 5, which will be the same as the About Serial #.
-
Itunes will no longer accept any of my credit cards. It says vcode doesn't match when it does. Customer service is no help. I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.
Itunes will no longer accept any of my credit cards. It says vcode doesn't match when it does. Customer service is no help. I have re-inputted the info in the account section of the apple store and in itunes--still says vcode doesn't match.
-
Error: The decapsulated inner packet doesn't match the negotiated policy in the SA
I upgraded my ASA from 8.2(1) to 8.4(3) as I wanted to try to get Android devices to properly connect via VPN.
After some effort, I was able to get the Android devices to connect via VPN. However, my syslog server has a number of errors recorded that look this this:
%ASA-4-402116: IPSEC: Received an ESP packet (SPI= 0x1E76EFA6, sequence number= 0x1F0) from x.x.x.x (user= testuser) to y.y.y.y. The decapsulated inner packet doesn't match the negotiated policy in the SA. The packet specifies its destination as z.z.z.z, its source as a.a.a.a, and its protocol as tcp. The SA specifies its local proxy as y.y.y.y/255.255.255.255/udp/42246 and its remote_proxy as x.x.x.x/255.255.255.255/udp/0.
Digging further, it seems this error might be due to a NAT issues with the VPN connections. VPN previously worked with Cisco's VPN client on Windows, though I did not test to see if that is no longer working. However, I made no changes in the config, except for those related to additions needed to support L2TP. With the below config, Android clients can connect to the ASA and access the internal network, but they cannot connect to external addresses. I'm at a loss.
The addresses used in the config: 192.168.1.0/24 are on the internal LAN and 192.168.3.0/24 are addresses assigned to VPN clients.
I noted in the config this line:
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
The access list is not referenced anywhere, though it was referenced in the 8.2(1) config like this:
nat (inside) 0 access-list inside_nat0_outbound
I'm not sure what else changed, but I've looked over the config and I just cannot see what the issue might be. I'm hoping somebody might be able to point out my error.
Here's the config file (at least the parts that might be of interest):
: Saved
ASA Version 8.4(3)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa843-k8.bin
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
access-list outside_access_in extended permit icmp any interface outside time-exceeded
access-list outside_access_in extended permit icmp any interface outside echo-reply
access-list outside_access_in extended permit icmp any interface outside unreachable
access-list outside_mpc extended permit ip any interface outside
access-list inside_mpc extended permit ip 192.168.1.0 255.255.255.0 any
access-list testVPN_splitTunnelAcl extended permit ip 192.168.1.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
ip local pool VPN-Pool-1 192.168.3.1-192.168.3.254 mask 255.255.255.0
ip verify reverse-path interface outside
nat (inside,any) source static any any destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
object network obj-192.168.3.0
nat (outside,outside) dynamic interface
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy testVPN internal
group-policy testVPN attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value testVPN_splitTunnelAcl
default-domain value test.us
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
group-policy testVPNns internal
group-policy testVPNns attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
username testuser password PASSWORD encrypted privilege 15
username testuser2 password PASSWORD nt-encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group testVPN type remote-access
tunnel-group testVPN general-attributes
address-pool VPN-Pool-1
default-group-policy testVPN
tunnel-group testVPN ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNns type remote-access
tunnel-group testVPNns general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNns
tunnel-group testVPNns ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp type remote-access
tunnel-group testVPNnsl2tp general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group testVPNnsl2tp ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp ppp-attributes
authentication ms-chap-v2
One last question: in order to get the connection from Android to work, I was forced to use "tunnel-group DefaultRAGroup". Is that actually a limitation, or did I make an error that forced that requirement? I wanted to use "tunnel-group testVPNnsl2tp".
Thanks!Chris,
This is still a bit off the mark. I think I might be confusing the issue by including some of the VPN configuration that I had previously installed and working (e.g., two other VPN tunnel groups with split tunneling on one of them). Let's just remove that stuff from consideration. I actually tested the current configs just to see if they are working since the upgrade. testVPN is working with the split tunneling, but testVPNns (no-split tunneling) does not allow external access. I guess there is a NAT config issue there, too, but not sure what it is, yet. I've not investigated that closely.
I want to solve one problem at a time, though I understand there are some interdependencies.
What I'd like to focus on right now is just the L2TP VPN connection.
From what I've been able to understand from the documentation, what I need are these lines:
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key P74bmqL6rT40bl5
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
I still want to assign the IP addresses to VPN clients out of 192.168.3.0/24.
The tricky part is understanding exactly what NAT rules to insert and to avoid that error message I'm getting relatred to the encapsulated packets. I tried to introduce the commands you had, but it's missing stuff that I would need for L2TP/IPSec (e.g., "mode transport"). I also don't think I want "pfs group5". The above config "works" in that I get connected -- all negotiation is done. It's just that packets from the VPN client are not able to go out to the Internet and I'm seeing that encapsulation error messages when I try to send a packet.
Paul -
Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion? My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB" and mine starts with a "W." Purchased direct from Apple August 2007.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Open System Profiler and report what you find displayed for the Model Identifier. -
Image in Lightroom doesn't match exported image viewed in Photoshop
After all my hard work in Lightroom, I export the image to a folder on my hard drive. When I open this exported image in Photoshop and view it alongside the Lightroom version of its "twin" in Lightroom, there is a significant difference. Why is this? I want to use these images in my books, but my time is wasted if I end up with anything other than what I created in Lightroom. Shouldn't these images match exactly?
Thanks Jao and Michael...the color management idea makes a lot of sense.
Adding to this idea, when I open the Pshop file I get a message about the doc having an embedded profile that doesn't match current RGB working space, and the usual 3 options: Use the embedded profile, Convert color to the working space, or discard embedded profile. No matter which option I choose, none of the opened docs match the Lightroom version.
The color balance is fine, but the colors aren't as vibrant. The Pshop photo is dull and lifeless compared to the Lightroom version. I used Clarity which added subtle brightness, and Vibrance to crank up the color in LR which added wonderful dimensionality and punch to the landscape scene, but the Pshop version has dulled these back down. -
I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for password)
Your email password.
iPhoto '11: Email your photos
Open Mac Mail. From the Mac Mail menu bar click Mail > Preferences then select the General tab.
Make a selection from the: Default email reader pop up menu. -
I have been buying apps for a long time without a problem using my credit card on file. All of a sudden itunes is not recognizing my card which is in good standing. All the info is correct but itunes/apple says it doesn't match the bank info. Any ideas?
Answered in your Other post on this Topic...
https://discussions.apple.com/message/24053626#24053626
Maybe you are looking for
-
I have a scenario where I'm collecting Debmas from R3 and I want to convert it to a text file. I'm unable to transform the multiple Debmas to a single xml structure with multiple debmas. The BPM collects the IDOCs correctly but during the transformat
-
How to consider 'Stock in quality inspection' in SNP
Hello, In my SNP Planning Area there is a Key Figure (Quantity Available) to display the stocks (CC- Stock; CE- SubConStk; CK- RstrUseStk). The business want me to add the QM stocks (Stock in quality inspection) in the SNP run so I added the category
-
Firefox is continuously "connecting" while I am on the web. It does not matter what site I am on but it keeps connecting (wheel spinning) every 10 seconds or so. Like it is reloading the page. The page does not go away, but it is driving me crazy as
-
Restoring from iCloud backup - what happens to non-iTunes music?
iPhone4, iOS5 and want to restore from an iCloud backup. Wondering what happens when music not purchased on iTunes (95% of my collection), when I restore from that backup? I'm thinking it will all be gone and I will have to go through the painful p
-
Removing .html extension when using MUSE
After creating my website with MUSE, I uploaded to the Adobe Business Catalyst (BC), but couldn't remove the .html extension. However, if you create a page using just BC, the extension will automatically be gone by default. Once you've uploaded your