Final Service Entry Indiacator in Service Entry Sheet

Hi
Is there any way in config by which we can remove the Final Service Entry indicator in the Service Entry Sheet.
Regards
--Vikas

Hi,
For Example the GR is done on April month & can cellation is on March month.
Again GR on MArch month & MIRO.
Now the total GR shown in March is 1 & cancellation is 1
in April month One GR will shown.
Now do onething Make the cancellation of GR-Reversal by doing (101 movement type GR) which is done on march, so that the total 2 GR & 1 cancellation,so only one GR will shown in March.
Now again do the reversal of GR which is done in March so that it get tally.
Regards,
Raj.

Similar Messages

Service Work Order & Service Entry - quantities for services

Hi,
I have a work order, the item category for item 10 is set as "Service". A service is inserted in the "Services" tab of item 10 with quantity 100 EA. Service entries were entered.
But when display the details of the service (either in ME23N or ML81N), the "Actual Quantity" in "Statistic" tab does not tally with my actual total quantity entered.
For example, the Actual Quantity may display 100 EA. But the total quantity of all the service entries may only be 90.
Did I missed out anything? Can anyone enlighten me?
thanks.

Hi Kishore,
thanks for your reply.
I have added quantities added for all my service entry sheets. The total does not tally with Actual Quantity field.
In other words, my total quantities for all the service entry sheets is 90 EA. But the Actual Quantity field is showing 100 EA.
I have used t-code MSRV6 to display the list of service entries for the service. It is showing me all the service entry sheet for the WO/PO. The total quantity is 90 EA, but Actual Quantity field is showing 100 EA.

Entries appearing in Service Tax Control Account due to Error in System

Hello Experts,
     I am facing a problem in one particular GL i.e.Service Tax Control a/c
error-Entries appearing in Service Tax Control Account due to Error in System
entries are- Service tax control   a/c   -
Dr. 21,621.86
                        To Service Tax Control a/c     Cr.      21,621.86
My question is when i am making entry as Service tax Dr-21,621.86,Service Tax Cr.21,621.86,so it will adjust,and in FBL3N amt will show 0 but it was showing 21,621.86
Plz Guide me asap,very urgent issue
Thanks in Advance

Dear,
What was the balance before you posted the below entry?
Also run FBl3N with correct date parameters..
br,Vivek

Post Invoice for Service Entry with many Service line item-MM-LIV

Dear All,
I have a problem to post Invoice for Service Entry with many Service line item. The problem is as follow:
I have created 1 Service Entry which has 5 Service line item in it. Three of the service line item are subject to Value Added Tax (VAT), the others aren't. Then, i wanted to post Invoice for the Service Entry, however, it just display 1 item which amount in total. How can i segregate each service line item in Service Entry thus i can post Invoice for all Service line item with subject to VAT and all service item with not subject to VAT, if just 1 Service Entry created for it ?
Please help me.
Thank You

Hi Ganda,
If you mark the 'service based invoice verification' checkbox in your PO item, your service items will be in your invoice as seperate invoice lines. Then you can modify the taxcodes on service item level.
Kind regards, Dick Hendriks.

Wrong entry be deleted in PI Sheet

Hi all,
How can wrong entry be deleted in PI Sheet?

hi
I do not think it is possible as PI sheet monitored through Phases/signatures..
Probably, you need to comment in subsequent phases about mistake occured for documentation purpose.
Thanks
JK

Changing Service Masters in to Service Materials (DIEN) any complications,

Hello SAP Gurus,
We are dealing with a Construction Based Client and along with Materials we also mainly require services,
We right now have created Service Masters for catering our Service requirements, doing service entry sheets,
But the major Issue with going by Service Masters is this Service masters could not be included them in BOM and we could not run MRP for there requirements,
Basically for completing any Construction activity we require Material and also services to be performed but the service masters could not be included in MRP, also the delivery cost cannot be handled going by Service masters,
so we are planning to convert our Service Masters in to Service Materials to accomplish this requirements. any issues going by the same, and any precautions to be followed please suggest. have any one run there service requirements by using Service Materials instead of Service Masters / service activity please throw some light.
Awaiting your suggestions
Thanks and regards
Kumar

Hi,
Thanks for your reply,
The BADI and the info you have explained details about activating Services for Subcontracting Procedure, where in it requires to maintain Material Masters as required for managing and running Subcontracting process,
But our company have already created 1000s of Service masters for managing there Service Activities ( only problem being cannot run MRP for Service masters and Specify Delivery cost for Service POs)
now as to get MRP we should make a huge shift from Service Masters to Subcontracting Materials with BOM Values and should be well planned. i will definitely try to work on it and see how it goes.
but also is there any way to use the existing Service Masters for running MRP, or including in BOM, or any how to Plan services,
Thanks and Regards,
Kumar

The Secure Store Service application Secure Store Service Proxy is not accessible

I am working on setting up a new SharePoint 2013 Farm for our external web site which is currently running on 2010 SharePoint. Because this is an External Website for our organization we have an internally available Publishing Site and there is an Web App
Extension to provide Anon Access to users using the www address. Currently I am doing everything on a single server for testing with HOSTS entries to loop back so I can test with real host headers and not impact the 2010 prod environment. We will be setting
up 2 more WFEs with a NLB before moving this into prod but it isn't there yet. We brought the Site Collection Databases over but are still running in 2010 mode for now.
I migrated a copy of the Secure Store Database over from 2010 and had it put on the 2013 Farm's Database Server. Set up Secure Store and the Secure Store Proxy. I went into the Secure Store Proxy in CA and refreshed the Key with the proper Pass Phrase. After
doing that I could see the Target Application IDs listed. Everything was looking good so I went off to test. If I am on the publishing site I can go to a page that has the solution on it and it operates as expected. It does a query to a non SharePoint database
and returns information filtered based on the search parameters. The only odd thing I see is if I click on the "Site Actions" I get a message "An error has occurred with the data fetch. Please refresh page and retry." Need to look into
that more but it only happens on pages that have these solutions. Maybe a clue. If I go to the Anonymous Access page (www......) and try and use the solution, it immediately (way too quick to appear like it is doing anything) comes back with "The security
token request cannot be completed."
If I dig through the usage logs I am finding the following.
The Secure Store Service application Secure Store Service Proxy is not accessible. The full exception text is: The security token request cannot be completed.
Unexpected exception from endpoint address : https://[Servername]:32844/4e87fd3aabb640fb8cc3ed52188cf5c0/SecureStoreService.svc/https
Logging unknown/unexpected client side exception: InvalidOperationException. This will cause this application server to be removed from the load balancer queue. Exception: System.InvalidOperationException: The security token request cannot be completed.
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri) at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress
address, Uri via) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.GetChannel(Uri address) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName,
Boolean validateCanary, ExecuteDelegate`1 operation).
Initially I was fighting a firewall issue because it wasn't working (different errors) on both sides. Had Network Engineers open firewall ports needed and now it works on the publishing side. Still the same error on the Anon side. I suspect I have missed
something when it comes to configuring the Secure Store to allow access to anonymous connections.
Let me know if you need any more information but that should paint a pretty good picture as to how things are set up.
Thanks for any help on this one. Searches haven't found much that has helped so far.

Hi Sennister,
I recommend to verify the things below:
Did this issue occur with all the pages in the anonymous side?
Check if the Claims to Windows Token Service is started.
Change the <identity impersonate="true" /> in the web.config to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Data Services wizard not creating service

I am having huge problems with the Data Services wizard.
I am using Flash Builder 4.6 on a Mac (10.7.2).
Over the last year I have been working on a couple of proof of concept projects and now want to start work on a production version starting from scratch in a new project.
The Data Services wizard has worked fine for me in the past, but now I am having serious problems.
The first problem is the Data/Services window does not update when I create a new service with the wizard. (I am connecting to the Zenfolio Web Service.) If have to close the project and open it before I see the new service in the Data/Services window.
While this problem is more an inconvenience, more seriously the wizard does not create either the "services" folder or the "valueObjects" folder as it did in the past.
Now if I right click on a method in the service and select "Create Service Call", it creates the Call Responder but not the call itself.
The relevant log entry starts with
!ENTRY com.adobe.flexbuilder.dcrad 4 1 2012-01-12 22:39:20.962
!MESSAGE Component type services.zfapi.Zfapi not found.
If I create a "services" folder and copy the zfapi package from one of my previous projects, all works fine.
This probably gives me a workaround - although I haven't tested this to any extent yet.
It is very strange and worrying behaviour though.
regards
Chris

OK, here are the log entries created when I try to create the service:
!ENTRY com.adobe.flexbuilder.dcrad 4 1 2012-01-19 22:16:33.970
!MESSAGE
!STACK 0
java.lang.reflect.InvocationTargetException
          at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:479)
          at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:372)
          at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:507)
          at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.addServices(ServicesManager.jav a:476)
          at com.adobe.flexbuilder.dcrad.views.ServiceExplorerView$1.handleEvent(ServiceExplorerView.j ava:536)
          at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
          at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
          at org.eclipse.swt.widgets.Widget.sendSelectionEvent(Widget.java:1530)
          at org.eclipse.swt.widgets.Link.textView_clickOnLink_atIndex(Link.java:117)
          at org.eclipse.swt.widgets.Display.windowProc(Display.java:5781)
          at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
          at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220)
          at org.eclipse.swt.widgets.Widget.mouseDownSuper(Widget.java:1092)
          at org.eclipse.swt.widgets.Widget.mouseDown(Widget.java:1084)
          at org.eclipse.swt.widgets.Control.mouseDown(Control.java:2519)
          at org.eclipse.swt.widgets.Display.windowProc(Display.java:5471)
          at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
          at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220)
          at org.eclipse.swt.widgets.Widget.windowSendEvent(Widget.java:2092)
          at org.eclipse.swt.widgets.Shell.windowSendEvent(Shell.java:2252)
          at org.eclipse.swt.widgets.Display.windowProc(Display.java:5535)
          at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
          at org.eclipse.swt.widgets.Display.applicationSendEvent(Display.java:4989)
          at org.eclipse.swt.widgets.Display.applicationProc(Display.java:5138)
          at org.eclipse.swt.internal.cocoa.OS.objc_msgSend(Native Method)
          at org.eclipse.swt.internal.cocoa.NSApplication.sendEvent(NSApplication.java:128)
          at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3610)
          at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
          at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
          at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
          at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
          at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
          at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
          at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
          at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
          at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
          at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
          at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
          at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
          at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:597)
          at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
          at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
          at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
Caused by: java.lang.NoClassDefFoundError: org/apache/log4j/Priority
          at freemarker.log.Log4JLoggerFactory.getLogger(Log4JLoggerFactory.java:65)
          at freemarker.log.Logger.getLogger(Logger.java:255)
          at freemarker.template.utility.SecurityUtilities.<clinit>(SecurityUtilities.java:67)
          at freemarker.ext.beans.BeansWrapper.<clinit>(BeansWrapper.java:147)
          at freemarker.template.ObjectWrapper.<clinit>(ObjectWrapper.java:69)
          at freemarker.core.Configurable.<init>(Configurable.java:132)
          at freemarker.template.Configuration.<init>(Configuration.java:109)
          at freemarker.template.Configuration.<clinit>(Configuration.java:96)
          at fiber.gen.freemarker.FreemarkerModelGenerator.buildFreemarkerConfiguration(FreemarkerMode lGenerator.java:328)
          at fiber.gen.freemarker.FreemarkerModelGenerator.<init>(FreemarkerModelGenerator.java:85)
          at fiber.gen.freemarker.FreemarkerStructuredTypeGenerator.<init>(FreemarkerStructuredTypeGen erator.java:62)
          at fiber.gen.as.ASClassGenerator.<init>(ASClassGenerator.java:84)
          at fiber.gen.as.vo.SuperGenerator.<init>(SuperGenerator.java:53)
          at fiber.gen.as.vo.ASValueObjectGenerator$2.<init>(ASValueObjectGenerator.java:225)
          at fiber.gen.as.vo.ASValueObjectGenerator.getBaseClassGenerator(ASValueObjectGenerator.java: 222)
          at fiber.gen.as.vo.ASValueObjectGenerator.getTemplateNames(ASValueObjectGenerator.java:392)
          at fiber.gen.as.ASGenerator.getTemplateNames(ASGenerator.java:465)
          at com.adobe.model.core.generators.wrapper.CodeGenerationUtils.getTemplateResources(Unknown Source)
          at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.getTemplateResourcesForGene rator(Unknown Source)
          at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.generateCodeForGenerator(Un known Source)
          at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.internalGenerateAllCodeForM odel(Unknown Source)
          at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper$2.run(Unknown Source)
          at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.generateAllCodeForModel(Unk nown Source)
          at com.adobe.flexbuilder.dcrad.core.generation.ASVOGenerator.generate(ASVOGenerator.java:78)
          at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.generateVO(ServicesManager.java :538)
          at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.add(ServicesManager.java:403)
          at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.access$11(ServicesManager.java: 356)
          at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager$1.run(ServicesManager.java:484)
          at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:464)
          ... 48 more
Caused by: java.lang.ClassNotFoundException: org.apache.log4j.Priority
          at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:513)
          at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:429)
          at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:417)
          at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:107)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
          ... 77 more
Root exception:
java.lang.NoClassDefFoundError: org/apache/log4j/Priority
          at freemarker.log.Log4JLoggerFactory.getLogger(Log4JLoggerFactory.java:65)
          at freemarker.log.Logger.getLogger(Logger.java:255)
          at freemarker.template.utility.SecurityUtilities.<clinit>(SecurityUtilities.java:67)
          at freemarker.ext.beans.BeansWrapper.<clinit>(BeansWrapper.java:147)
          at freemarker.template.ObjectWrapper.<clinit>(ObjectWrapper.java:69)
          at freemarker.core.Configurable.<init>(Configurable.java:132)
          at freemarker.template.Configuration.<init>(Configuration.java:109)
          at freemarker.template.Configuration.<clinit>(Configuration.java:96)
          at fiber.gen.freemarker.FreemarkerModelGenerator.buildFreemarkerConfiguration(FreemarkerMode lGenerator.java:328)
          at fiber.gen.freemarker.FreemarkerModelGenerator.<init>(FreemarkerModelGenerator.java:85)
          at fiber.gen.freemarker.FreemarkerStructuredTypeGenerator.<init>(FreemarkerStructuredTypeGen erator.java:62)
          at fiber.gen.as.ASClassGenerator.<init>(ASClassGenerator.java:84)
          at fiber.gen.as.vo.SuperGenerator.<init>(SuperGenerator.java:53)
          at fiber.gen.as.vo.ASValueObjectGenerator$2.<init>(ASValueObjectGenerator.java:225)
          at fiber.gen.as.vo.ASValueObjectGenerator.getBaseClassGenerator(ASValueObjectGenerator.java: 222)
          at fiber.gen.as.vo.ASValueObjectGenerator.getTemplateNames(ASValueObjectGenerator.java:392)
          at fiber.gen.as.ASGenerator.getTemplateNames(ASGenerator.java:465)
          at com.adobe.model.core.generators.wrapper.CodeGenerationUtils.getTemplateResources(Unknown Source)
          at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.getTemplateResourcesForGene rator(Unknown Source)
          at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.generateCodeForGenerator(Un known Source)
          at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.internalGenerateAllCodeForM odel(Unknown Source)
          at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper$2.run(Unknown Source)
          at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.generateAllCodeForModel(Unk nown Source)
          at com.adobe.flexbuilder.dcrad.core.generation.ASVOGenerator.generate(ASVOGenerator.java:78)
          at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.generateVO(ServicesManager.java :538)
          at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.add(ServicesManager.java:403)
          at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.access$11(ServicesManager.java: 356)
          at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager$1.run(ServicesManager.java:484)
          at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:464)
          at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:372)
          at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:507)
          at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.addServices(ServicesManager.jav a:476)
          at com.adobe.flexbuilder.dcrad.views.ServiceExplorerView$1.handleEvent(ServiceExplorerView.j ava:536)
          at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
          at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
          at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
          at org.eclipse.swt.widgets.Widget.sendSelectionEvent(Widget.java:1530)
          at org.eclipse.swt.widgets.Link.textView_clickOnLink_atIndex(Link.java:117)
          at org.eclipse.swt.widgets.Display.windowProc(Display.java:5781)
          at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
          at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220)
          at org.eclipse.swt.widgets.Widget.mouseDownSuper(Widget.java:1092)
          at org.eclipse.swt.widgets.Widget.mouseDown(Widget.java:1084)
          at org.eclipse.swt.widgets.Control.mouseDown(Control.java:2519)
          at org.eclipse.swt.widgets.Display.windowProc(Display.java:5471)
          at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
          at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220)
          at org.eclipse.swt.widgets.Widget.windowSendEvent(Widget.java:2092)
          at org.eclipse.swt.widgets.Shell.windowSendEvent(Shell.java:2252)
          at org.eclipse.swt.widgets.Display.windowProc(Display.java:5535)
          at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
          at org.eclipse.swt.widgets.Display.applicationSendEvent(Display.java:4989)
          at org.eclipse.swt.widgets.Display.applicationProc(Display.java:5138)
          at org.eclipse.swt.internal.cocoa.OS.objc_msgSend(Native Method)
          at org.eclipse.swt.internal.cocoa.NSApplication.sendEvent(NSApplication.java:128)
          at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3610)
          at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
          at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
          at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
          at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
          at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
          at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
          at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
          at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
          at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
          at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
          at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
          at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
          at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:597)
          at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
          at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
          at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
Caused by: java.lang.ClassNotFoundException: org.apache.log4j.Priority
          at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:513)
          at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:429)
          at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:417)
          at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:107)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
          ... 77 more

Service created with New-Service does not start

Hello,
I am trying to create a working service using the New-Service cmdlet. I tried a bunch of different examples, I found on the internet like this one from technet:
new-service -name TestService -binaryPathName "C:\WINDOWS\System32\svchost.exe -k netsvcs" -dependson NetLogon -displayName "Test Service" -StartupType Manual -Description "This is a test service."
The service gets created and is listed in services.msc and Get-Service but I cannot start it. Ever. The state changes to "Starting" but that's all.
I tried it on different machines with different Windows- and PowerShell versions using elevated PS-consoles.
Thanks,
Manuel

Hi Manuel,
I tested on my client, and I also keep getting the error 1053, which indicates timeout and the new created service can not be started during the limit time, so you can try to change the service time limit, please note this needs to change registry value,
Using Registry Editor incorrectly can cause serious problems:
In Registry Editor, locate, and then right-click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
a.Point to New, and then click DWORD Value. In the right pane of Registry Editor, notice that New Value #1 (the name of a new registry entry) is selected for editing.
b.Type ServicesPipeTimeout to replace New Value #1, and then press ENTER.
c.Right-click the ServicesPipeTimeout registry entry that you created in step c, and then click Modify. The Edit DWORD Value dialog box appears.
d.In the Value data text box, type TimeoutPeriod, and then click OK
Refer to:
Error 1053: The service did not respond to the
start or control request in a timely fashion - When trying to start the server service.
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

Diference between Service tax and GTA service tax

Hi,
Kindly tell me what is the difference between service tax and GTA service tax and their accounting entries in SAP ?
With Regards,
Samrat

Hi,
Service Tax is charged by the service vendor and you pay the service tax to the vendor along with his payment. Once you pay the service tax, it is the liability of the vendor to pay the service tax amount collected from you to the Government.
GTA is Goods Transport Authority. When you receive any service from any transport vendor, he will not charge service tax from you though it attracts service tax. It is your liability to pay the service tax to Government for the services received from the transport vendor.
In case of normal service tax it is treated as input tax and credit for the same is taken (similar to excise). But, in case of GTA you have to create the liability at the time of receiving the service and make the payment directly to the Government.
Regards
Ramakrishna

I cancelled my service, was charged for service which was not provided, and I am unable to find a way to dispute or to pay my bill.

To begin, what ADA-compliant options are available to work with a service representative? I've never found the online chat service support to be available during my waking hours after checking over the last week. I can't find a contact email for support, either. I've been instructed on several occasions that I will need to make a voice call for customer service, but unfortunately, this will not be possible. I will require text-format assistance from customer support to address two issues which I am unable to solve on my own:
1) I was charged for service following the cancellation of my service; this includes a period following cancellation during which no service was provided. After working with a representative in person, I was told that my final bill would be adjusted to reflect the legally billable amount. This was three weeks ago and I haven't received a response, and I haven't been able to find a way to pursue a resolution - What can I do to help move this process forward?
2) It appears I will be unable to pay my bill after this dispute has been reviewed. My phone number is no longer with Verizon. The online bill payment login requires a phone number - I have never been provided with any other account number. Unfortunately, Verizon appears to close access to online bill payment when the phone number is transferred, even to accounts with unpaid invoice amounts. How can I pay my bill online?

kananga wrote:
To begin, what ADA-compliant options are available to work with a service representative? Good question, and one that I don't know the answer to. Does anything on this page help? Products & Services Overview | Verizon Wireless
1) I was charged for service following the cancellation of my service; this includes a period following cancellation during which no service was provided. Service is normally billed through the end of the billing cycle, whether service is provided or not. "Cancellations will become effective on the last day of that month’s billing cycle, and you are responsible for all charges incurred until then." After working with a representative in person, I was told that my final bill would be adjusted to reflect the legally billable amount. According to their legal docs, the "leagally billable amount" is through the end of the billing cycle. This was three weeks ago and I haven't received a response, and I haven't been able to find a way to pursue a resolution - What can I do to help move this process forward?
2) It appears I will be unable to pay my bill after this dispute has been reviewed. My phone number is no longer with Verizon. The online bill payment login requires a phone number - I have never been provided with any other account number. Unfortunately, Verizon appears to close access to online bill payment when the phone number is transferred, even to accounts with unpaid invoice amounts. How can I pay my bill online? You cannot pay online once the account is cancelled. You will be mailed a paper copy of the final bill, and you can mail a check, or possibly call in and pay over the phone. But online is no longer an option once the account is cancelled.

How to convert an Application Service into a Web Service

Hi,
I am working on SAP Netweaver CE 7.1. I have created an Application Service which returns an output as a List with each elemnt of the list conatining some attributes and a List.
now I want to convert this AS into a Web Service. how I can do that as teh Developer Studio doesn't allow me to select the method which returns the List.
Also how should I deploy the Web Service and test the same.
Please reply ASAP.
Manish

To convert your Application Service into a Web Service ,
1) go to General Tab of your Application Service
2) check the option Remote Enabled Service , Save Metadata
3) Right click Application Service and select WebService New , give name for your Webservice and select Default Configuration type : Simple SOAP or select Basic Auth SOAP if u want your webservice to be password protected , just click next and finally finish
4) Genearte your project code , build and deploy your application
5) Then goto webService navigator to test your Web service
Hope this helps
Thanks
Asif

Web Service vs. Enterprise Service

Hi all,
what is the difference between this two things. I have built a web service on my own. But what is an enterprise service?
And what is the difference between the UDDI for web services and the ESR??
regards

God, these answers are killing SOA concepts
Registry is a UDDI based framework to hold a service specification if the services are build using web service technology.
A UDDI entity just represent the metadata of a service, it do not matter whether it is a specific type of services.
Even SAP support Systinet Enterprise registry, so you guys are telling me that Systinet only support enterprise service???.
Service is cataloged based on the service Taxonomy
Service taxonomy are in two type
1. Horizontal
2. Vertical
In horizontal taxonomy we categorize services as
1. Infrastructure services
2. Application Services
Infrastructure services are further divided into
1.     Utility services
2.     Communication Services
Application Services are further divided into
1.     Entity Services
2.     Activity Services
3.     Capability Services
4.     Process Services
A process service is composed of any of the other services in service taxonomy
In Vertical Taxonomy of services
We divide a business or organizations major business process as followed
1.     Major processes
a.     Such as Product manufacturing
b.     Supply Chain
2.     Supporting Processes
a.     HR
b.     Banking
3.     Integration Process
a.     Business Services (in technical term BPM, BPEL)
A business requirement such as
1. Order to Cash
Order Fulfillment etc are composed of business actions from major and supporting business process of an organization. It is connected using integration process in vertical taxonomy.
Integration Process do have nodes which can have same semantics as process service in horizontal taxonomy, this connect both taxonomy
If a service is based on vertical taxonomy and composed of horizontal services then it is called an enterprise service, cuz it address an enterprise wide concern
If a service is just for a supporting purpose and it is just based on any horizontal services it is not an enterprise service.
Finally what is service?
It is an entity which is designed based on SOA principles and have re-usability as the fundamental nature
What is web service?
It is just a technology used to implement services
Hope this answer clear
Finally, please do not try to learn SOA from just a tool perspective or a technology perspective
Thanks

To generate a report that will have services(exchange, AD, file services etc) status and interruptions in a day(SCOM 2012)

We have SCOM 2012 with Lync, exchange, fileserver and AD managment packs installed. The requirement is to generate a report that will have health status of these services and its failures in one sheet. Is it possible to generate such a report in SCOM?
if so, how to do it? please assist.

Yes, you can create custom report for availability of these services.
http://blogs.technet.com/b/emreguclu/archive/2011/10/13/using-linked-reports-in-scom-to-create-custom-availability-reports-for-specified-monitors.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Hide Service in Manager Self-Service

Good Night.
I am implementing MSS with BP 1.41 and ECC 604.
I need hide the following Services Approve Time Sheet Data; and Organizational Chart.
I want Know What is name of this services in the table of V_T7XSSSERSRV.??
And want know if Employee Working Times and Organization are subarea or area , How can hide this?
[Hide Services MSS|http://www.freeimagehosting.net/uploads/34071239b0.jpg]
Regards

Good Morning Vijay.
I don't found the subareas:
Employee Working Times and Organization .
I could not find the services for hide it:
Approve Time Sheet Data; and Organizational Chart.
Please can says the name of this subareas and service for do the configuration and hide this service, please.
Regards

Final Service Entry Indiacator in Service Entry Sheet

Similar Messages

Maybe you are looking for