Final Settlement for Extended Rebate - agreement status not updated

Hi,
When doing final settlement via the Extended rebate, a CM is generated, but the status of the agreement is not updated to D.  Any configurations needed or steps to be done? I thought it should be automatically updated by the system..
Thanks,

Hello
Refer following links with SAP Note for reference/understanding:
- The sales volume for Rebate agreement  is not current
- Sales volume not current in Rebates
- 456458 - FAQ: How does SDBONT06 work
Thanks & Regards
JP

Similar Messages

  • Cannot perform final settlement of a rebate agreement

    Dear experts,
    When I try to perform final settlement of a rebate agreement, error "Final settlement is not possible. (There are still open documents)" encountered.
    Is it due to there are some open billing documents related to the payer of the agreement?
    If yes:
    I have checked there is a billing document (cancel of credit memo) not yet released to account, which created half a year before.
    And it is not possible to open the financial period back to half year ago.
    Is there any way to delete this billing document?
    Thanks.

    Hi
    So as the system is giving error , just run VBOX  to update the old documents
    As you said that there are open documents then just either reverse those documents and then do final settlement or just forward it to FI those open documents
    Another option is go to VBO2 and maintain manually the agreement status as B and save the rebate agreement then the credit memo for final settlement will be released
    Regards
    Srinath

  • Sales volum for extended rebate agreement

    HI All,
    i made an extended rebate agreement and asales order accordein to this agreement, dleivery and billing then i returned back to the agreement to make settlement but i found this massage (( The sales volume for agreement 131 is not current)) i runed the report SDBONT06 but the massage still present so can u help me pls.

    Hello
    Refer following links with SAP Note for reference/understanding:
    - The sales volume for Rebate agreement  is not current
    - Sales volume not current in Rebates
    - 456458 - FAQ: How does SDBONT06 work
    Thanks & Regards
    JP

  • Settling of rebate agreement : Accrual not reversed

    Hi experts,
    I've quite a strange problem when i make a final settlement of a rebate agreement :
    The accrual are not reversed but are counted twice.
    I.e. I've an accrual of 100u20AC for a rebate agreement, when i settle it, it didn't go to 0 but to 200u20AC.
    When I make a partial settlement, the accrual is well reversed.
    The document types are the same for partial and final settlement.
    VKOA is correct and all FI document are posted correctly.
    Has someone an idea?
    Thanx
    Nicolas

    Hi nicholas
    If  answer has been given or your problem is solved ,kindly close the thread but if it is not solved dont close the thread , but if you have any new problem post it differently
    Regards
    Srinath

  • Extended Rebate Agreements

    HI All Gurus,
    We are using the SAP ECC 5.0 Version.
    My Client Requires certain features which can be handled through Extended rebate agreements.
    As per the documentation.
    Can Anyone help in how to activate the Extended Rebate Agreements.
    Thanks in Advance
    Sachin Dhiman

    Thanks a lot Alex,
    I have done the same.
    And now the extended Rebate Agreement link is available.
    Can you send me some document that gives me the steps for configuring the same.
    Here my client Requires Rebate agreements to be setteled retrospectively and the COPA to be updated at SKU Level i.e. Material level.
    As far as I have read about extended rebate agreement,
    this kind of requirement can be handled using variable key.
    If you have further input on this, kindly let me know.
    Anyways Thanks a lot for this help.
    regards
    Sachin Dhiman

  • How to Activate Extended Rebate Agreements

    HI All Gurus,
    We are using the SAP ECC 5.0 Version.
    My Client Requires certain features which can be handled through Extended rebate agreements.
    As per the documentation.
    Can Anyone help in how to activate the Extended Rebate Agreements.
    Thanks in Advance
    Sachin Dhiman

    Hi sachin
    1. change the time frame in tcode VBO1
    2.. Update doc is VBOF
    3. IF doing retro billing go to VFRB

  • Accruals not updated for Changed Rebate agreement when VBOF  performed.

    Hi Pals,
    Need your assistance in solving an incident  . our client has changed the  valid to date  of the  rebate agreement on 29.04.2014  in VBO2  from 28.02.1014 to 31.12.2014, later it was observed that  the rebate accruals for the blling documents generated after 28.02.104 to till date were not updated even after running the report VBOF. There are 15000 invoices after 29.04.2014 , hence it is difficult to check which invoices carries my rebate condition type.
    hence pls advice on
    1. how to find out the invoices for the changed agreement .
    2. How to update the accruals for the invoices that were created after  28.02.2014 to till date.
    An early reply would be highly appreciated.
    Br
    Krishna.K

    Dear krishna
    i tried your scenario--so after changing the validity for my Material rebate agreement type--i ran VBOF(SDBONT06)--so system has shown the updated billing doc with rebate which was not having any rebate condition earlier.
    Have you tried by retrieving all the billing docs created after service render date of 28th Feb14.
    Please take all the billing docs created after this date from VBRK table and you check some random billings docs whether rebate condition type is active with condition record or not.
    (other wise you try with by executing condition record numbers in KONV(doc condition number--then followed by VBRK)
    pl update us..
    Phanikumar

  • The sales volume for Rebate agreement  is not current

    Hi All
    I am getting an Error in Rebate VBO2- Sales volume is not current
    I am working in ECC6.0 & my agreement type customer rebate.
    Have maintained records in VBO1 & in billing -condition tab the correct % get populated. But the same is not displaying in VBO2.
    As per sap note in OMO1 i have updated S136 to synchronous updating 1. Also i execute program SDBONT06. In VBOX also i tried to update various parameters.
    Customer statics maintained-1
    G/L's maintained correctly.
    But still i am facing the same error in VBO2, 'sales volume for Rebate is not current'.
    Please anybody can help me on this.

    Hi deepa
    Run VBOX and check the box update billing documents and give the sales area and then execute and save it and if possible try to give the billing documents if you have any idea or else just generate.After generation again open the rebate agreement VBO2. so that the data gets updated by that time
    Go to OMO1 and  check wheather the infostructure S060 is in Asynchronous updating 1 or  Asynchronous updating 2 or No updation. If it is No updation then update the infostructure
    Regards
    Srinath

  • Need bapi or FM for changing rebate agreement stats in MEB3

    Hi All,
    I s there any Bapi's or Function modules which are used to change status in MEB3 field Agreement Status from open to " Settlement is being checked for release"
    Thanks in Advance.
    Venkat

    Hi Venkat,
    Try using FM SD_BONUS_STATUS_SET.
    Regards,
    Babul.

  • Status for the transferred Suppliers is not updated in ROS client!

    Hi all,
       We are running on SRM 5.0(Sp6).After i transfer the propects from ROS to EBP and when i convert them to VENDOR in EBP,then the status of the suppliers become "RELEASED" in EBP but the status is not updated in ROS client.
    What is to be done so that once the prospect is saved as a VENDOR in EBP,its status should be updated /set as RELEASED in ROS client too?
      Any help is appreciated...Points will be rewarded.
    BR,
    Disha.

    Deepti / Ramakrishna,
    As per Rama's comments, the BP status is released only when we use SUS and the information is passed via XI. However in our case we have ROS (without SUS) and EBP in same client. In this scenario XI is not required to transfer the Business partner status as per OSS note 1134978.
    So any idea how do we change the status from ACCEPTED to RELEASED?
    Deepti - in one of the thread you did mention about a workaround to update the status? Did you manage to crack it?
    Do you recommend having separate client for ROS, so that system automatically trigger XML message by standard?
    Regards,
    Sandeep Parab

  • Final Advice For Extending Network Needed

    Bob Timmons has helped me greatly here and I hope this may be the last time I'll ask these questions! I purchased a new AEBS to connect to my cable modem. I believe that I was getting significant interference from the many 2.4GHz networks in my community resulting in some erratic wifi behavior and download speeds. I set the AEBS to broadcast differently named 2.4 and 5GHz networks. My imac, MB Pro laptop, ipad and AppleTV2 all connect to the 5. Only our iphones now use the 2.4. As expected the 5N network has a weaker signal but the apparent lack of interference has completely stabilized the wifi connection on those devices and my download speeds on my laptop are identical on wifi or connected directly to the cable modem. So that has been a major improvement.
    However I'm thinking I might be able to improve the signal strength of the 5N network in the area that the devices are mostly used. The AEBS and cable modem are in a third floor bedroom while the devices are on the second floor. This doesn't affect the computers much but I get quite different download speeds on my ipad when I'm downstairs as opposed to when I'm upstairs near the AE. I'm not sure what the affect is on the Apple Tv, I don't know how you would measure download speeds on it, but I do see that the signal strength indicator has dropped a bar. So my thought is to use my Airport Express - the 1264 model - to wirelessly extend/boost the signal on the floor where all these devices are.
    There is a spot in my dining room on the second floor that is just below the bedroom that the AE and modem are in that seems to get a pretty strong signal from both the 2.4 and 5 network. I used iStumbler to check this in several locations on that floor. So my thought is to place the AX there. From the advice I've been given and what I've read this is how I plan to configure everything and want to check if I have everything correct.
    On the AEBS I would check allow this network to be extended. On the AX, wireless mode set to extend wireless network. I believe from that setting I'll be given a choice of networks or maybe have to manually enter the name of the one I want extended. I intend to extend the 5N network so I would use that specific name and the same password that is used on the AE. I believe I've read that there will be no option for channel selection as that would be controlled by the AE(?) I'm not certain what Radio mode would be, perhaps that is automatically set as well. Wireless security would be the same, I'm using WPA2 personal. I'm not sure what the connection sharing option would be with this setup, perhaps 0ff( bridge mode ).
    Are there any other settings I need to be aware of? Also since the network name will be the same on the AX as the AE and channels I believe will be the same is there any way to know which base station a device is connected to? I know I could open up Airport Utility and check wireless clients on both to see this but it would be nice to be able to this from the menu bar of the computers. Perhaps the BSSID would tell me that. The reason I would want to know this is to be able to see whether my download speeds are maintained through the AX with this set up. If they were negatively impacted I might forgo the whole thing and just leave things as they are.

    Suggest that you move the AirPort Express (AX) close to your AirPort Extreme for the configuration setup. Once you have it set up, you can move it to the desired location. It may take some experimentation to find the best location for the AX.
    On the AEBS I would check allow this network to be extended. On the AX, wireless mode set to extend wireless network.
    Yes, that is correct.
    I believe from that setting I'll be given a choice of networks or maybe have to manually enter the name of the one I want extended. I intend to extend the 5N network so I would use that specific name and the same password that is used on the AE.
    When you click on the Wireless Network name box, you should see the 5 GHz network and 2.4 GHz network displayed. Click the 5 GHz network to select it.
    I believe I've read that there will be no option for channel selection as that would be controlled by the AE(?)
    That's correct. The AX will use the same channel as the AEBS automatically, so you will not even see a setting for Channel on the AX setup.
    I'm not certain what Radio mode would be, perhaps that is automatically set as well.
    Yes, this is set Automatically to the same Radio Mode that the AEBS is using for the network that you are extending. You will not see a setting for this on the AX setup.
    Wireless security would be the same, I'm using WPA2 personal.
    Correct, same setting as the AEBS.
    I'm not sure what the connection sharing option would be with this setup, perhaps 0ff( bridge mode ).
    There will be no selection for Connection Sharing displayed on the AX setup. The AX is automatically configured in bridge mode when you select the "Extend" option.
    The "extend" setup is quite simple in AirPort Utility. Here are the basic steps:
    AirPort Utility - Manual Setup
    Base Station tab to name your device, establish a device password and adjust Time Zone settings
    Click the Wireless tab:
    Wireless Mode = Extend a wireless network
    Wireless Network Name = Name of your 5 GHz network
    Check mark next to Allow wireless clients.
    Security = Same as your AEBS
    Password = Same as your AEBS
    That's it.
    is there any way to know which base station a device is connected to?
    Yes. Open AirPort Utility and click on your AEBS. Look for the AirPort ID in the info to the right and jot it down. Do the same with the AX.
    Move your laptop close to the AX. Hold down the option key on your Mac while you click on the fan shaped Airport icon at the top of the screen. Look for the BSSID. That should be the same as the AirPort ID of the AX. If you see the AirPort ID of the AEBS, then the computer is connecting to that device, not the AX. Check your setup again if that is the case.
    Good luck!
    Message was edited by: Bob Timmons

  • DLV status not updated in Process order

    Hi guys,
    I did GR and got goods receipt documents but system is not updating  DLV status  in process order.
    Actually i have by-product and co-products as components in order. I did posting of by-product from Confirmation screen COR6N and for co-products i did MB31 and goods movement doc. get generated. Qty. is also updated in order but NOT the dlv status.
    Pl.suggest

    Dear,
    This is System status and you cannnot maintain it manually once that Business Transaction(FULL Delivery) happens System will automatically sets that status.
    DLV status updated once Del completed tick is activated in order header, This tick will get uodated once you do GR for complete qty.
    You need to Final confirm (CNF) the Order to get the DLV Status.
    Or if the Delivery completed indicator is set in the Process Order, then also th System status will be DLV.
    If you want to make it manually then goto co02, enter the order, goto goods receipt tab page and activate delivery completed tick and save...DLV is activated in the head as status.
    Please check in BS22-I0012
    Regards,
    R.Brahmankar

  • Doc status not updated

    Hi all.
    SRM 4.0, server 5.0, backend SAP 4.6C.
    We have some issues where we continue to see purchase orders in the users' Goods Receipt screens although both IR and GR have been made. I believe the BBP_GET_STATUS_2 is making sure that the when a user presses the Goods Receipt link in SRM, they only see their orders that are relevant for GR. What could cause that a PO hangs here even after GR/IR has been made? And of course more importantly - how do we remove them from the Status again?
    Thanks for input.

    Hi,
       I too faced the same issue. There are two reasons for that.
    1) If delivery completed indicator is not marked in the PO.
    2) Due to some technical reasons as said program error.
    Remedy
    1) If delivery completed indicator is not marked please mark it and rerun the job.
    2) Implement the BADI BBP_WF_LIST to restrict the PO worklist.
    For example: LOOP AT I_PDLIST and read all PO values with
    META_PO_GETDETAIL. In po_items-quantity you will get the PO quantity
    and in po_item_history_totals-deliv_qty the delivered quantity.
    3) Program correction. Though the below notes say for SOCO if you see the correction instruction they are meant for the same purpose.
    Notes
    0000549846  FAQ: Goods receipt confirmation EBP 
    0000718138  Reading of backend purchase orders for EC POs in EBP 4.0 
    0001072266  BBP_GET_STATUS_2: Item is not removed from Sourcing Cockpit 
    0001107688  SOCO: Submit to Grouping fails 
    0001123548  BBP_GET_STATUS_2: Purchase order goes to SoCo 
    0001130842  BBP_GET_STATUS_2: shopping cart sent back to SOCO 
    Please award the points if they are useful.
    Regards,
    Munna

  • SPD 2013 WorkFlow Status Column: Status Not Updated

    We are having an issue with the status display of the SPD Designer Workflow status column which is a read only column added by SharePoint to show the status of the workflow. We have some SharePoint 2013 Workflows built using SharePoint Designer that are
    attached to specific SharePoint Document Libraries. The expected behavior is for this column to show the workflow statuses (Not Started, Starting Workflow, In Progress and Completed. 
    Based on our observation this status is showing up although the column does get added for the Workflow that we have. Is there any other dependency for SPD Workflows that are attached to Document Libraries to show the status correctly? Any other settings/configurations
    to be made?
    Regards,
    Vikram
    Blog: http://dotnetupdate.blogspot.com |

    Hi Venkadesh,
    It is by design that 2013 workflow will show stage name in the workflow status column when
    Automatically update the workflow status to the current stage name is checked.
    And the workflow status column will be blank when Automatically update the workflow status to the current stage name is unchecked.
    For existing workflows, the workflow status will still exists with the previous values after unchecking Automatically update the workflow status to the current stage name.
    We can use Set Workflow Status action to update the workflow status value based on our needs.
    Best regards,
    Victoria
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Connector Status not updating

    As a result of a dramatic failure of communication the SCSM workflow AD account was deleted and recreated, after some muching about everything in SCSM is now working normally again except the config manager and AD connectors are not updating their status.
    I initially thought they were not running at all but I have confirmed that they are in fact synchronizing data from their respective sources and its just the display of the status that is not updating.  I tried deleting them and recreating them and
    now they display no status i.e. the start time, finish time, status, and Percentage columns are all blank.
    I have done a bit of research and believe that the problem is that the relationships between the Connectors and their respective SyncStatus objects is missing/broken, and for some reason creating new Connectors either does not establish a corresponding
    SyncStatus object or does but does not relate it to the connector.
    I have a couple of reasons for this hypothesis first is when I run this powershell*:
    $connectorDispName="Your Connector Name Here"
    #Following will return in instance of Microsoft.EnterpriseManagement.ServiceManager.Sdk.Connectors.ADConnector
    $myConnector=Get-SCSMConnector -DisplayName $connectorDispName
    #Get the EMO object for relationship lookup
    $emoConnObj=$myConnector.ConnectorObject
    #Relationship id can be retrieved with following:
    #Get-SCRelationship -Name 'Microsoft.SystemCenter.LinkingFramework.DataSourceHostSyncStatus'|select id
    $relationshipId='1548950d-6cea-d9c1-11ec-53701fbcbbec'
    #Find the matching relationship object (with the above relationshipId)
    $relationshipObject=Get-SCRelationshipInstance -sourceInstance $emoConnObj|?{$_.RelationshipId -eq $relationshipId}
    #$relationshipObject.TargetObject contains an EMO.
    #Grab the id and use Get-SCClassInstance to return a type of Microsoft.SystemCenter.LinkingFramework.SyncStatus
    $syncStatusObj=Get-SCClassInstance -Id $relationshipObject.TargetObject.Id
    The following error is returned:
    Get-SCClassInstance : Cannot validate argument on Parameter 'Id'. The argument is null or empty. Provide an argument that is not null or empty, and then try the command again.
    At D:\tools\scripts\ConnectorSyncStatus.ps1:14 char:40
    + $syncStatusObj=Get-SCClassInstance -Id $relationshipObject.TargetObject.Id
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidData: (:) [Get-SCClassInstance], ParameterBindingValidationException
    + FullyQualifiedErrorId : ParameterArgumentValidationError,Microsoft.SystemCenter.Core.Commands.GetSCClassInstanceCommand
    Possibly the Powershell is incorrect but this result implies to me that the Get-SCRelationshipInstance call is returning a null value for the syncstatus object which is being fed into the Get-SCClassinstance call.
    My second reason for this hypothesis is the following SQL results:
    select RelationshipTypeId from dbo.RelationshipType
    where dbo.relationshiptype.RelationshipTypeName = 'Microsoft.SystemCenter.LinkingFramework.DataSourceHostSyncStatus';
    1548950D-6CEA-D9C1-11EC-53701FBCBBEC
    select * from dbo.relationship
    where RelationshipTypeId = '1548950D-6CEA-D9C1-11EC-53701FBCBBEC';
    Returns no results.
    This implies to me that there are no instances of the relationship linking a Connector to its corresponding SyncStatus object.
    I am not an SQL or Powershell expert but I know enough to be dangerous, so does my reasoning seem correct? And if so how could I fix this?
    Thanks In advance
    * this Powershell is not of my own devising, I cribbed it from
    Steve IAnson in this question:
    Query Connector Status

    Yes there is every 1 minute there is a squence of entires as follows:
    Source: Lfx Service
    Event: ID 3334
    Data:
    Error setting status for property &. Error:The relationship source specified in the discovery data item is not valid.
    Relationship source ID: ae5465d3-2565-c7d3-0de2-acc994c1e928
    Rule ID: eb496966-4fb7-45bd-bdda-b689af383733
    Instance:
    <?xml version="1.0" encoding="utf-16"?>
    <RelationshipInstance TypeId="{1548950d-6cea-d9c1-11ec-53701fbcbbec}" SourceTypeId="{71f6cfcd-99b3-3a07-471d-bb9c4bf5ba76}" TargetTypeId="{2d4afd51-d2ff-92c6-266f-2b6060000dae}">
    <Settings />
    <SourceRole>
    <Settings>
    <Setting>
    <Name>29906075-e9fc-7bc4-487b-f964f91d6532</Name>
    <Value>1e6592a2-96c3-4b99-a50a-c04ee2a793e6</Value>
    </Setting>
    </Settings>
    </SourceRole>
    <TargetRole>
    <Settings>
    <Setting>
    <Name>29906075-e9fc-7bc4-487b-f964f91d6532</Name>
    <Value>1e6592a2-96c3-4b99-a50a-c04ee2a793e6</Value>
    </Setting>
    </Settings>
    </TargetRole>
    </RelationshipInstance>
    Status data:ConnectorId:ec4a037e-e0f0-47a2-b7e7-7932eba2a0ac;
    BaseManagementEntityId:e22fffb2-9b85-de47-fe3d-875914b21797;
    LastRunStartTime:25/11/2014 2:00:44 AM;
    LastRunFinishTime:25/11/2014 2:02:57 AM;
    NextSyncTime:27/11/2014 2:00:00 AM;
    Status:FinishedSuccess;
    SyncPercent:100;
    MaxValue:100;
    MinValue:0;.
    Source:OpsMgr SDK Service
    Event ID: 26319
    Data:
    An exception was thrown while processing ProcessDiscoveryData for session ID uuid:e47c3453-2524-44af-a9d9-2475e3a204a6;id=3.
    Exception message: The relationship source specified in the discovery data item is not valid.
    Relationship source ID: ae5465d3-2565-c7d3-0de2-acc994c1e928
    Rule ID: eb496966-4fb7-45bd-bdda-b689af383733
    Instance:
    <?xml version="1.0" encoding="utf-16"?>
    <RelationshipInstance TypeId="{1548950d-6cea-d9c1-11ec-53701fbcbbec}" SourceTypeId="{71f6cfcd-99b3-3a07-471d-bb9c4bf5ba76}" TargetTypeId="{2d4afd51-d2ff-92c6-266f-2b6060000dae}">
    <Settings />
    <SourceRole>
    <Settings>
    <Setting>
    <Name>29906075-e9fc-7bc4-487b-f964f91d6532</Name>
    <Value>1e6592a2-96c3-4b99-a50a-c04ee2a793e6</Value>
    </Setting>
    </Settings>
    </SourceRole>
    <TargetRole>
    <Settings>
    <Setting>
    <Name>29906075-e9fc-7bc4-487b-f964f91d6532</Name>
    <Value>1e6592a2-96c3-4b99-a50a-c04ee2a793e6</Value>
    </Setting>
    </Settings>
    </TargetRole>
    </RelationshipInstance>
    Full Exception: Microsoft.EnterpriseManagement.Common.DiscoveryDataInvalidRelationshipSourceException: The relationship source specified in the discovery data item is not valid.
    Relationship source ID: ae5465d3-2565-c7d3-0de2-acc994c1e928
    Rule ID: eb496966-4fb7-45bd-bdda-b689af383733
    Instance:
    <?xml version="1.0" encoding="utf-16"?><RelationshipInstance TypeId="{1548950d-6cea-d9c1-11ec-53701fbcbbec}" SourceTypeId="{71f6cfcd-99b3-3a07-471d-bb9c4bf5ba76}" TargetTypeId="{2d4afd51-d2ff-92c6-266f-2b6060000dae}">
    <Settings />
    <SourceRole>
    <Settings>
    <Setting>
    <Name>29906075-e9fc-7bc4-487b-f964f91d6532</Name>
    <Value>1e6592a2-96c3-4b99-a50a-c04ee2a793e6</Value>
    </Setting>
    </Settings>
    </SourceRole>
    <TargetRole>
    <Settings>
    <Setting>
    <Name>29906075-e9fc-7bc4-487b-f964f91d6532</Name>
    <Value>1e6592a2-96c3-4b99-a50a-c04ee2a793e6</Value>
    </Setting>
    </Settings>
    </TargetRole>
    </RelationshipInstance>
    at Microsoft.EnterpriseManagement.Mom.DiscoveryDatabaseAccess.ManagementStoreWriter.BulkUpsertRelationshipInstances(DiscoveryDatabaseApi dbApi, DiscoveryDataInstance discoveryDataInstance, Boolean isCalledByWorkflow, TypeSpaceData typeSpaceData)
    at Microsoft.EnterpriseManagement.Mom.DiscoveryDatabaseAccess.ManagementStoreWriter.BulkAddUpdate(DiscoveryDataInstance discoveryDataInstance, Boolean isCalledByWorkflow, TypeSpaceData typeSpaceData, DiscoveryDatabaseApi dbApi)
    at Microsoft.EnterpriseManagement.Mom.DiscoveryDatabaseAccess.ManagementStoreWriter.Write(DiscoveryDataInstance discoveryDataInstance, Boolean isCalledByWorkflow, TypeSpaceData typeSpaceData, DiscoveryDatabaseApi dbApi)
    at Microsoft.EnterpriseManagement.Mom.DiscoveryDatabaseAccess.DiscoveryPackageProcessor.ProcessWithNoRetryUnauthorized(DiscoveryDatabaseApi dbApi, Boolean useProcessContext)
    at Microsoft.EnterpriseManagement.ServiceDataLayer.DiscoveryDataManager.DiscoveryPackageIncrementalProcessingHandler.ProcessIncrementalDiscoveryData(DatabaseConnection databaseConnection)
    at Microsoft.EnterpriseManagement.ServiceDataLayer.DiscoveryDataManager.DiscoveryPackageIncrementalProcessingHandler.Process()
    at Microsoft.EnterpriseManagement.Mom.DiscoveryDatabaseAccess.DiscoveryPackageProcessor.ProcessWithRetry(HandleProcessing handleProcessing, RetryPolicy retryPolicy)
    at Microsoft.EnterpriseManagement.ServiceDataLayer.DiscoveryDataManager.ProcessDiscoveryDataWithRetry(DatabaseConnection dbconnection, Guid discoverySourceId, IList`1 sdkEntityInstances, IDictionary`2 streams, IContext context)
    at Microsoft.EnterpriseManagement.ServiceDataLayer.ConnectorFrameworkConfigurationService.ProcessDiscoveryData(Guid discoverySourceId, IList`1 entityInstances, IDictionary`2 streams, ObjectChangelist`1 extensions)
    Source:DataAccessLayer
    Event ID: 33333
    Data:
    Data Access Layer rejected retry on SqlError:
    Request: ProcessRelationshipStagingForUpsert -- (TransactionId=732419), (DiscoverySourceId=eb496966-4fb7-45bd-bdda-b689af383733), (TimeGenerated=26/11/2014 9:31:53 PM), (PerformHealthServiceCheck=False), (HealthServiceId=), (RETURN_VALUE=1)
    Class: 16
    Number: 777980002
    Message: The specified relationship doesn't have a valid source.

Maybe you are looking for