FINAL STEP BEFORE MAKING DVD

I have iMovie '09. I've downloaded my project into the DVD format. I want to put the last title on this project using the "rotating drum" which holds both copy and photos. I'm not sure how to get the copy inserted nor the photos.
Thanks for any help on this matter.....I'm too close to the end and don't want to quit.

+I've downloaded my project into the DVD format+
Do you mean that you sent the iMovie to iDVD and have created an iDVD project with the Revolutions theme?
If so, the title of your iMovie should be shown as the title on the revolving drum. If it is not the one you want, you can click on the text box with the movie's title and type in a new title. Then you should see it on the drum.
There also are drop zones for adding photos. In this theme, you can add a photo to the background and a dropzone that revolves with the title. Photos can be dragged directly onto the drop zone, or you can add them to drop zone boxes that you can reveal by clicking on the button with a dotted line icon with an arrow on it, found just to the right of the play button.
Please post back if I have missed what you are asking about.

Similar Messages

FREE TRIAL ON PAGEMAKER INSTALLED, BUT REQUIRES STUFFIT FOR FINAL STEP. CAN'T SEEM TO MANAGE THIS STEP. NEED HELP MANAGING THE FINAL STEPS BEFORE PAGEMAKER IS USEABLE. THANK YOU

HAVE INSTALLED PAGEMAKER, BUT BECAME CONFUSED WHEN "STUFFIT" SEEMED TO BE REQUIRED FOR NEXT STEP. NEED HELP IN FINAL STEPS IN DOWNLOADING PAGEMAKER FOR USE.

>I would like to purchase a new mac with the appropriate operating system that will
run pagemaker 7. If not, I understand that my current mac, Mac OS X, version
10.6.8, processor 2.8 GHz Intel Core i7, Memory 4GB 1067 MHz DDR3 will not support
either Pagemaker 7 or InDesign. My question is what package can I purchase that
will satisfy one or both of these needs? Thank you for any guidance.
R_Kelly created the discussion
"FREE TRIAL ON PAGEMAKER INSTALLED, BUT REQUIRES STUFFIT FOR FINAL STEP.
CAN'T SEEM TO MANAGE THIS STEP. NEED HELP MANAGING THE FINAL STEPS BEFORE PAGEMAKER
IS USEABLE. THANK YOU"
To view the discussion, visit: https://forums.adobe.com/message/6607524#6607524
>

What's the next step before making your site "live"

Hi,
I created a website and I wanted to get input on what my next step would be prior to uploading my website to the host server. It's all ready to go live I just figured there's probably some testing and validating I need to do on it to make sure everything is working as it should. So I wanted to know what are those next steps exactly? Are there any resources (ie: a website, etc.) out there on the web that can help me make this as painless as possible? I'm still fairly new to web design so the simpler the better.
Thanks!
ashmic19

Check spelling and grammar.
Validate CSS & HTML code.
To ensure menus, links and widgets all work, fully test your site in the 5 major browsers. If you must support older IE, get IE Tester.
http://www.my-debugbar.com/wiki/IETester/HomePage
Use Firefox's web developer toolbar.
https://addons.mozilla.org/en-US/firefox/addon/web-developer/
Web Page Analyzer & Optimization report
http://www.websiteoptimization.com/services/analyze/
Set-up Google WebMaster Tools and Google Analytics.
http://www.google.com/webmasters/
http://www.google.com/analytics/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Deinterlace 1080i60 for resizing before making DVD?

Hi there,
I've been working with AVCHD footage for a few projects now but am still learning about how HD works. I have a timeline which has 1080 60i (the timeline is 29.97) which I need to convert for SD DVD. On other projects I have let AME do the work for me and the presets (using Maximum Render Quality) were usually acceptable. However this project has some slow motion effects which are causing very noticable flicker/lines around the movement. I don't notice it much at 100% speed.
I have read that I should:
1. deinterlace to a 1 intermediate file.
2. resize
3. reinterlace
4. compress to Mpeg2 for DVD
Can anyone give me some ideas of where to start? I know I can use avisynth or virtualdub but in the past I could use a frameserver to get the footage to those programs. with cs5's 64bit requirement I can no longer use debugmode's frameserver.
Thank you for any direction!
-Stephen

I'll try that, thank you.
Right now I am playing around with Jell Bellune's tutorial on HD2SD (resizing) but it looks like the time to compress and the file sizes are pretty ridiculous... But I'll still give it a go and see what happens.
Another thing I noticed is durring disolves between shots it disolves in bands instead of evenly- this may be a different issue though so I'll look into that later...
Thank you again!
-Stephen

From: Apple-ID [mailto:Apple.International@Apple.id] Sent: Wednesday, December 11, 2013 7:36 PM To: Deborah McKay Subject: Final step To verify your Apple Dear Apple Customer, Your Apple ID has been used to open a session iCloud from an unauthori

From: Apple-ID [mailto:[email protected]]
Sent: Wednesday, December 11, 2013 7:36 PM
To: Deborah McKay
Subject: Final step To verify your Apple
Dear Apple Customer,
Your Apple ID has been used to open a session iCloud from an unauthorized device..
It's easy: Click the link Your iTunes account is now locked, please enter your account to verify your information. .
Update Now >
After you finished your account is confirmed, let us know immediately. Report, it is important because it helps us prevent fraudsters from stealing your information. Sincerely, apple.
copyright 2013 Apple Inc. Please do not reply to this email because we are not monitoring this inbox. To get in touch with us, log in to your account and click "Contact Us" at the bottom of any page. Copyright © 2013 apple. All rights reserved. apple (Europe) S.à r.l. et Cie, S.C.A. Société en Commandite par Actions Registered office: 22-24 Boulev ard Royal, L-2449 Luxemburg RCS Luxemburg B 118 349 apple Email ID PP315.
I just got this message and sent it to [email protected] per instructions on another post. the link leads to a page asking for Apple id and credit card information.

I got a similar email. It's obviously Spam. The double period afetr the first sentence and the otherwise poor grammar are dead giveaways even before I checked out the link embedded. -- I didn't click on it, just hovered over it to get the url. And the return address was [email protected] Very bogus.

Making Dvd's and movies to ipod

How do i send a dvd movie into an ipod i know quicktime pro can do it but i it wont even let me open the movie to go to export

http://www.apple.com/quicktime/mpeg2/
Read every line and the FAQ's page carefully before making any purchase.

Raid- Understanding "Hot Spare" and Windows reinstall - Final Steps

Hello all,
If you follow couple of my other recent threads here you will see I have a warning of a failing drive in my 4 tb raid (4 x 1TB raid set.)
Also for an unrelated reason I am also needing to reinstall Windows 7. (and of course my Adobe Master collection CS5)
I ordered a 5th drive to serve as "Hot Spare" and it will be arriving sometime today from Amazon.
I want to make sure I do the above "final steps" properly, in the correct order.
I am basing my "final steps" based on Harm's advice on another thread:
>>>
You can never be too safe with data, but if you follow the hot-spare, extend raid set and rebuild sequence, it is not necessary. Your data will be reconsructed automatically. That is the reason you use a raid3/5.
Your log file is a definite show of a serious disk problem. Replace it, create a hot-spare, extend your raid set and rebuild (it should be done automatically) and you are ready to roll
>>>>
(As a precaution I have done a backup of my raid, to an external drive)
So once my new hard drive arrives today from Amazon, I will, in the following order:
1) Replace failing hard drive. (Do I need to power down the computer to remove the failing hard drive and replace it with the hot spare? Or can I leave the computer powered on so that the raid software can continue its CONSISTANCY CHECK while II do all of the steps to rebuild the raid --- see note at bottom of this post...)
2) Create hot-spare
3) Use the Raid controller software (Areca) to EXTEND HOT SPARE
4) Rebuild raid (it should be done automatically)
THEN, after I confirm that the raid is working okay, I will
5) Reinstall Windows 7.
THe below step is what I am not entirely clear on:
6) I assume since the raid has already been rebuilt {before I did the windows 7 reinstall) I can do a very straightforward "reconnect" to the already working raid. In other words, I would reinstall the Areca raid software (using the Areca cd) and identify the raid and windows 7 will recognize the 4 tb raid as my raid drive.
I am tracking the delivery of my new hard drive and it is at least 5 or 6 hours away from arriving from Amazon.
**** CONSISTANCY NOTE: I the meantime I am having the Areca web based controller software do a CONSISTANCY check of the raid.
It is half way through the check and has found 144 errors so far. The consistancy check is rather vague about what it is doing. But can I assume that it is finding the errors and will automatically fix them.
Or do I have to do something to fix the errors once the consistancy check is finished (This is one reason why I would like to avoid powering down during the rebuilding of the raid.) Or will creating the hot spare, etc interrupt the consistancy check, meaning I must finish the consistancy check completley before rebuilding the raid.
Or should I abort the consistancy check and do that after I reinstall windows. (If possible I would like to do that so I can get on with the editing of my current project!!)
WHEW!
Rowby
Message was edited by: rowby

WEB BROWSER-BASED CONFIGURATION
132
6.6.5 Check Volume Set
To check a volume set from a RAID set:
(1). Click on the “Check Volume Set” link.
(2). Click on the volume set from the list that you wish to check.
Tick on “Confirm The Operation” and click on the “Submit” button.
Use this option to verify the correctness of the redundant data in
a volume set. For example, in a system with dedicated parity, volume
set check means computing the parity of the data disk drives
and comparing the results to the contents of the dedicated parity
disk drive. The checking percentage can also be viewed by clicking
on “RAID Set Hierarchy” in the main menu.
Directly from the Areca 1600 series Manual. I would let that finish.
Eric
ADK

What are the best imovie, mpeg4 settings for making dvds?

What are the best imovie, mpeg4 settings for making dvds?

• iMovie'08 to 11
- Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
• DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
• iDVD does only care about TIME / Duration as
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
• iDVD Does Region = Zero (to be played everywhere)
• Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
• NTSC - US etc
• PAL - EU etc
Yours Bengt W

New camcorder- final check before buying

An earlier thread helped me to decide which model to choose. I have settled on a Sony DCR-HC94E. ("E" is for "European".) It is said that FCE is picky about what cameras it will recognise. Therefore, the following are those parts of its spec. which I have detected from this forum as being important to satisfy FCE, and a few other features which suit my requirements. If anyone notices anything inadvisable, please shout. Thanks. Please note that I am not a professional and have not gone for a three-chip machine nor HD, on cost grounds.
Required by FSE:
Firewire. Actually, Sony’s iLink which is said to be Firewire although it has only 4 pins whereas Apple’s implementation has 6, the added two being for power. Sony tell me that when capturing, their camera must be connected to the mains and the four Firewire pins handle the data without trouble.
However, another point concerns page 15 of FCE’s “Getting Started”, which refers to “Apple Firewire” (the default) and “Apple Firewire Basic”, which “is a simplified device control protocol for camcorders and decks that aren’t compatible with the full Apple Firewire set. Using this protocol doesn’t affect the quality of the captured video or audio.” I am assuming that this is the same point above concerning 4/6 pins and that FCE will be happy if it turns out that the Sony iLink uses “Apple Firewire Basic”. Correct?
And that I will have Device Control?
In Easy Setup, should I select "Firewire Basic"?
The camcorder comes with a driver for the Mac, which provides for capture (presumably Device Control via FCE’s “Capture now” button).
DV, not MPEG.. whatsit.
miniDV tape cassette, not DVD, Hard Drive nor Solid state.
DV out. No DV in because, as I understand it, DV in is used for archiving video on to miniDV tape and I don’t think I would want that – I plan to archive videos on DVD as QT movies.
Sony say that the DCR-HC94E stripes a digital timecode on to the tape. I believe that FCE needs this.
Other Features (extract):
The chip is physically 16:9 and all its pixels are used in forming a 16:9 frame. If used in 4:3 mode, the pixels to the left and right are not used. I think that this is True Widescreen and not one of the compromise ways of achieving it by, eg., compression and subsequent expansion.
3.3 Megapixels “Advanced HAD CCD”.
10 times zoom (I would have liked more, but that’s life).
Manual focus, and full-range auto focus, White Balance (“Auto, Outdoor, Indoor, One-push”).
“Super SteadyShot”. (That is, anti-wobble control.) Electronic.
2.7 inch viewfinder LCD panel, 123,200 pixels
Low light performance - “Min. Illumination = 5 lux”.
Battery runtime = 2 hours.
No external mike (pity).
It is remarkably small. “What Digital Camcorder”, issue 77, has a praising review of the next model up (DCR-HC96E), the only difference being that the 96E has DV in.
Thanks for any observations before I plunge into my wallet and let the moths out.

Tom, Martin and Ian:Re. DV in etc. Thanks.
Being an amateur, (and beginner in video editing) my videos will, I think, be family movies; editing a 50-year old 8 mm cine film converted by a video lab to a PAL DVD, which I have nearly finished; and probably making videos of the country district where I live for depositing at the county library for future use, perhaps 100 years from now (if human civilisation survives that long which I doubt); and possibly some simple training videos. I am not planning on making artistic movies.
What I have been doing (so far only with the converted cine) is to edit it, export it as a QT file and use Toast (Roxio) to burn to DVD as the distribution version. (Toast also allows "burning" to a Disc Image, for checking before wasting DVD-Rs). I then check the DVD on a stand-alone DVD player and a domestic TV. I am assuming that all my efforts will likely follow that route.
Tom (and others) said:
"You want DV in. It lets you record your finished movie back to tape."
But why would I want to do that? Archiving? But is minDV tape so long-lasting? DVDs may not last more than 20 years and will need refreshing (re-recording on current media) which decendants won't do but that's another story. To view and check the finished video? But wouldn't my method (QT, DVD player, TV, described above) do that for me? To dub from a TV broadcast or to transfer to VCR tape via A/V? I have a combo VCR/DVD set-top video recorder which can do both of those (in the second case by dubbing from the above-mantioned distribution DVD).And VCR tape is on the way out, at least in the UK (Dixons no longer sell tape or tape-based VCRs) but of course peoples' tape VCRs will remain working for, say, 10 years.
On the lack of an external mike, its a budget thing. Sony Centre said that the only detectable camera noise would be if the ambient sound was very low and as a result the gain was increased. But hopefully I could add a suitable ambient audio track as a sound bed (Tom's book, page 132) to drown it - music, general ambient, sheep.
I'm probably wrong, but not too proud to be corrected.
Meteorites, hmmm... As a pessiminst, they worry me, but hopefully I will be dead before one strikes!

How do I sync my iPod to iTunes? I've used the final steps from Article HT1329, but when I open my iPod there is no "iTunes" folder.  Please help!

How do I sync my iPod to iTunes? I've used the final steps from Article HT1329, but when I open my iPod there is no "iTunes" folder. Please help!

Ah I see. That folder would only be there if you had perfomed the earlier steps in that section.
Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2

How do you erase and reinstall a hard drive without a disc? I bought this mac book pro under a year ago and am pretty sure i downloaded mountain lion from the app store. Basically Im having startup issues and this is the final step Ive reached

when I start my laptop it loads a third of the way and shuts down automaticallyI've tried to safe boot, repairing discs and clearing RAM but nothing has worked. basically I've come to the final step of having to a erase my hard drive and reinstall mountain lion however Apple support suggest that I install from a disc however I installed mountain lion from the App Store. can anyone help me go about this?

Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

ITunes no longer asks for my password before making purchases or updating apps

iTunes no longer asks for my password before making purchases or updating apps... my restrictions are set so that is should ask for a password immediately but it doesn't seem to ask for this since iOS7... anyone got any ideas????

Try changing Settings > General > Restrictions > Require Password to 'immediately'

How do I tell itunes (on a Windows XP PC) to start adding downloaded files to an external drive ? Starting itunes while pressing the shift key and then choosing works only for a MAC, I think. I only need this one final step. All is copied already

How do I tell itunes on a Windows XP PC to start downloading new songs to my external drive ? The whole library has already been moved. I am just one final step away. Everything I`m downloading still lands on C: Relaunching itunes while pressing "shift" and then getting prompted to choose library might work for a Mac, it doesn't for Windows.

In iTunes click on 'Edit', then 'Preferances', Click on the 'Advanced' button, change the entry in the 'iTunes media folder location' to point to your external drive.

Creation of WDS fails on final step - unable to update settings

Hey Ya'll -
I've setup my WDS several times in the past and it's always worked flawlessly. For whatever reason, it quit working recently, and I decided to do a hard reset on my routers and re-create the WDS. I have two Airport Extreme Base Stations.
I've followed the instructions for creating a WDS to the letter. It does everything exactly right until the final step ... after it says "WDS created succesfully" - I click OK, and it says:
1) rejoining this base station's network
2) writing base station configuration ...
It hangs up here, and after about 5 minutes, it finally unlocks (spinning colored beach ball) and says "the airport admin utility was unable to update the settings of the selected base station".
Both base stations are in range right here on my desk. I've tried this 4 times now, and it crashes in the same place everytime.
If I run Airport Admin Utility on each router separately, to change the password, rename the router, etc., it connects easily, writes the configuration, and exits properly. I've done several tests (changing the name of the router, mostly) and I've even tried doing the manual WDS creation, but it does not work.
I have 10.4.3 with Apple Base Station V5.6 and Apple Airport Admin Utility Version 4.2.
Help!~?
Thanks,
FRED

I would suggest going to
https://helpx.adobe.com/support.html
and jumping through whatever hoops are needed to get to the CHAT capability, then initiating an online chat with an Adobe Support person. You will end up speaking with someone in India, but I've had strange problems such as yours solved several times this way. You need to be patient, as it's not a "quick" process, but it should get you to where you need to go.
Good luck.

Best export method of footage from Final Cut Express to DVD?

I'm exporting footage from Final Cut Express using Quicktime Player and then burning the footage to DVD using iDVD.
The end result on DVD has very jagged interlacing (or noise) on objects in motion which aren't present when viewing the footage on FC. I don't think the problem is with iDVD (I assume I'm burning a pristine copy of an already reduced-quality clip).
Are there any changes I can make to the system preferences either on FC or Quicktime Player to reduce or prevent loss of digital information, or can anyone suggest better methods of export from Final Cut Express to DVD?

Hello
I'm not sure if this is relevant:
I've been using the Quicktime Conversion settings;
http://www.locationstudio.net/Settings.jpg
29.97 Frame Rate
Highest Quality
NTSC/PRO
I was under the impression that this was usually best - haven't had any problems with iDVD
Mike

FINAL STEP BEFORE MAKING DVD

Similar Messages

Maybe you are looking for