Final Windows XP32/XP64, Vista32/64 Compatible drivers for E-MU USB serie audio devices available

http://www.emu.com/support/vista.asp
Driver & Firmware update download link:
http://www.emu.com/support/files/dow...cy=&Platform=1
MAC drivers & firmware update:
http://www.emu.com/support/files/dow...cy=&Platform=2
jutapa

maiki wrote:
Jutapa wrote:
Hmm... maybe you didn't open the page(s) there before postinghere?
As stated there:
E-MU® 0202 / 0404 / Tracker Pre USB Web Install Package v1.3
Date: 2/1/2008
Size: 69.8 MB
------------------------------------------end quote-----------------
My reply:
What???? Why do you suppose I didn't open that page? If I didn't open that page, how could I have quoted from it?
As I quoted in my previous post, as you quoted in your reply above, the drivers on that page are listed as "Tracker Pre". (Excuse me, but I don't know how I could have known that it was described as such on that page, if I had not even opened that page? Strange assumption on your part, if I may say so!)
In any case, I asked you (or anyone who knows) what that designation "Tracker Pre" means. (Pre Beta?) That certainly does not sound like a final version. Especially considering that the driver of 4/23/2007 is also still listed on that page, it really does not look like the driver of 2/1/2008 is "final", full (non-beta) driver.
So, why does the title of this thread describe the driver at the linked page as being "Final"?
Please explain.
And please, do not make silly assumptions, that I did not visit a page, when it should be quite obvious that I had done just that. Thank you.
Message Edited by maiki on 02-26-200811:44 PM
LOL
Tracker Pre is just another audio interface model E-MU has recently prepared ...
jutapa

Similar Messages

  • DRIVERS FOR HP LASERJET 1005 SERIES FOR WINDOWS 8.1 64 BIT

    Hello!
    When I can get drivers for hp laserjet 1005 series for windows 8.1 64 BIT?
    My printer work perfect and i would not chance it!
    Is anny solution there?
    Thank you for your answer.

    Hi, the 1005 Laserjet is not supported in Windows 8/8.1, see this link.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • G555. Need drivers for SM Bus and another Unknown device for Windows XP.

    I try to install Windows XP on my G555. I got all other drivers, but cannot find drivers for SM Bus and an Unknown device. And what's this device?
    The second problem is that after I installed all the drivers, the card reader disappeared. It was there after I installed Windows XP, before I install drivers.
    Thanks a lot.
    A Simpleguy
    Solved!
    Go to Solution.

    Hi Simpleguy,
    Welcome to the forum!
    In thinkpads, it's usually intel chipset driver. For AMD based G555, I wouldn't be surprised if this is the driver you need:- http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_2476.html
    As for other unknown device, find it's PCI ID with any other known information and paste here.
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Windows 7 Touch Screen and Video Drivers for HP Pavilion tx1219us

    Updated to windows 7 and can't find drivers for the Video Driver and Touch Screen.  Can anyone help me?

    Bummer...
    That is even an older GPU than the GMA 900.
    It is an Intel 82852/82855 GM/GME Graphics Controller.
    OK... I have a possible driver you can use for that.  No guarantee it will work great but it should work...
    Here is the link to my OneDrive folder.
    https://onedrive.live.com/redir?resid=832F4957D2E51B93%21263
    Download and unzip the file labeled Intel 82865g Driver (Vista - Win7).
    You have to use the manual install method like you did with the other 2.
    Good luck!

  • Anyone have an updated link to the unspported drivers for the X-Fi series?

    JAnyone have an updated link to the unspported drivers for the X-Fi series?dI honestly cannot believe what I'm reading about all the people having problems in Windows 7. Having just upgraded to it and being a loyal CL customer since I've been building PCs, decided to upgrade my Audigy 2 and bought an X-Fi Gamer only to be rewarded with the inability to install the drivers, and I find out I'm not the only one and it actually seems...very common...what? Are you even serious Creative? All these posts about people not being able to use your cards with Windows 7 and you don't do a thing? Anyway, if someone has a mirror for the supposedly working unsupported drivers that would be great, every mirror I've found is outdated. If someone has them and they work, great, but I'm seriously never buying one of your products again if this is how you do customer service. If not, newegg's return policy is great, Asus here I come, sooner or later

    Nsame here broo i won't buy ever product from creative company. I realy tought it's best music card ever ( and expensi've for normal beaing ) but they are just funny with their customer support. anyway just pm me with mail adres ill sent you unsuported drivers, or you can download them from my site (but pm me first i need to make that they won't charge you for downloading it )

  • Drivers for hp pavilion g series

    can i know the complete drivers for hp pavilion g series. running windows 8.1.
    thank you for the help.

    Please Click Here to view the list of downloads for HP Pavilion g6-2392nr Notebook PC
     * * * * * * * * * * PLEASE DO NOT DOWNLOAD BIOS, FIRMWARE AND CHIPSET DRIVERS FROM THIS LINK * * * * * * * * * *
    Please check the model type of the LAN Card, Wireless Card, Touchpad Model and accordingly download and install the drivers you are looking for
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    I work on behalf of HP

  • T440 - DWM service is crashing in windows 7 64 bit after installing drivers for USB Replicator

    Dear All,
    Good day!,
    This will be my first post to the community and looking forward for an expert advise on the issue am facing with Lenovo ThinkPad USB Port Replicator with Digital Video drivers in Enterprise 64bit running on T440, following are the details:
    Environment:
    Windows 7 Enterprise 64bit installed on T440 where all drivers are up to date for all devices though (System Update 5) tool.
    Requirement: Usage of Lenovo ThinkPad USB Port Replicator with Digital Video (M01060) which will be connected to . 
    Steps followed:
    Connected to the port replicator before installing the device driver. 
    Download and installed device driver from the link: http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-73088
    3.    Issue: After installing the device driver above, system reboots and after logging back using the local admin account or any other windows account (DWM service) crashes along with any other software installed (Ms. Office, Lync, IE9, ...ext). Tried uninstalling the driver, rebooted and Windows runs smoothly again back with no errors.
    4.    Questions:
    T440 hardware compatible with Lenovo ThinkPad USB Port Replicator with Digital Video ? 
    Which USB version Lenovo ThinkPad USB Port Replicator with Digital Video has ? (2.0 or 3.0) ? did I missed some special drivers for USB ? 
    Any other links for the above driver can be found for Win 7 Enterprise 64bit ?
    For 3 days, am searching the web for a similar issue, found and followed all troubleshooting steps mentioned by others but none of them helped. I will really appreciate your support if any expert can advise. Thanks in advanced

    I have the same problem with my T400 updated to Win 7 pro.  Not happy.  

  • Windows XP/64bit cannot install MPA drivers for C5

    I'm successfully using Nokia OVI Suite for my C5 on windows XP / 64 bit.
    But The OS cannot install the MPA drivers for accessing the device directly in Windows Explorer. Every time I connect the mobile using "mass storage" or "data transfer" mode (don't know the correct names - I'm using the german interface), the OS tries to install the drivers and finishs the "New Hardware"-dialog with the following message:
    There was a problem installing the hardware: C5-00
    An error occured during the installation of the device.
    The class installer has denied the request to install or upgrade this device.
    Please help!
    Kind regards,
    Doris C.

    hi dunchilla,
    Could you please try this once?
    1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
    2. Delete the files from here If anything is there
    C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
    C:\Documents and Settings\user\Local Settings\Application Data\Nokia
    C:\Documents and Settings\All Users\Application Data\OviInstallerCache
    3. Please search and download MSI clean up utility from microsoft website
    Once installed please select the programs related to Nokia and click remove.
    Restart Computer.
    Then download from microsoft website and install Windows Installer, so that the installer is upto date.
    4. Restart the PC
    5. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/​nokia-ovi-suite
    6. Connect the device and select pcsuite mode
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Windows 7 x64 only installs the drivers for USB devices that are plugged in upon system startup

    Hi all,
    I have a most unusual problem. On my personal desktop, I can only use USB devices that are plugged in upon system startup. If I unplug a USB device and then plug it in again, the driver will not install correctly. I cannot force the device to start and I
    can't pick a driver manually. All I get is this. If I plug in a USB device and then reboot, the driver gets installed correctly and I can use it until I unplug it again. I'm pretty sure it's a Windows issue
    but I can list the hardware I have if it is needed.
    I have tried:
    Running an SFC /SCANNOW as administrator
    Uninstalling all USB controllers via device manager and letting them reinstall
    Neither worked to resolve the issue. If this was a client's computer I would probably just reinstall Windows but because this is my main work PC it'd be a huge hassle to do it, so I'd really appreciate any other ideas anyone has. If I have to reinstall I
    will. Thanks!

    Hi,
    Since the issue just happened for 4 monthes, I consider that some changes or updates may cause the issue.
    Please also try to restore the system back to the point before this issue.
    You can also try these steps:
    1.Power down your laptop or desktop
    2.Physically unplug the computer.  If it’s a laptop, remove the battery too.
    3.Leave it disconnected for three minutes
    4.Replug the desktop or reinsert the battery
    5.Power on the system
    For the reasons, you can refer to this article:
    How to fix “USB device not recognized”
    http://www.fixedbyvonnie.com/2013/10/how-to-fix-usb-device-not-recognized/#.UvtCLf7xvwo
    Kate Li
    TechNet Community Support

  • Drivers for ThinkVisio​n USB Soundbar (40Y7616)

    After installation of new ThinkVision USB Soundbar (40Y7616) on Windows XP the device is not recognized by OS, it shows as "USB Audio Device" in device manager, but Windows can not find a driver, and no driver was shipped with the speakers.  Search of IBM/Lenovo download and could not find the drivers.
    If somebody can point how to download drivers it will be much appreciatied.

    Since no one else has replied, I'll take a stab at this even though I don't have this soundbar.
    From what I can see on Lenovo's website, there are no drivers specifically for this device. When you plug it into a USB port, Windows should recognize it and you should be able to get sound out of the speakers. Is that not the case?
    You might try to delete the  "USB Audio Device" in device manager, power down, then reboot with the soundbarplugged in. Windows should then recognize the device and install whatever drivers it needs.
    Cheers... Dorian Hausman
    X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

  • XP Drivers for Conexant High Definition Smart Audio 221 - Do they exist?

    I recently purchased a Compaq C776CA and installed XP Home SP3 in order to be comaptable with my software requirements.
    Unfortunately the only drivers that I have been able to find for the sound chipset are Vista drivers, and that means that my microphone is not working.
    Has anyone been able to overcome this?  Are there XP drivers available that I have not been able to discover?
    Compaq Presario C776CA Intel Core 2 Duo T5750 3 GB DDR2 Ram
    Windows XP SP3
    Conexant High Definition Smart Audio 221 Mobile Intel 965 Express Video Chipset

    In an old topic I dug up that it seems XP's SP3 needs an updated UUA driver, I don't know much about that issue but here's the link to it which you may need.
    http://www.dashken.net/uploads/technology/software/XPSP3/Universal_Audio_Architecture_High_Definitio...
    To clarify the rest of what we've covered, you didn't use the device ID I posted but used the one shown in the properties for yours and it still didn't find the device after having installed the MS UAA driver?  I might not have explained it well, some of the driver packages have a different "DEV_####" earlier in the same line which also needs changed, while others don't.
    From the Vista Conexant Audio driver on your system's download page, I got this device & subsystem ID:
    DEV_5045&SUBSYS_103C30D9
    Unless HP is offering the wrong Vista driver for your system, this should be the one seen in Device Manager, the properties for the HD Audio device. 
    If that is right in the INF file for any of these drivers we've linked, when you run the setup.exe it should find the audio device and install the driver.  Whether or not that device then works has a lot to do if it's the right driver, but it seems to be.  Google turned up a few references of others editing their INF file with the string yours seems to have.
    Here's the 34200 driver with the above dev & subsys ID edited into it, try that.  At worst if it bluescreens the system just boot to safe mode and get rid of it in add/remove programs.
    http://www.mediafire.com/?dvu1tudnljg
    If it doesn't work I'd begin to wonder if part of the Intel chipset driver isn't installed, or if XP's SP3 is causing the problem but perhaps the above linked MS UAA file will take care of that.
    As for the other drivers in their original form, based on the above DEV & SUBSYS numbers, if 5045 and 103C30D9 are correct, we can rule out the first driver both I and Cheryl linked as not possibly working (unless it's edited) since it lists a different pair of strings: DEV_5051&SUBSYS_103C30CD & DEV_5051&SUBSYS_103C30D6
    The second driver I linked in my first post to sp35270 also won't work (again assuming the first DEV & SUBSYS #s above are right for your system), unless edited, because it lists DEV_5045&SUBSYS_103C30A5
    Same for the original sp34200, it lists DEV_5045&SUBSYS_103C30B7 & DEV_5045&SUBSYS_103C30BB, but it seemed as close a match as any so it's the one that was edited and on mediafire.
    Message Edited by James_Cummins on 11-25-2008 01:35 AM

  • Are there drivers for a canon mf5700 series

    I have an old canon mf5770 and can't seem to find drivers for the mac. any ideas?

    Canon has not released a Mac driver for the MF57xx series. It must use a Canon proprietary protocol.
    So with only Windows drivers available, your options are;
    Install a Virtual Machine application on your Mac and then install a version of Windows
    Enable BootCamp on your Mac and install Windows on that partition
    Connect the MF5770 to a Windows computer and share it. Then print from the Mac to this Windows share using this procedure.

  • Are there LabVIEW drivers for the MCC USB-501 temperatur​e logger

    I am looking to purchase the MCC USB-501  and use it to acquire the ambient temperature on an event driven basis. The data logging portion is something I am interested in, I just want to have my application acquire the tempture when a certain event occurs. Does anyone have any LabVIEW drivers for this device?

    I don't know what you mean by using a logger that collects data on an "event driven basis".
    It is nifty little device, but it basically does one thing.  It logs data.  You load the software, configure it for when to start an how often to log data, unplug it, and put it where you want to log the temperature.  When you're done, you get it plug it back in and download the data that was logged.
    There is no way to configure it to react to events.  It's possible that a LabVIEW driver exists for this, but all it would do is provide an alternate way of downloading the data instead of using the software that comes with it.  It is not an immediate or interactive piece of hardware like a normal data acquisition card would be.

  • Drivers for Belkin F5U220 USB PCI card

    I am trying to install Belkin F5U220 USB PCI card into my G4. There are no drivers on the CD or Belkin's website. After installation, I connection Apple mouse. The mouse indicator was lit. But does not work. Where can I get drivers for this PCI card ? I read several posts here that this card worked on many systems. Wondering how it worked... Appreciate any help.

    The drivers are built into the operating system.
    Does the card appear in your system profiler?
    When I plugged in my usb 2 card it just worked. From time to time I had to reset the pmu to get things reset properly but it has been 2 times in 2 years. (lots of 2's in my post, huh?)
    Apple seems to have removed the link to the reset of the pmu so I'll give a readers digest.
    Open the mac
    Touch the power supply case to ground yourself
    Remove the battery and check the voltage (3.6V)
    Press the pmu button (3/8"square box with a bb size button in the center). Hold it down for a 3 count. Don't press it more than one time or you will mess things up
    Replace the battery
    Restart the mac with the usb2 card in it.
    See if that helps

  • 3rd party ASIO drivers for Creative external (USB) soundca

    If you're using your USB soundcard for music making (recording) and you're suffering on
    latency problems, you might want to check this out.
    USB Audio (http://www.usb-audio.com/) is offering low latency USB ASIO driver, which is
    statet to be compatible with Creative's external (USB) soundcard models:
    - Audigy 2 NX (48 kHz only / not on Mac OS X yet),
    - Extigy (48kHz only),
    - MP3+ (48kHz only),
    - SoundBlaster Li've 24bit external
    <i>Limitations using Creative Extigy with this driver: 48 kHz, stereo output, line or
    mic input (digital input only while output is muted), no MIDI, no remote control
    functionality. We worked hard to change this, still it seems to be impossible at the
    moment. </i>
    USB ASIO is commercial product, but there is a demo version available, so you can test
    if it would make your life feel easier (http://usb-audio.com/download.html).
    .jtp

    OK, I can now CONFIRM that this problem IS with the latest (but rather old) Kensington V3.0 driver. From Kensington Tech Support:
    Subject:
    (Info) Expert Mouse & Leopard - scroll ring no longer zooms Mac screen in and out
    Discussion Thread
    Response (Asif Ali) 11/03/2007 01:05 PM
    Thank you for contacting Kensington Technical Support.
    I sincerely apologize for the inconvenience caused to you.
    I understand your concern. I regret to inform you that Mouseworks 3.0 on 10.5 breaks the native Ctrl + Scroll to Zoom functionality, but for now the solution is to Uninstall Mouseworks if this functionality is preferred. As we test the Expert Mouse & MouseWorks on the release version of Leopard and found that all functionality/programmability works with MouseWorks installed except for scroll wheel zoom.
    However as we have forwarded the issue to our software development team, we are expecting an updated release very soon.
    I appreciate your understanding and patience.
    Regards,
    Asif Ali
    Kensington Technical Support

Maybe you are looking for