FinalCut 703 doesn't start - missing a "quartz extreme system"

I run Final Cut Pro 7.0.3 under OSX 10.7.5 on a MAcbook Pro 17"
all of a sudden I get an error when starting FCP. An Error Box telling me I need a quartz extreme compatible system apperas and allows me only to quit FCP.
I haven't done any changes to the display settings recently and I don't know where it comes from.
A reboot solves the problem, after this FCP starts as usual...
any ideas what is going wrong ? could it be a hardware issue ??
thx Jo

That message has been around for a least since FCP 5. It happens sometimes.
Pressing the Esc key will get you out of it.

Similar Messages

Journal doesn't start after latest upgrade; result, system won't boot

... and I'm not sure how to get any useful information. I can boot from the Arch installer and mount my /boot and / partitions, but when I chroot into the mounted root dir and run journalctl, there is no output after the last good shutdown (which all looks normal; there wasn't anything unusual in the pacman output either, no warnings, and I didn't --force any packages).
The only output I can get is "A start job is running for Journal Service" (and then it shows the timeout state) during boot. If I wait long enough, the Journal Service is eventually restarted, and continues to not start.
I'm guessing there's a flag I can pass in to the grub.conf, or some other technique, but I'm stuck at this point. Anyone have any suggestions?
-TIA

You can use RecBoot to get it out of recovery mode or try doing a manual install, as outlined in link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Quartz Extreme Missing?

Hello,
I recently tried to run my copy of Final Cut Express 3.5 but it said I am missing the Quartz Extreme Support. I'm using a MacBook. I read on the minimum requirements that Final Cut Express will work with MacBooks, and my copy of Final Cut Express worked fine when my MacBook ran Tiger. I recently upgraded to Leopard and now it doesn't work anymore.
Anyone have any solutions?

I'm having the same problem. When I tried to open FCE yesterday, I got the error warning:
• Final Cut Express requires that your system have a Quartz Extreme capable video card.
I'm using FCE4 on a MacBook Pro and nothing has changed on my computer since I last used FCE on Thursday.
Wasn't there a FCE software update a week or so ago? Should I go back in the Time Machine to before that update? I tried the simple solution listed below, but my system was already set for millions of colors.

10.4.4 broke Quartz Extreme

Hopefully an easy question for somebody here:
I installed the full suite of new Software Update fixes last night (10.4.4, Quicktime, iTunes, etc.) and it appeared to run and restart without a hitch. However, an hour later when I launched Soundtrack Pro 1.02 -- my most important app -- it failed with the following error:
Configuration Error:
This software requires certain hardware or software which is missing.
* Quartz Extreme Support.
It ran fine earlier in the day, before the update. At first I thought this was a Soundtrack Pro problem, but a few other signs on my Mini indicate that maybe there is a problem with Quartz Extreme now. E.g., the Electric Sheep screensaver is slow and jerky, where previously it was smooth.
Can anyone give me some guidance on where to look to see if any configuration settings might be broken, or how to reset them? Thanks in advance.
Mac Mini Mac OS X (10.4.4)

I appear to be in the same boat as you. My MDD has a Radeon 9000 Pro which has been Quartz Extreme capable since the day I purchased the machine.
After the 10.4.4 update I can no longer launch DVD Player (it says "A valid video device could not be found for playback. [-70017]"), Exposé is choppy, and video files in Quicktime Player take tons of CPU usage and yet play choppy.
System Profiler now says that Quartz Extreme is "Not Supported". What happened?

Need Quartz Extreme video card

I'm planning to resurrect my of MDD for my son but the video card need charging to improve the GUI lag.
At the moment I have an ATI Radeon 9000 Pro in my dual 867Mhz MDD but the GUI is sluggish and the video card doesn't support hardware accelerated Quartz Extreme, everything is handled by the CPUs.
I am looking too replace the video card for something that will speed up the OS X GUI;
Core Image: Hardware Accelerated
Does the ATI 9600 Pro support this?
Also what other video card options do I have? I've seen references to the Radeon X800 and GeForce 7800 GS but I'm just not sure.

Hi,
Well the ATI 9800 Pro video card arrived yesterday morning and was easy to install. I instantly could see the GUI was smoother (but no where near my MacPro ATI Radeon HD 3870) but still choppy. And yes, the profiler said QE was supported with Core Image hardware acceleration, which is what I was looking for; less demand on the CPUs for rendering the GUI.
No drivers required, just slot the card in and away it goes. There was some ATI utilities to install but these were not required to make it work, I think.
RAM
I have 1.5gb RAM in the MDD, the memory is quite old now. Maybe its worth replacing it with some PC2700 spec RAM of today. I can't remember if the RAM is properly matched, so I'll look into that. RAM is cheap these days and four 512mb, crucial lists at $17.99 each.
Boot Hard Disk
After replacing the RAM, maybe look at replacing the boot HD, its still running on the original drive from the factory. Maybe a SATA PCI card and have two RAID 0 (striped) boot drives, something like a FirmTek SeriTek/1S2 and a couple of 10,000rpm drives.
Question: Can I boot my PowerMac from a couple of striped drives using Apples software RAID? or will this be a backward step, maybe a cheap PCI Raid card would be a better option.
Question: Can you get a PCI SATA card that supports hardware RAID 0?
Comment
Its kinda find doing all this with my old PowerMac, first time ever its received any kind of attention like this, well maybe just the Verax fans when I first I got this PowerMac in Sept 2002!

Opening iTunes shows an error- The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem. ; Even after reinstalling iTunes doesn't start!

When I start the iTunes program it comes up with this.. pls help!!
"The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem."
Even after reinstalling iTunes doesn't start!

Repair your Apple Application Support.
Control Panel > Programs n Features (Win7) or Add n Remove Programs(XP) > highlight AAS, click CHANGE then REPAIR.

Airport for Windows doesn't start due to missing dnssd.dll?

I've just installed AirPort for Windows v5.4.2 on my Windows XP SP3 laptop, yet it doesn't start due to a supposedly missing dnssd.dll file.
The error message states: "This application has failed to start because dnssd.dll was not found. Re-installing the application may fix this problem" .
Re-installing does not fix this. Any ideas?

That's interesting. It's actually a BonJour dll, and it lives at:
C:\WINDOWS\system32\dnssd.dll
I can replicate your error message by dragging the dll out of system32 and on to the desktop prior to trying to launch the Airport utility.
If it has gone walkabout for you in a similar fashion, here's a way of getting it back.
Restart the PC. Now head into your Add or Remove Programs Control Panel. Select BonJour, click "Change" and then click "Repair".
Does the repair install of BonJour go through properly? If so, can you open the Airport utility without the error message?

Jdeveloper doesn't start after Weblogic upgrade.

I had Jdeveloper Studio 11.1.1.3 and Weblogic 10.3.3 and everything was working fine. I upgraded WLS to 10.3.4. Now, Jdeveloper doesn't start. jdeveloper.exe doesn't give any error. But nothing happens. We can see the process in Windows Task Manager. Running D:\WLS\Middleware\jdeveloper\jdev\bin\jdev.exe gives following error:
java.lang.NoClassDefFoundError: oracle/javatools/util/Maps$AbstractCacheMap$ReferenceType
at oracle.ide.model.NodeFactory.<clinit>(NodeFactory.java:74)
at oracle.ide.model.Node.setURL(Node.java:562)
at oracle.ide.model.Node.<init>(Node.java:419)
at oracle.ide.model.DataContainer.<init>(DataContainer.java:59)
at oracle.ide.model.IdeSystem.<init>(IdeSystem.java:67)
at oracle.ide.IdeCore.getSystem(IdeCore.java:590)
at oracle.ide.IdeCore.getPreferences(IdeCore.java:600)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1515)
at oracle.ide.Ide.startup(Ide.java:703)
at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
at oracle.ideimpl.Main.start(Main.java:184)
at oracle.ideimpl.Main.main(Main.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:62)
at oracle.ide.boot.PCLMain.main(PCLMain.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:189)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:89)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:65)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccesorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: oracle.javatools.util.Maps$AbstractCacheMap$ReferenceType
Dependent class: oracle.ide.model.NodeFactory
Loader: ide-global:11.1.1.0.0
Code-Source: /D:/WLS/Middleware/jdeveloper/ide/extensions/oracle.ide.jar
Configuration: boot classpath entry in oracle.ide.boot.PCLMain.BOOT_ENTRIES
This load was initiated at ide-global:11.1.1.0.0 using the loadClass() method.
The missing class is not available from any code-source or loader in the system.
at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2190)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1733)
at oracle.classloader.PolicyClassLoader.access$000(PolicyClassLoader.java:143)
at oracle.classloader.PolicyClassLoader$LoadClassAction.run(PolicyClassLoader.java:331)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1692)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1674)
... 35 more
IDE boot startup failed.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:189)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:89)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:65)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:62)
at oracle.ide.boot.PCLMain.main(PCLMain.java:54)
... 17 more
Caused by: oracle.ide.ExitNotAllowedException
at oracle.ide.IdeCore$1.checkExit(IdeCore.java:241)
at java.lang.Runtime.exit(Runtime.java:88)
at java.lang.System.exit(System.java:904)
at oracle.ideimpl.Main.start(Main.java:199)
at oracle.ideimpl.Main.main(Main.java:146)
... 23 more
Boot startup failed.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Caused by: oracle.ide.ExitNotAllowedException
at oracle.ide.IdeCore$1.checkExit(IdeCore.java:241)
at java.lang.Runtime.exit(Runtime.java:88)
at java.lang.System.exit(System.java:904)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:71)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
... 8 more
Didn't get much info on googling. Any help is appreciated.
Thanks,
Vikas

Vikas,
When using JDeveloper, the integrated WLS and ADF version are tied to the JDeveloper version - you cannot upgrade individual bits and bobs like that. There is no problem, by the way, having multiple versions of JDeveloper installed at the same time. I currently have 11.1.1.3 and 11.1.1.4 installed (different directories, of course) with no issues. In fact, I used to have many, many more releases installed, but I decided to clean up ;)
John

[SOLVED] systemd/cron as user: timer doesn't start after boot

Hello,
I've tried to follow the wiki's systemd/cron functionality article to have a systemd service to run hourly.
Everything seems to be working ok, except that the hourly timer doesn't start automatically : I have to issue a
systemctl --user timer-hourly.timer start
command every time I start the machine to get the timer running.
Can you help me understand what I'm missing to get the (user) timer to start automatically after boot?
Thanks!
My setup consists of the following files:
/home/myuser/.config/systemd/user:
drwxr-xr-x 2 myuser users 4096 Jun 25 17:30 basic.target.wants/
-rw-r--r-- 1 myuser users 217 Jun 25 10:08 db_backup.service
-rw-r--r-- 1 myuser users 232 Jun 25 10:08 test.service
-rw-r--r-- 1 myuser users 61 Jun 19 12:14 timer-hourly.target
drwxr-xr-x 2 myuser users 4096 Jun 25 10:10 timer-hourly.target.wants/
-rw-r--r-- 1 myuser users 134 Jun 19 12:14 timer-hourly.timer
/home/myuser/.config/systemd/user/basic.target.wants/:
lrwxrwxrwx 1 myuser users 50 Jun 25 10:08 timer-hourly.timer -> /home/myuser/.config/systemd/user/timer-hourly.timer
/home/myuser/.config/systemd/user/timer-hourly.target.wants/:
lrwxrwxrwx 1 myuser users 49 Jun 13 15:51 db_backup.service -> /home/myuser/.config/systemd/user/db_backup.service
lrwxrwxrwx 1 myuser users 44 Jun 25 10:10 test.service -> /home/myuser/.config/systemd/user/test.service
timer-hourly.timer:
[Unit]
Description=Hourly Timer
[Timer]
OnBootSec=5min
OnCalendar=hourly
Unit=timer-hourly.target
[Install]
WantedBy=basic.target
timer-hourly.target:
[Unit]
Description=Hourly Timer Target
StopWhenUnneeded=yes
test.service:
[Unit]
Description=Run a test (echo) job every hour
Wants=timer-hourly.timer
[Service]
Nice=19
IOSchedulingClass=2
IOSchedulingPriority=7
ExecStart=/usr/bin/python /home/myuser/test_service.py
[Install]
WantedBy=timer-hourly.target
db_backup.service:
[Unit]
Description=Backups databases
Wants=timer-hourly.timer
[Service]
Nice=19
IOSchedulingClass=2
IOSchedulingPriority=7
ExecStart=/home/myuser/source/db_backups/db_backup.sh
[Install]
WantedBy=timer-hourly.target
test_service.py is a simple python script that appends the current time to a file, to check if the service is being run by the timer. (it is after I start the timer after boot, and runs correctly every hour)
db_backup.sh is a script that dumps a database into a text file in a mercurial repository, commits the change and pushes it to backup locations.
Last edited by fede (2014-06-25 21:06:09)

Have you tried this:
systemctl --user enable timer-hourly.timer

HTTP Server Doesn't Start after install

I just completed an install of the 10.1.3.1 Oracle App Server. It indicated that the install was successful. I can see in the log the BPEL Manager deploying in the default domain, but I do not see any reference to the HTTP server. Also, when I do a *./opmnctl startall* there is no HTTP_Server~1.log created.
Is there a step I need to complete to enable the Apache server to start? I must be missing something - the Apache folder is there in the install folder.
The *./opmnctl status* reports:
Processes in Instance: AS02.ssg-st-bpel-build0-dev.vzbi.com
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group          | OC4J:home          |   18970 | Alive
ASG                              | ASG                |     N/A | DownI found the following in the installActions log:
Install type for "Oracle HTTP Server 10.1.3.0.0 " is "Typical".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j.oem 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.soap.srv 2.2.0.0.2a.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ejb 9.0.1.0.1.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ojsp 10.1.2.0.0.
     Conflict while setting install type of "Oracle Process Management Notification 10.1.3.1.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.dcm 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.sysman.emd 10.0.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.java.j2ee.iascfg 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.logloader 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.webdb.monitor 10.1.2.0.0.
What am I missing? Is there a package I need to install before installing the App Server?
Edited by: BCurtis on Sep 24, 2010 3:22 PM
Edited by: BCurtis on Sep 24, 2010 3:25 PM

I now know I'm missing the <ias-component id="HTTP_Server"> in the opmn.xml file. The following is from an older install of a few years ago.
         <ias-component id="HTTP_Server">
            <process-type id="HTTP_Server" module-id="OHS">
               <module-data>
                  <category id="start-parameters">
                     <data id="start-mode" value="ssl-enabled"/>
                  </category>
               </module-data>
               <process-set id="HTTP_Server" numprocs="1"/>
            </process-type>
         </ias-component>This explains why the startall doesn't start the HTTP Server, but why would the install not include the HTTP Server in the configuration?

Startup application doesn't start on cRIO (work fine on the target with LV RT)

Hello!
I have a application (running on a cRIO-9075) that is communicating with a GPS via RS-323 (using NI-9870).
I can run the code without problems with LabVIEW RT on the target but when I build the executable and setting it up to run at startup it doesn't run.
If I remove the GPS code, the startup application will run fine. As soon as I put back the GPS code, it will not... I see that looking at a Heartbeat shared variable (no heartbeat when the GPS code is there). Also, the startup application will not run if the GPS code is there even if that code is disabled...
I have attached a screenshot of the code and one of the software installed on the cRIO for more clarity.
I'm using LabVIEW 2011.
Thanks in advance!
Vincent
Attachments:
GPS Code.PNG ‏10 KB
Software on cRIO.PNG ‏22 KB

Hello,
Sorry for the late response.
I was able to make the application work for some time and for an unknown reason, it's not starting anymore. I made a change in the code and the problem is now back.
The code still work as expected when launched using LabVIEW (arrow button).
The output from the console is attached to this message, everything seems fine to me but maybe I'm missing something.
I've looked at my code and I can't find any unreachable code (case structure or disable structure).
I don't know if it might be related but I'm also getting the famous 1502 error (cannot save bad VI without block diagram) so I have to enable debugging to be able to build my application (which doesn't start afterwards).
Any ideas?
Thanks
Vincent
Attachments:
App_NOT_Starting_Correctly.txt ‏3 KB

Postfix-3.0.0-3 doesn't start

After upgrade, postfix-3.0.0-3 doesn't start.
output of journalctl -xe:
Mär 26 22:58:27 arch64-d.xxx.de systemd[1]: Starting Postfix Mail Transport Agent...
-- Subject: Unit postfix.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Unit postfix.service has begun starting up.
Mär 26 22:58:27 arch64-d.xxx.de postfix[1952]: Postfix is running with backwards-compatible default settings
Mär 26 22:58:27 arch64-d.xxx.de postfix[1952]: See http://www.postfix.org/COMPATIBILITY_README.html for details
Mär 26 22:58:27 arch64-d.xxx.de postfix[1952]: To disable backwards compatibility use "postconf compatibility_level=2"
Mär 26 22:58:27 arch64-d.xxx.de postfix[1952]: fatal: /usr/lib/postfix/postfix-script: No such file or directory
Yes, the file is missing.
Anyone else with this issue?
I filed a bug report:
https://bugs.archlinux.org/task/44360
Downgrading helps.
Last edited by Dieter (2015-03-26 22:15:01)

I am getting the same thing, seems the update moved /usr/lib/postfix/postfix-script to usr/lib/postfix/bin/postfix-script
Downgrading fixes it, but its not a "fix"
https://bugs.archlinux.org/task/44354 is the bug report but its closed, "works for me" is the reason.
As the comment states we need to update our config files.
Since there is a new config file, makes sense, and as usual for me I requested repoen like an idiot. Sigh.
update your main.cf in /etc/postfix/ there will be a pacnew.
What you want to do is change daemon_directory from usr/lib/postfix to usr/lib/postfix/bin this will fix it.
Last edited by Toje (2015-03-27 02:23:08)

Photoshop Elements 13 doesn't start after Update to Win8.1 (MSVCR110.dll is missig)

Hello everybody
I installed the Update from Win8 to Win8.1
Now Photoshop Elements 13 doesn't start.
The mistake/error: "The program doesn't start, because MSVCR110.dll is missing. Re install the program."
So I re installed Photoshop but the mistake is still there.
What can I do?
LG Simon

Try steps mentioned on blog: http://psekb.blogspot.in/2013/04/pse-editor-is-not-launching-windows.html
Please let me know if that doesn't resolves the issue.
~Andromeda

Config Tool doesn't start from the application list

Hi all,
I have installed Planning, EAS, and Workforce on a server but when I go to configure the tools, the config tool doesn't start from the page where you select the applications to configure. Instead, it starts with all the apps listed with the message: "You have selected the above apps to configure" and it has a Back button but it doesn't work, and it has a Next button and when I press it, it says Done.
I need to configure the database and deploy to the application server.
The Shared services is on a different server and is up and running. Essbase is on a separate server and that's up and running.
I am working with 11.1.1.3 32 bit applications on a 64 bit Windows OS.
If you have run into this, please let me know what am I missing?
Thanks

Hi
First of all I couldnt get your problem as in your query description you have written "sometimes the video doesn't skips a couple of seconds from the beginning even though the value of NetStream.time property is 0" which is contradictory with the query title "Video doesn't start from the beginning".
But anyways I think you should check ns.time in Play.Start there you should get always 0 but in Buffer.Full there may be the case that ns.time is not 0 but has some value but that value is very small less than 1.
If still you have issue please clarify your problem then probably I will be able to answer your query.
Regards,
Amit

Delete ASM disk - database doesn't start

Hi
For testing purpose, I have installed grid infrastructure for standalone server and database 11g on linux. Instead psyhical disks, I have several partitions for data as ASM in normal redundancy. I try simulate disk fail (ASM should load balance and still work). When in Enterprise Manager Database Control I mark disk as offline, it works. But when I delete partition by fdisk, database doesn't start (I change disk repair time to 0.0). I try:
oracleasm deletedisk ASMDISK02,
but it doesn't help.
I can't even startup database in nomount, I get error:
[oracle@localhost ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu May 12 11:07:47 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup nomount
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/orcl/spfileorcl.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/orcl/spfileorcl.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
SQL>
When I try startup ASM instance, I get errror:
SQL> startup
ORA-03113: end-of-file on communication channel
SQL> startup
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
Why I get errors, and how I could solve this problem?
Thanks awfully for help.
Regards

Hi,
when your ASM instance/DB is down, when you delete a disk, then the diskgroup has to be mounted with the "force" option.
Now to be able to start ASM, he needs an spfile (or a local init.ora). Unfortunately your spfile is in the diskgroup he cannot mount at the moment (because disks are missing).
Start ASM with a local init.ora:
sqlplus / as sysasm
startup pfile=path_to_your_asm_init.ora
Then mount the diskgroup with force:
alter diskgroup <dg> mount force
After this drop the disk/repair the error.
Then you can restart the stack.
Regards
Sebastian

FinalCut 703 doesn't start - missing a "quartz extreme system"

Similar Messages

Maybe you are looking for