Finalize changes from 1080p to 720 after approx 1 hour

Hi, cannot find this in forum;
When finalizing it changes from 1080p to 720p after approx 1 hour. I have tried it twice. Does anyone else have this problem or know why.
Using IMovie 9 (11) all clips are 1080.

As AppleMan says, Finalize renders your movie in every available size.
If you only want one particular size then instead use Share > Export Movie.. and choose your size there.
Z.

Similar Messages

  • HELP MY MAC BOOK PRO has a problem. FROM A FEW DAYS AFTER A FEW HOURS .. PART ONE FAN AS HE HAD SUPERHEATED PC! is NORMAL?? do??

    HELP MY MAC BOOK PRO has a problem.
    FROM A FEW DAYS AFTER A FEW HOURS .. PART ONE FAN AS HE HAD SUPERHEATED PC! is NORMAL?? do??

    Firstly, you aren't in MacBook Pro forum.
    MacBook Pro
    http://www.apple.com/support/macbookpro/
    CAPS isn't really of any help reading or getting help.
    Try monitoring the temperature so you know for sure. Yes it can run hot.
    http://www.bresink.de/osx/TemperatureMonitor.html
    You may want to boot from your original OS X DVD - hold D on statup - and that way run Apple Hardware Test

  • International changes from British to US after system sleep

    Hi,
    The International menu flag chages from British to US after my system has been asleep. Any ideas as to how I may be able to stop this from happening?
    Thanks,
    Andyli

    Welcome to Discussions Andyli-
    Have you looked at System Prefs>International>Formats and made sure that you have the UK selected as your region? Also, make sure under Input Menu you have British checked, and not US.
    You may need to restart to make sure the settings hold,
    please post back and let us know how you made out,
    Miriam

  • Why does the light on my battery charger change from green to orange after a few seconds?

    Why does the light on my battery charger cable change from green to orange?  The battery continues to accept a charge when light turns orange.

    Green = not charging.
    Orange = charging.
    Note that if your laptop is pulling enough power (using CPU and GPU heavily) the light will turn green because the power adapter cannot provide enough power to charge your batteries in addition to keeping the system going.
    In fact, you can drain your batteries even with the adapter plugged in with the 17 inch Macbook Pro if you push it hard enough, although I have not noticed this problem with my Retina Macbook Pro.

  • Partition changed from 2 to 1 after downgrade to XP

    Hi, I have a question about the changing of the partition after switching to XP. I got my T61 today (finally!) which is very exciting. I got it with Vista Business just because I want to be able to downgrade it to XP to use many softwares that are not supported by Vista. After I finished downgrading to XP, I realized that the system has automatically changed the original 2 partitions (C and D drive) to only 1 (C drive). I really hope to change it back to two partitions for computer safety purpose. I know there probably isn't a way to do it unless I re-format the entire harddrive and start from beginning. My concern is since I don't really have the real XP disc, but the recovery disc from Lenovo, is it safe to format the hard drive? Is there a safe way to reboot from the recovery disc while in the process I can re-partition the harddrive, so I won't damage the "hidden partition" and the recovery function? I haven't upload anything else on the computer yet so I have no file or program to lose.
    Also, my hard drive (100G) kind of "shrank" to 86G after the downgrade. Some other posts have talked about the hidden disc and the different calculation method of the hard drive. I guess this is why the hard drive shrank?
    Thanks in advance. Any information will be really appreciated.

    I would go get something like partedmagic and use it to resize the C:\ partition and create a new D:\ partition. It is similar in use to Partition Magic but free.
    By any chance did you make a set of recovery discs for Vista in case you want to go back someday?
    T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
    T400 2765-T7U Windows 7
    Registered Linux User #160145
    FYI: I am not employed by Lenovo

  • Large_pool value changed from 0 to 8388608 after Oracle Patch 10g Release 2

    10g Release 2 (10.2.0.4) Patch Set 3 for HP-UX Itanium
    Recently we upgrade Oracle software with patch set 6810189.
    and upgraded database using dbua.
    earlier we set large_pool to 0 and after database upgrade, this large_pool changed to 8388608 bytes. Is this normal with DBUA?
    also dbua keeps backup of spfile in same location

    This is a way I used to do it too. I am not sure whether it is the official way, but it works nevertheless.
    Do make sure you run autoconfig afterwards, which will create a new environment file for you. Then stop listener and database, source the new environment file and restart listener and database.
    I found some other procedure in order for you to recreate the environment file:
    1. On the application tier, Execute $AD_TOP/bin/admkappsutil.pl to generate appsutil.zip for the database tier.
    2. Copy this appsutil.zip to the database tier and unzip it into the ORACLE_HOME
    3. Set the following environment variables:
    ORACLE_HOME =<10g ORACLE_HOME>
    LD_LIBRARY_PATH = <10g ORACLE_HOME/lib, 10g ORACLE_HOME/ctx/lib>
    ORACLE_SID = instance name running on this database node.
    PATH= $PATH:$ORACLE_HOME/bin;
    TNS_ADMIN = $ORACLE_HOME/network/admin/<context_name> 4. Edit the $ORACLE_HOME/network/admin/tnsnames.ora file. Change the aliases for SID=<new RAC instance name>
    5. Modify the listener.ora. Change the instance name and Oracle Home to match environment
    6. Start the listener.
    7. From the 10g ORACLE_HOME/appsutil/bin directory, create an instance-specific XML context file by executing the command:
    adbldxml.pl tier=db appsuser=<APPSuser> appspasswd=<APPSpwd>8. De-register the current configuration using the command:
    perl $ORACLE_HOME/appsutil/bin/adgentns.pl appspass=apps contextfile=$CONTEXT_FILE -removeserver9. Rename $ORACLE_HOME/dbs/init<rac instance>.ora , to a new name (i.e. init<rac instance>.ora.old in order to allow AutoConfig to regenerate the file using the RAC specific parameters.
    10. From the 10g ORACLE_HOME/appsutil/bin directory, execute AutoConfig on the database tier by running the adconfig.pl script.
    Now you should have the officially created environment file.
    HTH.
    Arnoud Roth

  • Can we change from ARCH to LGWR after Dataguard is life ?

    Hi all,
    After the dataguard is setup and running, can we change the log transmission method from ARCH to LGWR, without reinstalling the whole thing ?
    Thank you,
    xtanto

    Hi,
    Ya it can be done. But in which mode are u running.
    For max protection it should be LGWR SYNC AFFRIM should be there.
    If you're going to be in Max Availability or Max Perfromance you can change it at any time. Just change in parameter file and restart the database or just execute "ALTER SYSTEM" command to change it.
    Regards,
    Vijayaraghavan K

  • HTML Report Viewer width changes from percent to pixel after postback

    Post Author: MikeDymond
    CA Forum: General
    Because of the page layout that the report needs to fit into I need to have the ReportViewer width set to 100% (that is 100% of a table cell, embedded within a complex web page). When you first view the page it looks fine, the ReportViewer is correctly set to 100% and fill the space it should. When you then hit the next page button it causes the page to refresh but this time the ReportViewer width is not set correctly. Looking at the code I can see that the relevant line in the HTML is:        <div id="cridcontainerCrystalReportsViewer" style="width: 100%; height: 712px; position:relative">and is correct when you first load the page. However after the Postback it is changed to:        <div id="cridcontainerCrystalReportsViewer" style="width: 100px; height: 408px; position:relative">and hence the page does not display as it should.Even if I force that value to be set in code every time the page is shown it still does not work if it is set to a percentage. If I force it to be set to 500 pixels it works as expected and the viewer is set to 500 pixels wide both before and after the postback.        <div id="cridcontainerCrystalReportsViewer" style="width: 500px; height: 408px; position:relative"> However that is not what I need to make the page look as it should. Anyone got any ideas? Is this a bug in the Viewer?Cheers Mike

    You talking here only about textboxes, what about the other controls in your form(dropdownlists, checboxes....)? How you will be validating the data on these forms? What if you want to implement server side functionality behind?. I'm asking these question
    just to see if you planned well for your idea. I guess you're going into this because you want to runaway of generating many forms via asp.net, is this correct?.
    Another options can be:
    Create forms that are generated on runtime based on your datasource, I've done this before but there was a specific DB design for that. Here you can read your DB and based on you can create the different types of asp.net controls, in addition to calling
    sever side controls and validation.
    The second option is to have a look at the InfoPath product, its mainly used for Sharepoint but not sure for asp.net.
    Fouad Roumieh

  • Sound Output changes from headphones to HDMI after waking from sleep

    My late 2013 Retina MBP has had this issue since I purchased it last year, but I'm hoping there's a solution.
    When I'm working at my desk, I have an external monitor connected via HDMI (and a 2nd via Thunderbolt). The Monitor connected via HDMI has (crappy) speakers. Even though I have headphones plugged in, when I wake the machine from sleep, the audio device will revert to HDMI.
    Any ideas how to prevent this?
    Thanks

    Others here are also suffering from similar problems after the last update.
    see > loss of sound after waking up from sleep: Apple Support Communities
    and > TS4113 Mac mini looses audio output...: Apple Support Communities
    For some installing the > OS X Mountain Lion Update v10.8.5 (Combo) over the top of the current 10.8.5 version solved the problem.
    It might also help to report the problem to > Apple - Mac OS X - Feedback
    and/or > Apple - Mac mini - Feedback

  • Weather icon changed from 23 to 73 after restore

    Is this a way of apple knowing which customers have restored thier phones if they send them back?
    Or what's the point?

    Mine has always said 73. Sounds like maybe your weather icon was just showing Celsius before and is now showing Fahrenheit.

  • Premiere CS6 Assets in bins disappears after approx 2 hours editing

    I am having a reoccurring problem with CS6 Premiere -- after working on the project for about 2 hours, all of a sudden the bins are empty.  None of the assets I have imported appear in the bins -- very disconcerting!  I save the project, shut down Premiere and then reopen and it is all there, all bins come in loaded with assets.  This really slows down my work flow and appears to be happening more often.  The bins still appear but there is nothing in them -- the project still plays so the media is there somewhere -- I just can't access it.  I have tried importing new media when this happens and it doesn't import.  Has anyone had this problem?  Do you think it is a Windows problem?  Am using most current Windows OS 8.  Thank you in advance for any advice you might have!  Jennifer

    I will take a screen shot next time it happens -- I realize it is a strange thing and doesn't seem likely -- but it is really happening.  Imagine the project bins all lined up where they belong - with the arrows to open the bins, but when you open the bins there is nothing there -- so the bin is there with the arrow in the dropped position, but the next bin is located under it, with nothing in it -- etc.  All the bins are there, but no media is in the bin.  I am working on a documentary and have been editing for several months after shooting for 1 year -- this just started happening in the past month.  I have edited and imported plenty before this started happening --
    I am editing on a timeline -- I have many sequences in the project.  When the bins appear empty, the sequence in the timeline will still play-- I know, this is really a strange thing -- I really wish it would stop happening...very frustrating...thank you for trying to help!

  • Ff6.0.2: New Instance of Awesome Bar's default search changing from Google.

    The default search engine for my Awesome Bar changed from Google to Yahoo after today's update to 6.0.2.
    This issue is similar to http://bit.ly/pRq0SM - but like I said, I'm on v6.
    I'm unable to change this back to Google (or ''from'' anything other than Yahoo), even after disabling all add-ons, checking settings in about:config, and completely removing Yahoo from my search-engine options.
    For anyone interested in replying, '''''please note''''' that I'm talking about the ''Awesome Bar'' - ''not'' the Search Bar. The Awesome Bar isn't so awesome if I still have to rely on the Search Bar.
    Thanks! :-)

    Oh, thanks! You've made my day.
    IMHO the better solution would be to add some configuration option for the address bar search engine in browser configuration wizard. This new "feature" makes search bar useless, as for me.

  • Watching Apple TV from I pad,iPad shuts down after approx 7 minutes and I have to restart. Can I stop this

    When trying to watch Apple TV from my iPad,film or sport, after approx 7 minutes the iPad shuts down and I have to reconnect. How can I stop this happening

    it's your network that is not stable
    I would troubleshoot the general network setup look if the router had the latests firmware
    if the wifi channel was the default one then I would change it as other near by wifi networks using the same channel would interfere
    if the wifi router supported it then I would switch to 5Ghz wifi as the 2.4Ghz frequency is a pretty busy frequency
    and I would place the wifi router a place where it would provide best possible cover for the devices
    and I would try to see if connecting the appletv by ethernet to the wifi router would provide a more stable setup

  • How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed and you don't know what it is now?

    How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed by the former husband and you don't know what it is now?  And you set up your own new ID and account but can NOT access the updates, from the App store for the many apps that you already have, because they require that you sign in with that former now inaccessible ID and account and password?  Call it a problem of modern times and changing relationships, if you want to be charitable.

    So I guess it will only be new apps that I download that are allowed to give me their updates while 13 updates wait for me on an ID I can no longer access.
    Yes...  sorry.
    In the future, if need be, you can re download your purchases for free  >  Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Good rule of thumb is to back up your purchases regardless  >  Mac App Store: Backing up your app purchases

  • I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple su

    I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple support and have tried different options with the same result. I cannot download a new Version because in my Purchased List the applicaiton (FaceTime) is still there, and because I have halted it it tells me to resume. I can’t, because the same thing is going to happen. I have tried all the various troubleshooting tips supplied by my ISP and also Apple Support with no luck. I am currently working on a IMac OS 10.6.7. Has anybody got any ideas? Any suggestion would help. Thanks

    Amol Soni wrote:
    As I said, I tried everything what the manual says, but hard luck. I have taken an appointment for today, lets see what happens.
    Also there is no activity on unit when I use the remote. The unit is stuck on the first page itself where we have to choose the language. The unit seems to be fine to me but the real problem is remote does'nt have activity. The IR is not responding while pressing any of the button.
    Good luck with your appointment.
    Not much consolation but even new products can have issues and might need a trip to a store to return/replace.
    The reason i asked about the LED on the AppleTV is that occasionally it thinks it's paired with a specific remote and ignores others - the unpair keypress I described is quick and free.
    AC

Maybe you are looking for