Finally 1.9 BIOS for KT4V-L Released!

Use LiveUpdate!
Question for those who have flashed...
My CPU temp is now 50 C IDLE and 58 LOAD. Is this a fix in the BIOS? Was it giving wrong readings before?
I like having a 6 degree C drop!

Two more links:
Where is Bios 1.9 for KT4V
http://www.msi.com.tw/program/service/forum/index.php?threadid=24442&boardid=13&sid=d15829882839cb50b660cba0631dcd56
Easy question for the MODS
http://www.msi.com.tw/program/service/forum/index.php?threadid=25471&boardid=13&sid=d15829882839cb50b660cba0631dcd56
Patience.....

Similar Messages

Where is 1.9 bios for KT4V ?

Should be available whats up ? ?(

Two more links:
Where is Bios 1.9 for KT4V
http://www.msi.com.tw/program/service/forum/index.php?threadid=24442&boardid=13&sid=d15829882839cb50b660cba0631dcd56
Easy question for the MODS
http://www.msi.com.tw/program/service/forum/index.php?threadid=25471&boardid=13&sid=d15829882839cb50b660cba0631dcd56
Patience.....

7.5 and 5.5 BIOS for K7N2 DELTA released

Just enter this link:
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=436

Extended test ended up going back to 193x11.5 (2222)
Crashed in looping of demo 3Dmark2001SE after 45 mins.
Noticed my Nostromo game pad not being reconized , lights stayed on(not good)USB
Backed up fsb a couple notches to stable again. All is good
passing all extended test.
gained 1 fsb from 192 to 193. I'll still take it.
keeping low Volts
CPU 1.7
Dram 2.6
Aggressive memory timings 2-2-2-6
Sis Sandra still showing above stock 3200 400fsb speeds in benches
Memory Bandwidth 2913
2733
Arithmetic 8125
Temps:
System 33C
CPU 36C
Power 35C ( all after benching)

When is going to be released official new bios for k9a platinum

Hi,
as I write in topic, when is going to be released new bios for k9a platinum?
thanks

That is a Kuma CPU and as such it is not and probably will not be supprted on your older MB.
Here is a list of MBs that support 7550 Kuma, 7750 it appears like is too new to be on any MSI MB CPU support list yet however it it should be supported on them as well.
K9A2 CF, K9AGM3-F, K9A2 Neo-F
K9N2GM-F V2, K9N2 SLI Platinum / K9N2 Zilent, K9N2G Neo
K9A2GM V3, KA790GX, KA780G-M
KA790GX-M, KA780GM-M, KA780GM
K9A Platinum >> CPU support << list

What do you think about BIOS 1.8 for KT4V

What do you think about BIOS 1.8 for KT4V?
Is this version really better?
CRC error- still be occured?

Hi
This bios is catastrophic(k).I flashed bios and boot to win 98 and no one of my programs wont too work.Every time I try to start anything there is a note "this program performed illigal op...".So I re-installed win but problem remains.Now I'm back on bios 1.7.

When will a new BIOS for K7N2G-LISR be released

Anyone have any idea when a new BIOS for the K7N2G-LISR will be released or if a new beta bios is available :D

I have a BIOS bug for MSI.
I can't disable the tv-out function. Therefore I can't watch any DVD's. I have to take out my G3 to enable me to adjust the onboard GFX settings and there is no option to disable tv-out as described in the manual.
I have emailed MSI and their tech support are either extremely busy or completely useless like their software.
This is completely driving me up the fecking wall!!!
I love MSI hardware but I have to avoid any MSI software like the plague... unfortunately the BIOS is unavoidable.
MSI, please sort this or I will be forced to return my hardware and look for another brand. I'm considering ABIT so be warned.
Could we draw up a list of bugs to give to MSI so we can try and get them sorted?
Sorry for the ranting, but theres not much I can do. :(
L8rz

How to flash bios for aspire 5745 when you have a black screen

I attempted to update my bios for my Acer Aspire 5745 notebook and chose the wrong file. The computer is giving me a black screen now. When I push the start button the lights come on the fan blows and thats all. I found a few sits on line giving me the procedure to flash an aspire one system. Here is the steps I took to do so to no avail. 1. When to the acer site and put the SNID number to my laptop to pull up my suggested downloads for my system. 2. I downloaded the file to my working computer. 3. I extracted the file and opened the file that said DOS. 4. I renamed the file zg5ia32.fd 5. checked my flash drive to make sure it is set to ( FAT ). 6. Transfered the file to the flash drive. 7. Pluged in the flash drive to my dead laptop while it was pluged into a powersorce. 8. Held down the FN and ESC buttons while pushing the power buttons. 9. Released the FN and ESC buttons when I noticed the power light blinking and the flash drive light up. 10. Waited for over 15 min. but had no success. If anyone could tell me what I may have done wrong I would be much appriciated. I also opened up the backside to the laptop and removed the little battery that was plugged it with a small white connector assuming it was the cmos battery but still nothing happended.

I was never able to properly flash my bios. I had wondered if when I tried to update it I may have destroyed my bios in the process. Anyways I had purchased a motherboard for I think around 50.00 on ebay. It was used but was complete. All I had to do was take out the old motherboard and replace with the other one. It all came on after that with a new knowledge of not fix something that is not broken.

New Bios for K7T266 Pro2-RU

Hi All,
Are there any new bios' for the K7T266 PRO2-RU (i.e., above 3.7), that will support the AMD 2200+, 2400+ Processors once the Modification is done?
Thanks.
Craig

Hi,
The K7T266pro2 (MS-6380 V2.0) needs the modification to support all the latest 266FSB (TBred) CPU's because there is a timing change, removing the capicitor solves this and allows you to get the CPU starting.
MSI's official statement is that they don't support this as the board is long out of production.
However, they where nice enough to give us the modification in order to give you the posibility to get it running.
They're plan was to stop releasing BIOS'ses at v3.60 because there was no need to release another.
I convinced them to release 3.70 that has updated CPU-ID code for all 266FSB CPU's, and no again, they still don't support any CPU over the fastest Palomino officialy.
What they did was giving us the posibility to use an outdated board a bit longer, be happy about that.
As for the testing of CPU's on this board, that stopped at BIOS 3.50...
Any given board will fade away at some point in time, thanks to MSI (unofficialy), the K7T266pro2 with the modification can be used a bit longer......
All you need for the right multiplier is leave it at auto....as the correct one is hardcoded on the CPU itself...

Oracle select for update: not releasing lock

My JDBC code uses "select for update" to modify record in Oracle database. I tried to simulate network connection down situation.
After my JDBC code locked on a record using "select for update", I unplugged the network cable. I then tried to run the same code on another computer, but it could not accquire the lock, because the previous lock was not released. I tried sqlplus to lock the record, but failed also. The lock has been there for at least an hour now. I guess it may finally be released, but is there a way for oracle to release the lock as soon as the connection is down? Not know if it is a JDBC setting or oracle setting.

Dear Friend,
What you are trying to do is not correct way of checking the concurrency and transaction.
The reason is as listed below.
01.Always remember http is a stateless protocol and removing the connection or just closing the browser will never be informed to the database or to the application server thus the transaction monitor (TM)or processor will never release the lock as it will deem that the actor is manipulating the data.
02.As per locking goes every database is having a �TM� and the default isolation level setting is different like oracle uses serializable DB2udb 7.0 or db2/As400 uses repeatable read. You can change this setting by editing the default setting in the database but be very sure before touching it.
03. You can also transpose this with your Application server setting for that piece of code or Globally but again be very sure about it as it will change the entire gamete.
04. For releasing lock you have to manually do it or you can change the settings of App server or the Database to release the connection after some wait time.
Regards,
Ruchir

Old(er) BIOS for MSI GTX 580 Twin Frozr II/OC ?

Does anyone know where to obtain older BIOSes for my videocard (see subject)? It seems I made the mistake of not backing up the old one when I flashed to the new official BIOS that was released by MSI (https://forum-en.msi.com/faq/article/msi-nvidia-graphics-cards-from-570-580-series-read-here).
The problem with this updated BIOS is that although it does increase the default voltage a bit, making it more (but not entirely) stable in certain games, it also causes instability during boot when the card is in VESA mode - I get to see funky pixels, sometimes BSODs when booting Windows. Once it is booted and the login screen appears, the pixel artifacts are gone and I can play games for hours - it's just during boot where the card seems to be flaky.
Considering that I can just increase the voltage for better stability using Afterburner, I'd like to try and flashing the original BIOS for my card that I had on it originally which I believe was version 70.10.20.00.01 - I guess I can't be a 100% sure that these problems are caused by the updated BIOS, but all I know is that none of the problems described above were present with this older version and they appeared immediately after flashing the update

Quote from: aphax on 02-June-12, 02:21:58
This is the currently flashed VBIOS (retreived via GPU-Z) that fixed the booting issue: http://dump.aphax.nl/files/580gtx/GF110.rom
Ok, this is latest bios version for your board

Hyper-V enabled BIOS for DKA790GX / KA790GX / K9A2 / K9A2CF / KA780G

Hi guy's,
Well good news, I received a bunch of BIOS'ses from MSI that have Hyper-V enabled.
The BIOS are released here as Hyper-V doesn't work for every CPU even if it does have it.
If it works it work, if it doesn't you are out of luck.
The BIOS is attached and we STRONLY recommend you >>Use the MSI HQ Forum USB flasher<<!!
Have fun with them, but beware, they are for use at your own risk!! Nor do we know if they will have new versions in the future.
BIOS for DKA790GX and DKA790GX Platinum below:

Thanks all sorted now works a treat
Cheers
Evildoc

Availability of 3.11 BIOS for T400?

I am wondering if someone can tell me when the 3.11 BIOS for the T400 laptops will be available for download. On the BIOS download page, that latest version available is 3.10. However if I go HERE, I see the summary of changes for the 3.11 BIOS.
I really need this BIOS as it appears to allow 1600x900 resolution on external monitors.
Any help is appreciated.

The 3.0.8 release is still going through QA and integration testing with the rest of iAS Release 1.0.2.1. When it's ready, it will be posted on OTN for download, and also be available through other channels (Metalink, etc.). We expect that to be soon.
Regards,
Jerry
null

Windows 10 and Drivers/BIOS for HP Pavilion DV6 7112HE Entertainment Notebook

Hello, I recently updated to Windows 10. I wanted to know if HP is working with Intel on releasing new drivers? Also, how about a Windows 10 BIOS update for my laptop? I do not have the option to revert back to my previous OS, it would be nice if anyone can shed light on this issue.

PeerOne wrote:
jpnyc wrote:
Hello, I recently updated to Windows 10. I wanted to know if HP is working with Intel on releasing new drivers? Also, how about a Windows 10 BIOS update for my laptop? I do not have the option to revert back to my previous OS, it would be nice if anyone can shed light on this issue.  In this case iNtel will release the driver themselves since the last driver update on HP driver site. That is where you will find a updated driver from the hardware manfacture site not from HP at this point in time. UE wrote:
Updated HP Pavilio DV6 yesterday to Windows 10 and Wireless stopped working. F12 button stuck to orange and cannot turn on Wireless. My laptop has Intel Centrino Wireless-N 1030 adapter and there is no new Windows 10 driver software available. Still searching for the solution...This is part of the problem with upgrading to Windows 10 some of your hardware will be compatible and some of it will not be. What you need to do is install the last Windows drivers again into Windows 10 and if it works you will know. I am aware that drivers for Intel are released through Intel, and pushed through Windows Update. However, the issue at hand is also the BIOS which has nothing to do with Intel, hence the topic title. Thanks for your response.

Updated BIOS for T550

Hi, I just found out that lenovo has released a new and updated bios for T550 and W550s. Do you think it is worth the update or should i leave this behind? I am curious about the windows 10 support and the improved graphics performance as we have a slight hiccups on graphics on this machine. http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t550/downloads/ds102339 Thanks! Version 1.09
UEFI: 1.09 / ECP: 1.06[Important] Added support for Microsoft Windows 10 64bit.[Important] Fixed a security vulnerability.(New) Supported F1-F12 as Primary Function in BIOS Setup menu.(New) Supported Fn Stick Key in BIOS Setup menu.(Note) Please use the following utilities level for above two functions.Lenovo Base Utility : v.5.60.0000 or laterLenovo Power Management Driver : v.1.67.10.07 or later(New) Updated the CPU microcode.(New) Updated Computrace module to 945_VN.(New) Improved the graphics performance.(New) Supported the 60Hz refresh rate of 4K (3840 x 2160) resolution monitor.(Note) Please reinstall Intel HD Graphics Driver to take effect.

If you don't need any of the described features, then you can probably sit this one out.
Not sure what the security vulnerability fixes though.

Looking for Bios for MSI 945P Platinum (MS-7176) Version 1.00

Since the msi site doesn´t let me download the original bios of my motherboard, I was wondering if anyone knew how to download the original bios for this motherboard, or should I just make a backup of my current bios and that´s it?

Quote
because my computer reports that it has version 6 since the last update last year
There is no such thing as "version 6" for your board. Whatever info your looking at that tells you something about "version 6" has most likely nothing to do with your actual BIOS Version. Version 6 probably indicates the AWARD BIOS Code Base used for the BIOS (and if that is the case, it will be version 6 for all BIOS Releases for your board).
On the Post Screen, look for the string "W7176IMS Vx.y". The numbers that you will see in the place of X and Y indicate your current BIOS Version.
Quote
And suddenly it started acting weird lately.
A BIOS does not suddenly become faulty and start acting weird. If whatever problems you have started to occur only recently and not right after the BIOS Update, these are most probably not BIOS issues. I strongly suggest to leave the BIOS alone for now (well, find out which version you currently have) and explain the weirdnesses you are facing in more detail. Looks like they are caused by something else. Please also provide full system specs. Read the >>Posting Guide<< first.
Quote
And yes, the liveupdate utility just doesn´t work
Great. It should not be used for BIOS Update anyway because it tends to crash and thereby render systems useless.

Finally 1.9 BIOS for KT4V-L Released!

Similar Messages

Maybe you are looking for