Finally found a problem with FIRMWARE V12

Every time i go into my contacts and select one and press the green phone to ring someone, the screen flashes and it wont call the person. I have to go right into the contact profile and press the top left options button then press it again to call someone. Does anyone else have this problem?
Clark
Its not who i am underneath. But what i do that defines me.
You are here for a reason Superman.
"Come to me son of Jor-EL. KNEEL BEFORE ZOD"

My mistake patriciaanne3 helped me discover that its not the firmware that was the problem but some software. I put it down to the blacklist application that i no longer use. Thanks to all.
Its not who i am underneath. But what i do that defines me.
You are here for a reason Superman.
"Come to me son of Jor-EL. KNEEL BEFORE ZOD"

Similar Messages

  • Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

    Morning Friends,
    I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
    I am using Sharepoint 2013 with Office 2013 
    I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
    When attempting to open / edit doc, receive error
    "We're sorry. We can't open <document name> because we found a problem with its contents"
    Details - No error detail available.
    Any info or advice would be greatly appreciated. 
    Very high level view of what I have done:
    1 - Created content type called "Letters"
    2 - Added site columns " First Name" and "Last Name"
    3 -  Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
    4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
    5 - Created a new document library called "Letters"
    6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
    7 - Then I clicked "Add from existing content types" and added the "Letters" content type
    8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
    9 - Created a new 2010 Site workflow called "Create a Letter"
    10 - To the workflow I added the action "Create List Item"
    11 - Configured the action to create Content Type ID "Letters" in the document library "Letter" 
    12 - For the "Path and Name" I gave it a basic name of "Letter to"
    13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
    14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
    15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
    16 - Saved - published and ran the work flow.
    17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
    18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe" 
    19 - Go to open / edit the Word document and receive the following error
    thoughts? Any info or advice would be greatly appreciated. 

    See this MS support article for SP2010 workflows and generating Word docs:
    https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
    "This behavior is by design. The Create
    List Item action in the SharePoint
    2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
    I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

  • Keynote conversion:  Powerpoint found a problem with content....

    Hi all,
    MS office is killing me and I'd appreciate any pointers and comments
    Here's the situation:
    1. Keynote file (multi-revised over the years) exported to powerpoint file XYZ in New-MBP
    2. New-MBP opens XYZ and gets "found a problem with content in..."
    3. Click on "repair", open up XYZ, and get bunch of blank pages
    4. Same XYZ file copied to Old-MBP(freshly installed, now my home media server, not many apps installed).
    5. Same version of Office 2011 installed in Old-MBP, opened the file just fine!
    (so the problem is not NewMBP Keynote)
    6. Created a test account in New-MBP
    7. Attempted to open XYZ with Powerpoint
    8. Same "found a problem with content in..."
    9. Click on "repair", open up XYZ, and get bunch of blank pages
    (so the problem is not user/privileges, but the NewMBP system-wide issue?)
    10. In New MBP, created a brand new Keynote file, did some light work
    11. Exported new keynote file to powerpoint file RRR
    12. In New-MBP, RRR opened under Powerpoint 2011 just fine!
    (so the problem might be the original multi-modified Keynote file?)
    (But its powerpoint file XYZ opened in Old-MBP just fine!)
    I've uninstalled and reinstalled Office 2011, with SP1, still cannot open XYZ properly.
    I've copied all Office 2011 files from Old-MBP to New MBP, still cannot open XYZ properly.
    I"ve googled the problem and tried anything I could find, still cannot open XYZ properly. (deleting presenter notes... etc)
    My current conclusion: some kind of software system conflicts in the New-MBP.
    Anyone with any ideas?
    Thanks a lot in advance.
    Will

    Hi Will,
    Met the same issues and spent hours to find the problem. And guess what ? I found it :-)
    For some reason, groups are not supported by Powerpoint converted files.
    This is why every slide that contains group is not converted.
    The workaround is to ungroup all the groups in your keynote file (alt+cmd+shift+G) and you'll see your slides being converted again.
    I'm not sure where the issue is coming from. I would tend to think it should be resolve by the Apple Keynote team.
    Not sure whether it has been escalated so far.
    There might be some other small issues. One or two slides were not properly converted although they were not containing group, but this should fix most of them.
    Have fun degrouping your slides

  • I think I found a problem with the calculator application.

    I'm a south korean highschool student and I think I found a problem with calculator application. I use iPod touch 4th generation with iOS 5.0.1. I was playing with calculator app and I found out that 0.1!(factorial) is 0.951350769866873. This can't be right bacause factorial calculation can only be definrd whan n is natural number or 0(in n!). I want apple to correct this error.
    And if you are someone working with apple, please let me know the algorithm of factorial calculation(if possible). I would be grateful if I can have a chance to study the algorithm and find out what made 0.1! possible.
    so question.
    do anybody know how to send an email to apple? I tried but I couldn't find the address.

    Apple doesn't dialogue with users via email the way you want, but you can report such problems to them via
    http://www.apple.com/feedback/
    But in this particular case you should be aware that factorial can in fact be done for non-integers:
    http://en.wikipedia.org/wiki/Factorial#Extension_of_factorial_to_non-integer_val ues_of_argument

  • Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is

    Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is plugged into itunes. Can't even restore it. I get Error 1415?

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

  • Is there a problem with firmware 4.30.5 for the WRT54G?

    Hello experts,
    I have read in this forum that there are problems with firmware version 4.20.5 for the WRT54G.
    Is this so? And if so, where might one find the details?
    Thanks.

    There is now a new firmware update available for the AirportExtremeBase. I had a similar problem as all of you, so I hope this will fix the problem!
    Download the update here: http://www.apple.com/support/downloads/airportextremefirmwareupdate57formacosx.h tml
    PowerBook G4 - 1.67GHz   Mac OS X (10.4.4)  

  • Problem with firmware restoration CD

    I have a dead MacBook Pro (mid-2010 15" i5) that went through a failed firmware update. I found and burned the Firmware Restoration CD 1.7 that is needed to reset the firmware.
    The problem I have is with the procedure itself as described here: http://support.apple.com/kb/DL77
    7. Turn on the computer and continue holding the Power button. The sleep LED will blink rapidly, then slowly, then rapidly (3 quick blinks, 3 slow blinks, 3 quick blinks). On Macs that don't have a sleep LED, tones are used instead. Hold down the power button until you hear 3 long tones, then 3 short tones, then 3 long tones.
    8. Insert the Firmware Restoration CD while the lights are blinking or tones sounding, then release the Power button. A long tone is played once the recovery process has started.
    The MBP does not have this behaviour with the sleep LED. I hold down the power button, the sleep LED flashes rapidly for about 1-2 seconds and the I hear the boot chime and the MBP tries to boot normally from the HD. If I try to insert the CD while the light is flashing, the MBP just spits it out.
    What is the right procedure to restore the firmware with this particular MBP model? Thank you!

    The MacBook Pro 15" Mid 2010 has a model identifier "MacBookPro 6,2" and isn't listed at the link you provided, it's the wrong firmware your using.
    Here's the correct version
    http://support.apple.com/kb/DL1098

  • Problem with firmware 1.2.1

    I updated my 5th generation 80GB iPod (actually 5.5) over the weekend, and now I see some erratic behavior. For certain songs, the iPod simply stops playing the song and gets stuck at that point. I can still move around, and go to the next/previous song, so it's not a total freeze, but the iPod refuses to play the affected song.
    Has anyone else noticed this behavior? It has already happened twice, with different songs, but always the same songs, so it's not a random issue but probably a problem with the mp3 files themselves, even though they play perfectly on iTunes.
    5th generation 80GB black iPod   Windows XP Pro  

    Sorry for long post, Probably help though
    Hey, i've had problems with the new firmware (1.2). I have a 60gb which came with firmware 1.0 , when i updated it to 1.2 i noticed performance problems. When I first did it i found that switching songs was sluggish. It also, when left for awhile in pause mode when plugging back in it would freeze. Would have to turn off and back on untill start playing. I decide to talk to buddies who also have fifth gen ipods and they never heard of that. But all of them have had problems with the 1.2 update for playing videos over 1.5 hours.. When watching files over that length the ipod will reset itself. Also said it would do that while playing songs. I decided to downgrade my ipod to fimware 1.0 and seemed to improve it's performance. I think the new update has a problem with the 60gb ipod's cause i downgraded my buddies as well and his is perfect now. I just found the updater from 2005-11-17 on the internet through google. Prob why they don't have 60gb's ipods anymore. Also heard video playing problems with 30gb's too.

  • 5300: Problem with firmware upgrade

    Hi,
    I have Nokia 5300 Xpressmusic with firmware version 4.7. I have recently download Nokia Software Updater and tried to update my phone via USB cable connection. The software runs fine, it identifies my phone correctly, checks for update & tells me that V5.5 is available & downloads it successfully. The problem is that when I press the 'Upgrade' button, 1st it reboots my phone in 'Test Mode', then the 'Preparing installation' window remains on the screen for a couple of minutes & then it gives out an error saying "Connection to phone lost". I've tried reconnecting my cable but it still gives out the same error. Fortunately when I took the batteries out & reinserted & started my phone, it turned on successfully with the previous firmware version. But I still cant get it upgraded. I switched to another PC & tried it there but it still gives out the same error at the same stage. Kindly help me out with this, what is going on here?

    16-Mar-2008 09:50 AM
    omensa wrote:
    Hi,
    I have Nokia 5300 Xpressmusic with firmware version 4.7. I have recently download Nokia Software Updater and tried to update my phone via USB cable connection. The software runs fine, it identifies my phone correctly, checks for update & tells me that V5.5 is available & downloads it successfully. The problem is that when I press the 'Upgrade' button, 1st it reboots my phone in 'Test Mode', then the 'Preparing installation' window remains on the screen for a couple of minutes & then it gives out an error saying "Connection to phone lost". I've tried reconnecting my cable but it still gives out the same error. Fortunately when I took the batteries out & reinserted & started my phone, it turned on successfully with the previous firmware version. But I still cant get it upgraded. I switched to another PC & tried it there but it still gives out the same error at the same stage. Kindly help me out with this, what is going on here?
    Get it updated at Nokia care. If the phone is in warrenty they do it free for you.
    If my post has helped you please click the white star on the right

  • Reporting a problem with firmware and secondary ca...

    Hi there,
    I would like to report a problem with the 202.12.11 firmware for the Nokia E75.
    My secondary camera works fine with the normal camera application until I make a video call. The picture for the video call using the secondary camera is just white and blank.
    After making the video call, the secondary camera won't work with the default camera application. I can switch between video and image mode but all I see is my camera wallpaper.
    It's definitely not the hardware because the secondary camera will work again after reinstalling the firmware .... until I use it in a video call that is!
    I have also had no problems with video calls using the older firmware.
    Please advise and I hope you can issue a patch soon.
    http://zhi-lee.com

    I had the exact same problem.  I eventually used their "Express Lane" problem reporting, and they refunded me the cost of the episode.  (???) Um, hello, that's not what I was asking for... can I just have my episode #3 please?  Hopefully they'll get around to uploading the right show eventually, and possibly not use the Swedish Chef as an intern to manage their upload queue.  #borkborkbork

  • At last...........I found the problem with my iPod Touch

    Ever since the upgrade to IOS7 I've had a nightmare with syncing. It was taking up to 2 hours to sync and each time the available space on the ipod touch was getting less and less. I tried everything up to and including reset to factory settings and start from new and nothing made any difference, it would just sit there for hours saying "waiting to copy" .
    At last I've worked out that IOS7 seems to have a problem with Podcasts. Since I removed all podcasts from the device the syncing is back to normal - just done 4 syncs and none of them took longer than a minute.
    So if you have a problem with syncing try removing all podcasts from your device and see if it makes a difference.
    Cheers

    The padlock indicates that it is a secured network and password is required. The padlock never goes away.
    To try to connect to YOUR router:
    - Power off and then back on your router
    - Reset your iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • RV180 (wired only) problems with firmware 1.0.4.14, fails to boot correctly + LAN ports power off during boot (downgrading to 1.0.3.10 = fine again).

    Hi All,
    A few months ago when 1.0.4.14 was released I was quick to update to this version from 1.0.3.10 but very quickly ran into issues.
    Bit of background info...  I am not doing anything complex with this box, basic IP4 network over all LAN ports, no VLANs, firewall enabled and allowing 2 port access rules to a static IP address.  Any static IPs are assigned manual at host level but all other devices receive DHCP IP addresses.  I don’t host VPN on this RV180 but I do with another.  Routing VPN has no issues. WAN is connected to another switch provided by my ISP who provides DHCP IP Address with their DNS etc.  Only LAN ports 1 and 2 are connected, port 1 to my Wireless AP (AP mode passing all requests to the RV180, DHCP etc.), port 2 connects to a 8 port Smart Switch (but all 'Smart' features are currently not in use, so basic switching only).  All other settings on the RV180 are on recommended defaults.
    Everything is working fine on 1.0.3.10 but I have all kinds of issues after updating to 1.0.4.14.  Here are the actions and experiences I had...
    1) Backup my RV180 config to txt file.
    2) Navigate to the firmware upgrade page and follow steps to complete the upgrade process from 1.0.3.10 to 1.0.4.14.  *router does the normal process of upgrading*
    3) RV180 reboots to complete but doesn’t come back up even after waiting 5-10 mins.   LAN ports enable during boot up (link lights on) but after about 2mins turn off (no link lights).  WAN light is on alongside the Power Light.
    4) Power cycle even with rest... Same results.
    5) Reset the RV180 to default settings.  I can sometimes get the unit to boot up and the LAN remains active and powered up.  The web UI is VERY slow compared with 1.0.3.10.  Internet sometimes works and sometimes doesn't (I would expect it all work without issue on default settings).
    6) I repeat this a few times, various resets, powered off waiting periods, etc. but I always have issues.  I did manage to get some log file information and the Kernel appears in the Alert, Error and also the Warning logs (please see attached files).
    7) I gave up at this point.  No major issues like this reported on the internet from a few google searches etc.  So I then reset to defaults (1.0.4.14), downgrade to 1.0.3.10 and finally reset to defaults again + restore backup config settings (with some manual changes).
    The router has remained like this and seem to be working fine, but I would like any security improvements from 1.0.4.14 firmware on my device.
    Anyone able to help, have the same issue or can advise me in any other ways?
    I see 1.0.3.10 isn’t displayed as a firmware download on the standard support page for the RV180 now.  Only 1.0.2.6 and 1.0.4.14.  Do I need to downgrade again to 1.0.2.6 before upgrading to the latest version?
    Regards,
    ~FAZ~

    Hi,
    I recently bought a RV180 router and immediately I encountered the same problem; practically I am not able to access the web GUI.
    The PC is directly connected to the router, nothing else is connected; the TCP/IP configuration is as follows:
    PC: 192.168.1.100
    RV180: 192.168.1.1
    GATEWAY: 192.168.1.1
    SUBNET MASK: 255.255.255.0
    Once the router is turned on, the power LED flashes fastly, the Ethernet LED is on but after few minutes it disappears and the PC detects a disconnection of the Ethernet cable.
    The router is not pingable and, as I said, the web interface is not reachable.
    I have tried to power cycle the router, to reset it (pressing the reset button for more than 3 second and for more than one minute), to access the rescue mode and download a new firmware through TFTP, but nothing worked.
    Few times, after many boot and reset trials,I was able to access the web interface and in one of these occasions I updated the firmware to 1.0.4.14 but once the router is powered off the problem arises again at the next power on.
    I have not tried yet to downgrade to an older firmware version.
    Can you suggest any solution? thank you.

  • [Zen Micro] Problems with firmware upd

    Hello!
    Yesterday I finally received my Zen Micro and I tried to update my firmware, but it didn?t work. I downloaded the file (firmware 2.02.2) from creative.com and nomadworld, but both files didn?t work.
    This is what my computer said:
    An application is interfering with the flash-program. Close all applications and all explore windows before you continue. - Renew - Close
    What does this mean? I closed all running programs and my firewall and anti virus program. Am I doing something wrong?
    Thanks for any help!

    Well, I searched the whole forum and I found the answer I was looking for. I had to shut down CTDetect.exe in the Task Manager and it worked!
    Thank you for helping SSR, I really appreciate it!

  • Problems with Firmware 3.01

    Even since this upgrade, my appleTV must be reset in order for it to play. I always get a black screen when it is start and the appleTV has to be reset to get a picture on the TV. I restored the appleTV to factory setting (firmware version 1) and then updated, resync'ed and still have the same problem. I have not experienced this with any previous firmware version. This has been very disturbing. The only solution I found is to connect the appleTV to remote powered switch so I can power it off and on every time I need to use it. This sounds so ancient and stone age like but I hope it turns out to be my temporary fix until (a) Apple's release of the next "good" update, (b) someone on this forum has a solution that I have missed, or (c) there is a way to roll back to version 2.4. I also hope that apple consider allowing the availability of prior firmware version so one can roll back their device of things don't pan out.
    The AppleTV is connected to a Panasonic HDTV thru an HDMI via a Sony ES3200 A/V receiver. I have iTunes 9.02 installed.

    I have had this appleTV for many years, its a 40 Gb, version 1 firmware! I have not experienced any of these so called HDMI problems until upgrading to firmware 3 and it has became worse with 3.01. Furthermore, restoring the appleTV to its factory condition (FW version 1 in my case) results in a perfectly interoperable appleTV that works just fine with the equipment I have, and always had. I must therefore conclude that the problem is in the version 3.00/3.01 update and specifically in the HDMI/HDCP handshake protocol implemented by this revision. As further proof, I plugged my appleTV to an RF'd power switch (one of those you use for your Christmas tree). Under this scenario: when I turn off my AV receiver and TV I also switch off the appleTV and few second later turn it back on! The apple TV recycles and glows an amber light (because everything else if off). Subsequently, when I want to use it again, I turn on my AV receiver and TV (I use a Harmony remote) and without any further ado the apple TV amazingly initiates the handshake, the amber light now glows green and every thing is on. As I mentioned in another post this is a clunky solution and so very 20th Century to solve the 21st century 3.01 appleTV software upgrade (really) debacle. My be next update will disable HDMI all together and then I will either resort to component or to another media server. Or my be Apple will fix it or allow roll back to version 2.4 without me having to hack it. As some one commented this 3.00 update is analogous to Microsoft Windows ME, I say it is more VISTA like, some fluff and no substance.

  • Problem with firmware in a Zen Jukebox 3

    Well, I've got a mp3 player, a Creative Zen Jukebox with a HD of 30GB. The other day I started it and it began to re-built the music library, but it blocks in the middle of the process and shows a message: firmware problem. And here it sto
    ps.
    I can not access the HD because my computer doesn't recognize it, since after the "firmware problem" it stands completely block. I've tried to download the upgrade of the firmware, and it seems to have been installed, but it stills giving me the same problem... Any idea? I'm desperate.

    Can you start in Rescue Mode and do a cleanup?
    There is a sticky thread showing how to do this.
    PB

Maybe you are looking for