FINALLY getting to the end of the iCloud upload...

After a week, I am almost through about 23,000 songs (slow internet that has to reset daily). A lot of songs matched, lots were uploaded, and a few were eneligible since they belong to another apple account (and just deleted). The remaining were converted to AAC files (since they were low bit count I guess they had to be changed) and they now appeared to get uploaded or match, if not they got deleted. Have yet to try and pull music down to another device since won't do it while it is uploading. We will see how that goes.
QUESTION:
1. If a file is listed as UPLOADED, and then I changed the Metadata on my local copy (say add more band info or correct spelling), will it change the info in iCloud? Or once it is in the cloud, it is there permanently until it is deleted and uploaded.
2. When all is done, it appears I am to DELETE all the MATCHED songs in order to download the improved sound quality version (I assume the uploaded stay the same quality as uploaded so I don't need to do them). Is this correct?

Similar Messages

I clicked the download all button at the end of the list of my library iTunes which i believe is in the iCloud, i have iTunes match also, many downloads were reported as occurring over several hours and then received the warning startup dis

i clicked the download all button at the end of the list of my library iTunes which i believe is in the iCloud, i have iTunes match also, many downloads were reported as occurring over several hours and then received the warning startup disc is full (activity monitor shows 3.99 of 4 GB used) and then another stating the download had not occurred due to the disc being full. most of the tunes still appear to be in the cloud but the disc is said to be full, spent a good period of time trying to investigate what has happened but failed...I'm not well up on all of this as an old chap so any help would be wonderful.....

unclefossil wrote:
Thanks Michael, what is the best way of backing up, should buy a cheap standalone external hard drive rather than relying on the Time Capsule which is quite sensitive...
If you read the link I provided you'll get an idea of one way to maintain a backup of your music files, use Time Machine, and not take up as much room on the internal HDD/SSD.
unclefossil wrote:
i live in the Scottish Highlands where Broadband is frequently intermittent disrupting backups.
Your internet connection speed has no effect on Time Machine/Time Capsule backups. Since that is all done locally, over your wireless network you actually do not need an internet connection at all.
unclefossil wrote:
Also I wondered if I could increase the memory on the setup disk by replacing the 4GB card already in the MBP with 16GB cards, if I upgraded would that affect anything I have stored already like my iTunes?
You're asking about the computer's RAM. Increasing that will not increase the size of the internal storage available to the computer. You'd need to replace the HDD/SSD of the Mac, which, depending on what model you have may or may not be possible (with new models of Macs).

Why is there several seconds of black running time at the end of the videos I am producing in Final Cut Pro X? There is no gap or effect ant the end of the project.

At the end of some of my projects the cursor runs over the end of the project for app. 3 seconds. When rendering the project Final Cut Pro X adds app. 3 seconds of black to the video. There is no effect or gap or something else at the end of the project.

OK, wish you luck over there, seems like somebody over there should be able to help.
If you don't get help, post back here & I'll try to find somebody in the top users that can help.

Why is there several minutes of black running time at the end of the videos I am producing in Final Cut Pro 6?

Why is there several minutes of black running time at the end of the videos I am producing in Final Cut Pro 6?

OK, wish you luck over there, seems like somebody over there should be able to help.
If you don't get help, post back here & I'll try to find somebody in the top users that can help.

I have an Iad2 and ever since ios6-there are issues.I get occasional lock-ups and have to reboot. The WSJ app freezes when running their videos to the end. The only work-around is to stop the video before it's over. Worse than windows me !!!!!

My Ipad2 worked perfectly before ios6 upgrade. It now freezes occasionally and I have to reboot to get it to work. Also the WSJ app will now freeze if I try and run one of their videos that is imbedded in the article. My only work-around is to stop (press done) before the end of the video or I have to do a total reboot. The problems remind me of Windows ME . Will Apple resolve these issues or become more like Microsoft. Hopefully there will be a restore button in the future like Microsoft was forced to do because a lot of upgrades are just terrible. Am I crazy or are there other people having the same issues with ios6, or could this just be a coincidence and my ipad2 is starting to fail just when ios6 arrives ?

I know this will not help but, the bluetooth headset I purchased for my wife works great and it pairs with our car and our sound bar in the livingroom (Motorola Droid Razr) 98.72.16.XT912.Verizon.en.US
However I did not upgrade over the air but from a android web site and placed it on my external sd card. I believe this made the difference in why we had no issues and upgraded functionality has been great.
Please note when I mention these bluetooth devices I mean the Razr connects with no problems.
It also had no internet issues and none of the problems others have complained about in other threads.
unfortunately when you say thousands have these issues I cannot say that is accurate. The hope is when large numbers of owners have updated to the Jelly Bean and are complaining inmase then Motorola will issue a patch to verizon to get out to the affected users.
Of course now that Google owns Motorola Mobility and has laid off loads of workers it may never issue an os patch.

Row getting added in the end of the scroll

Hi -
I am using a scroll area on a page on level 1. The issue iam encountering is that when ever i click the plus sign to add a second or third row (assume one record already exists in scroll 1) , the row gets added in the end of the scroll and also the fields are blank. However as delievered the new row should get added on the top of the scroll meaning 1 of 2 not 2 of 2, and also it should carry forward the values from the prior row. Please any suggestion or help is greatly appreciated.

I figured it out. The reason it was happening was because, my scroll record had another key field after EFFDT and EFFSEQ, due to which the delivered copy forward logic for new rows in scroll did not work and the row was getting added in the end or after the first blank row always.

I had a problem installing icloud on windows 8.1. What should I do? At the end of the installation process there is a error message.

I had a problem installing icloud on windows 8.1. At the end of the installation process there is a error message.What should I do?

I'm guessing that you have checked and complied with the system requirements?
System Requirements
Microsoft Windows 7 or 8
Microsoft Outlook 2007 or later or an up-to-date browser (for Mail, Contacts, Calendars)
Internet Explorer 9 or later, Firefox 22 or later, or Google Chrome 28 or later (for Bookmarks)
Broadband Internet access
Note: If you are upgrading from iCloud Control Panel 1.1 or earlier, you will need to sign out of iCloud Control Panel and uninstall it before downloading iCloud Control Panel 3.1

How do i get a new tab to open up with my home page after i click on the + at the end of the tab

how do i get a new tab to open up with my home page after i click on the + at the end of the tab

problem solved thak you Andy.c that was too easy and a fast reply i'm abit of an iliterate with these things

Present final report at the end of the form.

We are working on a performance evaluation form.
There´s a part of it where we specify performance factors, the qualification is from 1 to 5. If the qualification is between 1 & 2.9, it needs a developement plan.
I would need two things, first if the value entered is between 1 % 2.9, the background color to turn red. But at the end of the form get "a report" with all the performance factors that are between that qualification rate, so the evaluator makes a plan for it.
I´m using LiveCycle Designer ES 8.2
Hope to explain enough,
Thanks in advance!

Vik,
You are on the right track with the sub-report.
1. Create your letter in a separate report.
2. Add the Letter Report to your original report as a sub report in the group footer.
3. Set the report links on the "Group By" field.
This will give you a letter record for each report record with the same grouping as the main report.
Hope this helps,
Jason

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted but then it asks for a serial number for a full version of a product which men is design premium cs3 but it doesn't give me that product as a choice from the drop down menu. it only gives me adobe master collection cs3. why when i have purchased all these different upgrades can i now not use them and how can i sort this out. i need cs5.5 on my new computer.

Contact Adobe support:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Will not boot up. Apple shows, spinning wheel shows, a bar comes up on the bottom. It gets to the end of the bar and shuts down.

Will not boot up. Apple shows, spinning wheel shows, a bar comes up on the bottom. It gets to the end of the bar and shuts down.

Will not boot up. Apple shows, spinning wheel shows, a bar comes up on the bottom. It gets to the end of the bar and shuts down.

Windows 7 on MacBookPro Lion not starting, it gets to the end of the windows logo then nothing...

I have a problem with getting Bootcamp going on my MacBookPro sometimes. It will get to the end of the winows logo start to show the bllue winows 7 pic and then nothing... I have to re-start several times with the same issue till I get the safe mode dialogue. If I then get into control panel - system and security - check for performance issues it says superfetch is not running and also asks about choosing start up programs sometimes. I can set bootcamp etc to run from the start up program dialogue to resolve that issue but it vstill brings up the super fetch issue as unresolved. Lion will start up ok but not windows. ?This issue only hapens at temporatures of 12 centigrade or lower. Any ideas?
Bootcamp 4.0
Windows 7 home premium
processor i5 - 2415M @ 2.3GHz
64 bit

you don't need or have to have superfetch
do you have an SSD?
not sure why but seems like you nailed the issue: cold temp - and disk drive is too cold or not spinning up properly
try booting from Windows DVD and perform any checks and repairs.
schedule or force it to do chkdsk on the partition next time

HT1414 I have tried to restore my IPhone 5 many times now and keep getting an unknown message error at the end of the set-up. The phone is stuck in restore mode and I am unable to use it. What do i need to do to get resolved...help!!!

Dear all,
I have had problems with the internet connection with my IPhone 5. I have tried to restore the software to see if that would make a difference.
I have tried now for at least 10 times to restore the software. The phone is locked now in restore mode, and when I get to the end of the restore to verify with the server, i get a consistent unknown error message. Sometimes is says my phone cannot be found.
The phone has the connect to Itunes on the screen and cannot be used.
I am running out of patience now....need urgent help!!
What to do?

Contact Apple support for warranty service.

Minus sign at the end of the value, Need to get Preceeding minus sign.

Hello gurus,
I am using following code in web dynpro to get data from a FM and downloading it to excel.
for the numeric values I am getting minus sign at the end of the value in excel. but If I display the value in alv, it is coming fine. Please let me know where I am going wrong.
ex: 4568-
      CALL FUNCTION 'Z_EXTRACT'
        EXPORTING
          extract   = z_extract
        TABLES
          it_data       = tab_et.
      DESCRIBE TABLE tab_et.
      IF sy-tfill GT 0.
        CLEAR: text, xtext.
        DATA :    v_fore9ldepl(17)      TYPE n.
        LOOP AT tab_et INTO rec_et.
         MOVE:
          WRITE: rec_et-fore9ldepl TO v_fore9ldepl DECIMALS 3.
          CONCATENATE text '1'
                            rec_et-z0g_cwwter
                            v_fore9ldepl
                 cl_abap_char_utilities=>newline INTO text SEPARATED BY ','.
                  cl_abap_char_utilities=>newline INTO text SEPARATED BY
                  cl_abap_char_utilities=>horizontal_tab.
        ENDLOOP.
        CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
          EXPORTING
            text   = text
          IMPORTING
            buffer = xtext.
        CLEAR: filename, wa_files.
        CONCATENATE 'EXTRACT'   '.XLS' INTO filename.
        wa_files-content = xtext.
        wa_files-filename = filename.
        APPEND wa_files TO files.
DATA izip TYPE REF TO cl_abap_zip.
DATA output_file TYPE xstring.
CREATE OBJECT izip.
LOOP AT files INTO wa_files.
    izip->add( name = wa_files-filename
                content = wa_files-content ).
ENDLOOP.
output_file = izip->save( ).
CALL METHOD cl_wd_runtime_services=>attach_file_to_response(
EXPORTING
i_filename = 'TEST.ZIP'
i_content = output_file
i_mime_type = 'ZIP/APPLICATION'
       i_in_new_window = abap_false
i_in_new_window = abap_true
i_inplace = abap_false ).

Hi,
In the Context attribute tyr to use the properties of formatting where you can have the MINUS sign in the front of the value..
If this is working fine then when you use any standard export of ALV the same (AS iS) is shown in Excel right...
Regards,
Lekha.

How do I get new tabs to open at the end of the tab bar rather than next to the tab i am working on?

Im running firefox 3.6.12 on a pretty dated computer. Im using Windows XP Home Edition SP3
On previous FireFox editions, opening new tabs from pages Im working on, used to appear at the end of the list of tabs. Now when I open it, it appears right next to me.
Is there a way of altering this setting? I often open multiple tabs from the same page by clicking a link with the mouse wheel and I like to work through them in the order I clicked them. This is usualy for comparing things like holidays, car insurance etc
thankyou

You can change a preference to make tabs open
# at the end of all open tabs
# immediately after the current tab.
See: http://kb.mozillazine.org/About:config
*Type '''about:config''' in the URL bar and press the Enter key.
*If you see the warning, accept it (promise to be careful).
*Filter = browser.tabs.insertRelatedAfterCurrent
*Look at the "Value" column ('''false'''=open at end, '''true'''=open after current tab); Value = true is the default.
*Double-click that preference to toggle the value from true to false, or false to true
*Restart Firefox (File > Restart Firefox)
See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/
 
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Windows only Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#***Choose your language
#***Download the file
#***Windows: choose the .exe version
#****NOTE: '''At this moment''', using this method, only the incremental update is available on the Adobe FTP server; download the .msp file under the "misc" folder, save it to your hard drive, exit Firefox, run the installer file and Windows Installer will install it for you.
#**'''OSX, Linux and Solaris Download link''': http://get.adobe.com/reader/otherversions/
#*Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
#* After the installation, start Firefox and check your version again.

The + sign at the end of the tabs no longer takes me to the last current tabs or websites it instead takes me to google search. How do i get it back to my last tab for the website I visited?

I used to get the last websites or my frequent websites I visited when I clicked on the + sign at the end of the tab bar.. Now all I get is a google search page.. How do i get it back to the other way it was?

A new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Do or did you have the Google Toolbar installed?
* http://www.google.com/support/toolbar/bin/answer.py?answer=115561 Web-browsing tools : Google new tab page and most visited websites

FINALLY getting to the end of the iCloud upload...

Similar Messages

Maybe you are looking for