Finally got bullets to work, and now my background images are jacked?
This has been frustrating me all freakin' day. I was having the worst time trying to get my bullets to work correctly, and finally assigned a div in my external CSS, and then they finally decided to work. But now, which I believe to be some sort of padding issue, some of my background and border images are just WAAYY off like in the attached picture.
Any help with the code would be greatly appreciated, as I am still learning, and Ive managed to take a template and make it look halfway decent (from the visual side of things - Im sure the code is a complete mess).
http://pastebin.com/Jeqkfbvb - My CSS
http://pastebin.com/bP8w0vKj - My intro page
The bottom of the intro page looks like that when it should be flush. I cant figure out what I jacked to fix it and I cant figure out why the bullet points/new div would even affect it in that way.
Halp
I figured it out through trial and error.
I had not closed some div tags and they were causing my footer to be way above where it should be.
Sorry to waste peoples time
Similar Messages
-
i just got an ihome system and had trouble with it connecting to my iPhone. I finally got it to work and now my itunes doesn't recognize my phone. My software is up to date on both my Mac and my iPhone and I have shut everything down and restarted. Does anyone have any other suggestions?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Finally got update to work, and battery usage even worse?
I had to do the restore last night to get the iPhone to work as before. I started out at 100% this morning. I've hardly used it at all, and 2 hours later it's down to 85%? That's worse than before the update. All I did so far this morning was update my LoseIt log, send 1 text message, and read a few email.
Every time Apple has released an update there are people who want to go back to a previous release or expect an update to fix the problem they see. But the real problem in almost all cases is not the release itself, but a problem with an individual's phone. I installed 3.1.3, and for the first two days my battery life has been measurably better. Also, based on the very few problem reports in the forums 3.1.3 has been very stable for an overwhelming number of users.
If you are having a problem first try some basic troubleshooting; it's your phone, not the release that is the problem. Reboot the phone, run the battery down all the way then fully recharge. And if neither of those fix it do a restore as a new phone, because the problem is most likely in an installed app or corrupted metadata. -
i hooked up mine airport and finally got it to work but every once in a while my web browser gets stuck. how di fi?
Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia -
I got windows 7 and I downloaded itunes and at first it said it was incompatible but then i got it to work. Now all of a sudden my itunes won't open. It keeps saying it is incompatible. Again??
Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?
I think that we all understood what you meant. If the extension cord is no longer working, then return it.
We are all trying to tell you that you can plug the power block into a standard household extension cord - using the short cord that came with the iPad - and there is no need for the extension cord that you bought.
Edit - one upped by the lovely lady with the pretty kitty avatar -
It is a 64 GB Iphone 5s and I am running Windows 7 x64 on all of my pcs.
I just got an iphone 5s and now it wont connect to any of my windows 7 PCs, it just gets detected as an unknown device and is unable to be detected correctly. It was connected to one windows 7 pc about a week ago and worked but now I tested it on 4 other computers including a macbook running osx and it isnt detected. I tried the whole Apple Guide and it was no help.install the latest version of itunes
-
Oil got into my ipod and now it will not work at all is it worth fixing or should i just replace it with a new one ?
Replace it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode
I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring. -
My ipod classic had an error 1439. It finally let me restore it and now it says error 1439 again and wont let me update my ipod. Why?
Hey there Palmer
How are you?
Well, I have an iPod Classic, it gave me the error -1436 error and would not restore on iTunes.
I did the following:
My Boss (@work) has a fairly old iBook but it has OS-X, so I decided to give it a try and connected my iPod to it.
The system showed a window telling me that the disk is not MAC formated and needs to be validated prior further action. Snce it is a Mac product, I thought "yeah, go ahead".
It then opens the disk manager utility for the Mac and showed the disk. It's window has some tabs, one is to verify the disk, so I verified it. Guess what, it had some invalid clusters.
Then I formatted the iPod to OS-X Plus file system (next tab to the right). After formating the iPod, I "ejected" the iPod and reconnected to my PC. The Windows iTunes found an iPod with Mac file system and asked me to restore it. As I clicked on the "restore" button, I crossed my fingers as this was the last resource I have.
Finally, after the file extraction was done, it began to restore the iPod!!
I'm so happy about being able to restore the iPod that I decided to share with all you guys this solution as it is the most usefull, in my opinion.
Hope you can find someone with an iBook or a desktop Mac, so you can fix yours.
If it works for you, make sure to share the tip!!
Kind regards
Salvador Rivera -
I have a PowerShotG6 camera that got a little damp and now won't take an image, can it be repaired?
I have a PowerShot G6 digital camera. It got a little damp and now won't take an image. Every thing else on the camer works. Can I get it fixed?
Hi,
The cost of a repair for that camera would be more than its worth.
You can try drying it out more by openeing the battery compartmen, remove the battery and button cell battery (if it has one)t and placing it in a closed container with silica gel or if your handy take some of the covers off, blow out the moisture with air let it sit and dry with silica gel and keep your fingers crossed. Look at the used ones that are for sale on the net, the G5's sell for about $35 working $50 with accessories. -
Audigy 2 ZS, Vista x64: Finally got bass redirection working!
=Audigy 2 ZS, Vista x64: Finally got bass redirection working!B Hey guys,
I have hooked a Teufel Concept G to my Audigy 2 ZS. The Speakers do not have internal cross mix, so unless the sound card provides a bass signal there will be NO bass at all. This has not been a problem under linux, since it automatically configures the sound card to send out bass, but very frustrating in Windows Vista x64. GTA4 is no fun without bass ;-)
After endless searching and messing with different drivers (breaking the whole vista sound system) I coincidently got bass redirection (and CMSS2 apparently) working today.
These are the steps I took:
. Fresh install of Windows Vista x64
2. Installation of Audigy 2 drivers provided by WindowsUpdate, did not download from Creative Labs
3. Use an old CtPanel-App which actually could activate bass redirection and CMSS2?
I uploaded the App:?
http://www.megaupload.com/?d=L6J0ZJVA
If you start the App it will take ages until it pops up, but then it works just fine. Feedback appreciated!
regards
Tiedemate?I also have the same problem, sound stop working after getting SP2, I updated vista to SP2 because I want to update to windows 7, with win 7 I have try all the drivers without success I still have no sound and with some drivers I get a blue screen. After 2 restarts windows 7 ask me to fix the problem with restore and vola everything works ok but no sound.
I am trying this:
http://forums.creative.com/showthread.php?=35324 -
I recently got an icloud account and now when I try and sign in it says the e-mail account is already taken. How do I get in to my icloud account?
I wouls also like to know how to download pics off of my ipod 5th generation onto my PC computer through icloud or any other way.It sounds like you are trying to create a new icloud account, not just logging into an existing account. When you type in your Apple ID and get that error, it's because you are trying to create an account using the same ID that is already being used in another account.
Go to Settings>iCloud and scroll to the bottom of the screen. If you are logged in, press the Delete button, then try logging in with the existing ID.
As for pics, the most secure way is to connect ipod to PC with USB and look at the Photos tab for your device in iTunes. Using Photo Stream is another way, but it doesn't always work, depending on conditions. -
How do I get iCal on my Mac to sync with my iphone 4.
It used to work and now it doesn't.
I am not on MobileMe or the Cloud.
Any suggestions will be most appreciated.Hi Arezzo
I'm asuming you are using iTunes then to sync? this can be done over WiFi or the USB cable.
Review your setting for the calendar sync once iTunes is open and your iPhone is connected. Make sure your Calendars are selected to sync that you need. By default all calendars will.
So the option i have for you is to reset the sync service and this will reset those settings in iTunes. Meaning that you will have to switch them on again in iTunes to sync. But this mostly clears unresolved sync issues.
Please do yourself a favour and hit backup in iTunes before doing any testing. iTunes will then keep a local backup of your iPhone in case of any data loss.
{added}
open Terminal from your Utilities folder and paste this command in to reset. OS X 10.6 - 10.8
/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full [press Enter]
if it prompts for a password, just type your password and hit [Enter] again.
Open iTunes then set your syncs up and it should then carry on again.
Message was edited by: WaldoWTM -
Hi, so I pushed autofill because I thought that it would put music on my phone from a different iTunes library but it didn't work, and now the songs show up grey in my music on my phone and they won't play, but they are still there. What can I do to fix this and get rid of the grey songs?
Go back to iTunes, select the Music tab, uncheck the 'sync music; button, then hit apply.
Maybe you are looking for
-
My iPod touch is stuck on one song in my play list when in the shuffle mode. How do I fix this to shuffle through all the songs in that playlist?
-
How can I get my movie clip to resize according to screen size?
I have a movie clip (startMenu); inside it there are buttons, text, and graphics. This is a game I am making, and it will be played on different screen sizes of Android. This is the code I have so far: stage.scaleMode = StageScaleMode.NO_SCALE; stage
-
Right-click to open photos in PSE
I used to be able to right-click on a photo and select 'open with PSE 11' but, I installed Portrait Professional on my laptop and now PSE doesn't show as an option. I even tried to change the program at the bottom of the window, but PSE doesn't even
-
Hi im workin on school project and i had encounterd some problems , i have my oracle base on local computer and im trying to display data with table but jus cant get it work right. Im trying to display name , surname , salary and id project from tabl
-
Using somExpression in a function
I have some event script that I would like to make into a function. Because the object on which I would run this function (and many other similar functions) are on different subforms and such, I would love to be able to use the somExpression in my f