Finally Got Mavericks Working Great!

Thank you, members of the forum, for helping me to get Mavericks working as intended...awesome...me, big grin!

Similar Messages

Is mavericks working great

is Mavericks working great?

Allan,
Which part of "you research it first to find out what it is going to do" seems the same as "it works great"?
I rest my case.
As long as you have to research, and you have to backup is necessary, "working great" is not a good answer, nor the most accurate answer. Leading people to mistaken sense of security is just as bad as giving bad advice in the first place. Don't just answer "it works great." Answer "it works great if you are backed up, and you have checked the software compatibility." Just "it works great" leads to a false sense of security. I've been here 14 years, and I'm not going to let another "this update killed my first born" appear under my watch. If I miss something, well that's because I can't be everywhere at once. And I expect people to realize that leaving others with a false sense of security, is a sure way to get people upset when it does not work great.

Finally got AVRCP working!!!

Great job guys and just in time!
Back in July I posted this somewhere (I thought it was here, but it might have been another Discussion)...
Hey guys. I really hope you hear us soon. I don't know why Bluetooth AVRCP is only partially implemented even in iPhone 4.0, but it goes beyond a mere convenience issue. For many of your customers it is a legal issue and for all of us who enjoy the freedom of using stereo bluetooth for handsfree in our vehicles, it is a HUGE safety issue. Perhaps all it will take are a few traffic related deaths for you to make such a miniscule change. The technology has been there for 5 years or more. Don't you think it's about time? I'll make you a deal... If it isn't implemented by the time 5.0 is released, I'll be moving to an Android based device and getting away from my ridiculously inflated AT&T iPhone plan.
There's my two cents,
Todd Rasmussen
iPhone fan (losing the faith)
Now it works great and I can skip forwards and backwards with my headset and I don't have to worry about crashing my car while fumbling with my iPhone anymore. And they even got it done before the release of 5.0.

I guess this came out in September. I got laid off in September, so it probably wasn't at the top of my priorities. But thanks again. I REALLY needed you guys to get this implemented, and you did!

Finally got it working Thanks!!!

Greatings,
I finally got my Nano working again! Maybe this will help someone else. My iPod basically was not reconized by my computer so I followed the info posted elsewhere to reformat and then restore which did not fix my problem. I then reinstalled all the software which allowed my computer to recognize my iPod but iTunes still couldn't see it. iTunes would only recognize the iPod in disk mode but I could not get it out of disk mode; it would only flash the apple symbol. So after trying everything again I left the iPod connected to the computer and flashing do not disconnect and went to work. When I came home the laptop had shut itself down so I turned it back on not remembering the iPod was plugged in and still flashing. When the laptop came on it automatically went into an XP diagnostic screen saying that the volume on drive E was dirty and that it was repairing the drive. Once that finished I fired up iTunes and the name your iPod screen came up and then it started downloading my library and is working just like new now. Hopefully this will help someone else because it is very frustrating when you get really close to fixing it and can't make it work. Thanks to all folks that post!

excellent news Libba. (that was an absolute nightmare with the reinstalls that you were going through before.)
this is actually the second time now i've seen something like that ... where XP finally noticed that there was something wrong with the drive on the ipod, and then the disk repair allowed a restore to go through properly. (so we were in exotica territory with this one too ... granted, Mitch and other folk spend more time doing disk-damage remedial work than i do.)
Mitch here is checking on the following possibility with the drive letter:
Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear
for additional info on how Windows drive letter assignments work, follow the link in the document through to the Microsoft KB doc on drive letter assignment issues.

OK Finally got it working BUT!

well my replacment xskey arrived (hooray!) so now im working with logic finally, i have a few questions tho...
1. how do i set logic to open a new project with the standard 8 audio tracks and 8 audio inst tracks? atm mines only coming up with 4 audio, and it has 8 audio inst but it go's down 1 2 3 4 1 2 3 4.
2. how do u get the keyboard to work like as a midi keyboard (ive heard theres a way)
and 3. how do u assign audio channels small pictures of the instrement at the left hand side?
cheers!
james

Check out the manual for "Autoload" -- that's the name of the song file that's automatically loaded each time you start Logic or create a new file. You may want to look at some of the Peachpit books for walking you through creating this file to match your studio and workflow.
Use Caps Lock to bring up a little keyboard on the screen that you can play with your computer keyboard.
To change a track's icon, make sure you can see the track's info in the Arrange window. First select the track you want to work with. Pressing P toggles the properties column on the left. You may have to open up one of the areas using the little drop-down triangle thing, but you'll see an icon for the track in the properties area. Click and hold it to bring up a list of icons. You can create your own icons in the png format. Read the manual if you want to add your own images to Logic's standard icons.

Finally got NetInstall working! Now a question...

After, many attempts NetBoot is finally working. Now I would like to use NetInstall to upgrade several Tiger clients to Leopard.
I created a NetInstall image from my Leopard Install DVD and was able to boot a client off the image and then run through the Leopard install just fine. What I'd like to know is can I automate the install so that I can run it hands-free and also have it install all software updates as the Leopard Install is pretty old.
Thanks

Another (My and many people's prefered way) of doing this all, including automation, is to use Mike Bombich's excellent NetRestore application.
It includes a helper for pulling images from machines for restore (rather than running an installer over the network) and facilitates creation of special netboot images that fire up the NetRestore application on boot. This application can be set to full automation, but also can have a list of images to restore, or allow for restore from other sources such as multicasts and file shares on other Mac or Windows servers etc.

Mac Mini LCD Display - finally got it working but....

Hello,
I've posted on here many times about using the mac mini with my LCD display. The display runs at 60hz and a 640 x 480 resolution. For about four weeks, the mac mini would not connect to my screen. I installed display config x and had something of a result. By loading the mac mini up with my old pc monitor plugged in and then switching the vga plug once the mini was loaded, I managed to get a picture!
Just when I thought my troubles were over, I realised that when the mini went to sleep, if I woke it up I had exactly the same problem. I would have to plus it into my pc monitor, wake it up then switch it with my LCD VGA cable.
Is there anyway round having to do this every time I want to use my mini?
Thanks
Mark

Check out the manual for "Autoload" -- that's the name of the song file that's automatically loaded each time you start Logic or create a new file. You may want to look at some of the Peachpit books for walking you through creating this file to match your studio and workflow.
Use Caps Lock to bring up a little keyboard on the screen that you can play with your computer keyboard.
To change a track's icon, make sure you can see the track's info in the Arrange window. First select the track you want to work with. Pressing P toggles the properties column on the left. You may have to open up one of the areas using the little drop-down triangle thing, but you'll see an icon for the track in the properties area. Click and hold it to bring up a list of icons. You can create your own icons in the png format. Read the manual if you want to add your own images to Logic's standard icons.

Maverick worked great, then suddenly SLOW after installed WebRoot virus software

When I first upgraded to Mavericks my system was super fast!
Then I downloaded a trial version of WebRoot security software & then full version. Then started to have the screen freeze (sometimes seemed to be associated with the mouse cursor and sometimes not?), had to force quit. AND, then the system started up SLOW. So I uninstalled Webroot.
But system still slow in start up phase PLUS now in the middle of the monitor there's a break in the image all the way across the screen which then disappears after about 30seconds or so.
What can I do to fix the start up speed and what is up with the screen break (never had that in any of my prior Macs). Thanks, Charlotte

Do waht leroydouglas suggested. Anti virus software is not needed on Macs. They do more harm than good at the present time.
Also avoid malware like Mackeeper, CleanMyMac and similare cleaning apps.
OT

Finally got Totem working with compiz

This may help somebody. To get totem-xine working with compiz edit ~/.gconf2/totem_config and add the following line
video.driver:xshm

I found only need to use video.driver:xshm if using accelmethod xaa. if using exa as explained in http://wiki.archlinux.org/index.php/Intel_Graphics you do not need to alter the config file.

Finally Got VLAN's to Working

I bought a new Samsung TV that I wired into my LAN. Unfortunately, when I hit the source button it would list all my Sonos equipment as possible input sources.
I tried setting up VLAN's without any luck.
For those wanting to set up VLAN's that can access the internet but not each other, I found this article very helpful: http://www.yamahaproaudio.com/global/en/training_support/selftraining/dante_guide/chapter2/03_vlan/
I had previously tried to set up VLAN's but just now realized what the problem was. In my basement I have an LGS318P switch that was connected via 2 CAT6 cables in a LAG setting (ports 17/18 of the switch and ports 1/2 of the LRT214 router). This is what prevented me from setting up the VLAN.
I set up the VLAN on my LGS318P with port 18 connecting to the LRT214 port 1. I set the port mode to trunk (its default) with VLAN1 being untagged and VLAN2 being tagged. I did the same thing for my LGS308P in my living room -- VLAN1 untagged and VLAN2 tagged on port 1 (trunk). I set ports 2-8 to access mode with 2-6 and 8 being set as untagged VLAN1 and forbidden VLAN2. I then set up port 7 (where the Samsung TV is connected) as forbidden VLAN1 and untagged VLAN2.
I turned on RIP'ing for IP4 and IPv6 on the LRT214 and didn't turn on interVLAN routing.
Everything seems to be working now without any problems whatsoever. I seem to have isolated my TV from the rest of my network. Yay!

Using the same principal, I was able to create a third VLAN and set up a guest network with all regular WiFi traffic as untagged and the guest network as tagged (3). Set the switch ports to the router and WAP as trunks, VLAN1 as untagged and VLAN3 as tagged. Set all other ports as forbidden for VLAN3 so they couldn't cross talk.
Initially I couldn't get it to woke, but then I realized I had the router set to give my MacBook an assigned IP in the 10.0.1.x subnet when VLAN3 was set up for 10.0.3.x subnet.
Glad I finally got this working. Took forever!!!

Finally got Mavricks downloaded.....but.....

Yeah, I finally got Mavericks downloaded......since my internet service kept going down during the downloading it makes me a little nervous to install it. I was told it was probably ok. but if I go ahead with the install and something doesn't work properly, will it be possible to re install it .
I really am sorry to be such a pest.....I truly appreciate all of you!
thanks
Cori

Of course. However, as you have a bad Internet connection, the best thing you can do is to create a USB drive or DVD with the OS X Mavericks installer with Lion Diskmaker > http://liondiskmaker.com By doing this, you won't have to redownload Mavericks each time you have to reinstall Mac OS X.
Also, before upgrading, make a backup of your files with Time Machine and check that your applications are compatible > http://www.roaringapps.com

ATI driver for win7 Macbook pro 2010 anyone got it working?

I'm trying to get the windows7 ati driver to work. Loaded the bootcamp drivers but the display driver is just the generic monitor resolution 1280 x 1024.

sorry its Nvidia and I finally got it working. Had to remove and then reinstall bootcamp drivers.

Remote printer is recognized but message says can't find printer? It worked great before installing OSX Maverick

Remote printer is recognized but message says can't find printer? It worked great before installing OSX Maverick?

Thank you for your response.
Unfortunately I have already rebooted the router and that did not fix the problem. The weird thing is that the computer is connected to the network, it just won't connect to my computer. I have printed the network configuration page to confirm this, and it says the wireless signal is strong.
I have not changed anything at all recently in terms of routers, networks, etc. The printer stopped working completely randomly.
Is there a part in the printer that like emits a signal which computers, phones, etc are supposed to detect? I don't know enough about the mechanics to really theorize about what is wrong, but it seems like that is the only thing that stopped working.
Do you have any other suggestions?

HT203167 I finally got the update of IPHOTO 11 to download, now when I try to open my IPhoto it says it needs to be prepared to work, so I install that and it says it is downloaded, but when I try to open my Iphoto it just keeps repeating that it needs to

The above question is too big to read, so this is what it says>>>>I finally got the new IPhoto 11 to download after problems with the installation; now when I open it, a message pops up that says to continue I need to prepare the old version for the new....so I downloaded the preparation download and it says it is installed, but when I go back to open IPhoto again after this installation, the same message keeps popping up! I cannot find any of my pictures either. What is going wrong and how can I continue with IPhoto and update and get my pictures again? This all has happened because I made a big book of my travels and when I went to purchase it it said I could no longer buy books using the old IPhoto 7.........so I updated everthing and bought the new version and did everything it said, but still not working:::HELP!

You have to download and run the upgrader then launch iPhoto. Go to the utilities folder in Applications and launch the iPhoto upgrader. Then launch iPhoto and it will upgrade the library
LN

Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!

Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!
How do I get this feature working again? I am reluctant to move to iTunes 10.7 because I don't trust Apple at the moment.

My suggestion:
1) Always using MAC AIR with the power plug in.
2)Don' let the power level of battory fall under 30% percentage.
3)If the MAC can't be recharged now, just let it be with power plugged, WAIT...

Finally Got Mavericks Working Great!

Similar Messages

Maybe you are looking for