Finally on the move!!!

after two days my package is now in transit from the memphis hub just updated at 4:36 pm eagerly waiting for monday

mines on the move from memphis to nashville. then sunday night or early monday morning it will go to Murfreesboro...then sometime before 830am it will be out for delivery... atleast that is the way every phone I have ever ordered from verizon has gone...and... Then depending on which driver gets it...it wiil be at my house at 10 or so... or 1:30 or so...seems like phones around here always gets a different driver, then my normal fedex guy,,,, either way, I know fedex will have it to me on time and ahead of when I thought I would get it
keep up the phun later

Similar Messages

I finally made the move to an Intel Mac

I finally made the move to an Intel Mac. . . I bought a used Macbook Pro 15" core duo, 2.16Ghz, 2g ram, 7200rpm 500G HD. Couldn't pass it up at 600.00
OS, Leopard fresh install and I installed FCP Studio as well. Runs pretty good. I also have SHake, which I'm trying to teach myself. Certainly no state of the art, but twice as fast as my G4 desktop.
I'm going to buy FCP Studio 3 upgrade... and retire my FCPStudio (5.1.4).
Any cautions?

Heya,
Keep in mind that a clean install of FCS3 vs. upgrade from 5.1.4 means you will lose Live Type.app because Live Type is no longer available in FCS3 since most of the features have been integrated into Motion. If you are used to working in the Live Type interface then upgrade to FCS3 from 5.1.4 vs. performing a clean install. If you upgrade from Final Cut Studio 5.1.4 to FCS3 then you will keep Live Type and it will still launch and be useable. If you perform a clean install of FCS3 then you will lose Live Type.app in the process. If you want to keep Live Type on your new/used Intel Mac then install FCP 5.1.4 first and then perform the upgrade installation of FCS3.

Subject : Slideshow looks bad Hello guys I have a project in my Final Cut just about done. I want to add my slideshow as part of the project and burn it to DVD. In my slideshow, there are some stills from the movie clips and some downloaded from the i

Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSC

Thank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc

"Error: Final Cut Pro was unable to read the movie file just captured"

Hello everyone!
We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
We reinstalled the Final Cut Pro software all over again thinking that maybe the software got corrupted and we also rectified any disk permissions for the hard drives.
Any ideas?
Thanks
Efrain
G 5 Mac OS X (10.4.8)

We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.< </div>
You eventually want to figure out how that happened and make sure you fix it.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
<
You reformatted the external drive, yes? You might not have used the correct initialization setting. Should be Macintosh HFS, journalling is optional. Or you have a drive formatted for Winderz.
Aside from incorrect drive formatting, we have seen this error if the capture is incomplete or improperly terminated.
It's not an FCP issue, it's hardware.
bogiesan

I have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a white it says share successful but i cannot find where the movie has been saved???need help

i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios

EExactly what settings are you using. Some go to iTunes.

HT204370 I purchased a movie yesterday and started the download. The download seemed to hang up at about 90%. Finally, it showed that it was ready to watch, but the movie will not play. Download is apparently corrupt. How do I get a working version?

I purchased a movie yesterday and started the download. The download seemed to hang up at about 90%. Finally, it showed that it was ready to watch, but the movie will not play. Download is apparently corrupt. How do I get a working version?

Depending upon what country that you are in (films can't be re-downloaded in all countries) then try deleting the film from your iPad and redownload it via the Purchased tab in the iTunes store app (or the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes).
If you aren't in a country where you can re-download films, or if you have problems with the re-downloaded version, then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
If the 'report a problem' link doesn't work (it's been taking some people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.

We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got.

HT3775 I am downloading a Final Cut Pro x project directly to Quicktime. The movie will not play, stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

I am downloading a Final Cut Pro x project directly to Quicktime. The movie will not play stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

My existing movies are all the following types straight from FinalCut
Apple Intermediate Codec, 1920 × 1080, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
This particular movie is 6.66 Gb
The new Quicktime player in OS Mavericks converts these to the following format:
Apple ProRes 422, 1920 x 1080
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
And a movie size of 6.48 Gb
Please, please can someone tell me why?

Final Cut can't read the Movie?

When I attempt to capture video using the DV converter option, it says it is capturing the clip. However, when I stop capture I immediately get a message saying "Final Cut Express could not read the movie you just captured."
I have dumped prefs, used FCE rescue etc. Can anyone help? I only wanted FCE to capture clips longer than iMovie's 2 gig limit.
Best regards and many thanks for any help.

Thank you for the response!
My original material is an old VHS tape. It is going through a qualified DV converter (Pyro A/V Link). This setup works fine in iMovie HD but I'd like to be able to capture clips longer than the iMovie's 2 gig limit. It's really the only reason I bought FCE.
When I attempt to capture it says it is capturing but I see nothing but a black screen in the capture window. Also, the upper viewer says "preview disabled". Then, when I hit "exc" to stop, it tells me that FCE cannot read the format of the capture.
I just tried deleting all things FCE and reloading the software from the original disc but nothing has changed.
Ring any Bells? Again, thanks for any insights.

I finalized my iMovie project. Where are the .mov files? (1080,mov, 720.mov, etc.)

Hi everyone I'm an iMovie newbie,
I finalized my iMovie project. I am using iMovie 9.0.9 by the way. I can't seem to locate the movie files when I go to upload my video to YouTube. I also noticed that the files for my previous videos are gone as well. For now, I'm exporting using QuickTime, but that is taking way too much time and I have never had to do this before. I waited an hour for my project to finalize, where are the files? Where can I find them?
Thank you in advance.

Hi JBK
*Huge thanks for this* - the link proved very useful. I tried the MPEG STREAMCLIP option and like yourself exported to QuickTime/Apple Intermediate Codex @ 100% quality (you can also export in DV mode with much the same results) - it worked fine but file sizes trebled and quality reduced (you can also. As you say its also a pain to have to go though another process. To be able to do it inside imove is a much better option (thanks to tjworld for that, who would have thought of doing that!!!) Surely this will be something Apple have to sort out in the next upgrade. So pleased that I can continue using the Zi6 as it's a really smart little camera - even though mine is pink one (the camera that is!) This is the first time I've used a discussion stream so thanks again all for the help
Paul

Where would any downloaded rental movies be downloaded to on my iPad? Just spent over $40 in data top ups and nearly two days trying to a. Download a purchased movie and b. find the movie on my iPad.

I bought this iPad (think it is an iPad 2 not actually sure, a about a few months ago. Yesterday I decided to go on iTunes store and purchase a rental movie which cost approx $6 NZD. After about 2 hours I ran out of data and the movie hadn't even downloaded halfway so I purchased more data thinking another Gb would do. Then i got a message from itunes that my ipad didnt have enough storage so i went into settings and dleeted apps and docs (apparently also deleted from icloud too) to make room for the movie. Now after purchasing another 7GB of data at over three times the cost of the rented movie it finally finished downloading and I had enough space on my iPad. But now I can't find the actual movie...I go to iTunes to purchases and view movies , to downloads and searched the title of the movie...I can see an icon of it and it is in a separate place from other purchases but it says downloaded in faded lettering. Where is it? Why have I just wastednearlyb$50 just tying to download and watch one measly movie! It is obviously some secret formula or thing I've missed...it shouldn't be so hard! The day before this I successfully downloaded a song I purchased and can listen to with no probs. do I need another app to store downloaded movies or something?

But now I can't find the actual movie...I go to iTunes to purchases and view movies , to downloads and searched the title of the movie...I can see an icon of it and it is in a separate place from other purchases but it says downloaded in faded lettering. Where is it?
If you can't find the movie you downloaded on your iPad, iPhone or iPod Touch, check inside your Videos App

Digital Copies of Purchased Movies - Nothing on the Blu-Ray box cover says that we have a limited time to download the movies. Quite unfair

More of a complaint (which curiously has no sept place to be posted). I don't understand why I have to use my Digital Copy Certificate within x amount of time. AND nowhere on the movie cover does it say that the D.Copies have expiration dates!!

After a month I have finally figured out the problem, the movies that I had downloaded were from "Fox" and after talking to a level 2 engineer from Apple who downloaded the same black swan movie I had, we came to the conclusion and resolution that you should be prepared to wait 10 seconds for any movie from "Fox" to start playing.

HT3523 I can play an .mov file but cannot open it to move it to another drive/disc/etc. When we try to open it, we get a message that says "The movie file for "beanmine.mov" cannot be found. Without this file, the movie cannot play properly."

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
Help!

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Sounds like you created a "Reference" file here. I.e., a "Reference" file is a file that tells the player how to play the data contained in a "Resource" file. When you try to open the "Reference" file in the QT Player app, the first thing the player does is check to see if the "Resource" data file is is still available where it is supposed to be. (I.e., moving/deleting the resource file or moving reference file without moving the resource file to maintain the relative path between the two will generate the error message you mentioned.)
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
That depends. Deleting a file does not actually erase the data immediately. Instead, the operating system just tells the system directory that the space containing the movie data is available for reuse if/when needed. As time passes, the chance that some of the data sectors will be re-written by other data continuously increases. To restore the file normally requires use of a special utility that both locates and restores all of the linked sectors containing the "deleted" movie data in their correct order. Other methods of restoring files would depend on the software you routinely have active on your system. For instance, do you use "TimeMachine?" or orther software that automatically backs up your data periodically? If so, then follow the instructions for your particular application to recover a deleted file.

I got charged twice for a movie (Safe House). Can i get a refund for that? we were not able to finish the movie and now were trying to watch it again. We have an hour left, however the apple tv is still loading the movie again for 2 hrs

i got charged twice for a movie (Safe House). Can i get a refund for that? we were not able to finish the movie last night, and now we're trying to watch it again. We have an hour left, however the apple tv is still loading the movie again for 2 hrs & 46 mins.

Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

Finally on the move!!!

Similar Messages

Maybe you are looking for