Finally switching from pc to mac..few questions.

I got a macbook pro, slowly gearing up to migrate everything over. I'm going to use Detto to do the migration. They assured me my entire itunes library and playlist would transfer. I have iphone, and 3 ipods. My itunes library on computer is much larger than any of the ipods. Is this gonna fly? Or do I need to buy another third party software to transfer everything? My iphone works great with outlook, switching to entourage, I'm going to make sure that my contacts/calendar transfer before even thinking about the iphone. Is it going to be plug and play? Anything I should watch out for? I am a total mac rook, love of iphone got me to switch to the mac...
Thanks, mike

http://www.apple.com/support/switch101/ will get you started with switching.

Similar Messages

Switching from PC - Have a few questions

I have read the forums and talked to AppleCare support and I have a few questions on the Mac Pro.
1. I was told by Apple that using RAM other than the overpriced "Apple" brand would void the warranty (I typically use matched Mushkin or Crucial)- is there any point in getting the AppleCare insurance then?
2. Appple told me that Western Digital Raptor 10,000 RPM HD's were not supported, yet I see a number of you use this drive - are you using a SATA adapter or putting it one of the 4 drive bays?
3. Am I limited to Apple's Superdrive DVD/CD or will any ATAPI drive work?
4. The graphics card situation is pathetic - does anyone know is there are planned updates before I spend $700 on 2 ATI 1900's to run 2 30" Cinema displays. Does Apple typically come out with new products at the same time each year?
5. Does anyone know of software to control multiple monitors i.e. Designate virtual desktops on a specific monitor, or specify that Application A opens on monitor 1 while Application B opens on monitor 2?
Any help will be appreciated - Apple doesn't seem to be very forthcoming on these topics - I am still anxious to rid myself of the virus a day problem and Microsoft software that becomes slower and less productive with every revision.

1. I was told by Apple that using RAM other than the overpriced "Apple" brand would void the warranty (I typically use matched Mushkin or Crucial)- is there any point in getting the AppleCare insurance then?
It won't void the warrantee (unless you damage the computer when installing it), but it won't be covered. If it goes for service, remove the non-Apple memory first (it's a good idea to do that first, anyway, to see if it fixes the problem).
2. Appple told me that Western Digital Raptor 10,000 RPM HD's were not supported, yet I see a number of you use this drive - are you using a SATA adapter or putting it one of the 4 drive bays?
Same as above.
3. Am I limited to Apple's Superdrive DVD/CD or will any ATAPI drive work?
No. Most ATA (or SATA) optical drives will work.
5. Does anyone know of software to control multiple monitors i.e. Designate virtual desktops on a specific monitor, or specify that Application A opens on monitor 1 while Application B opens on monitor 2?
Many application remember the last monitor they used. Some (e.g. Graphics Converter) have preference settings to put the main window on one display, the controls on the other. Some (e.g QuickTime Player, VLC have view settings to put the full screen output on a selected monitor.

Switching from PC to Mac, have question about processing speed

Hi, I am going to buy a used Mac off of ebay and I am pretty clueless about where to start. I am not very knowledgable when it comes to the difference in processing speeds on pc's and apples both and have just been using what has been passed along. I am on a budget and cannot afford to do a bunch of upgrades when I get a new (to me) apple. I am currently working on a old pc (8 years?) that has had as many upgrades as it can handle. It is a Pentium III 548 mhz, 384 mb of ram and 40g hd on Windows XP. The Apple that I am stuck on getting right now is a G3 with a bunch of upgrades. It is an Imac PowerPC g3 with a 600mhz processor, 512 mb of memory, 120 gb hard drive. It has OS X 10.4 Tiger and ILife and has a single processor. It has a airport extreme card also. My question is 1) Does it take less mhz and ram to run the operating system for an apple and 2) am I going to notice a big difference in speed between what I have now and with the apple? The g3 is $249 and comes with a 90 day guarantee minus shipping. Any help is appreciated, thanks in advance!
Tracy

I'd save your money or apply it to an Apple G4 (AGP or newer) tower. Depending on how it was configured, you may find that your PIII was a little faster loading web pages than the 600 MHz iMac. My 1 GHz P3s are faster than my iMac DV G3-400 MHz models. I think $249 plus shipping for a 5 or 6 year-old iMac is a bit high. I picked up one of my G3-400 MHz iMac DVs for $20 at a thrift store. If there are any in your area that accept donated computers, you might want to check for a local bargain. While the 600 MHz model that you described is loaded, that's about as far as it goes, other than bumping the memory to 1 GB, but that would likely involve removing a pair of 256 MB DIMMs already in it, and buying a pair of 512 MB DIMMs. If it has a single 512 MB DIMM installed, you wouldn't have to spend as much. Selling the computer with Tiger installed but without the OS installer media will eventually put you in a bind, when you'll need to boot from the installer CD to perform disk repair maintenance. Some may consider Tiger to be a bit demanding of that iMac's system resources, preferring the predecessor "Panther" instead. The bottom line is that the iMac is somewhat limited, in terms of design (no PCI slots) and/or future upgrade potential. If it will suit your needs as a starter Mac, try finding a comparable model for less. You might also check for used computer dealers in your area, as that saves the cost of shipping, and return shipping - if there's a problem. The G4 tower has more potential for hardware tweaking, if you decide to stick with the Mac OS. You can find G4 towers at eBay selling for less than $249, but you'd need to have a monitor. Is space at a premium, in terms of a preference for the iMac's compact form factor? There is a direct correlation between the OS version and the optimal processor speed and amount of installed memory to adequately run it. OS X needs/uses more memory than the older, pre-OS Mac versions, just as Vista or XP2 requires more memory than Windows Me or 98SE. A comparison of Intel's P3s to Apple's G3s or G4s gets into the debate over which one handles more instructions per clock cycle than the other at a given speed. It's difficult to do a head-to-head comparison, because the hardware and software is not the same.

Switching from Windows to Mac(iTunes question!!)

Okay so I have an account on iTunes and have bought alot of stuff. I have a video iPod and my parents just orderd me a macbook for my birthday. Okay so is there a way I can make sure my library and account and everything can be on my macbook too? One time I tried to plug my iPod into my friends computer to put her shows on my iPod and it went cuckoo.
How can I make sure I move my whole library over to my macbook? xD I'm new at this.

Don't worry about the 'friends computer' situation coming up again. You're working with your own library and you are merely moving it to a different computer. Lots of ways to get your music and video files onto the MacBook.
Your family have a network? (Could be the easiest way.)
You could burn all the files to DVD's or CD's. (You should already have all your media backed up anyways)
As already said, flash drives are also a possibility.
Just copy/move the media files to the macbook. Then authorize the macbook. Authorizing is found under the "Store" iTunes menu item. You can authorize up to 5 computers to play media purchased from the iTunes Store.
You don't have to "take your account" over to the macbook. When you visit the iTunes store when using your macbook just sign in with your existing account ID and password and you'll be good to go.
Hey, enjoy the mac world you are entering. I'm a relatively new adopter and am really happy with it.

Building a NAS while switching from PC to Mac

I am getting ready to make the switch from PC to MAC. I currently have my primary desktop PC functioning as a shared media storage center, with USB external drive as backup.   All media is funnelled through iTunes and synced with two Apple TVs in the house that are CAT-6 connected to network switch.   I use Apple TV (cut the cord) to browse my iTunes library over LAN and stream recorded TV/ripped movies quite a bit.
My plan is to purchase a MacBook Pro and eventually get a Thunderbold Monitor, Keyboard, and Mouse to act as docking station.
I would like to transition my media files to a NAS, but I'm struggling to find a good guide for making my own NAS. My understanding is that it would be pretty easy to use the parts I have on my home built PC to function as a NAS in an area separate from the MacBook.
A few specific questions:
1) Will I need to specially format my NAS drives to be Mac-friendly?
     1a) Will any special formatting limit flexibility of sharing that data with non-Mac laptops/PCs?
2) Will the Apple TV be able to "see" the music/movie iTunes library on the NAS or, like it is now, will it require the PC/NAS to be running iTunes in order for the libary to be viewable on Apple TV?
I really don't want to drop several hundred bucks on a Time Capsule. I already have an airport extreme with express x 2 (working great, love them).
Any advice here would be appreciated. I look forward to your responses.
Thanks and take care.

I am getting ready to make the switch from PC to MAC. I currently have my primary desktop PC functioning as a shared media storage center, with USB external drive as backup.   All media is funnelled through iTunes and synced with two Apple TVs in the house that are CAT-6 connected to network switch.   I use Apple TV (cut the cord) to browse my iTunes library over LAN and stream recorded TV/ripped movies quite a bit.
My plan is to purchase a MacBook Pro and eventually get a Thunderbold Monitor, Keyboard, and Mouse to act as docking station.
I would like to transition my media files to a NAS, but I'm struggling to find a good guide for making my own NAS. My understanding is that it would be pretty easy to use the parts I have on my home built PC to function as a NAS in an area separate from the MacBook.
A few specific questions:
1) Will I need to specially format my NAS drives to be Mac-friendly?
     1a) Will any special formatting limit flexibility of sharing that data with non-Mac laptops/PCs?
2) Will the Apple TV be able to "see" the music/movie iTunes library on the NAS or, like it is now, will it require the PC/NAS to be running iTunes in order for the libary to be viewable on Apple TV?
I really don't want to drop several hundred bucks on a Time Capsule. I already have an airport extreme with express x 2 (working great, love them).
Any advice here would be appreciated. I look forward to your responses.
Thanks and take care.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.
I am currently using Photoshop Elements 8 on Windows 7. After several years of use, I am self taught and adequately proficient for an amateur. What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing.
Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust. Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom. Frankly, I'm thinking that it would be smoother to stay within the Apple product line.
So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies). But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
- If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?
- if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?
- Can it splice together several separate photos to give a panoramic?
If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).
Thanks in advance for your consideration and help!

I am concerned, however, about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
Thanks for any insight on this
Amy,
Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

Switching from Windows to Mac. Is it worth it? Please help!

Hey everybody,
I think I finally made my decision to switch from windows to Mac,..the I-book. G4 (not the power book). The I-book I want is around 1299.00, with the wider screen,..than the smaller i-book.
Anyhow,.what led me to this decision was just sending back the Sony FS series. It was sleek beautiful and"white" like I love,..but the speakers were awful. I have just about given up on trying to find a decent notebook. I love the look of the i-book,..but cant get that gorgeous wide screen from Sony out of my mind. It was more than the speakers. Just too noisy. Anyway...if you bought this i-book all over again,..would you? Alos I have a brand new Linskys Router with the built in Security. Would the Macs intergrated wireless card,..work with my router?
Please help!
Lil
planning on getting this notebook. Need advice

I'm afraid you're not exactly going to get an unbiased opinion here
As a long-time Mac fan (back since System 6) who was forced into a PC world man years ago, OSX has re-kindled my passion for computing. I'm an old Unix guy and OSX has combined the best PC operating system with the power of Unix. To the average user who doesn't care about shell scripts and porting free applications, what you'll get from Unix is a tremendous amount of reliability and security...
One of the best reasons for anyone to switch to the Mac was summed up in a post over on iLounge as a reply to someone who was switching. When asked why anyone would switch, one reply simply said, "...because he realises that a computer should be a productivity tool, not a virus scanner."
In the year since I've bought my Mac Mini, the only failure I've had has been a crash of Virtual PC (an emulator that will allow you to run your old Windows-based applications), which took the virtual disk out and forced me to reinstall my Windows environment. That's nothing different than I've experienced countless times on my old PC.
That said, I'm looking at a 12" iBook. I didn't even consider the 14" because I don't want something larger that doesn't give me extra screen real-estate. I debated the 15" Powerbook but decided I don't really need it's larger screen, and I'd rather have something more portable. There are companies out there that sell dual-layer DVD-RW drives that can be installed in an iBook (even the 12" Powerbook only ships with a single-layer DVD burner).
512mb should be plenty, unless you plan on editing video or running Virtual PC--in which case, I'd recommend at least a gig.
Mini Mac OS X (10.4.3) 12" iBook + 2.3ghz Powermac on the way! Former Newton OMP user.

IPod classic - switching from Windows to Mac

I have an iPod classic and am switching from Windows to Mac - what's the best way to retain my iPod library? Thanks!

If you just want to connect and use the iPod on the Mac then set it to manual update on your PC first. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
Using iPod with Multiple computers
Managing content manually on iPod and iPhone
Syncing Music to iPod
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
Macs can read Windows drives, the iPod shuffle for instance comes Windows formatted and is fully supported (you can update the firmware or restore it on the Mac and it retains it's Windows formatting). Other iPods (such as a 5th Generation or Classic for example) can be used in Windows format on a Mac but have to have the firmware updated or be restored on a PC to maintain the formatting. If however you don't intend using the iPod on a PC again you'll need to transfer your library from your PC so you can restore and reformat the iPod and keep it's firmware updated.
Once you are safely connected there are a few things you can do to restore your new iTunes directly from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
Senuti Mac Only (Currently only the beta version is iPod Touch & iPhone compatible)
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
TuneAid Mac only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPod Music Liberator Mac & Windows
iGadget Mac & Windows (iPhone and iPod Touch compatible)
Floola Mac & Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide

Recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42

recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?

johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/

I have switched from PC to Mac how do i use my windows version of adobe photoshop CS3 on my MAC?

i have switched from PC to Mac how do i use my windows version of adobe photoshop CS3 on my MAC?

rebel1568,
All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC. You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
CS3 is totally out of the upgrade or cross-grade loop. You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
Curt Y is correct in that CS2 will not run on current Mac-Intel machines. You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
Of course, you could run your Windows on your Mac if you installed and ran BootCamp or Parallells.

I have CC for work and my PC to do work at home. At home I switched from PC to Mac this weekend. I want to redownload my apps for the iMac but it's telling my I'm using a 30 day free trial. I need to discontinue the PC apps and download to the new compute

I have CC for work and my PC to do work at home. At home I switched from PC to Mac this weekend. I want to redownload my apps for the iMac but it's telling my I'm using a 30 day free trial. I need to discontinue the PC apps and download to the new computer.

YOu need to sign out of the PC thru the CC manager and then sign in on the Mac.

I have CS6 Design & Web Premium, would like to switch from PC to Mac. Can I do this for free?

I have CS6 Design & Web Premium, would like to switch from PC to Mac. Does anyone know if it's possible to do this for free? I have no interest in upgrading to CC.

Order an Adobe product platform swap or language swap
Mylenium

I'm switching from PC to Mac. I'm using my one time switch for Lightroom. I have elements 7. Can I upgrade or do I née to just buy outright?

I'm switching from PC to Mac. I'm using my one time switch for Lightroom. I have elements 7. Can I upgrade or do I née to just buy outright?

If you use the organizer, you need to buy the boxed version of PSE 12. You can usually find it at big box stores and online retailers for less than adobe's upgrade price, if you shop around. You need the boxed version because you get a serial number that works on both platforms, and you will need to install PSE 12 in windows first, upgrade your catalog, then make a full backup to a removable drive and restore from that to the mac, after installing PSE 12 there.
If you don't use organizer, it doesn't matter.

How do I switch from Windows to mac?

How do I switch from Windows to mac on a macmini?

Hi,
I assume you are talking about a BootCamp Windows, right ?
If so, usually you hold down the Alt/Option-key at startup of your Mac to get the Boot Selection screen.
There you can choose which Operating System to boot into.
Once in OSX you might wanna go to System Preferences - Startup Volume and set your OSX to be the default.
Regards
Stefan

I am looking to make the switch from pc to mac and have been eyeing the MBP 13". I would like to know whether it is fine to add RAM and SSD myself? any compatibility or warranty problems? what brand/type of RAM and SSD is the best fit? thank you.

i am looking to make the switch from pc to mac and have been eyeing the MBP 13". I would like to know whether it is fine to add RAM and SSD myself? any compatibility or warranty problems? what brand/type of RAM and SSD is the best fit? thank you.

Chamar wrote:
I'm possibly wrong here but I suspect opening a brand new MBP to add parts yourself will void the warranty. It is probably in the small print. I certainly would not risk it for an expensive Apple product.
Some (Windows) laptops have easy access to memory and disk slots that do not necessitate taking the complete back cover off. However, Apple does not make life easy for you.
However, if you are going for a 'used' machine it is probably worth a try.
Not possibly, definitely wrong, Ram and Hard Drive are considered user replaceable and will not void the warranty if changed.

Finally switching from pc to mac..few questions.

Similar Messages

Maybe you are looking for