Financial Analytics Reports in Local Currency

Advise needed to help in configuring BI Apps such that the Financial Analytics reports (GL, Payables, Profitability & Receivables) show the transaction values in local currency i.e. INR instead of the default global currency USD.
I have changed the source parameter values in the DAC Container Setup while loading the data from an EBS R12 instance. The following source parameters values have been changed to INR from USD -
$$GLOBAL1_CURR_CODE (for the document currency)
$$GLOBAL2_CURR_CODE (for the local currency)
$$GLOBAL3_CURR_CODE (for the global currency)
However, the Finacial Analytics Reports do not show any transactional values for the selected Ledger (having INR as the global currency). The data is populated in the Local Closing Amount, Local Opening Amount etc columns of the Fact - GL Balance but no data is populated in the Closing Amount (Global), Opening Amount(Global) etc columns.
Please advise to resolve the above mentioned localization issue in Financial Analytics.
Regards

Are you looking for Changing the Default currency in OBIA Dashboards

Similar Messages

Bank GL Report in Local currency

Hi SAP Friends,
My client requirement is that All accounts are to be maintained in Local Currency (MYR) and there is only 2 USD bank accounts (City Bank, MBB) to be maintained in foreign currency and also require converting to Local Currency (MYR) for reporting purpose.
Looking forward for your valuable inputs
Thanks
Para

hi
V K Para
Go to T CODE-S_PLO_86000031 OR S_PLO_86000030
IN this screen give currency as you want
you can view balances in USD
REGARDS
TRINADHNAIDU.A
Edited by: trinadhrao althi on Oct 20, 2008 2:02 PM

0SD_C03 report in local currency

Dear all,
I would like to get report in my local currency in 0SD_C03 , however all kf's are in statistical currency unit,
is there any way to get in local currency, i entered in sales order, other than currecy translation in bex?
Thanks

hi john,
just if that is a Standard Query , u can't perform any change over that,
otherwise u can create a copy query of ur standard query,
there u can edit the Key figures, nad then in the conversion tab u can select ur Target currency.
Remeber this Currency transaltion will only take place at runtime,
thanks.

Report Painter : Local currency is having decimal points for chile

Hi Friends,
I have a report painter in which the amount for the the countries which are not having the decimal places
like chile and Japan are displying with the decimal places, when i changed the base key figure as the transaction currency instead of the local currency then no data is coming.
If someone have some good ideas which can resolve this issue please suggest me.
Thanks & Regards
Digvijay

Hi Yogesh,
Thank you for ur reply.
in the report, i have 10 keyfigures. 4 are being picked up from the report and they have currency translation variable. The rest 6 are formulas. On these formulae, i restricted the decimal display to "nothing defined". it works fine for all the 6 formulae. for WON it does NOT show decimals and for the rest of the currencies, it shows decimals.
but how this can be achieved on the 4 direct keyfigures??
Rgds.,
ASha

Diplay Functional,Reporting and Local currency

Hi,
I've a requirement to display Transactions in functional,Reporting as well as in Local currency.Do I need to setup Oracle 11i Env in MRC for that?If so how to get the transactions displayed in Local cuirrency ?Do I need to Covert them or I've to create new set of books for the same like we create one for reporting currency?
This requirement is for 11.5.10.2 as well as R12
Thanks,
Mahender
Edited by: user518071 on Jul 30, 2010 6:20 AM

Hi
You need to do the following
In 11i
1. You need to set up Reporting Set of Books to get the transactions and reports in Reporting currency for Local Currency, Functional Currency.
2. If your Functional Currency is USD, Reporting Currency is EUR and Local Currency is AED, then you need to set Main SOB in USD and Reporting SOB in EUR and AED.
In R12
1. You can set Reporting currency if you need the transactions and reports in Reporting currency provided Chart of Accounts, Calendar and Convention is same.
If your Functional Currency is USD, Reporting Currency is EUR and Local Currency is AED, then you need to set Main SOB in USD and Reporting SOB in EUR and AED.
2. If the requirement is not only currency but you need for a different Calendar or COA or Accounting convention, then you need to set a Secondary Ledger
Hope this helps
Regards
Sivakumar

Cost budget report in local currency

Hello all,
I would like to use a statistical project to link maintenance costs to a budget that is maintained in PS. The functionality is all there. i'm now trying to find a proper report.
Currently I'm doubting between 2 options:
Option 1:
CJ30: budgetting in object currency
CJE0: reporting in Controling area currency. Translate to certain currency.
Problem: This always leeds to conversion issues:
budgetted 10000 ---> report shows 9940.
actual cost: 9000 -
> report shows 8340
Option 2:
CJ40 for planning on costelement level
S_ALR_87013543 in object currency
Problem: CJ40 is planned in Controling area currency
What I want is the following:
CJ30 or CJ40 in object currency
Report in object currency where.
Does anybody have an idea how to handle this?
thanks in advance,
Peter

NAG,
Thanks for your help. I have copied a standard hierarichal report and i'm now trying to add object currency as a key.
I have added the selection characteristic object currency in the characteristic tab, but that's not working. Ca you maybe gvie some more specific tips or if you have a certain link where i can find more details about configuration of a report?

Including Second Local currency in Report Painter

Hi there,
My client is using parallel currency and their LC2 is USD. I am trying to create a Cost centre report using report painter and want to add LC2 amounts in this report.
Is it possible to add LC2 using report painter?
The following is some additional info:
CO Area currency = SGD
Op. Concern currency = SGD
Would appreciate if you could help me with this. Thanks in advance.
Regards
RG

Hi,
I think that it may not be possible. Hence the thread has not attracted much. The controlling reports are available either in Controlling area currency and object currency which is a company currency.Then there is no question of getting report in Local currency 2. You can try in ABAP report by having a selection of L2 currency and its translation ratio.
Trust this helps much in getting right solution!
Cheers!

How to report with local and global currency in Deliveries?

Dear all,
i am working on a delivery scenario where i have in the datasource NETWR(Net value
), WAERK (Document currency).
I would like to be able to report with local currency and global currency.
Could you please help by explaining how to proceed?
Thank you.
Cheers

Hi Gilo,
You have to check with the business on the following.
1) What would be the key date of currency conversion? Is this any document date from the transaction ( Delivery Date ) or report execution date?
2) What would be the target currency ? ( for local and Global currency ). Whether this can be determined at the time of loading or should it be based on user selection criteria?
3) What is the exchange rate type that has to be used? ( for example 'M' ).
Once you have the answers to these questions, you can decide whether to do the currency conversion in the backend or front end in the report during runtime.
For example, if the user wants to input the target currency on selection variable and wants to use the exchage rate as of the report execution date, then this currency onversion has to be done at runtime.
For more details,Please check help.sap.com or SDN
Thanks,
Krishnan

Local Currency COP, KRW values wrong in report

I have the following problem. Any values in local currency COP (Columbian Pesos) or KRW (Korean Won) comes in a report 100 times in value. For example if the value in the infocube is 1950 COP, in the report it shows as 195,000 COP. This happens only for currencies COP, KRW. For all other currencies the value in the cube and report are same. This is happening in AR cube, AP cube, Inventory cube.
How to correct and is there any setting to be done for this.
Please note that i am not using any currency conversion. I am just reporting in local currency .
Ram

Hi Ram,
It should be a bug.
The situation is the following.
For example, you load amount in COP (KRW) = 12345. Since default number of decimal places for amounts with currency is 2, the system keeps amount loaded as 12345,00 (with 2 decimals).
There is a special table TCURX which lists currencies with number of decimals not equal to 2 (you can also access or set values in this table through SPRO -> SAP Netweaver -> General settings -> Currencies -> Set decimal places for currencies).
I beleive you can find KRW & COP in the mentioned above table with number of decimals not set (zero).
During query result generation the system apply the real number of decimals from TCURX table and 12345,00 is treated as amount without decimals (coma simply ignored). That gives 1234500 amount. The same amount in TND (with 3 decimals) becomes 1234,500 etc.
There are plenty of OSS notes about this bug, for example, # 760195. Not sure which one to implement. Youd better contact SAP Support.
As a workaround I can suggest either delete KWR & COP from TCURX table or use amounts without currency or as number (with a separate 0CURRENCY field going into the cube).
Best regards,
Eugene

Local Currency vs Document currency

Hi,
I have a question,
what is the difference b/w Local Currency and Document Currency.
Thanks,
Pria

HI Pria...
Local currencey is Company specific...for different companies there will be different local currency...
Document currency is related to FI...Currency in which a document is posted........
And as per SD.....Currency in which the total values in a sales and distribution document are calculated.
As per BI....
In SAP systems, every amount key figure is stored with respect to a currency key field. There are several
types of currency keys on OLTP data. The two most important currency types are the document (or
transaction) currency (BI InfoObject 0DOC_CURRCY) and the local (or company code) currency (BI
InfoObject 0LOC_CURRCY. The document currency is entered for each posting transaction of an OLTP
document-type record (for example financial documents), whereas the local currency is uniquely assigned to a company code when the OLTP system is customized.
So, the local currency can be used as a common currency for cross-application BI reporting (that is a
common reporting currency). Besides the document currency, every record within the final InfoProviders of the BI system should contain the local currency and the corresponding amounts with respect to the local currency.
Check this...
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975
Regards,
Debjani...

Problem with Inventory stock audit Report in other currency

Hi I have a problem with Inventory stock audit, the SBO show me the report in local currency, and I have to obtain that report in other currency, I was working with OINM table, but I don't know how obtain the report

Alberto,
Other currency information is available at the document row level and in the Journal Entries.
What you could do is join the OINM with the associated document and let the foriegn currency value.
OINM.TransType = ObjType (marketing document)
OINM.BASE_REF .......Document Ref
OINM.DocLineNum ......LineNum
Suda

Report want to see the local currency

dear all
i run the report me8fn, its show the toal value of order currency wise, but i required local currency.
what is the way pls explain me.
i run like theis
62000000 to 629999999
thanks

Generally purchase order will be in document currency,In GR it can be shown in local currency,Use dyanmic selections in ME80FN,
move exchange rate to right side,enter exchange rate as 1,put condtion not equal to 1.00 or otherwise use selective vendors if
its imports,in report,change view -->purchase order history.

Profit center report with cumulative local currency amount

Hi,
I am working to create a report with cumulative local currency .,so that the report data should tally with GL account balance (FS10N).
This report is for balance sheet accounts . Whenever we used to create report with either report painter or drill down report, the option for defining key characteristics is showing only the profit center currency, company code currency or transaction currency.No option for cumulative local currency.
Thanks,
Anitha

Hi Srinu
RPC0 applies to CC reports and not PCA reports
I am surprised by your statement that Summary reports derive values based on Current Fx rate
GLPCA and GLPCT are the tables that are used in line item and Summary reports.. check the value in GLPCT and do they match with GLPCA or not
I am still not convinced about your issue.. Why do you need currency conversion in report?
Assume your comp code curr is USD and Cont Area curr is EUR.. You will be able to see all reports in both currencies without any conversion required during report execution. This is because all the transactions are recorded in these two currencies
Ensure that the All Currencies indicator is turned ON for your contr area
Br. Ajay M

Report showing GL Accounts with document posted in currency other than local currency

We need a report that shows all the GL Accounts that had a document posted in currency other than local currency during the month. The purpose of such a report is that we should not miss any Foreign Currency Gain or Loss at the end of the month.
Is there such a report already in Standard SAP ? Please let me know. Points guaranteed.

Hi Ajay sir,
It's never be a bad idea. But I think Rajeev might be looking for a stright report than work around, which is not available.
Regards...
Jose

No report available to follow investments in local currency in GR55

Hello,
Capex Follow-up in SAP available only in Euro:
1) Transaction IM52: Impossible to distribute budget to IO or WBS in local currency (only in Euro)
2) Transactions GR55 for capex follow-up are available only in Euro
There is No accurate report available to follow investments in local currency (example CNY) ?
Edited by: Tarek AYACHI on Jun 2, 2010 10:15 AM

in order to make prove your theory , check for this material in MC.9 how it is giving the output to be how much valuated stock and value.
MB51 should also show the same for that GL .Check the material moments happened for this to come into plant stock and how they came like either by a PO or by a initial entry or by a stock transfer.
Even though if the purchase is free it inctreases the stock qty and value ... but not the purchasing cost for invoicing.
If it is non valuated it will go to consumption.
stock will be valuated with the GR accounting docs for that GL.
if the MC.9 and MB51 THERE is a descrepancy then need to be corrected.
Regards,

Financial Analytics Reports in Local Currency

Similar Messages

Maybe you are looking for