Financial impact - Need to correct the posting key

Dear All,
During a configuration,by mistake in OBYC in transaction key COC, in posting key, a entry 40 and 50 in the field Debit & credit was made.
However, It was blank in initially. Now when going to change it by making it blank, system throwing an error as:
"Specify at least one posting key "
Message no. F4837
Please suggest me to rid out from this issue, I would like to maintain it again as blank.
Thanks in advance..........
Warm Regards
Jayesh

Thanks Bijay,
The values of posting key in COC were blank.
I changed  and save that. but surprising thing is that, just immediately when I tried to made its blank.
system was not allowing to made it blank by thrown the error "Specify at least one posting key "
I do not want any value in it and would like as it was in initially i.e. blank  (standard)

Similar Messages

  • ASA 5505 Failure replaced and need to move the license key?

    Can someone point me in the right direction? My ASA 5505 died due to a power surge and I swapped it with a spare. I had Security Plus and a 50 user license and need to move the license keys from the failed ASA 5505 to the new one. I kept both my emails with the activation keys, but not sure how I get this transferred?  Thanks in advance.
    Joe

    I think this is totally unacceptable. For anyone else who uses a 5505 at home and has bought licenses and the hardware out of their own pocket, the idea here should be that you've already bought the hardware and the license. Seems obvious, right?
    Yes I can see the license being device specific if not only because that's the way you've designed your licensing activation schema; but if I've just had your product fail and bought another replacement, there should be an understanding or agreement between Cisco and the user that we can reinstate any licenses we've already bought.
    Do you really believe it's fair to make someone buy something from you twice, something that they've already bought from you? Do you actually believe that? I believe that the people in the Cisco Licensing department would agree with my viewpoint and I have a pending case with them for this issue right now. I will post my result here.
    Make your products last and perhaps I can give credence to your licensing beliefs, until then your products fail and so does your licensing logic.

  • Document types need restricted to specific posting keys

    Hi,
    When posting a KR document type with transaction F-43 we are able to post GL posting key (40) and posting key(50) without ever entering a vendor posting key(31).
    The question is how do we prevent this situation and make sure that a vendor posting key is used. We can use a validation rule but can this be done with standard configuration.
    Thx,
    -John

    Use a Validation OB28. You can use document type or transaccion code(f-43) in order to make mandatory the posting key 31. Keep in mind that you would need to use the accounting key 40 in order to post the expense.
    Regards

  • Entry help check fot the posting key in user exit.

    Hi,
      I am using an inbound idoc for posting FI document.I am just parking the document for the time being .For this i am using the user exit EXIT_SAPLF050_006.
       If I want to change this parked document as save as complete document is there anything that I can do in this user exit.Can you please tell me the entry help check for the posting key (changing parameter) in the exit?
    Thanks in advance
    Regards,
    Reni

    Hi,
      I am using an inbound idoc for posting FI document.I am just parking the document for the time being .For this i am using the user exit EXIT_SAPLF050_006.
       If I want to change this parked document as save as complete document is there anything that I can do in this user exit.Can you please tell me the entry help check for the posting key (changing parameter) in the exit?
    Thanks in advance
    Regards,
    Reni

  • How is the posting key determined?

    Hi,
    I have a general question about posting keys.
    What is the logic behind the posting keys (customizing OB41)?
    I think we have 2 possibilities:
    With automatic postings, the posting keys are picked up from the "Account assignment"  in Customizing (OMWB).
    With manual postings, the posting key is selected manually when making the posting.
    Do you have any more information about it?
    Thank you for your feedback.
    Kind regards,
    Linda

    Linda,
    Posting Key is a 2 character numerical key that controls the entry of line items.
    The posting key determines:
    Account type
    Debit/credit posting
    Layout of entry screens
    When you enter a posting, you enter a posting key for each item. This key determines how the item is posted. Posting keys are defined at client level and therefore apply to all company codes.
    The posting key determines:
    The data you can enter in the line item
    How data you post is processed
    How the system updates the data you enter
    Posting keys are differentiated by customer, vendor and G/L accounts. Apart from the General Ledger Accounting (FI-GL) and Accounts Receivable and Payable (FI-AR/AP) components, there are also posting keys for asset and material accounts.
    Hope that helps.
    Nandita

  • New transaction key with the posting key 24 and 34

    Hi,
    i want to create a new transaction key with the posting key 24 and 34.
    the corresponding table is T030B.
    but what is the Tcode/ IMG path to create it?
    Regards,
    Swetha

    Hi,
    Go to FBKP. Click on  Automatic Postings.
    Suppose you want to see the Exchange Rate diff. then click on it. You will see the transaction. Suppose KDB. Then double click on it. Now click on posting keys. The same will be defined in the table which is given by you.
    Regards,
    Jigar

  • I need to use the F12 key as a function key not as volume

    I am using a DOS system for work and need to use the F12 key as a function key and not volume how to I do this....... frustrating!

    Tried that still changes volume

  • I need to use the "apple key" which is, I presume the command key, but I do not have an apple keyboard; is there a key on a logitech keyboard which will serve the purpose?

    I need to use the "Apple key" which I presume is the command key; my computer does not have an apple keyboard; is there a key on a logitech keyboard which will serve the same purpose?

    The "Windows flag" key on PC keyaboard in Commans, "Alt" is option.
    Go to Logitech website to see if they have Mac compatibility software (Logictech Control Center) to make mappings a bit more complex).

  • I need to disable the delete key from going back a page.

    My son is doing online homeschooling. If he is taking a quiz and accidentally hits the delete key to correct a word in his answer the page goes back and he is kicked out of the quiz. I need to disable this function in Safari to protect him from this. Please help.

    HI John,
    That would require remapping. This thread has some links available that may help.
    http://discussions.info.apple.com/message.jspa?messageID=11553590
    Possibly http://www.hotkey.com. You can assign Command + Backspace as a shortcut for Delete.
    Carolyn

  • I am using Firefox for Mac (v 3.6.11, Mac OSX 10.6.4) and need to use the Function keys (specificlaly Ctrl-F7) in a web application. I can't seem to get it to work the same as in Firefox on PC.

    I am using a web application that requires the use of the F7 key. Actually, to be more precise, I need the functionality that you would get on a PC if you hit Ctrl-F7 while in this web application in Firefox. I have changed the Mac's settings to allow standard use of the function keys (rather things like volume up/down, etc.) However, when I try to use Ctrl-F7 it appears to be using the function that is built into Firefox browser rather than the web application running within Firefox. (FYI, nothing happens when I try Cmd-F7 or Alt/Option-F7 either).

    Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
    For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How do I correct the arrow keys to change from lower case to higher case

    The arrow ,   shift key,  will not allow me to change from upper to lower case letters when in I Tunes.    the arrow keys seem to work in every other application.  I cannot properly enter a password  to enter I Tunes.  I reset the password from my note book and the password works.  only the I pad and I tunes are giving me fits.
    charliecache

    the pop-up box comes up just as you said. i then type in the corrected artist's name. i click 'ok', expecting the updated info to appear on the main iTunes library list
    As you have discovered, changing the info on the CD after you have RIP'd it will not change any of teh songs you RIP'd.
    If you select the CD in iTunes and update the info before you RIP the songs, they will go into iTunes with this new info.
    In addition, the CD will display this info if/when you reinsert it into this computer.
    If you only change the RIP'd songs in iTunes, they will display the updated info but if you reinsert the CD, it will display the previous info.
    Best way to do it is to rename the files on the CD before you RIP.

  • I need help changing the security key for WRT54G2 1.5

    I already know the security key on my network, I just need to change it.  I don't have 'cisco connect'. I've tried the web based method with the 192.168.1.1 IP and using 'admin' for the password, but that gives me a '401 Not Authorized' error.  I've tried using my own security key instead of 'admin' and that doesn't work either.   How do I change this.  I tried to use the Linsky's knowledgebase and that didn't help. Live Chat won't help unless I'm willing to sign-up for some paid service plan, and there is no way I'm doing that.  I've never heard of a company charging their customers just to explain how to do something. All I have is a simple question about how to change the network security key when I already know what it is and there is no problem with the connection. Can anyone help me.  PLEASE.

    If admin didn’t work, it’s possible that you might have setup a different password to login to the setup of the router when you initially set it up. Since admin and your security key didn’t work when you tried accessing your router page, the other option for you then is to reset the router. Push and hold the reset button on the router using a pin or a paper clip for 30 seconds and unplug the power cord for another 30 seconds. Once the power light goes solid, you may start reconfiguring the settings of the router. For instructions, refer to these links: Setting up a Linksys router with Cable Internet service & Setting up a Linksys router for DSL Internet connection. Once you establish the wired internet connection, you may then start reconfiguring the wireless settings. Go to the Wireless tab: set the wireless configuration to manual; set a network name; then save the settings. Once saved, click on Wireless Security subtab:  set the security mode to WPA2 Personal and enter a new security key on the passphrase bar.

  • I need to use the 'Ins' key for reverting x,y & z axis co-ords

    Apple selling X3: The Return. However the problem is that the navigational command 'go to' will only take you to x and z coordinates, the pc users then use the 'Ins' key to flip to y axis for the third dimension navigation point. I have tried looking at keyboard mapping but the new aluminium iMac keyboard is an 'Function Key' nightmare compared to earlier version. Any brave soul wishing to answer this one.

    Have to wait for Admin to delete these duplicate message. Sorry peeps!

  • Need to have the delete key in phone dialpad at the bottom

    WIth the new os 7, my iphone 5 phone dialpad's backspace or delete was moved from the bottom to the top. This makes it very difficult to use the phone with  one hand, esp when you make a typo. I have not been able to move my right thumb all the way to the top to reach the delete key. Is there a way to go back to the old phone dialpad where the delete key was at the bottom of the screen or put in a suggestion to apple to bring the old dial pad back?

    all you can do it put in a suggestion: http://www.apple.com/feedback/

  • I need to disable the Fn Keys L530

    Hello,
    I work for a school district and we have online testing. One of the requierments is that all the function keys are disabled. I have search for a solution to do so but have come out empty handed.
    Does anybody know of a solution for my problem? I would prefer a GPO if at all possible.
    Thanks
    Solved!
    Go to Solution.

    You'll probably have to write an autohotkey script to unbind F1 through F12.
    Brightness and volume probably can't be disabled because they're managed at a relatively low level. The other hotkeys can probably be rebound:
    https://forums.lenovo.com/t5/Windows-7-Knowledge-Base/Fn-Fx-key-mapping-for-Windows-7-Thinkpad-Gener...
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Maybe you are looking for