Financial Reportin Studio: Top down reporting, rollup then leaf level

Hi,
I am trying to build a report in Hyperion Reporting Studio. I need to build it so that it is a top down report. I am doing this for the Account dimension. For example I want the report to start with Balance Sheet ( our top rollup) then go down to the next rollups Current Assets then go into the third etc. If you have any questions just ask! Thanks so much for your help!
Thanks,
Noelle

Are you wanting to just display all lines in a top down order or do you want a dynamic reports that starts with Balance Sheet, then the user clicks and it goes to Assets?

Similar Messages

FSI0 - Drill Down Reports for Account Balance Analysis

Any orientation on this issue will be greatly appreciated.
These are the steps I did to create a new Drill-Down Report for my customer.
1. Created and modified a new Form based on the Form for the Financial Statement Analysis 0SAPBLNCE-04 (Periodic Actual vs Actual) using Transaction FSI4 (Create) and FSI5 (Change)
2. Created and modified a new Report with reference to the Form I just created using transactions FSI1 (Create) and FSI2 (Change)
3. I select "Expand: Completely" to see all Account Balances
3. All the totals match between the Original Standard Report and the new report I just created.
4. On both reports, when I select a Balance and then select the GOTO \ Line Items to get the list of documents I get the following results:
==> Most of the cases (I would say probably 80% of the cases) the Account Balance I selected matches with the Total of Line Items that is displayed when I do the GOTO \ Line Items
==> In some cases (just a few) the Account Balance does not match at all with the totals of Line Items that is displayed when I do the GOTO \ Line Items
Can somebody explain why ? Shouldn't the totals match all the time since I am specifically selecting a balance to see all its line items? Where are the missing line items?
Since these are just a few cases my customer is okay with it but he would like to hear a logic explanation why the Account Balance and its line items do not match on this report.

Hello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi

Multi-Use Drill Down Reports?

Hi,
I'm just starting out with reporting in SSRS so this may be a silly question but I'm struggling to find a way to do what I want :)
I have a large graphical report with several top 10 reports on different a cube. (eg. top 10 number of events, top ten numbers of computers affected)
I want drill down reports for both the Event Name and Computer Name, also to be able to click on the header of the report and get a complete unrestricted report. I have created a drill down report that has all the data and if I choose one item (say computer
name) I can drop down to the drill down and filter the table in that with the computer name and return any results for that computer. I cant figure out how to have a secondary link that passes a wildcard to returns all results. I'd also like to have the ability
to send an event name to the same drill down and a wildcard for the computer name. However I cant figure out how to get the filter on the table to accept any wildcards.
I dont want to have to create multiple reports for each of the different drilldowns, is this possible? (Easy to understand answers for a newbie if possible :) )

Hi Chris_C2000,
If I understand correctly, you have configure “Go to report” action in your report. It is Drillthrough in SSRS. You want to pass a value link to the corresponding report. We can add parameters in the drillthrough report, then pass parameters values to the
report.
I have create a simple report in my test environment. Suppose we have the same dataset (DataSet1) in main report and subreport with two fields: CalendarYear, SalesAmount. Please refer to it.
Subreport:
Add a table in the report body, fill with CalendarYear, SalesAmount fields.
Add another dataset (DataSet2) with CalenderYear field.
Add a parameter (CalenderYear) get Available Values from DataSet2 CalenderYear field.
Add filter in the DataSet1, with values below:
Expression: [CalenderYear]
Operator: =
Value: [@CalenderYear]
Main report:
Add a chart in the report, fill SalesAmount in the Values dialog box, CalenderYear in the Category Groups dialog box.
Right click the bar in the chart, click Series Properties.
Click Action in the left pane. Select “Go to report” option.
Select the subreport below “Specify a report” prompt.
Click Add icon below, and fill with following values:
Name: CalenderYear Value: [CalenderYear]
Then, when we preview the report, we can click the specific bar link to the subreport get the corresponding data.
Reference:
http://technet.microsoft.com/en-us/library/aa337477(v=sql.105).aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Drill down Reports created In SPRO to execute in SAP Easy Access

Hi
In customizing which is transaction spro, at the following location Financial Accounting->General Ledger Accounting->Information System->Drilldown Reports you can create drill down reports.
What I would like to know is where can the user execute them from in SAP Easy Access?? There is transaction FSIB (Background Processing) which allows you to execute it in SAP Easy Acces but it wants to print the report and not display it on the screen. Is there a way to display on the screen in SAP Easy Access??
Thanks in advance

Hi,
To run a report either in foreground or background you need to know the report name. To run the report in foreground goto SE38 and give the report name and execute it. If you see the status message " This report is not a type P" then goto SE93 and findout the transaction with the help of report name description. so you can run the transaction. To add the transaction to your role technical consultant will take care.
Bye,
Jyothi.

Connecting BI Web Server with SQL Server Express / Visual Studio Express for Report Development

Hi,
My company is using the Report Builder 3.0 to build the BI Reports ( I guess based on SQL Server 2008 R2). Our software vendor has provided us the web URL to access the BI Server. I want to generate the BI Reports with SQL Server Express or Visual
Studio Express instead of Report Builder 3.0. Need some guidance in this regard.
regards, BI.Developer.

Hi,
Based on my research, if we want to open the report from report server to Business Intelligence Development Studio, we should download the report from report manager, then add this item in Business Intelligence Development Studio. For more details, please
see the following steps:
Type the URL in IE browser to access the repot manager.
Browse to the RDL file folder or location.
Hover over the report, and click the drop-down arrow near the RDL file.
Click on download button, the download window will pop up now. Then save the rdl file.
Click Manage option in the drop-down list, make a note of its Data Source Connection string.
Create a Report Server Project in Business Intelligence Development Studio.
Right-click the Reports folder to open the Add Existing Item dialog box, navigate to the location where you saved the .rdl file for the report, and then click Add.
Right-click the Data Source to verify the connection string is correct.
Besides, please make sure that software vendor had assigned ‘View reports’, ’Manage reports’, ‘Manage folder’ and ‘Manage data sources’ tasks for your account, so that you can download the report and view the data source.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Sorting a Drill Down Report by summary values in Crystal 2008

Hi All,
I'm a newbie to 2008 but have been using Crystal 7.0 for years, so am trying to find the best 'new' way to represent report data I have.
The data consists of various Product details (code, description, colour, size, Category, Sub Category) and Sales details (Units Sold, Net Sales, Gross Profit) for each Product, across several stores.
I looked at the drilldown example report, and this looks to be what I need.
I've got the drill down working, but am having trouble sorting it. What I want to do is show the N best sellers (decided by the user) across all stores, by either Net Sales Amount or Units or Gross profit, as buying for the stores is done centrally.
The data is retrieved from a stored procedure on a SQL 2005 database. Whatever I do, I can't seem to get it to order correctly. I can get the top 10 best sellers by Net Sales using the strred proc code, but they don't show by order in the report. What I need to do is sort by the sum of Net sales, but can't work out how to do this as it appears not to let you select a sum in the sort experts.
Alternatively, a cross tab that spanned a couple of pages would probably work, but I can't find any way of getting the Product details in one row without playing around with a concatenated string i.e. I want code, description, colour, size, Category, Sub Category as one row of the tab, with columns of Units Sold, Net Sales, Gross Profit as columns for each store. I am having the same problem with the cross tab as well - I want to order the rows by the Net Sales total across all stores (i.e. Product with most sales at the top), but can't work out how to do it as the report orders it by Product Name.
Can anyone point me in the direction of a sample or give me some clues ?
Many Thanks
Paul

Hi Paul,
First insert the summary field in the report .
Then within the Report Tab you will get the group sort expert will be highlighted in the options.
In the group sort expert based on Net Sales you can sum the field and get the required order for the top 10.
Hope this helps you.
Regards,
Naveen.

Export current view or drill down report

Post Author: Rainer
CA Forum: Exporting
My Enviroment: CR XI, Delphi, ActiveXReportViewer Hello together,how can I export the current view or a drilled down report with the COM object.I didn't find a way to get the current view object (IReport) I think there must be a solution, because the default export method can export the current view.Thanks Rainer

Post Author: jarrodnewman
CA Forum: Exporting
My setup isn't exactly the same but this might help you: I had this problem with Crystal.Net in Visual Studio 2005. This link helped me resolve it. http://diamond.businessobjects.com/node/1956
My export routine used to just export the ReportDocument object. But this object does not contain any information on the currently displayed group level. So when I built a report modeled very closely after the sample 'World Sales Report.rpt' my export routine would only export the main view even if I was drilled down into other group levels of the report. I learned that the CrystalReportsViewer object is what contains the drill-down level in the ViewInfo.ViewContext object. So the link above solved this for me.
As a side note, I also had to manipulate suppressing and unsuppressing sections on export which can't be done via the CrystalReportsViewer object. So I had to save a copy of the current ViewInfo object to local variable. Then I modified the ReportDocument object to unsuppress and suppress certain sections. Then I set this modified ReportDocument object as the RecordSource of the CrystalReportsViewer object and passed as parameters the new NonHTTPCachedReportSource object and the saved ViewInfo object to my new export routine. This allowed me to preserve the drill-down view properties but apply it to a different ReportSource. I can supply (c#) code if needed. ( I don't usually show the ReportHeader or PageFooter sections in my online view of reports but I need to show them when I export a report)...
- Jarrod ([email protected])

Drill-down Report Customizations

Hello!
First, I'm thrilled having found this resource. I really hope someone can help guide me on the 'opportunity' I have here.
I have created a Shared Analyses report. This report displays a count of Service Requests grouped by Primary and Secondary categories (type and sub-category, respectively)
The report works great. However, the individual viewing the report has the ability to click on one of the rows and drill-down. The drill-down report lists the following fields:
Type (primary category); sub-category; service request no.; service request ID; # of service requests (which, at this level, is always 1)
The question - how can I modify that secondary report to make better sense? I'd like to essentially replace the '# of service requests' column with 'subject'. When I go in to manage analyses I can get to this report by clicking the preview and then clicking on one of the drill-down links (just as the end-user would). However, making changes and saving then results in have this secondary report as the one that shows rather than the top-level report.
I do hope this makes sense. I appreciate any guidance in modifying the drill-down reports.
Eddie

Hi Weesie,
I highly recommend that you order the CRMOD reporting book my Michael Lairson. That book is a great resource for these types of questions. You can find it on Amazon. This book answers this and many, many other questions you might have about designing custom reports. http://www.amazon.com/Oracle-Demand-Reporting-Osborne-ORACLE/dp/0071593047/ref=sr_1_1?ie=UTF8&s=books&qid=1273756620&sr=8-1
Drilldown are managed in step 1 of the Build and Analysis window, via column properties. You can remove drilldowns (if you don't want them to show) by choosing "No Interaction" in the Value Interaction type field on the Column Format tab. You can also have them navigate to a custom designed report (which I think is your question) by choosing "Navigate" in the Value Interaction field and choosing the target under the "Add Navigation Target" capability (which shows up when you select Navigate).
Good Luck and I strongly urge you to order Michael's book,
Thom

Drill down report issues

Is there a solution for displaying fields only on the drill down report with out it displaying on the top main report.
Main report columns:
case id casename location Assignee Asigneegroup
when i click on case id drill down report appears
Drill down report columns:
Task id taskname Assignee assignee group
my question is that i dont want to see Assignee and assignee group on the main report, I just want to see those columns on drill down report. If i remove those 2 columns on the main report (drill up report), then those columns are not appearing on the drill down report as well.

i think a drillfilter will solve the problem
try to add a column and add drillfilter in this column
good luck
Amr

Hierarchy not getting displayed in BPS top down planning

HI
As per our business requirement we have enhanced planning levels 4MP70000 and 4MP80000 to make it as planning function for four quarters. This is working fine as expected but we are facing issues in hierarchy. When implemented from CRM side we are seeing them as indpendent structures and not as hierarchies. Also the constraint that the sum of child node amounts should not exceed the parent node is not getting implemented. We used the hierarchy variable 4MKTHI01.
Please guide us what could be the issue and any help on this is greatly appreciated.
Thanks.

We got the sloution for this:
We need to make the hierarchy setting and tick the check entry box in top down planning layout. Then this is automatically taken care of.
Regards
Sirisha.

KE28 Top-down distribution for only part of the Value Field

Hi Experts,
We have a situation where we will make manual postings in CO-PA through KE21N. Part of this postings will be at the lowest detailed level and part will be for a more summarized level od characteristics. All the postings will flow to the same value field.
We need to make a top-down distribution only for the postings that were made in a summarized level, because the other postings already have the details that we need.
Is it possible?
Kind Regards
Mayumi Blak

Hi Venkata,
Please note that :-
you can not distribute to a characteristic that already contains a
value. Please see note 77476. If you want to distribute to eg.
profit center, then the characteristic must be initial (in the data
to be distributed).
In the case where the log showed "number of receivers" but no line
written is a common problem in transaction KE28 logged by customers.
One example is that, if the amount of line items is 0.00 for all the
receivers, no line item will be written.
No values in reference data:
If there are no values in reference data for some segments (see the
log). No records are posted (segments which were distributed, but
their value is zero i.e. there is no value to be distributed, are not
posted).
No initial values in the distribution level (ie. # - non assigned)
in each of the characteristics in distribution level.
Kind Regards,
Abhisek Patnaik,

SharePoint 2010 Site Web Analytics - Top Pages report not showing complete data

Hi,
I have a custom page in a team site which takes list ID as an argument and shows the relevant data e.g.
../Dashboards/View%20Briefing.aspx?BriefingID=1078
../Dashboards/View%20Briefing.aspx?BriefingID=1079 etc
When i look at the Top Pages report under Site Web Analytics all i can see is data for:
/dashboards/view briefing.aspx
I need stats for individual list items i.e. how many time BreifingID 1078 was viewed etc. Is it possible to achieve this using OOTB reports or can i write a custom report to achieve this? If yes then how...
Any help would be appreciated.
Regards,
Kashif

You’re dynamically filtering content on a single page with values on the query string. Your users are still only hitting one page (View%20Briefing.aspx). Analytics only sees that 'View%20Briefing.aspx' is being hit; it won’t record stats for what’s specified
on the query string.
I expect you could pull this data out of your IIS logs using log parser. Some links on this subject:
http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=85
http://blogs.technet.com/b/corybu/archive/2008/02/26/sharepoint-iis-traffic-analysis.aspx
http://social.technet.microsoft.com/wiki/contents/articles/16072.sharepoint-2010-create-analytic-reports-using-logparser-and-powershell.aspx
http://blogs.msdn.com/b/carlosag/archive/2010/03/25/analyze-your-iis-log-files-favorite-log-parser-queries.aspx
http://logparserplus.com/Examples

Drill-Down Report Printing Problem for Selection Parameters

Dear Experts,
Have tried to configure Drill-Down Report for Vendor Balances,
Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
Input Parameter Screen
Report Output Screen
Print Preview Screen (First Page - Selection Parameters)
Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
Thanks
Regards
P

Hello Ms. Preeti,
Thanks for your reply, Have designed the report through FKI0 (FKI*)
Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
Thanks for your help
Kind Regards
P

After upgrade to Maverick, my macbookpro sometimes will shut down without notice then restart again

After upgrade to Maverick, my macbookpro sometimes will shut down without notice then restart again. During restart it says I have some error so it is shutting down. Dunno what heck is going on here. It has been like this after I updated to Maverick.
What happens? So regret to upgrade to Maverick.
Any help is much appreciated.
Report show this msg:
Anonymous UUID:
AEC00440-A382-ADBC-222D-0C26332AAB85
Thu Apr 3 22:02:40 2014
panic(cpu 3 caller 0xffffff7fa039bfb0): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80bdb05000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.35/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 3), Frame : Return Address
0xffffff808e423230 : 0xffffff801e022fa9
0xffffff808e4232b0 : 0xffffff7fa039bfb0
0xffffff808e423380 : 0xffffff7f9ea22eab
0xffffff808e423440 : 0xffffff7f9eaec49a
0xffffff808e423480 : 0xffffff7f9eaec50a
0xffffff808e4234f0 : 0xffffff7f9ed6b056
0xffffff808e423620 : 0xffffff7f9eb0fb39
0xffffff808e423640 : 0xffffff7f9ea298fd
0xffffff808e4236f0 : 0xffffff7f9ea27408
0xffffff808e4238f0 : 0xffffff7f9ea29531
0xffffff808e4239e0 : 0xffffff7f9f9d37a0
0xffffff808e423a40 : 0xffffff7f9f9d0522
0xffffff808e423ad0 : 0xffffff7f9f9badf6
0xffffff808e423b10 : 0xffffff7f9f9b1d3b
0xffffff808e423b70 : 0xffffff801e4cc7b6
0xffffff808e423b90 : 0xffffff801e4cddb1
0xffffff808e423bf0 : 0xffffff801e4cb81f
0xffffff808e423d40 : 0xffffff801e0b6558
0xffffff808e423e50 : 0xffffff801e026bf1
0xffffff808e423e80 : 0xffffff801e0139f5
0xffffff808e423ef0 : 0xffffff801e01e043
0xffffff808e423f70 : 0xffffff801e0c976d
0xffffff808e423fb0 : 0xffffff801e0f3b46
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.4.35)[1BFF66C1-65E4-3BB3-9DEE-B61C3137019B]@0 xffffff7fa038e000->0xffffff7fa03a0fff
dependency: com.apple.driver.AppleGraphicsControl(3.4.35)[09897896-ACBD-36B5-B1D4-0CCC4000E 3B3]@0xffffff7fa0386000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9e928000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f9e6bb000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f9e980000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7fa0389000
com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63C 159F]@0xffffff7f9e9d3000->0xffffff7f9ec3bfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f9e6bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f9e9c3000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f9e980000
com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56A 3A4AC]@0xffffff7f9ec46000->0xffffff7f9eeeffff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f9e9d3000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f9e6bb000
com.apple.GeForceTesla(8.2.4)[B6C71E9A-E304-354B-80AD-C69C9032D367]@0xffffff7f9f 970000->0xffffff7f9fa3afff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f9e6bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f9e9c3000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f9e980000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f9e9d3000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:
0x000000001de00000
Kernel text base: 0xffffff801e000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 850827343616
last loaded kext at 264945197388: com.apple.filesystems.msdosfs
1.9 (addr 0xffffff7fa04a6000, size 65536)
last unloaded kext at 543414599453: com.apple.driver.AppleIntelMCEReporter
104 (addr 0xffffff7fa049e000, size 32768)
loaded kexts:
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.driver.AGPM
100.14.15
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.6.0f1
com.apple.GeForceTesla
8.2.4
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AppleMuxControl
3.4.35
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleMikeyDriver
2.6.0f1
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.AppleIntelHDGraphics
8.2.4
com.apple.driver.AppleIntelHDGraphicsFB
8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.iokit.IOBluetoothSerialManager
4.2.3f10
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.SMCMotionSensor
3.0.4d1
com.apple.driver.AppleSMCPDRC
1.0.0
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.driver.AppleUSBCardReader
3.4.1
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.driver.AppleIRController
325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.iokit.SCSITaskUserClient
3.6.6
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.5.1
com.apple.iokit.AppleBCM5701Ethernet
3.8.1b2
com.apple.driver.AppleUSBHub
666.4.0
com.apple.driver.AppleFWOHCI
4.9.9
com.apple.driver.AirPort.Brcm4331
700.20.22
com.apple.driver.AppleUSBEHCI
660.4.0
com.apple.driver.AppleAHCIPort
3.0.0
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleSMBIOS
2.1
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
216.0.0
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
216.0.0
com.apple.AppleGraphicsDeviceControl
3.4.35
com.apple.kext.triggers
1.0
com.apple.driver.DspFuncLib
2.6.0f1
com.apple.vecLib.kext
1.0.0
com.apple.iokit.IOAudioFamily
1.9.5fc2
com.apple.kext.OSvKernDSPLib
1.14
com.apple.nvidia.classic.NVDANV50HalTesla
8.2.4
com.apple.nvidia.classic.NVDAResmanTesla
8.2.4
com.apple.iokit.IOFireWireIP
2.2.6
com.apple.driver.AppleHDAController
2.6.0f1
com.apple.iokit.IOHDAFamily
2.6.0f1
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.driver.AppleGraphicsControl
3.4.35
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.iokit.IONDRVSupport
2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.iokit.IOSurface
91
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.iokit.IOBluetoothFamily
4.2.3f10
com.apple.driver.IOPlatformPluginFamily
5.7.0d10
com.apple.driver.AppleSMC
3.1.8
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IOGraphicsFamily
2.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.6
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.driver.AppleUSBMultitouch
240.9
com.apple.iokit.IOUSBHIDDriver
660.4.0
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.driver.AppleUSBComposite
656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.6
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.6
com.apple.iokit.IOEthernetAVBController
1.0.3b4
com.apple.driver.mDNSOffloadUserClient
1.0.1b5
com.apple.iokit.IOUSBUserClient
660.4.2
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IO80211Family
630.35
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOUSBFamily
675.4.0
com.apple.iokit.IOAHCIFamily
2.6.5
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.11
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
23
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.9
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.corecrypto
1.0
com.apple.kec.pthread
1
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Internal Memory Card Reader
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: USB Optical Mouse
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:

nana4design,
some 15-inch Mid 2010 MacBook Pros are known to have a defective NVIDIA GPU. Since you’re getting GPU panics, yours might be one with the defect. Apple had a gratis servicing program for this model’s defect that lasted for three years from the date of the MacBook Pro’s purchase; they still offer the servicing program, but it is no longer guaranteed to be gratis. I’d recommend making an appointment at your nearest Apple store, to have them run their Video System Test on your MacBook Pro to confirm whether or not its NVIDIA GPU has this defect.

Customized drill-down report cannot go to line item level (FGI4 and FGI1)

Hi Expert,
I created a customized drill-down report using New GL features, as follows:
FGI4 create form, with reference to form: 0SAPBLNCE-01
FGI1 create report for the form created.
After that I set some things like characteristic, variables, and output type.
When I execute the report, the data shown cannot be drill-down to line item level:
Goto > Line Item (this function is disabled).
Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
Thanks
sbmel

Hi sbmel,
For calling up a line item report in a drill down report you need to make the below settins:-
- You first have to generate the line item report with program RGRGENSI for your summary table.
- Then assign the generated line item report to the summary report.
Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
Regards,
Gaurav
Edited by: gka2707 on Jul 19, 2010 8:07 AM

Financial Reportin Studio: Top down reporting, rollup then leaf level

Similar Messages

Maybe you are looking for