Financial Reporting batch runs without being scheduled when services restart

Hi,
hopefully someone may have come across this before:
I set up a scheduled batch yesterday (workspace 11.1.1.1.3) pointing at a batch of 2 large reports. As part of the testing I ran it at a scheduled time during the day and it worked perfectly. However the following morning it ran the batch again even though there was nothing in the scheduler (and I checked the scheduled job and it still said last run time 14:29 the previous day). However the snapshots that it produces had been updated overnight. One thing to add is that we shutdown all the Hyperion Services (to allow for a system backup) and they had just come up when the reports ran (could see the batch request in the FR log). Is there a way of stopping this from happening i.e. some setting/config I need to change?
Thanks,
J.

Refer :
http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/ch15s05s02.html
for more details about command line scheduling

Similar Messages

Getting ANT_HOME is set incorrectly or ant could not be located. Please set ANT_HOME. Error while run Financial Reporting Batch Scheduler

Hi,
I am running Financial Report batch file via command line i am getting below error.
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>ant -q -f "D:
\Oracle\MIDDLE~1\EPMSYS~1\products\FINANC~2\bin\BatchAdmin.xml" batch.schedule
ANT_HOME is set incorrectly or ant could not be located. Please set ANT_HOME.
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>
Already i have ANT_HOME =D:\Oracle\Middleware\modules\org.apache.ant_1.7.1 and added to ANT_HOME to the PATH variable. I restarted the system but still i am getting same error.
Please help me on this.
Thanks,
Naresh

Hi Celvin,
Thanks for the reply.
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>BatchName
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>ScheduleBatch
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin\BatchName.xml ht
tp://localhost:19000
D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>ant -q -f "D:
\Oracle\MIDDLE~1\EPMSYS~1\products\FINANC~2\bin\BatchAdmin.xml" batch.schedule
Unable to locate tools.jar. Expected to find it in C:\Program Files\Java\jre7\li
b\tools.jar
[echo] Batch accepted for scheduling: D:\Oracle\MIDDLE~1\EPMSYS~1\products\
FINANC~2\bin\Sch-1.xml
Now i am getting below information when i ran the scheduled batch.
Why i am getting
Unable to locate tools.jar. Expected to find it in C:\Program Files\Java\jre7\li
b\tools.jar
error.How to rectify this problem. How to make to point it to JDK path ? where i need to update ?
I have already set JAVA_HOME setting to JDK path and updated in the "PATH" variable.
Thanks,
Naresh Mopala.

Exporting scheduled financial report batches with LCM

Hi folks. Running 11.1.1.3 EPM here.
I'm trying to use LCM to export scheduled Financial Reporting batches. When I am in Shared Services under Reporting and Analysis, under the Scheduled Objects drilldown, I don't see any scheduled objects yet I have about 200 FR batch reports scheduled on my dev server.
Am I looking in the wrong place to export these or is there another way?
Thanks,
Tom

Sorry I wan't aware the folder structure was different in 11.1.2. I found this on the LCM admin guide:
Default value: This parameter is commented out and the Lifecycle Management engine uses the default file system location on the Shared Services computer; for example:
MIDDLEWARE_HOME/user_projects/epmsystem1/import_export/username@ProviderName.
Do you see it now?

Switches to email tab without being clicked when i recieve new email

So far a D for FireFox.
Chrome was SLoooooow. But FF does things without being told to
This is what I was afraid of!!!!!!
I like to keep my email tab onscreen so I can look at email when it arrives. But now FF switches to that tab without being clicked. when I get new email.
How do I stop this very very aggravating issue? Can't type, cant even click, Nothing will work until the message is seen in "new mail". THEN I can switch back to the tab I'm using.
Also how do I have FF open Adobe reader to view PDFs . All I get is a blank background.

If Safe Mode solves the issue, the behavior will be related to an Add-on.
Just disable all of them and start activating one by one until you replicate the behavior. The last one that you have activated will be the one that is causing the behavior.

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

To see what reports are running, take a look at the execution log views that are available in the database. Which views that are available are dependent on your version of SSRS.
http://technet.microsoft.com/en-us/library/ms159110.aspx
To see which application is using SSRS is a little more difficult. You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses. You can also look at the execution log view to see
user accounts. So, depending on your environment and use of service accounts, this could be easy, or difficult.
http://technet.microsoft.com/en-us/library/bb630443.aspx
If all else fails you can look for clues in the SSRS logs. Good luck...

Financial Reporting batch reports run slow at random

FR reports version: 11.1.2.1
This is a summary of our environment:
-Linux server where Hyperion batch reports run
-Linux (SLES-11) server where Essbase resides
-Windows 2008 server where Hyperion Print Service and GhostScript reside
This is what we observed this morning:
Batch reports are executed serially by a master shell script.
One of these reports takes 30+ minutes to complete. The exact same report usually completes in less than 3 minutes.
This problem occurs 3 to 5 times each morning, and not necessarily on the same report.
While the report shows ‘Running’ in the Hyperion Batch Scheduler, there is no process present on reports server. There is no active session on Essbase. There is no active print process on the print server.
Eventually, the report completes successfully and the pdf file is present on reports server.
We haven’t been able to determine where the process is during the period that it appears to be stuck. The best we can do is to look at the status on the Batch Scheduler. It is not a practical option for us to schedule everything using the Batch Scheduler on a daily basis.(this is what Oracle is suggesting, by the way).
Has anybody experienced similar FR batch reports slowness?
Thanks.

IT parsed the HTML into csv so that another program could compare a Trial Balance from HFM with a Trial Balance from the source GL system to ensure all data got imported to HFM.

Financial Report/Batch report deletion by mistake

Hello Gurus,
We seemed to have deleted one of the Financial Reports and one batch report from the Workspace folder.
Is there any way to check and see if it is stored in some place in the hyperion directory.
Thanks

A financial report is stored in both the RAF relational repository and within the RAF data directory, when you delete the report it will be removed from both these locations.
Cheers
John
http://john-goodwin.blogspot.com/

Weblogic preventing financial reporting and RAF from being accessed

Hi all,
11.1.2.1 (linux)
Web logic has financial reporting and RAF in ADMIN mode which is preventing them beign accessed. All other components are fine. The web server config step succeeded and both products were listed as being configured. I logged into the weblogic admin console and saw all products had a status if RUNNING except for FR and RAF. I tried shutting them down by force and starting them but it restarts, after a minute or so, in ADMIN mode. I have checked the startup mode and it is set to RUNNING.
I have checked the weblogic logs and I can't see any indication of the cause.
Has anyone experienced this?
Thanks,
Nathan

Refer :
http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/ch15s05s02.html
for more details about command line scheduling

How do I build an application that will run without being installed?

I have seen some of the prior posts on trying to do this, but most of them were older, so I'll ask:
Using 7.1, how do I build an application that will run without having to install the runtime engine? I have a client that wants to run serial port monitoring VIs to watch some custom hardware we built for him. His IT dept. won't let him install anything. If I could make this VI run off of a USB thumb drive without needing anything installed on the system it would be ideal. Space is not a problem, so I could include any runtime files needed. Can anyone tell me how to do this?
Thanks

Under what operating system was it running under back in the 90's when it was working?
I think that starting with NT platforms (applies to 2000 and XP, but not 9x) the hardware abstraction layer (HAL) prevented direct I/O to serial ports. Serial port related code that ran fine on 3.x and 9x would not run under NT platforms without modification.
Just some food for thought, do not know if it applies to your situation.
Good Luck
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Financial Reporting Batch error

Hello,
I am trying to create a new financial reporting document for batching, it allows me to select a report but after selecting the report if i press finish i get an error
An error occurred processing the result from the server
"Required application module reporting.batch is not configured"
any solution for this.
Thanks.

Has it ever worked, have you tried restarting servies, which version, if this a new install?
Cheers
John
http://john-goodwin.blogspot.com/

Financial Reporting Studio - Running Total

I am trying to build a waterfall / step chart in Financial Reporting Studio to visualize large movements between prior year and current year profit by profit type. For it, i require a 'running total' of profit type movement. I burst the profit type dimension out on row 2 and i want to keep a running total formula calculation
e.g.
Last Year
This Year
Movement
Total Profit
[Profit Type].Level1 drilldown
Total Profit
I want to keep a running total of the movement in Row 2. How can i do this?

Insert Formula Row and give it formula.

Explicit running of a scheduled portal service.

Hi all, I have created a portal service that is scheduled. I have added the following to the run() method System.out.println(Service is running).
In the component monitor the service indicator is green and running.
Please, can anyone let me know how I can force this run method to run on command or how to debug this portal service. I am just trying to find out when this method is called. So I can see that it is running on the right times.
Is it first called on load i.e. on start of the J2ee portal.
Thanks in advance

Hi,
Can you check up if this is located in the following path.
System Administration ->Support->Portal Runtime
Here navigate to ROOT/WEB-INF/portal/portalapps
Open the folder with the name of the par file and check up if you can locate the jar.
Regards,
Harish
(Please award points in case this helps)

Financial Reporting Batch Scheduler Error - EPM 11.1.2.1

Hi,
I just downloaded, installed and configured 11.1.2.1 on a test server. Defaults were used and all products have been configured to run on the same database (SQL Server). Mostly everything seems to be working, but when I try to open up "Batch Scheduler", I get an error:
Code: 0
Description: ; nested exception is:
com.hyperion.reporting.util.HyperionReportException: ; nested exception is:
*java.sql.SQLSyntaxErrorException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Invalid object name 'FR_SCHEDULER_DATA'.*
I click on "OK" and I'm in the Batch Scheduler window, but then when I schedule a batch, and click on "Finish", I get a Warning "A member must be provided for the Prompt":
Code: 2021
Description: A Member must be provided for the Prompt
The scheduled batch does not show up in the Batch Scheduler window though.
Any ideas on how I would go about rectifying this error?
Thank you
Dan

Hi,
I just realized that I was connecting to an instance of SQL Server running 2000. Redid the deployment against SQL Server 2008 and everything's working fine now.
Thanks
Dan

Financial Reporting Batch Scheduler Failed To Send Email To Users. Version 11.1.2.1

Created a batch and scheduled the report from Workspace to run. Scheduled batch ran successful but the Email is not generated for the user though we have provided the valid email address.
Is this is known issue?

Hi. Check your software configuration to ensure email integration is set up.
Eric

Hyperion Financial Reports - Batch Email Distribution List disappeared

In FR, when you schedule a batch, you can add e-mail addresses to a receipient list. These e-mail addresses can then be selected so these individuals receive the e-mail with the reports attached. Has anyone had the problem where the receipent list completely disappears? We had this happen 1 time back in 2010 just after we implemented and then just happened again today in 2012. Does anyone know the cause? We can add the names back in but would like to know cause so we don't do it again?

What version is this?

Financial Reporting batch runs without being scheduled when services restart

Similar Messages

Maybe you are looking for